Freight Material why it is required and what are the configuration?

Hi experts,
My clientsu2019 requirement is they want freight material to be configured in DIEN material type? I want to know why they want this and what are the steps to configure it apart from material master
Plz need your help
Thanks
Krushna

Hi experts Please need your help

Similar Messages

  • GCAC - Ledger comparsion, why we do it and what are the key analysis points

    Hi all,
    I am currently working on a GCAC check reconciling FI/PCA legers to they are in sync. I just want to know the analysis points for the endusers. If you have any suggestions please reply back to me asap.
    I really appriciate your response and cooperation. So many thanks in advance.
    If you have any material pls send it to [email protected]
    Thanks again

    Hi
    As mentioned above, GCAC is to compare the 2 ledgers - GL ledger (00) and PCA ledger (8A) can also be used.
    Comparison between GL and SL doesn't make sense if not all documents are not transferred, or if GL account is altered somehow (maybe by field movement etc..). 
    But it's a good tool to run periodically to make sure the specified leger contains all necessary data.
    Best regards, Kyoko

  • HT201342 Why does this concern me and what are the advantages?

    Why does this concern me and what are the advantags to @Icloud.com?

    It is not an address change but an addition to your current @mac.com, @me.com email addresses.  Use whichever one you prefer.

  • Can any guide me how to gather requirements and what r the approaches!

    HI
    Can any guide me how to gather requirements and what r the approaches and documents.
    Regards
    VSM

    Modeling approach:
    Top down - Try and find out what kind of reports the users need. Based o that you can determine your granularity of data.
    Have to find out what the sources are. Then decide if you have standard content or if you need to enhance or develop new objects.
    Try and see if standard reports are enough.
    If they ned aggregated data, decide on cubes. Then decide what all business areas the reports encompass. Based on that u can decide to build multiproviders or infosets depending on requirement.
    try to incorporate all the keyfigures  and characteristics in your data model.
    then decide how many layer ODS's you might need.
    then come up with a data model accordingly.

  • RAID: What is it and what are the benefits and How to Setup?

    I was wondering what RAID is? How do you set it up? And what are the benefits of having dual hard drives setup in RAID?
    I have a powermac G5 (quad 2.5ghz/16gb RAM/80gb SSD & 1tb HD) and I want to setup my SSD and HD in RAID...would that be wise? Thanks guys!

    Hi-
    One of the best ways to reduce a RAIDs performance is to mix drives.
    Mixing dissimilar drive types should be a shortcut to disaster.
    I would rethink the drives to use for a RAID.
    The most reliable RAID will be from RAID certified hard drives of the same make and capacity.
    After that, you get into software RAID vs Hardware RAID, which both have drawbacks, the latter being price due to the required controller cards and external housing needed for all the drives.
    Hardware RAID will allow for better performance, and allow for use of a RAID 5 or RAID 6 to build in redundancy to protect in case of a drive failure within the set, without losing the entire set.
    A SSD RAID can really offer some blistering speeds.
    I think possibly a bit much for a G5.
    With software RAID, a two drive RAID 0 as scratch for video or graphics work can greatly increase render performance of those respective softwares.
    A two drive boot RAID 0 with 2 WD Velociraptors can increase OS X responsiveness.
    All two drive RAIDs suffer from the need for a robust backup, making a third and fourth drive needed to create a RAID 0+1.

  • What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • What are the configuration changes required to deploy OEM from one VM host to other?

    Hi,
    I have oem setup on one host and corresponding database is on another host. Now i want to deploy both EM and database setup on another host, so what are the configuration changes required to run the setup.

    Check this link, this may be helpful
    http://docs.oracle.com/cd/E25178_01/doc.1111/e24473/ha_outages.htm

  • What are the configuration steps required ?

    Hi
    Gurus,
    Client requires:
    "We have construction going on at our warehouses and the projects are going
    to take about a year.  We need to track retainers on the payments we make to the contractor. 
    Payments are due in a couple of weeks and it is a priority to monitor progress on the construction."
    Example:
                                                                    GL Account#         
    Debit  Construction In Progress                      122000          100%
    Credit  Vendor                                                601095            90%
    Credit  Accounts Payable / Retainage            202000            10%
    At this time we have a request for a solution to process what is necessary
    to compile with the following scenarios.
    what are the configuration steps required.
    Thanks
    Anil

    Hi,
    Whether the contractors are treated as one time vendors or regular vendors. If you have to create new account group for subcontractors
    Does only one account group related vendors need the retainage analysis or for all the vendors. Will be mainly the general contractors at each location  One group is sufficient even they are at different location you can maintain the same in REGION
    Does only single partial payment exists and the remaining due amount to be treated as due on a particular date or multiple payments exists against the same invoice. The 10% must accumulate in a liability account over the life of the contract and is paid at the end. There may be multiple of payments which you need to knock off against the service entry sheet(study above reply)
    The construction cost which is treated as outstanding to Vendor to be exclusive of the cash expenditure made for such construction. Yes, but the entire 100% needs to debited to CIP Until and unless the work is not completed so how you can treat as outstanding payment to vendor. If you want you can maintain a provision for this
    Check with above and above replies.
    Regards,
    Sankar
    Edited by: Durgasankar.Innamuri on Jul 29, 2010 10:17 AM

  • Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

    Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

    Verizon iPhone 4S SIM UNLOCK Tutorial
    SGMD1 Oct 19, 2011 9:40 PM  
    Currently Being Moderated
    Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
    1. Meet the following requirements:
    * Must be a Verizon Wireless customer.
    * The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
    * The line of service must be active at least 60 days.
    * The line of service must be in good standing for the past 60 days.
    * Only one SIM Unlock per line every 10 months.
    If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
    2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
    3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
    4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
    5. Enjoy your new unlocked iPhone 4S!
    ****ALSO I JUST SPOKE WITH NICHOLE (VZN GLOBAL SUPPORT) REGARDING IF THE IPHONE 4S HAS TO BE ACTIVE AFTER SIM UNLOCK AND THE ANSWER IS: NO!

  • I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    your phone has not been compromised.  There have been no viruses, worms or trojan horses ever reported.

  • Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences

    can I interrupt a migration from Mac Book Pro to iMac and what are the consequences

    Les:
    Here are some options:
    • You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
    • You can use an application like Log Me In to access your home computer from your laptop.
    • You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
    Please do post back with further questions or comments.
    cornelius

  • My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

    My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

    We can't know if there's a "fixture" because we can't examine your phone.  But Apple can.  Make a Genius Bar appointment and get your phone evaluated.

  • When is the new macbook air coming..?? and what are the probable updates, both software and hardware..??

    When is the new macbook air coming..??
    and what are the probable updates in both softwares and hardware..??

    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
    You'll want to ask this question elsewhere. "Management" on these boards don't want these topics.

  • Is youview free and what are the benefits of it?

    for BT tv you have to pay £5 a month. How many channels are there on youview and what are the main benefits of it?

    The main YouView channels are the normal broadcast ones and the YouView box allows you to go back up to seven days and pick up programmes you missed from the Iplayer, etc. easily.
    See bt.com/youview for BT's details.
    Richard

  • What are the configuration need between R3 and XI when we use RFC sync adap

    hi,
    What are the configuration need between R3 and XI when we use RFC sync adapter.
    Regards
    siva.

    if its the sender adapter ref:
    RFC adapter
    Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    Receiver;
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    Also;
    trouble shooting rfc/soap -
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

Maybe you are looking for