Freight Cost in Stock Transport Order

Hello:
We have requirement where we want to include freight charges into inventory valuation of material in receiving plant of stock transport order. Is it possible using shipment cost document of LE-TRA module?
If yes, How can I do it??
Also, I want have different pricing conditions like washing charge, Demurrage etc. These pricing conditions are included in pricing procedure. Can I post value of these conditions in different G/L accounts? If Yes then How??
Also I want to crate a multi dimensional freight rate condition using Distance, Weight. How can I do this?
I will really appreciate your response or any docs you have on this subject.

Hi dev,
We did something similar last week. To charge the freight cost to the receiving party we did a manual service entry sheet for that.
We created a separate Po with Transport vendor and the receiving plant and account type is Z shipment costing and service item description as intercompany freight.
You will specify the limit of the amount here, and specify the G/L account here. Now create the service entry sheet withthe freight amount and settle.
I think you can follow the similar thing with additional lines for your requirement for other charges.
Since we want let the receiving plant pay the freight we didn't create the shipment cost document of LE-TRA.
Let see if any other suggestions comes.
Regards,
ratna

Similar Messages

Freight cost within Stock transport order

Hi MM experts,
We have created a stock transport order to shift material from one plant to other plant and want to book the freight cost while receiving the same material at receiving plant during MIGO.
The problem we are facing is, that no accounting document gets generated by the system while doing MIGO against delivery created for STO
The prompt response for the same will be highly appreciated please.
Regards,
Pawan Khurana

Hi
I believe you might be using STO without delivery.
In case of stock transport order, the material document associated FI document will be generated during GI.
So, please display the GI document (mvmt type 351) and check for the FI document.
warm regards
sairam akundi

How to Add Freight to a stock transport order?

We have 2 plants on opposite coasts.
When we transfer goods from one plant to the other, we would like to add the cost of the freight to the inventory valuation in the new plant.
How can we do this?

> 1) U have to use Stock transport purchase orders.
We are currently doing this.
> 2) include the freight conditions in the stock transport pricing procedure .
I see in SPRO --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and Checking Rule, that we are using delivery type ZNL for PO Type UB.
I also see in SPRO --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Pricing --> Define Pricing Procedures for Delivery, that delivery type ZNL has no pricing procedure assigned to it.
Am I looking in the right place?
> 3) assign the pricing procedure to the schemas...
> 4) in the stock transport purchase order maintain the
> freight values against the freight condition
> 5) during goods receipt the freight cost is posted to
> the inventory in the receiving plant.

Delivery costs in stock transport order

Dear SAP experts,
We want to add certain delivery cost in the stock transport order.
We create a new pricing schema with 3 delivery cost conditions "Z" conditions. The new pricing schema is assigned to the stock transport order doc type.
In transaction code me27, when the try tp enter the delivery cost conditions by clicking on the conditions icon, system given an error message saying that "Function not possible for this item". Message No. 06096.
Pricing is as follows -
STKP - Stock transfer price
Z001    10% on STKP
Z002     2% on STKP
Z003     1% on STKP
Kindly help.
Thanks & Regards,

Hi,
Check the following things
1. Make sure manual entry is allowed for Delivery Costs Condition
2. Make sure PO is not yet processed or no subsequent documents exists for the PO so that you can manually edit the PO using ME22N.
Thanks & Regards,

Freight accrual - Stock Transport Order - Moving Average Price.

Hi all
   I am trying to add delivery costs (freight accrual) to Stock transport order, where the material in receiving plant is valuated at Moving Average Price (MAP). So, the freight cost is getting rolled over into the material price in the receving plant because of MAP valuation.
    But my client doesnot want that. Instead we want the freight accrual to post to a expense or COGS freight account. Is there way to control this when material is valuated at MAP in receiving plant?
Thanks
Vamsi

Currently, with the outbound delivery for STO and PGI, the following the accouting document is generated.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10200
Cr Freight Clearing Account                       200
Where as I want the accounting document as follows when outbound delivery is created.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10000
Dr COGS Freight Account                          200
Cr Freight Clearing Account                       200
Edited by: VamsiM on Sep 14, 2011 12:17 AM

Stock Transport order with Freight Charges- Payable to an external vendor

Hello
we are implementing the stock transport order between two plants in SAP 4.7. The document type is UB and it has to be a two step process. We need to post the Freight Charges as well. The freight Provider is external vendor.
What is the best way of configuring this scenario for freight cost?
I did put the freight forearder vendor code on the conditiond tab detail of condition tyep FRA1 but can't do the invoice verification for the same.
Any tips are appreciated.

Hello,
This EhP4 feature addresses only the one step Stock Transport Order to subcontracting vendor for intra company.
Does anybody know how to do a two steps Stock Transport Order to subcontracting vendor for intra company?
By "two steps" I mean:
1- Goods Issue from supplying plant A to in-transit stock of the subcontracting vendor at receiving plant B.
2- Inbound Delivery Notification (IDN) at receiving plant B + Goods receipt against this IDN into the subcontracting stock at receiving plant B.
Thanks and regards,
Stéphane

Stock Transport order - Transport cost on

Hi
What is the best way of accounting for Freight costs on a stock transport order, with and without using Logistics execution and limiting the transactions processed.
For Primary distibution between to plants where the cost are Variable based on km and fixeds based on points.
For intercompany stock transfer,

Hi,
For Logistics execution Enter the freight component in the STO, either based on qty or fixed value, the same can be paid against the invoice verification for the planned delivery cost once the Post Goods Issue / GR is done.
The other option will be a direct FI posting, but the same will not get inventorised if your inventory account is an auto posting account, the same will need to be charged off against some expenditure.
Regards
Merwyn

Stock Transport Order - Material Costs

Hi,
We have created one stock transport order with two parts (for example part A and part B). The problem is, for Part A, condition type Z101 is fetching the cost of current period but for Part B same conditin type is fetching the cost of previous period. Ideally both should be current period.
I have check Material master and also condition type but could not figure this out.
Could you please let me know whereelse I can look for..?
Thanks & Regards,
Samay Mehta

Sanjay -
Ut question is vague.
check the condition records. Some thing might went wrong in setting up the condition records.
Thanks,
Shiva.

Stock Transport Order Pricing Procedure

Dear Experts,
Please let me know the opssibility to configure pricing procedure for STO (Stock Transport order between two plants of same Company code..
Pls explain in detail

Hi,
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condiiton type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08

Problem in stock transport order

Hi all,
In stock transport order in item condition tab is not updating .will it updates are not .If it updates what are conditions are to be maintained
Thanks & regards
vr

hi
plz check configuration as follows
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

OCTROI POSTING DURING STOCK TRANSPORT ORDER

Hi,
We have the following scenario.
Octroi has to be paid during goods transfer from one plant to other. I'll be having an octroi agent who'll be paying the octroi for on my behalf. and the actroi agent will get this amount reimbursed once in a month.
We dont want to load this component to inventory. Ideally we look for a posting like the following during STO delivery.
Cost =100
Octroi=10
accounting entry during goods transfer:
Debit receiving plant - 100
Credit issuing plant - 100
debit octroi Expense -10
credit octroi payable -10
Accounting Entry during Octroi agent payment:
Debit octroi Payable -10
Credit Octroi agent - 10
Is this entry possible in SAP.
If not is there any logical reason why it is not possible.
If possible how?
Regards,
Prasad.

Hi,
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions for Octroi Charges in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Octroi Clearing A/c - Cr - 10 INR (Supplying Plant)

Inv. receipt field for stock transport order

guyz,
when we are creating a normal PO(from me21n), in 'Invoice' tab of item overview screen, we can find following three fields
inv. receipt
GR. based IV
final invoice
however when i'm creating a stock transport order from ME21N, i'm not able to see 'Invoice' tab at all... i thought it couuld be related to document type and its field selection but not able to find these fields in field selection group for po document types....
any help?

Hi,
In case of STO (Document Type "UB"), you will not find the "Invoice" Tab if it is between plants of same Co. Code and if you are using "Supplying Plant" instead of "Vendor". But if you want to do Invoice Verification for Freight/Delivery Cost, etc... you can fill the values for freight conditions in "Conditions" tab page and also assign a Vendor to the condition type itself by going into "Details"
Standard Pricing Procedure - RM2000
And in MIRO after GR (MIGO) > Select this STPO and also select "Only Planned Delivery Cost", it will populate the values and you can do LIV.

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Commitment Item error in Stock transport order

Hi all
I have a stock transport order (STO) for a material non valuated in both sending and receiving plants.
While creation , there is an error with respect to completion of an "committment item" *.
If I input the committment item in STO create transaction in R3 , the STO is saved (permitting blank account assignment for the STO item as intended) and there is no further issue till post goods issue in sending plant or GR in receiving plant.
The problem is however that this STO is triggered from APO and transferred via CIF to R3 while there is no chance to input the commitment item. This results into a CIF error with the STO not created in both R3 and APO.
Is there a way I could bypass this "committment stuff" in this situation?
Thanks in advance
Anton
*The exact error message is as follows;
" No commitment item entered in item 00001 plant < >
Message no. FI311
Diagnosis
The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
Procedure
Enter a commitment item.
If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element. "

Hi,
Did you try using derivation rule using FMDERIVE in case funds management is active.
Please also refer to the link below which guides on the item category to be assigned in Commitment item.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f0/ca5716260211d28a430000e829fbbd/frameset.htm
Regards
K.R

Freight Cost in Stock Transport Order

Similar Messages

Maybe you are looking for