Freight value print in po

hi friends..
     i am not getting print for the frieght value in po print out...but for frieght/quantiy i am getting the print..
          i checked with all possibilities( with X, S, A, etc..) header wise and also item wise...
    can any one help me where i have gone wrong....
thanks in advance

hi
plz ask ur abaper to look in to the matter
the field of value and condion may not be there in the FORM ur using
IF CIT IS THERE THEN IN m?08 CHECK THAT AGAINST THE CONDITION U MARKED x FOR PRINT
regards
kunal
Edited by: SAP Learner on Oct 29, 2009 8:13 AM

Similar Messages

Tremination while entering freight value

{"We have created an outbound delivery for IG export by yesterday (Out bound delivery no : 80101383). We have got a termination error while generating the standard invoice. The same has been tested day before yesterday with out entering the freight value. We have got the standard invoice. But when we created the same yesterday with freight value we have got the termination error

Hi Sairam,
Thanks for ur reply.
I have maintained the Freight Condition in the header in PO. But since the value has not been entered, it does not show up in MIRO, for Planned Delivery cost.
Secondly, under
IMG> MM->LIV>Incoming invoice-->Configure How Unplanned Delivery Costs Are Posted,
there are only two options 'blank' & '2'. But I want the Freight to be Distributed among items and also to be posted to a freight GL A/c.
Can u pls tell me how to achieve this..
Rgds,

How to copy total freight value from pricing procedure to TAXINN procedure

Dear Experts,
I want to copy the total freight value from pricing procedure to TAXINN procedure , i think i have to use SUBROUTINE for that but can you guide me what is the routine number and in which coloum i i have to use e.g. requirement, or ALt CAl Typ, or cond Base value ???
e.g.
freight condition type (QTY , freight) will enter manually e.g. 100 Rs and material qty 4 so total freight is 400 Rs this value (400 Rs) i want to copy from Pricing procedure to TAXINN
How can achieve this ????
Thanks and regards
Hanumant Nimbalkar

Hello,
If you want to calculate VAT above Freight, then in Pricing procedure make the Sub total as blank for Freight confition types.
And in Tax procedure, make the condition base value as 363 for VAT condition type.
Make the tax code for 4 % VAT and u'll get the desired result.
This will solve ur purpose.
Regards
Prabhjot Singh Nayyar

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

Purchase order with Freight Value

Dear All,
My scenario is....
I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
Regards
Vimal

Hi,
When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
In following path you can decide where this value should add in material cost or G/l account in following path
In SPRO ,Maintain settings as shown MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Regards
Kailas Ugale
Edited by: kailasugale on Dec 14, 2011 10:21 PM

Octroi is not calculating on Freight value

Hello,
We are maintained all the conditions in PO conditions tab. Inclucding of Frieght conditions.
here Octroi is not calculating on Freight value.
If suppose the frieght vendor is different then it is ok to calculted Octri without frieght,
If suppose the Frieght vendor is same as Main vendor then Octri should calculte on including of fright value.
Regards
Mahesh Naik

Hello,
In pricing schema We have given the 361 as ALT CBV to octroi condition (JOCM), to calculate the octroi percentage on Octroi Base value that is basic Price excise dutysales tax.
As per requirement 361, system should fetch the octroi base value from taxation procedure to pricing schema
Regards
Mahesh Naik.

Full freight value for the partial GR

Dear All,
I want to post full freight value for the Partial GR quantity. How do I do it? Freight condition is quantity based.
For example, if I have 100 Ea in the PO and I receive only 95 and GR only 95 Ea. But, I want to post the full frieght value.
Your help is highly appriciated.
Thanks,
Muthuraman.K

Hi Muthuraman
Make fright condition on header level Or make it fixed value in M/06--> control date 1 and keep it in item level.
Regards
Ravi

Table that provide Tax value & Freight Value

Hi,
I wanted to know that in which table does contain the details of the Tax and Freight value paid against the purchase order.
regards
Umakanth.

Hi
If the tax value has been maintained directly in the PO document as part of pricing condition, then check in table KONV.
from EKKO table, you can get condition number EKKO-KNUMV, pass this in KONV, You will get conditios and values.
hope it helps.
regards
Srinivas

Freight value not taking in net value--Urgent

Hi,
While creating purchase order freight condition valude FRB1 not taking in net value.
Please help its is urgent.
Regards,
Ravindra

Hi Ravindra
You need post seperate invoices in case where the vendors are different, If the supply vendor and freight provider are same, you can post both costs in once invoice. Select the goods+delivery costs to make one invoice verification.
In general, freight value will not be added even the vendor is same. Inturn both item cost and delivery cost are processed in one invoice.
If you want, you can include the freght in net by maintaining the freight condition as not an accrual.
But, just for this sake, you should not modify your pricing procedure.
warm regards
sairam akundi

Freight value to add in material cost

HI.
I have freight condition FRA1 i which i ticked Accrual key in M/06,I have assigned FR6 account key to it in pricing.I don't want to calculate the tax on freight ,so i ticked statistics key in Pricing for Freight cond.(FRA1)
Then also freight value is not adding in material cost .
What would be the reason?
Please provide suitable solution.
Thanx & Regards

Hi,
Normally if you mention statistics for a condition, then the value will not add to material cost. You remove the statistics for the condition.
Also check for that condition type, have you maintained accrual check box.(tick mark for accrual inside condition type).
If you dont want to add frieght value for tax calculation, then give the step number accordingly.
Regards,
Prabu

Freight value in PO and Scheduling agreement

Hi,
The freight value getting added with material cost when we do GR against PO, but not getting added with material cost when we do GR against Scheduling agreement.
What is the reason, and how to correct it ? (we required it to get added with material cost)
Regards,
Sattuj

Hi,
Can you please tell me how you maintained freight condition in scheduling agrrements? Did you add them in supplementary pricing procedure... if yes could you do a MIRO for planned delivery costs ?
i am using standard LPA doc type and it does not allow time-independant conditions.. so without removing the "time-d" tick on the doc type.. is there a way taht we can maintain other consiions other than price on scheduling agreement line items ?
regards

Freight (value) always mandatory under conditions

Hi,
I want to maintain that freight (value) costs will be always mandatory for vendors with custom schema. I tried it to set in SPRO>MM>Purchasing>Conditions>Define price determination process> Define calculation schema and under control data for schema for example: Z001 I set that FRB1 Freight (Value) with field manual not checked, field required. You can see result enclosed. There is value zero, and cannot be replaced. This value can be replaced in conditions at item level. But I want to control this condition at document level. I can not find any solutions.
Thank you

It's a standard behavior, you have to entered the condition type manually in header condition, only then you can able to see the amount for condition type as editable.
If the condition type is coming automatically from calculation schema, then you can't enter amount directly in header condition.
You have to enter it manually in header condition.
But as you have maintained this condition type as required in calculation schema, then you also have to maintained it at item level.
You can follow the steps.
1. Maintain the condition type as manual and required in calculation schema.
2. At the time of PO creation :
2A. Maintain the condition type at header level manually.
2B. Then maintain the same in item level manually.
2C. You can see two same condition types in item level. Then delete the Item level's condition type (which is editable (amount) in Item level).
Then check the same.
For more details have a look into the document Freight charges or discount mandatory for particular vendor.

Excluding Freight Value from PO after insert CST Tax Code in Invoice Tab

Hi,
While we are creating PO, in Condition insert Freight & CST Conditions.
Problem is that when we insert the CST Tax Code (C2) under Invoice Tab, then Freight Value should exclude from the Conditions. So, user have to insert CST Conditions manually in PO.
We want that when we insert the CST tax code in invoice tab, CST value calculate with Basic Price and should no impact on Freight Value.
Plz guide..

Hi,
Have a thought to capture freight cost to be captured in separate G/L,
1.Select freight condition type in M/06 ,go to details & select accrual flag in control data 2 TAB & save.
2. Also for freight condition type in M/06 , select delivery cost(B) in condition category in contorl data 1 segment.
3.Have account key & accrual key for the freight condition type in calculation schema in M/08.
4.In OBYC, you need to assign account key with your Freight G/L.
In PO, you can see all value & NET Price is calculated without freight cost. Now you can have a logic( in tax procedure) to calculate all taxes from BASE AMOUNT(BASB) from net price.
Regards,
Biju K

Condition type - Freight value is copied into invoice from sales order

Hi All,
I have a Issue while copying freight value to Invoice.
I have created Freight condition type - XYZ where i have maintained "Group condition, Header condition & Item condition" in the definition of the condition type.
I have placed this condition type in Pricing Procedure (Ex: ABCD) and also in Delivery Pricing Procedure (PQRS) - Checked "Manual check box".
When i place this manual condition type in Delivery --> conditions tab(Item level), then it is copying to Invoice. However when I am placing this condition in Sales Order it is not copying into Invoice???
I have maintained copying control between delivery document and Billing document and I have maintained "Price Source" as E - Delivery/Order.
My requirement is when I am maintaining Freight value in delivery, then it has to consider the Delivery Freight..If freight is not maintained in Delivery then it has to copy from Sales Order?? Is it possible ?
Please help me in this regard.
Thanks in Advance.

Hi,
Thank you very much for your response.
If i used price source as "D" then other conditions like price & tax are not copied sales order. Freight value is copying from delivery. I want system has to consider the sales order in case of freight value Zero in delivery.

Wrong accounting entry for FRB2 (Freight Value)

Dear All,
Wrong accounting entry is happening for Freight value for a standard PO.
Rs. 300 was maintained in PO for this condition type, GR is done for full qty. but Accounting entry is Material cccount Rs. 156.24 to Freight clearing account.
Please help me on this issue
Regards
Prashant Atri

PO was created with 3 line items with each line item having freight condition type FRB2 - Freight value
For first line item it is Rs.200 for 1,008 quantity
For Second line item it is Rs.300 for 7,200 quantity
For Third line item it is Rs.300 for 2,604 quantity
GR was done for 3rd line item for the entire PO quantity 2604, but the frieght value is flowing only Rs. 156.24
1) Material is valuated at Standard Price.
It is Valuated at MAP
2)Condition type- FRB2- Rs 300 is entered at the Header Level and it is marked as a Group condition because of which it got apportioned to all the line items in the Purchase Order.
It is entered line itemwise with Rs.300 to the third particular line item and there is wrong flow of freight value for other line items too in GR.
Is Freight Condition type is a header condition and also check is it a group condition ( in t.code: M/06)
It is a header condition but not group condition and the values for frieght were given line item wise.
Need help to resolve this.
Edited by: prashantatri on Sep 2, 2011 12:14 PM
Edited by: prashantatri on Sep 2, 2011 12:15 PM

Freight value print in po

Similar Messages

Maybe you are looking for