Frequency of  sapteched seminar is INDIA

is this SAPTECHED seminar is schedules only once in a year in INDIA  ?
can any of you say me what is the frequency of this ?

Hi susin,
Sapteched is one of the amazing event.it will happens in different parts arround the world.as it have to cover the entire proffesionals of world.it will happen only once in a year at seleted countries. if you want to participate in a year more than once . you can participate participate....at your own expenses.this year it is happenig in india at banglore in novemeber 10-12(i think).
happy participating.
thanks
karthik

Similar Messages

  • News Updates / Seminars in Dubai

    I live in Dubai for the past 1 year, and I have update my Latezt Address also a year back, But I am not receiving mails about Happenings in U.A.E.,I am getting mails about Seminars in India. What could be purpose of it.I need an immediate Solution
    Shareeq
    00971504789797

    If you're updating the content only then no you're fine.
    .. unless you changed the product ID associated with the retail folio in Folio Producer (?)

  • Certification during SAP TECHED

    Hi All,
    Can somebody pl. tell me if SAP is going to provide certification during  SAPTECHED 07 in India.
    Regards,
    Tushar

    Hi Tushar,
    Yes! Certification will be offered at TechEd Banglaore '07.
    Below please find a listing of the exams being offered. Information regarding dates/time and the registration process will be posted on the TechEd site in the coming week.
    Thanks,
    Richard
    Exam Code     Certificate Title
    P_ABAP_GUI_70     Certified Professional Developer - SAP NetWeaver ABAP - Graphic User Interfaces
    P_ABAP_SI_70     Certified Professional Developer - SAP NetWeaver ABAP - System Integration
    C_TAW12_04     DEV.CONS. NW04- APPL. DEVEL. FOCUS ABAP
    P_ADM_SYS_70     Certified Technology Professional - SAP System Administration
    P_ADM_SEC_70     Certified Technology Professional - SAP NetWeaver Security
    C_ADM_ORA_70     Certified Technology Associate - SAP Web AS Platform with Oracle
    C_TADM51_04     TECH. CONS. SAP NW'04 - SAP WEBAS ORACLE
    C_TBW45_04S     Solution Consultant SAP NetWeaver '04s – SAP BI
    C_E2E100_07     E2E Root Cause Analysis
    C_E2E200_07     E2E Change Management
    C_JAVA_70     Certified Associate Developer - SAP NetWeaver Java
    P_JAVA_70     Certified Professional Developer - SAP NetWeaver 2007 Java
    C_MDMS_04     Certification Application Associate – Master Data Management 5.5 (SP04)
    C_SMI310_06     Solution Consultant SAP Solution Manager 4.0 - Implementation Tools
    C_SOA100_70     Enterprise Service Architect- L1
    C_TBIT44_06     Certification Development Consultant SAP NetWeaver 2004s

  • Tax Analysis Tool | Report | SAP B1 | Localisation India

    I don't know why this thread is not displayed same as I have typed in
    Hi Solution Development Team,
    I guess you are aware of the poor status of legal reports offered by SBO in country india version (I am aware of merging of A,B,C in new version 8.8).
    I fore see if a Tax Analysis tool / Report provided same on the line of Sales Analysis already available at present, then it can be of great help to customer in following ways.
    1. In India the frequency of changes in Legal tax structure is veri high, so even if all the as of date reports are developed then it can change any time.
    2. The proposed solution can be suggested as work around to customers/users.
    The desired tool/report should work as below
    1st Input parameter screen should collect following information from user (you may add more)
    1.a. From Tax Category
    1.b. To Tax Category
    1.c. From Tax Type
    1.d. To Tax Type
    1.e. From Tax code
    1.f. To Tax code
    1.2. Tax combination
    1.3. Select From Date (Posting / Document)
    1.4. Select To Date (Posting / Document)
    1.5. Transaction category (Optional reference A/R Invoice Tax Tab)
    1.6. Check Box ( Multiple choice A/R Invoice , A/P Invoice , A/P and A/R Credit Memo etc Marketing documents same as available in General Ledger report)
    1.7. Radio Button (Summary OR Detailed)
    Once user provides above details then in 2nd screen system should provide following data filterd based on criteria given in 1st screen
    01. BP code and Name (Customer/Supplier)
    02. Document Type
    03 .Document No.
    04. Document Date and Posting Date in separate columns
    05. Item (multiple line for same document only in case of Detailed is selected in 1.7 above)
    06. Tax Category (multiple line for same document only in case of Detailed is selected in 1.7 above)
    07. Tax Type (multiple line for same document only in case of Detailed is selected in 1.7 above)
    08. Tax Combination (multiple line for same document only in case of Detailed is selected in 1.7 above)
    09. Tax Code (multiple line for same document only in case of Detailed is selected in 1.7 above)
    10. Base Amount
    11. Tax Percentage (depend upon the Tax code / Formulla)
    12. Total Tax Amount (as per the choice made in 1.7 above - total document tax in case summary is selected)
    13. Document Total as applicable
    14. Transaction Category
    15. BP Tax Info. Columns (VAT No. / Service Tax No. PAN No. etc all)
    Also bring other columns which you find relavant, user should have option to make visible using form setting
    The chalange I guess in this reporting/analysis is to display tax parameter code wise amount in column format which is stored in row format in system per item line (for reference see details displayed in link of A/R invoice Tax amount column).
    Best Regards,
    Samir Gandhi

    No Body responded very strange !!!!!

  • What are supported sampling frequency and digitization rates for Zen Micropho

    Some MP3's are playing back slowly. It is inconsistent, though, since files with the same digitization rate and sampling frequency will behave differently - some right speed, some slow.
    The bulletin board says:
    "My tracks don't play at the correct speed e.g. they play too slowly, why?
    Chances are they are encoded in an unsupported sampling frequency..."
    How do I find out what the supported sampling fequencies and digitization rates are?

    Thanks for the info. I guess I was looking for something more specific - the exact bitrates and sample rates that Creative claims to support. Would you know where official and comprehensi've data can be had? There must be a tech spec somewhere.
    It is common these days in business to see a recording of, say, a conference call or seminar presentation at 32k bitrate/025Hz, or even 24k bitrate/8000Hz, posted to a company's website for download by those who could not be there, and MP3 players are increasingly used for their replay. Companies use low digitization rates because there is no need for hifi and the files are much smaller: less storage, faster download.
    I'd be surprized to think that Creative don't have compatibility with the standard range of rates offered by ubiquitous programs like Audacity and dBpower, the latter being one they themselves recommend!

  • Taking my iMac from  USA to India - Power Cord

    I am taking my iMac from USA to India. Can anybody tell me if my computer supports the Indian power voltage Do I just buy a new power cord that plugs into the Indian Power sockets or will I need to use an Voltage Converter.
    As far as I know US has Electricity at 110V/60Hz, India has it at 230V/50Hz.
    IMac Intel Core Duo, 2GB RAM, 500GB HD   Mac OS X (10.4.8)  

    From the iMac Specs page;
    Electrical and environmental requirements
    • Meets ENERGY STAR requirements
    • Line voltage: 100-240V AC
    • Frequency: 50Hz to 60Hz, single phase
    • Maximum continuous power: 180W
    • Operating temperature: 50° to 95° F (10° to 35° C)
    • Storage temperature: -40° to 185° F (-40° to 85° C)
    • Relative humidity: 5% to 95% noncondensing
    • Maximum altitude: 10,000 feet

  • Can I use my BB Z10 in India???

    Hi,
    I have bought BB Z10 in Nigeria & using there. Now I am in India and change my SIM but Phone is not detecting my new SIM. Why??? what is the solution ???

    Hello,
    Two things I can think of...
    1) Your specific Z10 model (there are 4) must be capable of working with the radio frequencies of your carrier network...refer:
    http://www.bbin.in/en/2013/03/03/4-types-blackberr​y-z10-models-fits-better/?utm_campaign=4-types-of-​...
    2) Your BB must be carrier unlocked...check here:
    Homescreen > Swipe Down From Top > Select Settings > Security and Privacy > SIM Card
    In the bottom section ("Phone Network Lock"), if any items do not say "Unlocked", then your BB remains locked to it's original carrier, and must be unlocked before use on any other carrier.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Job name and Job frequency

    Hi All,
    Can any one help me out in finding the Job name and Job frequency.
    I wanted to know the Job name and Job frequency for eash & every message type specified in particular Partner Type in we20.
    For example:
    Let suppose my partner profile name is some country name like 'INDIA'.Ok. For Partner Name 'INDIA" we have some message type, message variant as Outbound and Inbound Parameters.
    Now,there might be some Job running on background to process these message type.
    I want the exact name of the Job Name and Its frequency.
    Thanks

    Hey
    Please ask the function people what is the business logic they have configured.usually we activate change pointers for any IDOC and as soon as any changes are made for that IDOC,it is triggered.the functional person will tell you at what stage they are posting this IDOC.
    RBDMIDOC is the report which is used for creating IDOC's based upon the change pointers.but there are other ways too in which IDOC's can be triggered,so you would be better off asking the function person.
    Thanx
    Aamir

  • PCI-6280 (M-series) digital frequency measurement

    Hello,
    I am trying to use a PCI-6280 board with NI-DAQmx and C++ to measure the frequency of an approximately 36kHz external digital clock source.
    I have been playing with the "Dig Freq-Low Freq 1 Ctr" example in the NI-DAQmx ANSI C examples directory, trying to get it to work. All I have gotten so far is error -200474 -- "Specified operation did not complete, because the specified timeout expired" -- in response to the call to the DAQmxReadCounterScalarF64() function.
    I think I am connecting the external clock source to the wrong input terminal.
    I am connecting the external clock source to pin 37, which the documentation says is the Ctr0 source terminal. I have also tried the other Ctr0 terminals (gate, aux, and out) and no luck.
    What am I doing wrong? Where should I connect the input signal so I can successfully measure the digital frequency?
    Any help will be appreciated! Thanks,
    Markus Svilans.

    Hi Markus,
    In order to measure frequency you need to connect your signal to the GATE of the counter (in your case this is pin 3). All counters use the Gate to take time measurements (for example period and frequency). Here is a good resource on this.
    Hope this helps!
    Abhinav T
    Applications Engineer
    National Instruments
    Abhinav T.
    Applications Engineering
    National Instruments India
    LabVIEW Introduction Course - Six Hours
    Getting Started with NI-DAQmx
    Measurement Fundamentals

  • TechEd 2008 India is worthful for Beginner ?

    Hi Experts,
    I am new in SAP ABAP and want to join the TechED 2008 in india. But As I have just switch my career to SAP ABAP , so I am wondering whether it is really helpful for me to take part in it.
    I am more concern about the OOPS concept , so When I am trying to search the sessions which is listed for 2008 techED, I am not able to find any topic related to OOPS.
    Please kindly give me advise which course id more suitable for me as beginner.
    Thanks in Advance .

    Hi,
    Yes it will be Useful for you definitly.
    Because you are Beginning of the SAP career ,in TechEd Session you will get so many sessions on diferent SAP Technologys.
    see the below link for the Sessions which will be Conducted in the TechEd.
    http://www.sapteched.com/india/
    Govindu

  • Will the T Mobile unlocked iPhone 6 be compatible in India?

    Will the T Mobile unlocked iPhone 6 be usable in India? Can it be used as it is in Indian GSM networks without any unlocking required? I asked my friend who lives in Connecticut to enquire in a  T mobile store where the seller told him that it will be locked for 90 days. Is it so? I could not contact live chat support. Please help.

    Firstly, the T-Mobile phone is NOT unlocked, but rather contract/sim free.  You don't buy the phone directly from a T-Mobile store or the phone will be locked, but you need to get your friend to go and buy the T-Mobile phone contract free directly from the Apple store.
    This phone comes with a T-Mobile sim card, but the trick is to take the T-Mobile sim card out of the phone when you receive it and put your local sim card into the phone and then activate it and then it will remain unlocked.
    Remember though that if this phone comes from the US, you will have no valid warranty on the phone for India, as iPhone warranty is not international, so if anything goes wrong with the phone, you have to physically take it back to the US - no shipping accepted.
    The phone will also not support 4G/LTE, due to frequency differences.
    There are no unlocked phones for sale in the US yet, but if you want to risk the T-Mobile phone, then get your friend to go and buy the T-Mobile contract free phone directly from the Apple store and NOT a T-Mobile store - if you go to T-Mobile, then the phone will be locked, but if you get it from Apple, you should be able to take the T-Mobile sim card out of the phone and then activate it with a local sim card and the phone should remain unlocked.
    It is only if you activate with the T-Moible sim card that you are in trouble.

  • Configure WTK With Platform details (Processor,memory,clock frequency,etc.)

    Hi All,
    For our Midp Application, we are using Sun WTK 2.3 beta version & j2sdk1.4.2_13 which is running on three different Desktop PC's with different processors speed & RAM. we are also using IBM Rational Test RealTime tool for profiling the results.
    below is the profiling figures of my MIDP Application on three different PC's.
    Function Time F+D time
    PC 1: 3594 3594
    PC 2: 20 30
    PC 3: 1428 1427
    Note: The figures given above is in Milliseconds.
    we had also configure the Sun WTK 2.3 beta version & j2sdk1.4.2_13 in IBM Rational Test RealTime tool for profiling the results of my MIDP Application.
    Queries:
    Q1: is there any way to set the WTK or Emulator parameters as real time Device configurations like (Processor,memory,clock frequency,etc as real time device.
    We are also having a Profiling Tool called RVDS3.0 ,it has armulate.dse file, which allows us to change the parameters of any target device but unfortunately it doesnt support MIDP Application for profiling.
    Regards,
    Mukesh Kumar,
    India,
    Bangalore.

    Hi,
    i agree withyou , since the vm behave differently on different PC'S, there what i am looking for WTK Settings for a particular set of devices, let us say, if i want to test the series60 Profiles using WTK , then i have to setup the same enviorment in wtk.
    any ways,
    i am trying to integrate the nokai_midp sdk with wtk and trying to profile on different PC's.
    -Mukesh Kumar,
    India,
    Bangalore.

  • How to contact MSI Authorized personnel for/from Bangalore, India.

    Hello,
    I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer and took it back to the same shop. The sales person most probably misguided me that the motherboard is at fault and made me RMA the motherboard.
    The MSI RMA center D-LInk people made me wait 1 month and then have given me a P7N Platinum, but a much older motherboard and now the 3D application are working really really slow and the monitor keeps freezing for fraction of seconds, before changing to the next frame.
    The previos motherboard used to display all the 3D applications fine.
    Could someone give me the name/phone number for me to contact MSI Authorized personnel for/from Bangalore, India as I am not happy with the service provided by D-Link and feel cheated having bought a MSI product.
    Thanks.

    Quote
    As far as I remember, the original motherboard in the bios setting had PCI-E frequency set to 200, I do not remember if the PCI-E frequency on that board started from 200 or ended at 200?
    Sorry, but you must be mistaken.  The defaul PCI Express Frequency is 100 MHz.  Setting it to 200 would most certainly kill your board or the video card.
    Quote
    I do not find an appreciable performance boost when I take this setting from 100 to 170
    Good lord, what are you doing there?  Do not set the PCI Express Frequency to 170 MHz unless you want to blow something up.   
    Quote
    If I set the PCI-E frequency at 200, the system hangs, there is no video on the monitor
    That is normal.  Please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.  Under no circumstances should you raise the PCI-E Frequency to 200 MHz.  That's is what you do if you want to actually kill something.
    I hope you are lucky and have not blown something to pieces yet.
    Quote
    Could someone enlighten me on the starting and ending frequencies of PCI-E on the latest motherboards MSI P7N Platinum 750i chipset.
    The default PCI-E Frequency is 100 MHz on EVERY Mainboard.  ... and that is also where it should stay. 
    Now, please provide full system specifications. Read the >>Posting Guide<<.
    Quote
    As you can see the replacement is much older.
    As I already pointed out in my last post:  This does not really atter.  Check the PCB Version (it is printed onto the PCB, right next to the model Number (MS-7380).  If that it is the same PCB Version, you received exactly the same board model.
    Quote
    I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer
    What problem did you originally have?
    Did you install the new board you got yourself or did the shop do that for you?

  • Supported bit depth and sampling frequency

    Hi,
    Is it possible to determine at runtime what sampling frequencies and bit depths are available for audio capture -- other than by trial and error? It does not seem that way from the API, but maybe I missed something, so I decided to post a question here. The only thing I was able to find so far is that 8-bit PCM WAV is required to be supported by all devices that support audio at all.
    Thanks in advance for any info!
    Sergei

    Thanks for the info. I guess I was looking for something more specific - the exact bitrates and sample rates that Creative claims to support. Would you know where official and comprehensi've data can be had? There must be a tech spec somewhere.
    It is common these days in business to see a recording of, say, a conference call or seminar presentation at 32k bitrate/025Hz, or even 24k bitrate/8000Hz, posted to a company's website for download by those who could not be there, and MP3 players are increasingly used for their replay. Companies use low digitization rates because there is no need for hifi and the files are much smaller: less storage, faster download.
    I'd be surprized to think that Creative don't have compatibility with the standard range of rates offered by ubiquitous programs like Audacity and dBpower, the latter being one they themselves recommend!

  • Iphone purchased and gifted to an india person with non contract apple iphone.  it can use in india or not

    Iphone purchased and gifted to an india person with non contract apple iphone.  it can use in india or not

    If it is an unlocked iPhone, GSM model, it should work though will not likely work on an LTE network...those are not consistent in frequencies.
    But, keep in mind that the warranty is only valid in the country of sale.  If there is a problem with the iPhone, there will be no support for it in India.  It will have to be returned to the country of purchase for service support.

Maybe you are looking for