Frequent Bluetooth Disconnects and Reconnects

I have been following this topic for many months under many thread topics.  Whether the iPhone 3GS (and I presume the iPhone 4) is connected via Bluetooth to a headset, handsfree, or some automobile systems, it may experience frequent and intermittent disconnecting and reconnecting. (Those devices giving voice prompts every time it disconnects and reconnects can be annoying )  Many replies have confirmed similar experiences and some have recommended various fixes ranging from resetting various network functions, to re-pairing the phone to the audio system, to keeping the charger to the phone plugged in, etc.  I have discovered that if an active connection is made, e.g. phone call connection, music streaming, or gps navigation connection, the bluetooth connection remains solid and stable throughout the connection.  A downside of course is one does not want to have to have music streaming or the gps app runniing in the background on the phone all the time either.  I think a temporary fix would be a simple non obtrusive app for the phone that runs in the background that does nothing but keep the connection active would work to resolve this issue for all.  Hopefully it would not use much battery either.  P.S. I have experienced this issue with two Motorola H-17 headsets and one JabraCruiser2 Hands free units, and two separate iPhone 3GS devices.

A follow up.  The Apple Genius Bar yesterday witnessed my above symptoms, reset the network connections which did not cure the problem, finally diagnosed the phone bluetooth transmitting device was not functioning properly.  Of course my phone was out of warranty by now, so I upgraded to an iPhone 4 and now all is well. Posting this for information. 

Similar Messages

  • Bluetooth disconnects and reconnects constantly

    Hello,
    My wife and I both have iPhones. She recently changed her car and the new one has the bluetooth option. She paired her phone with the car and it works normally. However, every few minutes, the car will display "iPhone has disconnected", followed by "iPhone connected" a few seconds later. I tried pairing my phone instead and it works perfectly fine. Never gets disconnected, so the problem is NOT the car's bluetooth. She never used bluetooth before.
    She has an iPhone 4 and mine is a 4S. We got hers shortly after it came out, so it's been more than a year. I supposed it's not under warranty anymore.
    I tried resetting the phone to factory settings but restored it from a backup. Didn't help.
    Can you suggest anything else I can try to have this issue solved?
    Thanks in advance!

    That does sound like something different than the power saving mode. With my Motorola, it will beep when it goes into the power saving mode, however it doesn't power back up again until I get a phone call or there is some other input from the phone.
    If you were looking at your iPhone and at the top where the bluetooth icon is, do you see it change to off when you hear this beep and then come on again when you hear the other one?
    I would check your phone out and see if there could be some issue with your bluetooth. Have you tried a reset and/or restore on your phone? See if that makes any difference, otherwise I would have the phone checked by Apple.

  • IPod sync failed. Disconnect and reconnect, then try again.

    Over the past month or two, I have gotten this message quite frequently with my iPod. It usually happens after I sync my iPod once, leave it hooked up to my iMac for charging, and then try to sync again (sometimes not even more than a few minutes later). I also often have trouble getting my computer to recognize the iPod (or getting my iPod to recognize that it's supposed to start syncing) without having to disconnect and reconnect it and shake the USB cord around a few times.
    I had a little bit of this problem with my iPod 5G and XP PC, though no "iPod sync failed" messages ever. This is a new iPod classic and an iMac. What's going on?
    Does anyone else have this happen to them?

    I'd been having this same issue and kept trying all the suggestions on the forums to no avail. Then I just disabled "Enable Disk Use", which required me to first disable "Manually manage music & videos". I unchecked all of my music, videos, podcasts and photos, applied the settings, then chose which media I wanted in my iPod. I synced successfully and even cleared it out completely a couple of times to re-sync. No issues anymore.

  • Android phone constantly disconnects and reconnects to vpn

    When using verizon 4G the android anyconnect constantly disconnects and reconnects. When it is connected for about 10 seconds it is working normally. This does not happen on the phone when the user is connected to wifi. It is only on 4G. 
    5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
    6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
    5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
    6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
    6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
    6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
    6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
    6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
    6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
    6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
    6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
    5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:41:48|725007|70.199.141.46|8787|||SSL session with client outside:70.199.141.46/8787 terminated.
    5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:41:48|725007|70.199.141.46|8799|||SSL session with client outside:70.199.141.46/8799 terminated.
    6|Oct 30 2014|10:41:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:41:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:41:21|725002|70.199.141.46|8787|||Device completed SSL handshake with client outside:70.199.141.46/8787
    6|Oct 30 2014|10:41:21|725003|70.199.141.46|8787|||SSL client outside:70.199.141.46/8787 request to resume previous session.
    6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
    6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
    4|Oct 30 2014|10:41:20|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:41:20|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:41:20|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:41:20|725002|70.199.141.46|8799|||Device completed SSL handshake with client outside:70.199.141.46/8799
    6|Oct 30 2014|10:41:19|725001|70.199.141.46|8799|||Starting SSL handshake with client outside:70.199.141.46/8799 for TLS session.
    6|Oct 30 2014|10:31:19|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:31:19|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:31:19|725002|70.199.141.46|8529|||Device completed SSL handshake with client outside:70.199.141.46/8529
    6|Oct 30 2014|10:31:19|725003|70.199.141.46|8529|||SSL client outside:70.199.141.46/8529 request to resume previous session.
    6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
    6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
    4|Oct 30 2014|10:31:18|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:31:18|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:31:18|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:31:18|725002|70.199.141.46|8540|||Device completed SSL handshake with client outside:70.199.141.46/8540
    6|Oct 30 2014|10:31:18|725001|70.199.141.46|8540|||Starting SSL handshake with client outside:70.199.141.46/8540 for TLS session.

    I experienced the same problem with my Lumia 800 and the MyWay audio/navi/BT telephone system in my previous and current Citroën C5 (both latest model (PhIII)): http://discussions.nokia.com/t5/Nokia-with-Windows-Phone/Bluetooth-and-3G/td-p/1288591 .
    I first thought it had something to do with switching from G to 3G and back. But in the end I discovered that BT on the Lumia 800 just disabled itself, while connected to my cars BT system. I have started the procedure to send my Lumia tot Nokia Care. Keep You informed.

  • Several times a day my HP Laptop disconnects and reconnects to my WRT600N router.

    I’ve installed a new WRT600N.  (Firmware Version: 1.01.35 build 5_20080115).
    My install was a “Linksys EasyLink Advisor” guided and is generic.  SPI Firewall Protection is enabled.  Security Mode is enabled for WPA-Personal.
    The laptop I use with router is an HP/Compaq 6710b (also new), running XP Pro.  The built-in WiFi adapter is a “G” type (Intel PRO/Wireless 394ABG) with “Windows Wireless Network Connection” enabled.
    Presently I don’t use the “N” capability of the router.  However, I plan buy a 2nd laptop with an “N” WiFi adapter soon.
    The router works well…most of the time. Signal strength is “Very Good”.  However, several times a day my HP Laptop disconnects and reconnects to the router.
    Each time this happens I get a “Linksys EasyLink Advisor” prompt stating “Network Problem!...the connection to the router is not working”.
    After experimentation I realize that most often the connection will restore by itself…or worst case; I can re-detect and restore the connection using either the “Linksys EasyLink Advisor”  wizard OR the “Windows Wireless Network Connection” wizard.
    Besides losing the connection, the most annoying part of this is that after the connection is restored and the “Linksys EasyLink Advisor” wizard message remain indicating: “Network Problem!...the connection to the router is not working”.  
    Suggestions?

    There are many causes for poor wireless connections, and many solutions:
    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Some users have reported improved wireless performance by switching from WEP to WPA encryption.
    If you continue to have problems, try the following:
    For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
    If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
    Hope this helps.

  • Wireless keyboard keeps disconnecting and reconnecting

    My Wireless Keyboard keeps disconnecting and reconnecting and typing by it self!! any ideas?

    Hi,
    Yes believe it or not my problem was caused by the keyboard being too close to the iMac display, the bluetooth was infering with the other radio signals coming from the antenna, it needs to be at least 1ft away from the display (30cm) to prevent this (this won't help those of you with small computer tables/desks)
    Hope this works for you....
    iDave

  • When leave I nano 4th gen connected to either of my cars it no longer restarts playing when car is restarted. Instead it shows 'no entry' in the song title on the car audio display and won't play until disconnected and reconnected.

    Nano has worked fine for a couple of years being left connected to either one of our cars. However, every time car is restarted it won't play without being disconnected and reconnected. I have done a full restore.
    Current cars are Range Rover Sport 2011 and Jaguar XK 2011.
    Has anyone else experienced this issue?
    Thanks,

    I had a similar problem. Try resetting and erasing the phone and restoring from a known good backup.

  • TS3474 iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

  • In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

    In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
    I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

    I have same error except that i get it even when my phone is not connected.

  • Podcasts no longer appear under ipod device in I tunes library.  I can access podcasts on my ipod but I CANNOT access podcasts on I tunes library.  I have disconnected and reconnected.  I have restored my ipod.  I have checked for updates. What else?

    'Podcasts' under Ipod device disappeared in Itunes library.  I can't manage my podcasts on ipod via I tunes library.  I can access the podcasts on my ipod (5th generation), itself. I can access and manage music.   I can add more podcasts to ipod.  The podcast icon reappears with only the newly added podcasts.   When I disconnect ipod and reconnect ipod, 'podcasts' no longer appears under the device.  So I am unable to manage my podcasts on I tunes library which means I can't delete podcasts from I tunes library.  I can only add podcasts. I have disconnected and reconnected ipod.  I have checked for updates.  I have restored the ipod to it's original settings.  My next step will be to install and reinstall I tunes.  Any other suggestions would be appreciated.

    To be clear, the podcast icon disappeared under Ipod device in Itunes.  I can access and manage the podcasts in the itunes library.  I can't manage podcasts on my ipod via itunes (which means I can't delete podcasts from my ipod). I can access podcasts on my ipod, itself.

  • How can I troubleshoot this problem with the iMac keyboard? My keyboard disconnects and reconnects within seconds but all the typing is lost while it was offline.  This is usually 5 seconds or less but happens 2 or 3 times in a minute.  Annoying!

    My wireless keyboard disconnects and reconnects within seconds but all text that was typed during the time offline is missing.  i have to go back and retype missing parts.  What can I do to troubleshoot this.  The computer is only about six month old.  This problem is new in the last couple weeks.  Thanks for suggestions.

    Beat me to it, Donald.     But there is a possible alternative.  If the batteries have been replaced since new, were they replaced with the same batteries or another make.    There are examples around which do not fit perfectly and leave a certain amount of movement inside the battery housing.  That could lead to instability such as the OP describes.

  • Time Capsule disk disconnect and reconnect every 5 minutes

    This problem began with Airport Firmware 7.6, and has continued to perist with every subsequent firmware version.  Reverting to firmware version 7.5.2 eliminates the problem.  Running with the latest firmware version 7.6.3, on OS X 10.8.2, the Time Capsule disk is disconnected and reconnected every 5 minutes, and this is seen in the console log:
    15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
    15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 type 'afpfs', mounted on '/Volumes/Vilya', from '//Mike%20Connally@TimeCapsule._afpovertcp._tcp.local/Vilya', not responding
    15/02/2013 16:10:22.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 190 on so 0xffffff804456ede0
    15/02/2013 16:10:22.000 kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Vilya prevTrigger 190 currTrigger 191
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  doing reconnect on /Volumes/Vilya
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  posting to KEA EINPROGRESS for /Volumes/Vilya
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Vilya
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  connect to the server /Volumes/Vilya
    15/02/2013 16:10:22.345 KernelEventAgent[43]: tid 00000000 found 1 filesystem(s) with problem(s)
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  Logging in with uam 13 /Volumes/Vilya
    15/02/2013 16:10:22.651 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  Restoring session /Volumes/Vilya
    15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  get the reconnect token
    Has anyone found a solution to this, other than reverting to Airport Firmware 7.5.2?

    Welcome to the club.. there is a very long thread.. here.
    https://discussions.apple.com/thread/3526741?tstart=0
    There seems to be any number of factors.. where the solutions are little silly things..
    Start from the end of the thread and work backwards as this has been ongoing for a long time.. and experience has improved.
    What you are seeing btw is the change apple made in Lion and 7.6 to higher security version of AFP.. but it is a mess IMHO.. and has not worked at all well.

  • If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
    2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
    Here are the links:
    http://store.apple.com/us/product/MD098ZM/A
    http://store.apple.com/us/product/MC552ZM/B

  • Have an iMac 2008/09 on starting today I have a white screen, an apple icon and a constant rotating sun, nothing else. I've tried turning off and disconnecting and reconnecting the power lead with the same results. Any thoughts? Many thanks Matt

    Have a 2008/9 iMac on starting up today I have only a white screen, apple icon and a continuous  revolving sun. Have tried turning off and on and disconnecting and reconnecting the power with no affect - any thoughts or advice please. Thanks Matt

    If your iMac came w/system DVDs, do the following:
    Disconnect all devices from the computer then do the following:
    Boot up from your DVD that originally came w/the iMac while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

  • HT204291 I must continually disconnect and reconnect my airport express to get it to  play my iTunes library on my TV. Why?

    Why must I continually disconnect and reconnect my airport express in order to get it to play my ITunes library on my TV?

    I have a HP Pavillion dv6000 running Windows Vista.  Itunes is up to date.  I have power cycled the router several times   it is a Surfboard sbg6580.  still no luck with seeing the airplay symbol on itunes, but Isee it on my phone and can stream music via the airport with my phone.  I can see both airports on the airport utility on my laptop.  I'm stumped...

Maybe you are looking for

  • No more table-backgorunds?!

    hi... im missing the option for [table]s to include images for the background via editor! im using DW for easy and fast work.....putting css "per pedes" together i would use a simple text-editor! where are all these (old) options hidden? are there mo

  • Non-enlish fonts in Forms for Linux

    Hi! Can anybody help me with a problem: I cannot insert russian font into a form. It looks on web like '?????' I've developed form under Windows and then compiled it under Linux because I have iAS for Linux

  • Getting error: Report Application Server failed

    I started posting my problem in thread below and have been advised to continue in this forum Reference thread: The Report Application Server failed My problem occurs in a asp application (vb 2005) and also when I run the Crystal Report stand alone (x

  • Installing Sun Java System Application Server

    kjozsa@walrus:/usr/local/java$ ./sjsas-9_1_02-linux.bin Checking available disk space... Checking Java(TM) 2 Runtime Environment... Extracting Java(TM) 2 Runtime Environment files... Deleting temporary files... ^C^C ^CKilled At the deleting temporary

  • Importing a 3d object problem

    Hi , when i import a 3d layered psd file in AE ,it import it as a 2d layer, i`ve read the forum , and i make everything what i`ve seen.I`m using photoshop and AE CS4 my video card is Ati Radeon HD 2400 with the latest drivers installed , and in AE in