Freight cost condition for the whole purchase order (Header relation)

Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
I try to have one freight condition for the whole purchase order.
For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
Any comments and help are very welcome.
Many thanks in advance
Sabrina

Hi,
Fright and discount conditions are called supplement conditon type and  they are always matained with main condition type.
Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
Regards,
shailesh Mackwan

Similar Messages

  • Table name for shipping details for the given purchase order

    Hi,
    Table name for shipping details for the given purchase order
    regards,
    vijay

    Had anybody seen that this question was raised 5 years ago?
    And the question was about where are the shipping details of a purchase order stored.
    The discussion owner hat marked the the discussion a year ago as solved, but did not mark any correct answer and did not tell himself what the solution was.
    The correct answer was given by Amitkumar yesterday, it is EKPV
    I am locking the discussion to avoid that even more wrong answers are added to this particualr question

  • How to get the loaded cost for the Parked Purchase Order Invoices.

    Hi,
    Could any one of you please help me out to find out how the loaded cost is calculated for Parked Purchase Order Invoices which have not been posted. The problem is that if the invoice is posted the ekbe-wrbtr field contains the total amt for any particular line item, i.e. the (material cost + unplanned costs + taxes ).
    But for the documents which are not posted ekbe-wrbtr does not have all the key data fields as that of a posted document. Is there any way out to find the total cost for the line item which is not posted.
    Please try to help me..
    Thanks & Regards,
    Sanjay.

    in that case u have to get the document amt of that accouting Document of PO invoice.
    how --->
    get the IR number from EKBE
    CALL FUNCTION 'FI_DOCUMENT_RECORD'
        EXPORTING
          I_AWTYP            =  'RMRP'
          I_AWREF            =  W_AWREF1----->IR of Po
          I_AWORG            =  W_GJAHR1----->year
        I_AWSYS            = ' '
        I_AWTYP_INCL       = ' '
        I_AWTYP_EXCL       = ' '
        I_BUKRS            = ' '
        TABLES
          T_DOCUMENTS        = T_DOC.--->here u get the accouting document number.
    Regards
    Prabhu

  • Header text dump for the given purchase orders.

    Hello Gurus,
    Could you please help in pulling the report, which contains all the header text and the header note data for the  purchase orders.
    I tried EKKO and EKPO, these tables giving me all the data except the Header details ( we as the end users will make so much of notes in the header of the po).
    Please help me in pulling this report.
    Thanks,
    Chandra.

    hi Chandra
    this seems to be more of a MM issue
    However text is general stored (as pointers ) on the STXH/STXL tables.
    You could try using the function module READ_TEXT  in SE37
    and the object will be EKPO
    kind regards
    Paul Quinn

  • Components for the Subcontract Purchase Order

    Hello All,
    I am trying to create a subcontract Purchase Order, I have created a subcontract Purchase Info Record using ME11 for the Finished Goods and also defined the BOM using CS01. 
    When using ME21N, I have defined the line item as L Category.  In the Item Detail -> Material Data tab, there is a "Components" and "Explode BOM" button.  When I click on the "Components" button, I see the list of raw materials defined in the BOM.  I know for subcontracting that we are able to enter the components manually or can be generated via BOM explosion.  I would like to ask how can I enter the components manually as when I try to delete an item it said not able to do so. 
    Can anyone please help.
    Thanks.

    Hi..
    In Subcontract PO, BOM can be deleted by selecting all BOM line items then go to Edit and select Delete tab .
    To enter the component manually click on Collective Entry Tab in PO BOM and after that you can enter components manually.
    So 1st delete the BOM and then add BOM manually by above procedure.
    But as a standard Practice CS03 BOM only to be changed and then explode the PO BOM.
    Regards
    Vishnu

  • More Vendors for the same Purchase Order

    Hi All,
    a certain Purchase Order has been created with reference to a given Vendor.
    For that Purchase Order, I've checked, have been posted (by MIRO) invoices headed to the vendor indicated in the Purchase Order and another one.
    Could anyone suggest me where this other one has been put in?
    Thanks a LOT.
    Gandalf

    Hi,
    if purchaser order includes a Exice /. customs  related taxes in that cases we are posting these customs expenses to the Govt by treating them as seperate vendor other that original vendor.
    it means there is one vendor for original PO expenses, and another vendor for exicise related expenses.
    Thanks & Regards
    Gupta

  • More Customers for the same Purchase Order

    Hi All,
    a certain Purchase Order has been created with reference to a given Vendor.
    For that Purchase Order, I've checked, have been posted (by MIRO) invoices headed to the vendor indicated in the Purchase Order and another one. Could anyone suggest me where this other one has been put in?
    Thanks a LOT.
    Gandalf

    Hi,
    if purchaser order includes a Exice /. customs  related taxes in that cases we are posting these customs expenses to the Govt by treating them as seperate vendor other that original vendor.
    it means there is one vendor for original PO expenses, and another vendor for exicise related expenses.
    Thanks & Regards
    Gupta

  • Error while closing the open purchase order for MRP run

    HI expets,
                     We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
    regards
    Karthick sundaram

    one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
    Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

  • How can i get different Condition Type for third-party Purchase Order?

    Hi, experts,
    for standard PO my Schema works well. now I want to get a different condition type for third-party purchase order. I try to extend field catalog (Pricing Purchasing). The Field PSTYP exists already. However, it is not provided in the field catalog.
    How could i do?
    Thanks
    Rene

    Hi Rene,
      If you are seeing fields in the field catalog but are not seeing this field when creating the condition table then the field  probably does not exist in the KOMG structure for allowed fields for condition structures. KOMG  represents the total of KOMK and KOMP which are the pricing communication structures. If your field is not there then you need to append it to item data in INCLUDE KOMPAZ in KOMP since this is an item level field. If it were a header level field you would append it to include KOMKAZ in KOMK.  The inclusion of new fields in KOMK or KOMP automatically means that they are also included in KOMG.
    After doing this you will see the field when creating a table. There is further documentation on this process in the IMG under SPRO-> Materials Management-> Purchasing-> Conditions-> Define Price determination Process -> System Enhancements  - View the documentation associated to this node in the IMG
    Hope this helps,
    Matt

  • MRP creating additional purchase requisitions for the existing sales order

    Hi,
    We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
    When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
    We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
    Please advise
    Thanks in advance
    Srinivas

    Mangesh,
    If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
    Regards,
    Prasobh

  • Report for the List of Vendor for which no Purchase order has been created

    Hi ALL
    Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
    regards,

    Hi Prateksha Vaid ,
    Go to transaction S_ALR_87012093
    Select accounts with no purchases checkbox and execute
    Diwakar
    reward if useful

  • How can I get the template( word rtf )  for PO – Printed Purchase Order ?

    I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
    As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
    The template code is POXPRPOL_XML.rtf
    when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
    How can I get the template( word rtf ) for PO – Printed Purchase Order ?
    Thank you,
    Biju Varghese.

    How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
    find by code or name
    open it and you can downloadtemplate by "download" button

  • I had to replace the hard drive on my computer.  I am now trying to download Adobe Photoshop CS6, previously purchased.  I get an error that files are missing after waiting for the whole download.  I have Windows7

    I had to replace the hard drive on my computer.  I am now trying to download Adobe Photoshop CS6, previously purchased.  I get an error that files are missing after waiting for the whole download.  I have Windows7

    The error msg said that the file archive part of Adobe photoshop CS6 is missing and that I need all parts in the same folder.

  • HT1904 when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

    when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

    If you can't scroll to the bottom
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Shipping Costing - Invoice for the FWD Agent

    Hello:
    I am working with PO, Inbound Deliveries and Shippment in order to assign the import costs to all the items related to the shipment.
    I have a concern. I have created a Shipping Cost Document related to a Shipment, This document has a FWD Agent assign.
    Is there a way to register the Invoice (MIRO) of the FWD without having a PO created for the service?
    I have reviewed that in the MIRO, if I select "Purchase Order /Scheduling Agreement" and at the right I put "Planned Delivery Cost", the system brings the cost of the FWD related to that PO,
    The thing is that I want to register the whole cost of the FWD Agent related to a Shipment. So in the MIRO I select "Transportation Service Agent" and select the Shipment N°, but the system is not showing any line items.
    My question is, is there an option of registrating the FWD Agent invoice (MIRO), without a PO created and for the whole Shippment?, And if the answer is YES, how?, maybe some configuration is missing.
    Thanks in advanced,
    Regards,

    A freight PO (service PO) is required.  When you settle shipment cost document,  the service acceptance document is created.  This in turn will either add an entry to the already exist service/freight PO or generate a new service/freight PO (depend on how you configure the shipment cost item category).  This will allow you to create invoice in MIRO using the shipment document.
    The service/freight PO is required because you want to create invoice for the FWD agent.  The service/freight PO is just for a specific FWD agent.

Maybe you are looking for