Frequent dumps with the message "LOAD_PROGRAM_LOST"

Hi,
I get frequent dumps in an SRM development server SRM.
u201CLOAD_PROGRAM_LOSTu201D is the dump.
The error analysis says this
While the program was running, the program "CL_O24AZ2T4VNGKGGI9LRCNKSPN8DNCP" had to be reloaded because a bottleneck pushed it out of the local program buffer. However, the database was found to contain an already changed program.
I thought it to be problem with program buffer.When I checked the parameters,the current value of the parameter u201Cabap/buffersizeu201D is 500MB and the available free space is 1MB.
If I increase the value, would my problem be resolved?Or would there be any other dependent parameters that I should take care.Please help.
Thanks in advance.
Regards,
Sudheer.

Hi,
if you are using ORACLE, try to consuder increasing sga_max_size and db_cache_size
to set this parameter you must consider your physical memory is available.
i have experienced in the top three largest consumer goods mfg and distributor, which have huge database size and high database growth, with large number of user, currently running 400 MB in abap_buffer_size but seems running well.
hope it help you
rgds,
Alfonsus Guritno

Similar Messages

OVS - getting dump with the message Subnode/attribute INPUT already exists

Hi All,
I am using OVS for the field Shopping cart number.whenever i click on F4 help, icon i am getting the dump with the following message 'Subnode or attribute INPUT already exists ' .. Any idea / clue regarding this dump.please advise me.
Thanks & Regards,
Lakshmi.

Also check this link:-
Regarding select options
It also talks about the same problem.

HT1551 I am usually fine with my apple tv. However, quite frequently I get the message that apple tv cannot access apple store. i go to my Ipad or Mac computer and I am able to acess apple store easily. Does anyone have an idea on what is wrong?

I am usually fine with my apple tv. However, quite frequently I get the message that apple tv cannot access apple store. i go to my Ipad or Mac computer and I am able to acess apple store easily. Does anyone have an idea on what is wrong?

Have you tried connecting it with an ethernet cord? It could be a wifi issue.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN

My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it.

My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?

I am getting the same error message. Have you figured it out?

I cannot open itunes. I updated the software yesterday but it stopped working half way though use and now every time i try openeing it it comes up with the message 'allow programme to make changes to your computer?' and on clicking yes doesnt do anything.

On using my latop yesterday, i opened itunes and it gave me the option to update to the new software, which i was happy to do. I went through all the stages on installing the software and it opened up for use.
On using the software to download new music, i found it was freezing quite a lot and just in general wouldnt work. I closed the prgramme after having to use task manager as it wouln't respond. I then re-opened the programme and it came up with the message 'Do you wish to allow this prgramme to make changes to your computer?' i automatically said yes and expected itunes to open however, it didn't. I ran through troubleshoot compatibility however the issue found said 'Incompatibe application' to which i didnt know what it meant.
I've tried everything to make it work. Re-starting the computer, going on unistalling the programme and repairing it but, nothings worked.
I dont want to unistall the programme because i dont want to lose my music. I need a way to fix the programme without unistalling it.
Can anyone help??

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

TS3992 my ipad mini is stuck with the message on the screen 'this ipad hasn't been backed up in 5 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi' with OK button. If you click button nothing happens and I can't move an

Ipad mini is stuck with the message 'this ipad hasn't been backed up in 5 weeks....' if you click the OK button nothing happens, cannot get rid of the message and cannot even power off b/c the message is on the screen.
The ipad had not been backed up b/c it kept saying not enough storage available

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Frequent dumps with the message "LOAD_PROGRAM_LOST"

Similar Messages

Maybe you are looking for