Freight for service order
Hi
Even though freight condition is maintained in the service order, while doing MIRO it is not picking.The service entry sheet is created & accepted.
Regards,
Kumar
Hi,
Why & how freight will come into picture of service procurement ieu2026.For service order.
If you are procuring material, of course you will have freight charge as material need to be carried out physically from vendor place to your company premises but service charge is just like a slab (_service is an activity_, intangible material & as services cannot be stored, does not contain any inventory data) where it may involve of service tax with service base amount. You may need to be re-mapped your business process.
More check link:
Account determination for MIGO/MIRO
Regards,
Biju K
Similar Messages
-
Settlement Rule for service order created based on sales order
Hello,
I am creating a sales order and entering WBS as an cost object.
After creation of sales order the Service order is created.
For service order type in the settlement profile WBS is maintained.
But the system is not copying the WBS in Service order which is maintained in sales order.
Can any body have an idea on this?
Regards
AbhijitHi,
As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
Not what you maintained in account assignment tab of sales order
When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
Kapil -
Pricing date for Service Order and Service Confirmation
Hi,
I cretated a Service Confirmation as followup for Service Order.
Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
I need to check T&C field and Zone field. But, I am not seeing these fields also.
Can you please let me know, where can I find this fields. (In which assignment block).
Thanks,
Sandeep
Edited by: Sandeep Reddy on May 31, 2010 7:21 PMHi,
I think by PRICING DATE they mean BILLING DATE.
In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
This is one strategy you can use.
Regards
Surendra More -
BAPI for Service order creation
Hi ,
Please tell me if any Bapi for service order creation , T-code : IW31
regards,
PrakashHi Prakash,
Have a look on the following BAPIs:
BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
Hope this will help.
Regards,
Nitin. -
hi,
require a FM for Service order Details IW73.
cheers,
Aditya.Did you try BAPI_ALM_ORDER_GET_DETAIL?
Regards,
Ravi
Note : Please mark all the helpful answers -
Plan Assessment and Allocation for Service Orders (CS)
Hello,
I'm trying to run plan assessment (KSUB) and plan allocation (KO9E) for a service order (created via IW31), but I'm not able to do it.
I can do assessments (KSU5) and allocations (KO8G) with real values, but since I'm not able to do it in plan mode, I can't have comparative values between real and planned values (no value is flowing to allocation secondary cost elements).
Can anyone let me know if this is some sort of limitation for Service Orders? Because I checked SPRO in transaction code KOAI and for this type of orders there is no Indicator for Integrated Planning, nor it's possible to assign a planning profile.
Many thanks for any help you can provide!
Regards,
CátiaI created a SAP message and they confirmed that this is not possible.
-
WBS Settlement rule control for service orders
Hello,
We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
For example :
Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
Thanks
RishaHi,
Please go to okg2,
Calculate wip or result analysis
remove the tick for Order In Engineer to Order Production
Now run result analysis and check whether settlement will not happen for cross company code.
please check this and revert back.
Thanking you
Vengaiah Chowdary -
Default settlement rule with settlement type as FUL for service orders
Hi Folks,
Could you please advise me on the below issue?
Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
We have applied the below notes:
Note 313454 - Info: Default value for settlement type
Note 851975 - Settlement use automatic generation creates
Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201DI was also with this problem in 2013 january and only found some information about this, here.
Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
This note was released at 09.06.2014 -
BAPI for Service Orders Confirmation
Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
Thank youTo create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
Regards,
Animesh -
Stage wise payment for Service orders
Hi techies,
stage wise payment for Service orders. Following items are required in SAP while creating & releasing Service Entry. Matter has detailed by following example:
Stage wise payments for an item for eg: Rate is Rs 100 per Rmt.
Item shall be certified as 100% and released stage wise.
Say 60% release on deployment of machinery
Another 20% on execution of work
Another 10% on submission of final bill
Balance 10% as Retention Amount.
Please provide me the solution for release of part rate as explained above.
Thanks in advance,
NBYou,can use Invoice Plan....
In order to work with an invoicing plan according to ur requirement you mentioned, you must maintain the following settings (among others) in
Customizing:
Desired invoicing plan type
Date categories
Date descriptions
Date proposals
You can also specify whether the invoicing dates are to be entered/maintained manually or whether the system is to suggest them.
You can do settings here:
SPRO ---> MM --> Purchasing --> PO --> Invoicing plan --> see here all the settings...
Regards,
eswarmanu... -
How to generate Billing for Service Order ?
how to generate Billing for Service Order ?
Hello,
You may do a resource related billing from the service order, but you need to maintain Resource Related billing profile in Service order --> Control tab. Once it is set you may generate the billing document (debit memo) from service order through DP90, provided the config is right.
Prase -
Object Type (OBJTYPE ) for Service Order & Billing
Hi,
I am developing a report for billed service orders . I wanted to know what is the
OBJTYPE for billing.
In the CRM_ORDER_READ function module we can see
OBJTYPE = BUS2000117 ( For Service Confirmation)
OBJTYPE = BUS2000116 ( For Service Order)
How my report will fetch only those service order details which are billed ?
Is there any common key ?
I am using extracxtors in BW:
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Regards
PKOK, next step could be to have a look to see if Plant is checked (I think it might be) and if you so could create roles on groups of plants which represent each Sales area. It's not perfect but short of changing the code (you could speak to an ABAPer to see if there is a user exit or enhancement point they could use) you could reduce some of your risk this way
-
Printing shop paper for Service Order
Hi,
I can see for service orders (IW31) shop papers are used to print documents. And shop papers are basically written in sapscript. They are configured in SPRO for each order type along with their program name and subroutine name and form name.
But my requirement is I want to show a document currently stored in Business Document Service(OAER) when order print button is clicked. I have a program which currently shows a document stored in BDS in a screen upon executing it. But if I configure that program name in SPRO I get a runtime dump.
Could anybody please help me on that.
Regards,
MainakOK...try this:
in OIDB (notification) remove the selection check for all generic entries - this determines what is shown when you try to print. For example, if you have a setting for doc.type = * and it is checked for selection, each of those will appear when you print. By removing this selection check for doc type = *, it won't appear for yours. You should put a line there for your doc type with the selection checked. If you put a second line there for your doc type without the 'selection' checked - it will show, but be optional when you do a print.
In OIDG (work order), follow the same logic. Once you print the order, it will propose to print the notification as well (either selected or just available). Also, i think you should link the notification and order types in work order config.
This works when you are printing a work order, but i'm not sure if you can print the work order from the notification. I just tried this in my system and did get the notifications to print while printing the work order using the settings i've mentioned. -
Parts reservation for Service Order
Hi,
I have a requirement where i need the function module to retrieve the parts reservation for service order if there is any.Otherwise tell me where i can get the parts reservation for service order.
Thanks in advance.
Regards,
HimanthThanks for giving valuable answer,
what if in the service order i am replacing some spare parts along with services when FERT is not under warranty. How the cost will be transfered to invoice. In my case only one service is transfered.
i waqnted to transfer cost of components as well..
Thanks
SUDIP SInha -
In DP50 Error during material determination for service order
Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
MohitHi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam
Maybe you are looking for
-
Af:table and selectOneChoice, creating a new row resets selected value
Hello, I have a table containing 4 columns, first two are read-only (outputtext) and next 2 contains selectOneChoice , table model is baed on java.util.List adding a new row, works fine but it resets the selectOneChoice(dropbox) selected value to Fir
-
Error while using ajax in jsff
Hi All, I am using JDev 11.1.2.0 to develop my ADF Page I want to use ajax in one of my jsff to us the activeOutputText component for autpmatic ppr I am using the following code : <f:ajax onevent="function(e) {}" event="PropertyChange" render="t1 t2
-
Sharing only users cannot connect to Lion Server
Dear all, I stumbled across a funny problem, that I tried to resolve all day. I just wanted to add a sharing only user for my girlfriends new MacBook that she could use to connect to a shared Time Machine Volume. If I add a new standard user, this us
-
'mac book pro-will not start although logo appears'
Help! Stuck in start up. I shut down using power button as it was hung up and would not respond using force quit. i turned the computer on and it shuts itself down after several minutes. The apply logo is displayed and the band is only partially blac
-
Sync contacts - Contacts on Phone - Computer
Everytime I save a persons phone number on the phone it does not merge or add it self to my computer's contacts? I add the persons name, etc it stays on the phone. ios5 iphone 4s