Freight -Group conditon not getting Reflected at an item level in Delivery.

Hi SAP Gurus !,
I want to draw your kind attention towards my problem.
1.  I had created a delivery with a header freight conditon type ZF00,the same conditon was getting reflected in all the item,But   after sometime i deleted that condition from header conditon tab and saved the delivery.
2. After creating an invoice w.r.t. delivery,system is showing freight amount in an invoice.
3.After i have checked in delivery,ZF00 is still there at item level, even after i deleted that one at header level.
4.Now i want to use the same invoice without freight.(I don't want to cancel that invoice)
Regards,

Hi,
1st of all check with user why the freight cost dont want to transfer to invoice.
Once the invoice is created, you need go to each item individually in the condition type and you can try to delete it from there. But before that make sure your condition type is tick with delete option in the condition type.
Hope my solution can help you get some idea.

Similar Messages

  • Header data not getting updated in line item level

    Hi,
    We are trying to update Pricing date at header level but it is not gettting copied to item level.
    getting an message "The header business data does not apply to item xxxx"
    i have checked the item category and "business item" field is checked. and for the same sales order previously we were able to change the pricing date at header level and it got applied to item level but this time is is not getting applied.
    kindly suggest.

    If there are multiple line items which are having different data; in your case, Pricing Date, then in that case, when you try to change at header level, system will pop up this message.
    You can also have a look at the following note:-
    Note 336660 - Message V1403 in sales order with article order no
    G. Lakshmipathi

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

  • Methodology/Processes Not getting reflected while creating a role via BRM in GRC

    Hello All,
    The methodology I have created is not getting reflected while creating a new Single role.
    I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
    Please suggest.
    Thanks
    Regards,
    Shruti

    Methodology is updated when you press save after completing the first step.
    can you please share screen shots of configuration and issue you are getting

  • Enhancement not getting reflected in Info Cube

    Hello Friends,
    I have made enhancement for getting additional data in the InfoCube 0SD_C03 fro data source 2LIS_13_VDITM .I have made changes in Communication Structure and transfer structure as well . But i am getting the required data in the psa and addition fields are not getting reflected in the infocube . Please suggest me a solution .
    Regards
    Nilesh Vakil

    Hi,
    You have to map the Rules in two Transformations. One for DataSourec to InfoSource and InfoSource to Cube.
    Confirm that you entered all the infoobjects and those compound objects too into the cube, Don't forget to map compound objects in transformation rules. Activate every single object individually.
    Did you create DTP for cube? In BI 7.0 for InfoPackage by default "psa only".
    Aparna.

  • PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM

    Hi experts
    We have tried the below code to dispaly photo in webdynpro integrated with adobe forms
    CALL FUNCTION 'HR_IMAGE_EXISTS'
        EXPORTING
          p_pernr                     = v_obj_id
    *     P_TCLAS                     = 'A'
    *     P_BEGDA                     = '18000101'
    *     P_ENDDA                     = '99991231'
        IMPORTING
    *     P_EXISTS                    =
          p_connect_info              = l_connect_info
        EXCEPTIONS
          error_connectiontable       = 1
          OTHERS                      = 2.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'SCMS_DOC_READ'
        EXPORTING
    *     MANDT                       = SY-MANDT
          stor_cat                    = space
          crep_id                     = l_connect_info-archiv_id
          doc_id                      = l_connect_info-arc_doc_id
    *     PHIO_ID                     =
    *     SIGNATURE                   = 'X'
    *     SECURITY                    = ' '
    *     NO_CACHE                    = ' '
    *     RAW_MODE                    = ' '
    *   IMPORTING
    *     FROM_CACHE                  =
    *     CREA_TIME                   =
    *     CREA_DATE                   =
    *     CHNG_TIME                   =
    *     CHNG_DATE                   =
    *     STATUS                      =
    *     DOC_PROT                    =
        TABLES
          access_info                 = lt_infos
    *     CONTENT_TXT                 =
          content_bin                 = lt_image_bin
        EXCEPTIONS
          bad_storage_type            = 1
          bad_request                 = 2
          unauthorized                = 3
          comp_not_found              = 4
          not_found                   = 5
          forbidden                   = 6
          conflict                    = 7
          internal_server_error       = 8
          error_http                  = 9
          error_signature             = 10
          error_config                = 11
          error_format                = 12
          error_parameter             = 13
          error                       = 14
          OTHERS                      = 15.
      CHECK sy-subrc = 0.
      READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
        EXPORTING
          input_length = <fs_info>-comp_size
          first_line   = <fs_info>-first_line
          last_line    = <fs_info>-last_line
        IMPORTING
          buffer       = l_employee_photo_content
        TABLES
          binary_tab   = lt_image_bin
        EXCEPTIONS
          failed       = 1
          OTHERS       = 2.
    but the photo is not getting reflected in the adobe forms .
    and also i have tried the url method but it doesnt work .
    please help me out .

    First, have you set a breakpoint in this code and made sure that you are getting data into lt_image_bin?  That would seem to be the first place to start.
    Then the question is how are you trying to pass the image into the Adobe Form?  Are you passing an XSTRING context attribute into the form interface?  Have you marked that part of the interface as an image?  Are you setting the MIME Type parameter of the form interface as well.  You really haven't posted any details about what you are doing on the Adobe Form side.

  • Chnages in the Graph properties are not getting reflected in the Browser.

    Hi,
    I have made some changes in the Graph properties in web template,
    Eg. : 1. change in color of a series for a columnar type graph
             2.change in the Text properties of Graph Series..
    When I save the template and try to run in the Browser, these changes are not getting reflected.
    Can anybody help me in this aspect ?
    Thanks.
    Regards.
    Amol Bade

    Same here :´(
    Thanks In Advance
    Juan

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Changes are not getting reflected in Process Chain after changes.

    Hello,
    I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
    Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
    I need some suggestion on this.
    Regards,
    Sanjay

    Hi Sanjay.......
    R u in Display mode..........click on Change mode...........
    If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
    U can try activating it manually or re-transport the active version..........
    Regards,
    Debjani......

  • TDS line items are not getting reflected in J1INCHLN

    Hi Experts,
    While generating TDS challan we are not getting advance line items in J1INCHLN screen
    We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
    Below is the example
    XYZ                                                                         43,000.00
    XYZ                                                                         46,000.00
    Bank                                                                        96,329.00-
    S/Tax Interim-In Cr                                                    5,160.00
    S/Tax Interim-In Cr                                                   3,864.00
    ST Interim E.C-In Cr                                                 103.00
    ST Interim E.C-In Cr                                                 77.00
    ST Inter H E.C-In Cr                                                 52.00
    ST Inter H E.C-In Cr                                                 39.00
    TDS Pble Contractors                                              966.00-
    TDS Pble Contractors                                              1,000.00-
    I checked the below possibilities for reason why its not getting reflected
    Vendor master having recipient type
    WITH_ITEM table updated with recipient type
    In the line item also having Business Place and section code
    Please suggest me is there any way to resolve the issue.
    Thanks & Regards,
    AIM

    Hi,
    Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
    If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
    Regards
    Divya S

  • Reg: View changes not getting reflected

    Hello All,
    I made some view changes like field mapping for the Family Dependents view.
    I Created the Activity and deployed using NWDI but the changes are not getting reflected.
    Please assist me in resolving the issue.
    What might have gone wrong? and how to solve the problem.
    Thanks in advance for the time.
    Regards,
    Pramod

    The issue is with the activities queued up in TCS Deployer.
    Rerun the TCS deployer and the issue is solved.
    Thanks,
    Pramod

  • Support message not getting reflected in Solution manager system

    Hi,
    In satellite system support message is getting created, message number"...." successfully created in service desk.
    When i check in solution manager system in  crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
    Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
    What can be the possible problem.
    Thanks & Regards,
    Balaji.S

    Hi Gurus,
    Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
    Thanks & Regards,
    Balaji.S

  • New Value addition in Restricted List under Rules not getting reflected

    Hi,
    I have created a custom rule for a custom profile. In the rule i have configured a metadata named as Reviewer. Under restricted values of reviewer i have put in 2 values.
    It is getting reflected properly in the profile check in form.
    But now when i add a new value, it is not getting reflected. Is restart required to get that field populated with new value ?. I have already published the schema base and static files.
    Please suggest.
    Regards,
    Boopathy P

    In your metadata field definition, your field is defined as having an option list. Does the value you just added to the restricted list also exist in the overall list of values for the field?
    For example, your list has values "a", "b", and "c". In your profile restricted list, you have "a" and "b". Now have you added "d" to the restricted list, which does not appear in the defined list for the metadata field?

  • Wage group is not getting updated in confirmation.

    Hi
    When confirmation is done through idoc ( type Conf21) then wage group is not getting updated in confirmation table AFRU.
    When confirmation is done through co11n then it gets updated.
    How to get it updated when confirmation is done through idoc.

    Hi,
    In we02 Kindly check if the required field is correct mapped in the IDOC.
    Reg
    DSk

  • Values in parallel flow are not getting reflected

    Hi ,
    I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
    Please help me
    Thanks
    Sailendra

    Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
    This is going to take a knowledge of:
    <li> Correlation - initiate and terminate methods
    <li> Notification using logic from a screenflow and
    <li> Message Wait activity with an Interrupt property
    It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
    1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
    args[] = clientCaseId
    args[] = productId
    Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
    3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
    // this assumes your time interval in your due transition is called "myTimer" and you just
    //   want to stop it
    myTimer = null
    action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
    args as Any[Any]
    args["clientCaseId"] = clientCase.clientCaseId
    args["productId"] = clientCase.products.first.product.productId
    send(Notification, processId : "/DepartmentApprovals",
                                            activityName : "WaitForEarlyReleaseCompletion",
                                            arguments : args,
                                            argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

Maybe you are looking for

  • How to update ArrayCollection at runtime?

    Am facing some problem with arraycollection.. am having an arraycolelction like this... var dpHierarchy:ArrayCollection = new ArrayCollection([ {Region:"Demand1"}, {Region:"Demand2"}, {Region:"Demand3"}, {Region:"Demand4"}] now what am looking for is

  • Print Settings

    Now that Print dialogue is Application dependent, meaning that different settings will be shown for say, a web page than shown for a .pdf document, I cannot find where these settings reside. I save certain received emails as .pdf documents, and later

  • Cats webdynpro - Null Pointer Exception

    Hi all, I am running cats webdynpro application (ess~cat/CatDataRecord) using the portal testid and getting the below dump: java.lang.NullPointerException     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarView.wdDoModifyView(VcCatCalendarVie

  • Customer number and partner functions

    Hi Is there any way to get the details if we give customer number as input and ship to party , bill to party and payer will get as out put whose are diffrent to the customer no. is it possible through SE16 or any standard report for this requirement(

  • RED EYE on the camera--

    Ok people i have been using this z10 baby for almost a month and there r no short cuts here everything almost has a looooong cut so if ur ok with that its a good phone...... I am pretty happy with mine...... battery run time is very good... But still