Frequency of video HDV 720p50

en Adobe Premiere Pro CS4 si crea un proyecto nuevo y vaya a la pestaña presets secuencia entonces a la carpeta HDV se limita a 720p30 HDV, pero tengo un video grabado HDV 720p50, so there is any workaround or plugin that you could recomend me.
thanks forward.

Can you select a Desktop Preset, and then customize the FPS to match your source footage? The regular Presets are for general media types/specs. For other source footage, Desktop allows one a great deal of latitude.
Good luck,
Hunt

Similar Messages

How can i download video hdv minicassette footage from my sony video camera with no fire wire port?

How can I download video HDV minicassette footage from my sony video camera with no fire wire port?

Hi,
Are you talking about your computer which has no firewire port ? If YES you can have one of two options:
(a) Use FCI - Firewire card like this (preferred)
You can buy from this:
http://www.ebay.com.au/itm/2-Ports-PCI-Express-PCI-E-IEEE-1394A-Firewire-Adapter-Cable-Card-/1507023...
(b) You can also use USB-Firewaire adapter like this:
http://compare.ebay.com.au/like/120580625092?ltyp=AllFixedPriceItemTypes
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print to video HDV not working

I'm having problems with printing my HDV project to the camera.
On a DV project it works, but when I open my HDV project I cannot choose any external video options,
I can log and capture, but not the other way.
I read that the edit to tape function does not work in HDV, but printing to video should.
Just don't know how
Maybe someone can help me
Thank you!

If it's a sony camera involved, select the "Easy Setup" that matches the sequence setting... like 1080i for example, and see if this doesn't clear things up. Make sure the camera is in VTR mode as well. If it's not a Sony camera check the settings it uses here: http://www.apple.com/finalcutstudio/resources/devicelist.php
Jerry

Print To Video HDV dropping out

When I try to print to video from the computer to a Sony HDV 1080i deck it goes and conforms all the video then I start the process and it works fine until a certain spot and will go to black then back on again etc.
I've tried this a few times and at the same spot will get the problem so I checked to make sure it wasn't the tape, I threw away the rendered files and re-rendered them again. I even saved the project to a quicktime movie which played back looks fine. I tried to use the quicktime file and it stops at the same place everytime.
Any suggestions?
I even went and rendered all of my sequences, mixed down the audio etc.
thanks in advance!
Just recently went from FCP 5.1.2 to 5.1.4 I did another project last week and the print to video worked out fine I was wondering if this was a bug in 5.1.4?
Using FCP 5.1.4

conforming and decoding the mpeg2 HDV stream seems to be the hardest thing for the computer to do. Enough RAM, and a beefy video card will help. I think it's a miracle every time I can get a batch of HDV clips to sucessfully capture. Cutting doesn't go too bad, but I have found outputting native HDV to be nearly impossible.
We had about 3 hours worth of 10-15 minute segments to output, and it took close to 3 weeks of constant effort, outputting one sequence at a time. It would black out, stop playing back, freeze up, put all kind of breaks in the timecode even if you pre-stripe the tape. And all the while it would never, ever alert or abort on dropped frames, timcode breaks, etc.
One of the big problems was rendered material. I used a page peel transition (I know, I know, it was a video cookbook, gimme a break) in the HDV segments. I took the time to set up each one with an image for the "back" of the page from the context of the segment. Rendered playback from the timeline looked fine, but as soon as I went to tape, the background of each peel would display whatever image I had most recently applied - all of them - but only on output. I wound up having to replace the backgound of each one one at a time, export each transition as a self-contained movie, bring it back in as clips and re-sync it with the surrounding media. Luckily there were only about 150 of them to do. All this I started doing after the first solid week of failed output attempts. Even then, any rendered material in my sequences would trigger the dreaded dropouts, freeze frames, skips, and substituted rendered material. So after another couple days of attempts, I wound up exporting self-contained movies of every minute of my output, re-editing them back into sequences, and so finally I was able to output to tape in 10-minute chunks, and it only took 5 or 10 tries for each one. The only reason I really needed to go to tape in the first place was because I found impossible to transcode the HDV to SD mpeg for DVD without field artifacts, and abysmally unacceptible quality. So I recaptured the HDV as DV using the deck's downconvert, which seemed to be the only thing it could do well.
I believe that a faster computer with more RAM and a better video card would have made a big difference. Newer versions of FCP have probably solved a lot of the issues I had with the rendered material. Even so, there are aspects of the long-GOP, mpeg-2 stream aspects of HDV and the way that it negatively affects timecode, deck control, and capture and output, that make the format my last choice for professional editing.
For your situation, I'd recommend exporting a self-contained movie, maybe even try AIC, although it'll have to reconform back down to HDV for FW HDV output. Try all your various Mac voodoo steps before starting output - trash prefs, repair permissions, power-cycle everything. You can borrow my feathered headdress and tortoise-shell rattle if you want.
Sorry I couldn't provide a more definitive answer for you...
Max Average

Sony Z1 Print to video HDV problems

I researched several post on this topic and still can't get this to work. Here's my situation. I have imported and edited my HDV footage in the HDV easy set up in FCP 5. I now want to record this HDV sequence (in HDV format) back to a Sony Master tape using my Z1. I am working in a PAL environment and have dbl checked all my settings on the camera and within FCP and I still can't get the video to output. I just get a blue screen on my camera monitor. Can the Sony Z1 even record back to tape in HDV format? When I have the IN/OUT Rec setting set to HDV, REC MODE is greyed out. Only when I have this set to DV or Auto is the REC MODE open to changes. I have my camera set to VCR and the settings are these on the camera:
IN/OUT Rec: VCR HDV/DV is set to HDV (Thats what I want to record in, yes?)
REC MODE: Greyed out
Component is 1080i (Pal)
iLink is set to off
A/V to D/V Out is off
Final Cut Pro settings: (Audio Video Settings)
Summary Tab: Sequence Preset is: HDV-1080i50
Capture Preset is HDV
Device Control: Sony Firewire
AV Device Tab:
Playback Output Video: NONE
Audio: Default
"Different Output for Edit to tape/print to video" Certain settings are greyed out. On this it depends on what my camera is set to in the IN/OUT Rec setting.
Please, any suggestions would be greatly appreciated. Been trying to get this to work for days.
Tim

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

Can Print to Video HDV sequence

Hello, I am trying to export an HDV sequence to a miniDV tape for broadcast. I am using a Sony GV-HD700 tape deck. I am using Print to Video and it just wont work. Any help would be appreciated, thanks!

I am having this same problem, and need help urgently. Does anyone know how to resolve this? I can control the deck through FCP and the FireWire cable, and can even initiate automatic recording from FCP, but once it starts playing the content the deck freezes and does not actually record anything.

Print to Video HDV

Hello All. So about 6 mos ago I successfully printed video back to my XHA1, since then I haven't been able to connect my XHA1 to FCP at all. I have no problem getting the HV20 to mount. I have tried pretty much every possible set-up and still no luck with the A1. I am trying to print to video and can get neither camera to operate correctly. I have searched the boards and nothing seems to work. LIke I said I have tried so many different configurations w/o success. Does anyone have a tried and true way to print HDV 24F footage back to either a Canon A1 or HV20. Your help would be very appreciated. Thank you.
Jeremy

Well I stumbled on the answer to my problem, maybe someone else might learn from my mistake. When creating my storyline, I created the sequence with DV settings. All the resulting work was then in DV and it apparently will not convert to HDV without significant loss. My solution was to Easy Setup with HD and AIC 1080i60 then create the new sequence. I imported all my clips into the new sequence timeline. When I go to print to file now, the camera automatically starts to record with transcoding to HDV appearing while the video is copying back to the Tape. Just a newbie mistake but maybe someone else wont make the same mistake.

Print to video HDV Sony Z1

Hi
I am having a problem printing to video. I have my finished sequence and my camera in VCR mode - I have checked with log and capture for communication and I can control the camera fine. The camera acknowledges HDV/DV in and I don't have any playback selected. In the print to video it is set up for HDV1080 50i as is the camera so off we go, ticking the box for automatic starting - I print to video and it says conforming HDV video for about 18 minutes (5 minute sequence). When it gets to having done this (it seems to go through this twice) and all there is to do is press OK, it plays back full screen on the mac but nothing happens on the deck. A fresh tape is in there and the tab is out - what have I done wrong?
Any suggestions appreciated
Matt

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

Print to video - HDV 1080i60 to Sony HDR-HC1 camera

Like many before, am struggling with print to video of HDV material captured as HDV 1080i60 to a Sony HDR-HC1 camera. Just can't figure out what settings to use, only get the darn blue screen. Have tried several settings, but no success. Does anyone know the trick? Thanks!

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

Print to video / HDV sequence

I am about to export a hdv sequence to my z1.
I have to make a master tape for broadcasting.
I normally export my commercial hdv work to mpeg2 and make a dvd....
To make a master tape for tv broadcast I need to make a dv camtape.
How do I create a dv cam master with the right 16;9 aspect ratio and the leat quality loss?
I understood that I can not use edit to tape. So print to video is my only option....
I thought of first rendering the hdv sequence to an appropriate format.
Which format should I choose. Is pro res an option?
Any expert out there.
Advice hightly appreciated.
thnx
xx
Jane

I think what you should do is put the HDV sequence in a DV sequence, then after rendering just lay it out to tape. You could also send it to compressor for the tranfer, but don't think there's much difference if any, in quality. It should end up letterboxed.
Jerry

Print to video HDV to SD widescreen

I need to print to video (to DVCam tape) my HDV project that was edited frame size 1440X1080 to SD widescreen. When I play out the timeline it is SD letterbox. I am a little confused with this, will it not be 16:9? The HDV thing is somewhat new to me.
After I exported the project to tape, I went to log and capture and it clearly is now SD 720X480 letter boxed. Is it even possible to export 16:9 or anamorphic? Can you tell I am a little lost?
I would appreciate any help with this.
Thanks

Export your sequence to a quicktime file, retaining the HDV sequence settings. Open the resulting quicktime file in compressor, and export using a 16:9 anamorphic SD setting of your choice. Re-import that file into FCP, set up a new sequence to match the 16:9 SD file, and print to DVcam.
Matt

Trouble printing to video HDV

We've changed the MacOS for 6.3 version and the final for 7.0 version. It's an Imac. When now I shoot to tape (sony HVR 1500) an HDV108050i sequence the stream brakes. It seems the flow is not continuous.The image distort, go out, go in, TC jump. ( with DVpal sequence I've no problem). Has somebody any idea of what's it's happening. Before in the same machine we had no problem.
Thanks

It sounds like you don't have a working connection between FCE and your camera. Your cam is recording blank material to tape, that's why you're seeing timecode on the camera's LCD.
Make sure FCE and your camera 'see' each other via their firewire connection. You may need to do View > Video Out > Refresh Video Devices in FCE.
Make sure your camera is set to DV IN (not having this set is a common error), make sure it's in VTR mode and set to Record. You should be able to see your sequence play on the camera's LCD screen whether you are recording to camera or not. Also, you may need to manually begin recording on your camera before you click File > Print to Video > OK in FCE.

HDV Print to Video, My Settings

I've seen several posts here about problems getting Print To Video to work with HDV. I just did this and the results were great. So, at the risk of being redundant, I'm going to post what I did.
Camera: Sony FX1, captured using the camera over Firewire.
Captured into FCP using Easy Setup HDV 1080i60
All the footage was nighttime fast action sports.
In the sequence I slowed almost all the footage down to 33.33%, with Frame Blending turned on.
No dissolves, all simple cuts.
No other filters, motion, overlays, graphics, etc.
Sony FX1 Menu Settings:
IN/OUT REC
VCR HDV/DV > AUTO
REC MODE > SP
COMPONENT > 1080i/48Oi
iLINK CONV > OFF
TV TYPE > 16:9
A/V TO D/V OUT > OFF
Final Cut Pro Settings: (as viewed from MENU>FINAL CUT PRO>AUDIO VIDEO SETTINGS...
Summary Tab
Sequence Preset: HDV - 1080i60
Capture Preset: HDV
Device Control: Sony HDV Firewire
Video Playback: None
Audio Playback: None
Sequence Presets Tab
HDV - 1080i60
Capture Presets Tab
HDV
Device Control Tab
Sony HDV Firewire
A/V Devices Tab
Playback Output
Video: None
Audio: Default
"CHECKED" Different Output for Edit to Tape/Print to Video
Video: HDV (1440 x 1080) 30 fps
"CHECKED" Mirror on Desktop
Audio: Default
"NOT CHECKED" Do not show External A/V ...
"NOT CHECKED" Do no show warning ...
Before you Print To Video, make sure you have the Sequence in the Timeline selected. Otherwise you might get an error message. Also, make sure the Camera has a tape and its sitting at the spot you want to print to. (FCP will control the camera)
Then I choose: MENU>FILE>PRINT TO VIDEO ...
Leader: Nothing checked here
Media: Print In to Out (which was set on the Timeline) nothing else checked
Trailer: "CHECKED" Black 5 seconds
"CHECKED" Automatically Start Recording
After you click OK, your sequence will most likely go through a Conforming process, which conforms the sequence as required for HDV. (different from a render) Then the screen will go black, and you can click OK, FCP will cue up the camera, put it in record mode and start the print. (export)
One note: I thought I had also checked MENU>VIEW>EXTERNAL VIDEO>ALL FRAMES. However, when I was done, I checked this menu again and it was set to OFF. So, to be honest I don't know if I did check it and it went back to off, or it was not in fact checked. (lots of messing around prior to getting it to work, sorry)

wish I could get it to work consistantly for my GR-HD1 from JVC. terrible that one of the first cameras on the market isn't fully supported by FCP5.
I have to fiddle around endlessly to get the camera recognised. Usually in Camera mode and then quickly switch the Cam back to VCR mode after FCP recognizes it.
The people at the Sony Store here in San Francisco are so rude and ignorant that I will die before buying a camera from them. I went in to buy 3 cameras for my company a month ago and couldn't get any service. The only one paying attention to me was the security guard who kept coming over to tell me that I couldn't touch the camera in the display. I asked the sales staff I finally got to help me a question about the HDV cameras, and he just dissappeared. Never to return. Eff them.
I will stick to JVC even if it means changing my shop over to PCs. Which has been happening a lot around me lately. Video production people fed up with Apple refusing to support equipement. PC software is fully compliant to the entire spectrum of video out there. The blessings of being an open format I guess.
But, I love my G5 and would miss it.

Can't capture HDV from Sony z1 on FCP 7

Hi,
I have set 'easy setup' to HDV (I have also tried HDV Fire wire basic) I've followed tutorial on all the set ups to capture. But when I go to capture, FCP can control the play buttons and I can see the time code on screen but there is no picture or sound coming through to capture and is says 'Capture was aborted due to no incoming data from device'.
I have checked everything.
I followed all the suggestions in an older discussion in this forum -
Unable to capture HDV footage with FCP 5.1
This was the last post in that discussion:
"Re: Unable to capture HDV footage with FCP 5.1
May 23, 2010 4:37 PM (in response to MrMajesticMole)
I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now."
I followed all these tips and nothing has changed. This is the first time I am using HDV in FCP. I have used the same Sony z1 camera to shoot and capture DV footage in my current FCP set up and I've had no problems.
The only wierd thing is that under easy set up I selected HDV first with 'all rates' under frame rate. When that didn't work I tried "HDV fire wire basic". Then I tried to put the frame rate in a 50fps. When nothing made any difference I put the frame rate back to all frame rates and while still on Format: HDV selected HDV 1080i50 and also have tried HDV 1080i50 with 'all frame rates' and everythime I go back, it's defaulted to 'HDV 720p50' in the 'use box and frame rate 50fps.
I would really appreciate help with this.

Hi Russ,
Thanks for getting back so quickly.
I was feeling hopeful because I realised I had the fps rate set to 50 and when you said 25fps I thought that must be it. Unfortunatly it hasn't worked at all. It keeps saying there's no data incoming data from device, yet it acknowledges the timecode and I can control the camera from FCP.
I double checked my settings and made sure the camera was on before launching FCP. I am going to study the document you included to see if there is anything else I am doing that isn't working. I am wondering if there are some audio settings mucking it up.
If you have any other thoughts let me know. I will let you know if I figure it out.
Cheers,
Carolyn

HDV mixed format editing and mastering for broadcast TV

Hi
I have HDV blues with regards mixed format and multi time base.
Any help advice will be greatly appreciated.
I have never handled HDV in multiformat and multiple timebase to Mater and output for Broadcast television.
I am hoping to master to DVD directly on the configuration ( details provided below ) to deliver to NTSC and PAL market for DVD retail.
However I would need to take to a post house, one or more quicktime file to Output to Digital Betacam for television broadcast for both NTSC and PAL formats.
with regards
problems I am facing are on two fronts:
1) I am unsure of best quality and workflow to output master on Digital Betacam tape for broadcast TV in NTSC and PAL both formats.
2) With sequence set at HDV 1080 50i, and export setting as current setting, upon render and export of self contained quicktime direct from FCP timeline I face few troubling symptoms;
- that the quicktime exports 3mins to 35 minutes of qt clip but not the whole program of 90 minutes as one clip. System crashes and I have to reboot.
- Another symptom is that by doing above my time line shows aduio as out of sync to video. here i see that Audio tracks A1,A2 as being torn apart at cut edit points and have gap of 1 frame at random ( but not on all edit points ).
A3, A4 and other music and sound fx tracks have slipped off sync by few frames , again at random and also other places the edit comes back in sync with audio.
- Of course I am having to re- render this sequence timeline a zillion times even though the previously rendered files still exist in relevant folder.
Program duration: 90 minutes
current sequence : 1440 x 1080 at 50i
edit sequence time-line consists following source material directly ingested from tape via firewire in native HDV and DV:
VIDEO
-HDV footage of 1440 x 1080, 50i
-HDV footage of 1440 x 1080, 60i
-PAL footage standard and widescreen
-NTSC footage standard and widescreen
- still images
AUDIO
-AUDIO is 16 bits , 48Khz
- Voice Over is 24 bit , 48 Khz
Software: Final Cut Pro version 6
QT: 7.4.1
System configuration:
1) Mackbook pro: OS 10.4.11
graphics/ display card: GeForce 8600M GT
Hardware Overview:
Model Name: MacBook Pro
monitor: one apple cinema display 23 inch
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
2) Mac pro: dual core, 2.3 ghz, 3GB RAM
two apple cinema display 23 inch
All project media residing in 1TB Lacie 800 firewire external disk.

Hi guys, thanks for getting back to me. My client has now changed her mind and so I'm just mixing XDCAM and HDV 16:9 footage which is absolutely fine. Awesome. Thanks for your help!
I have one issue - some of the XDCAM footage she has given me is .MP4 video (actually each clip is a folder with 5 files in it (.MP4, .SMI, .PPN, .XML, .BIM). Do I have to convert the .MP4 into .MOV via Compressor to work with it (presumably this will compress it somewhat) or can I convert it simply and losslessly somehow (perhaps using sony XDCAM software?)
Thanks again for any help!
Oliver

Frequency of video HDV 720p50

Similar Messages

Maybe you are looking for