Frequent issues with supplied SSD in 17" 2011 MBP

Hi all,
Perhaps someone can help?
I've recently (in the last couple of months) been having problems with the SSD in my early-2011 17" MBP. The model of the SSD (from System Profiler) is APPLE SSD TS256C.
The problems eems to occur after emptying the Trash when it has files of large sizes in it (video files of 1 or more GB typically). I empty the Trash, and the available space showing for the drive gets bigger,a s expected, but then when I try to make use of the drive (for example by copying files from another drive to it) I am told there isn't enough free space (when there clearly ought to be).
Example from earlier today:
I had 60GB available.
I put around 30 GB of stuff in the Trash and emptied it.
Available space now shows 90GB free.
I try to copy 75GB from an external drive onto the SSD, but am told there isn't enough free space.
In a attempt to fix the problem, I did what I have done on the 3 previous occassions: Restart the computer, hold down Cmd+R and run Disk Utility from there. Here I can repair the SSD (as it has the OS on).
This is what Disk Utility showed me:
Verifying volume “Hard Drive”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file Hospital Records - 100k YouTube Subscribers.mov
(It should be 11029 instead of 144729)
Incorrect block count for file Netsky Live - Backstage at the Electric Brixton.mov
(It should be 12062 instead of 606074)
Incorrect block count for file Netsky Live - Lotto Arena 2013 Promo.mov
(It should be 7177 instead of 135443)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
Invalid volume free block count
(It should be 11712443 instead of 10811938)
The volume Hard Drive was found corrupt and needs to be repaired.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran it a couple of times (as on previous occasions) until no errors were reported.
On previous occassions, upon restarting, things went back to normal, but this time I am still being told there is not enough free space, though Get Info shows 121GB available.
So I have some questions:
What is going on?
Why does this keep happening?
What can I do to solve my current issue?
What can I do to stop this from happeneing again?
Many thanks in advance...

I'd totally forgotten about this until I got a notification that you had replied.
I no longer have this problem.vaguely remember calling up Crucial (who make my second SSD) and they said something about leaving the machine on, but not doing anything on it for 24 hours or something. So it has to stay switched on, not go to sleep (dim your screen though) and don't touch your keyboard or mouse for a full 24 hours... maybe it was a bit longer... maybe it had to be at the login screen (can't remember)... and in this time it will run some automatic repair thing.
It was so long ago I really can't remember the spcifics - but have a hunt around for things to that effect. Or call Apple/Crucial and mention what I've just said, see if it makes any sense to them and get them to advise the exact corect procedure.

Similar Messages

  • Issue with Supplier Open Interface Import Program

    Hello Folks,
    I need help with supplier conversion. I am trying to load suppliers through the supplier open interface program. I see that the record got rejected in AP_SUPPLIERS_INT table with status as REJECTED. However i do not see the record in AP_SUPPLIER_INT_REJECTIONS. Therefore, i am not able to understand the rejection reason. I enabled debug can seeing this log..
    assign_party_usage (+)
    do_assign_party_usage (+)
    effective_start_date = 2011/05/12 effective_end_date = 4712/12/31
    duplicates_exist (+)
    No date tracking for this usage SUPPLIER. Check duplicate assignment.
    l_has_duplicates = Y
    duplicates_exist (-)
    assign_party_usage (-)
    Rejected Vendor_Interface_Id: 15004, No. of Messages from Create_Vendor API: 2, Message From Create_Vendor API:
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    MSG-00999: Custom Report
    MSG-00001: After SRWINIT
    MSG-00002: After Get_Company_Name
    MSG-00003: After Get_NLS_Strings
    MSG-00004: After Importing Suppliers
    MSG-00005: After Get_Header_Information
    MSG-00020: After SRWEXIT
    As per my understanding from the log, there is some problem with party_usage_assignment. I would really appreciate is someone can help me debug the exact problem. Else i would have to open a SR for this
    Thanks so much looking forward for your answers.

    Pl post details of OS, database and EBS versions.
    Pl see if MOS Doc 1060824.1 (R12: Supplier Open Interface APXSUIMP Errors with REP-0004 Output Does Not Indicate Reason for Rejection) is applicable
    HTH
    Srini

  • ISSUE WITH SUPPLIER SITE OPEN INTERFACE IMPORT PROGRAM in R12

    I am facing issue while submitting supplier site open interface import program programmatically using fnd_request.
    I am uploading the interface tables with the mandatory data and running the standard Request Set for Suppliers.The program is creating the Suppliers but is unable to create the Supplier Sites.It is getting completed with no rejections as well as imported records.
    It is updating the Supplier Sites Interface table (ap_supplier_sites_int ) with status as rejected with no rejected records in ap_supplier_int_rejections table.
    I am using the following code.
    Step 1 - call set_request_set
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling set_request_set...');
    success := fnd_submit.set_request_set ('SQLAP', 'FNDRSSUB852');--'FNDRSSUB1703');
    IF (NOT success)
    THEN
    RAISE srs_failed;
    ELSE
    apps.fnd_file.put_line (apps.fnd_file.LOG,
    'Calling submit program first time...'
    END IF;
    -- Step 2 - call submit program for each program in the set
    success :=
    fnd_submit.submit_program ('SQLAP',
    'APXSUIMP',
    'STAGE10',
    'ALL',
    1000,
    'N',
    'N',
    'N',
    CHR (0)
    IF (NOT success)
    THEN
    RAISE submitprog_failed;
    END IF;
    apps.fnd_file.put_line (apps.fnd_file.LOG,
    'Calling submit program second time...'
    success :=
    fnd_submit.submit_program ('SQLAP',
    'APXSSIMP',
    'STAGE20',
    'ALL',
    1000,
    'N',
    'N',
    'N',
    CHR (0)
    IF (NOT success)
    THEN
    RAISE submitprog_failed;
    END IF;
    -- Step 3 - call submit_set
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling submit_set...');
    req_id := fnd_submit.submit_set (NULL, TRUE);
    IF (req_id = 0)
    THEN
    RAISE submitset_failed;
    END IF;
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Finished.');
    And in the interface table the record status is rejected and ther is no corresponding record in ap_supplier_int_rejections.
    but the supplier is getting created succesfully.
    ### Steps to Reproduce ###
    INSERT INTO ap_suppliers_int
    (exclusive_payment_flag,
    vendor_interface_id,
    vendor_name,
    segment1,
    vendor_type_lookup_code,-- set_of_books_id,
    status
    VALUES ('N', --'N',
    ap_suppliers_int_s.NEXTVAL,
    'TEST_REC4',
    4428813,
    'VENDOR', --2041,
    --rec_spl_site_bank_hdr.set_of_books_id,
    'NEW'
    INSERT INTO ap_supplier_sites_int
    (vendor_site_interface_id,
    vendor_interface_id,
    vendor_site_code,
    address_line1,
    city,
    state,
    zip,
    country,
    operating_unit_name,
    status --exclusive_payment_flag
    VALUES (ap_supplier_sites_int_s.NEXTVAL,
    -- VENDOR_SITES_INTERFACE_ID
    ap_suppliers_int_s.CURRVAL,
    -- VENDOR_INTERFACE_ID
    'REC_VDR_SITE4',
    -- VENDOR_SITE_CODE
    'REC_ADDR4',
    -- ADDRESS_LINE1,
    'REC_CITY4', --CITY
    'REC_STATE4', --STATE
    3442121,
    'US', -- COUNTRY,
    ' Test US Operating Unit',
    'NEW'
    );

    Hi
    I have the same issue with ap supplier sites interface program .. Did your problem got solved..I will be thankfull for any help
    Thanks

  • Frequent issues with the contacts

    Hi,
    Everyday I face issues with the contacts. It does not search the contact I wanted to look and stuck on the first page of the list for few seconds and then move to the searched contact. But when I open that contact,  it shows the contact details of first name of my conact list, not the one I searched. It is irritating and happens everyday.
    Only way to resolve this is by restarting the device or power off and ON it. 
    Does anyone face this. Is there any solution availble for this issue. 

    I am a real estate broker and I have 1200 contacts and when I transferred the contacts from my old BB Torch to z10, the transfer was successful and all my contact fax numbers are listed as fax. BB has announced that they are going to have USB Outlook sync in the future release of BB link. I am eagerly waiting just like you, it is important part of my business and online cloud sync is not an option for me. I currently email my contacts from my desktop to my z10 as a .vcard and update any new contacts.. Same with the calendar. You can also save it on your sd card. A temp solution until the feature is available. or use outlook.com or other cloud service. 
    To add a fax to your contact, open the contact in edit mode, click on add field and select fax.. You also have a choice to set fax work, home , direct or other.

  • Why wont the SSD from my 2011 MBP work right away in my 2012 MBP?

    I have a 2011 MBP running a Samsung SSD 470 without a problem.
    I swapped the SSD into my new 2012 MBP which is, apart from the yearly updates (2.3 i5 to 2.5 i5 processor and RAM speed increase from 1333 to 1600) exactly the same computer. I expected to literally carry on using it from where I left off in the 2011 model but the 2012 machine will not boot with this drive in it.
    Why?

    actually i own a late 2011 Macbook Pro and I bought my niece a new 2012 Macbook Pro....
    gave her one of my old Kingston V200 128GB SSD to give her speed....
    It booted but kept on crashing and the startup is very slow...So i did an internet recovery install....And now it's working great...
    came to a conclusion ( i may be wrong ) - because my 2011 is a Sandy Bridge Processor/Chipset combo and the 2012 is the new Ivy Bridge Processor/Chipset combo was the issue...After a clean install, everything was fine...
    I understand you're hesitant about doing a clean install because you don't have it backed up....
    Try booting with the original drive to see if your sata cable is fine just to eliminate your sata cable as defective...

  • Issue with opening and closing 13 inch MBP

    I recently received a 13 inch 8gb memory Macbook pro for educational purposes. Although I believe it is overall a great product, I have noticed an issue pertaining to opening and closing the device. Occasionally when I attempt to open the device, I notice that the black mechanism which attaches the display and keyboard together fails, or locks up in an unusual manner which prevents me from opening the device fully. This causes me to have to close the device, and open it once more. Although it doesn't appear to be a huge issue, I was wondering if this should be something of concern, or something that is common and is nothing to be worried about.

    Although this isn't something that I've personally seen before, I probably wouldn't be too concerned if it doesn't look like anything is actually broken - assuming that it didn't cause issues with using the device, that is.
    What might be a good idea, though, is if you have a few minutes and have an ARS nearby, is to make a Genius Bar appointment and let Apple take a quick look at it. It looks like some piece of mind is all you want, and given the scenario, having someone physically able to see/feel the issue is probably your best bet. The appointments are 15 minutes, and free of charge. You can make an appointment here.
    Regards,
    Gnomish8

  • Eclipse SLI issue with OCZ SSD

    I have been trying to install windows 7 on my SSD: OCZ agility 60 gig sataII , and fails every time.
    I have confirmed it not the install disk / memory / switching sata cable's
    Other strange issue is every time I attempt to install windows 7 on the ssd it error's up 0X80070002 i did go to m$ web site and search the error and ran the FIX IT tool, and attempt again with fail same error code... Another strange issue every time I attempt to install w7 after it error's out and i reboot the motherboard doesn't see the ssd any more and the only was to see it is run a repair on windows 7 and it will see the install but not the hdd to install it on.. (After I disconnect the sata cable and reconnect it, then it see's it again)
    Any Idea;s my last resort is attempting a "Windows 7 – VHD Boot" on it.

    Quote from: HU16E on 22-December-10, 07:54:06
    Added: Just curious. Is this a SATA III 6Gb/s drive? Do you have it jumpered for 3GB/s operation? Or is it a SATA II 3Gb/s WD connected to SATA port 6?
    "WD Caviar Black 1TB SATA HD 7200/64MB/SATA-6G "bought from tigerdirect iteam number no longer brings up any info(as usual)
    Quote from: HU16E on 23-December-10, 06:37:13
    Is it possible to try the SSD on another system? To completely rule out the SSD itself as being in some way faulty?
    If some one wants to supply It, I be gladly to attempt another go at it..If not every one gate to wait for OCZ to rma the sdd and send me a different one.

  • Macbook Pro video issue with multiple Monitors and Powerpoint 2011

    Hello all,
    I have a major issue that is perplexing me. Whenever I hook up a second monitor or projector to my Macbook Pro 15" Early 2010 and launch a Powerpoint slideshow I lose video on both systems immediately and can only recover with a reboot. This is fully reproducable. It doesn't matter if I'm using the mini Display Port to DVI or VGA adapter, same results. Same results with monitors, TVs, or external projectors. I only experience this issue in MS Powerpoint 2011, no other applications. I have 8GB of Ram and a 2.66GHZ i7. It doesn't matter what my resolution is set to, same issue. I will post two error reports below for additional details.
    Thank you for the help,
    Eric
    Interval Since Last Panic Report: 1489459 sec
    Panics Since Last Report: 5
    Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
    Thu Mar 3 18:08:35 2011
    panic(cpu 0 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5ea3000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x83701768 : 0x21b50c (0x5d4438 0x8370179c 0x223974 0x0)
    0x837017b8 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
    0x83701858 : 0xaee640 (0xe9c5c04 0xd551004 0x100 0xae881b)
    0x837018a8 : 0xae5639 (0xd551004 0x100 0x837018d8 0x9c36d7)
    0x837018d8 : 0x17169ce (0xd551004 0x100 0x438004ee 0x3)
    0x83701a18 : 0xb0d2bd (0xd551004 0xd681004 0x0 0x0)
    0x83701a58 : 0x9dce63 (0xd551004 0xd681004 0x0 0x0)
    0x83701af8 : 0x9d946f (0x0 0x9 0x0 0x0)
    0x83701ca8 : 0x9da2b7 (0x0 0x600d600d 0x7057 0x83701ce8)
    0x83701d98 : 0xc94d1c (0xc1d00044 0xbeef0003 0xcaf0133e 0xcaf01340)
    0x83701eb8 : 0xc94fba (0xee95804 0x18547e04 0x6d1c6460 0x8)
    0x83701f18 : 0xc952a5 (0xee95804 0x18547e04 0x6d1c6460 0x83702180)
    0x83701fc8 : 0xca94a9 (0xee95804 0x1844a8e8 0x8370233c 0x83702180)
    0x83702238 : 0xc8ac0b (0x6d29e000 0x1844a8e8 0x8370233c 0x83702324)
    0x83702398 : 0xc8ae49 (0x6d1de000 0x1844a800 0x1 0x0)
    0x837023c8 : 0xc8d90a (0x6d1de000 0x1844a800 0x1 0x9e9de118)
    0x83702408 : 0xcafb4e (0x6d1de000 0x1844a800 0x6d3f2274 0x140)
    0x83702498 : 0xca13c1 (0x1855ec80 0x1844a800 0x0 0x1)
    0x837024f8 : 0xca1628 (0x6d3f2000 0x6d3f277c 0x1844a800 0x0)
    0x83702548 : 0xca1afc (0x6d3f2000 0x6d3f277c 0x8370286c 0x8370280c)
    0x83702888 : 0xc9e945 (0x6d3f2000 0x6d3f277c 0x1 0x220673)
    0x837028a8 : 0xc665a1 (0x6d3f2000 0x6d3f277c 0x18724240 0x500547)
    0x837028d8 : 0xca0408 (0x6d3f2000 0x83702a1c 0x83702908 0x4ffa01)
    0x83702918 : 0xc6a8de (0x6d3f2000 0x83702a1c 0x83702a1c 0x83702980)
    0x83702a58 : 0xca3cfe (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
    0x83702b08 : 0xc66c93 (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
    0x83702b88 : 0x565a88 (0x6d3f2000 0x0 0x83702ddc 0x83702c14)
    0x83702bd8 : 0x566327 (0xcf4e20 0x6d3f2000 0x1cac2d88 0x1)
    0x83702c28 : 0x566bdb (0x6d3f2000 0x10 0x83702c70 0x0)
    0x83702d48 : 0x285bce (0x6d3f2000 0x10 0x1cac2d88 0x1)
    0x83703df8 : 0x21d8ba (0x1cac2d60 0x114625a0 0xfc330 0x8a03)
    0x83703e38 : 0x210a3a (0x1cac2d00 0x0 0x1cab2ce0 0x10599fc0)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    com.apple.nvidia.nv50hal(6.2.6)@0x15e0000->0x19f4fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    BSD process name corresponding to current thread: Microsoft PowerP
    Mac OS version:
    10J567
    Kernel version:
    Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 6097571436804
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x147f000, size 0x65536) - last unloaded 133585664378
    loaded kexts:
    com.aventail.xgfilt.kext 1.0 - last loaded 362791442640
    com.aventail.tun.kext 1.0
    com.google.filesystems.fusefs 2.0.3
    com.McAfee.kext.AppProtection 1.0.0d1
    com.vmware.kext.vmnet 3.1.2
    com.vmware.kext.vmioplug 3.1.2
    com.vmware.kext.vmci 3.1.2
    com.vmware.kext.vmx86 3.1.2
    com.mcafee.kext.Virex 1.0.0d1
    MonitorControl.drv 1.0d3
    com.apple.filesystems.udf 2.1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleBluetoothMultitouch 54
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleGraphicsControl 2.8.68
    com.apple.GeForce 6.2.6
    com.apple.driver.AppleIntelHDGraphics 6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
    com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBCardReader 2.5.8
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.AppleIRController 303.8
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleHIDKeyboard 141
    com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
    com.apple.driver.AppleMultitouchDriver 207.10
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.NVDAResman 6.2.6
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.iokit.IOUSBMassStorageClass 2.6.5
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 465.76 GB
    Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
    USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    #2 Panic
    Interval Since Last Panic Report: 1490834 sec
    Panics Since Last Report: 7
    Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
    Thu Mar 3 18:30:57 2011
    panic(cpu 2 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5e82000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x82f79bd8 : 0x21b50c (0x5d4438 0x82f79c0c 0x223974 0x0)
    0x82f79c28 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
    0x82f79cc8 : 0xaee640 (0xe4e0804 0xe624004 0x100 0x2)
    0x82f79d18 : 0xae5639 (0xe624004 0x100 0x82f79d48 0x9c36d7)
    0x82f79d48 : 0x171a9ce (0xe624004 0x100 0x438004ee 0x29eac3)
    0x82f79e88 : 0xb0d2bd (0xe624004 0xe4db004 0x0 0x0)
    0x82f79ec8 : 0x9dce63 (0xe624004 0xe4db004 0x0 0x0)
    0x82f79f68 : 0x9d946f (0x0 0x9 0x0 0x0)
    0x82f7a118 : 0x9db5fb (0x0 0x600d600d 0x7027 0x82f7a148)
    0x82f7a1e8 : 0xc84975 (0xc1d00041 0xbeef0003 0x18512500 0x71)
    0x82f7a288 : 0xc84e9f (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a2c8 : 0xc5ce0b (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a2f8 : 0xc84572 (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a318 : 0xc5c418 (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a338 : 0xc84e4a (0x6d204000 0x184fc000 0x2 0x2)
    0x82f7a378 : 0xc5f7b9 (0x6d204000 0x184fc000 0x0 0x184fc000)
    0x82f7a3b8 : 0xc5d269 (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
    0x82f7a408 : 0xcafbed (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
    0x82f7a498 : 0xca13c1 (0x1808d400 0x184fc000 0x0 0x1)
    0x82f7a4f8 : 0xca1628 (0x6d3cf000 0x6d3cf77c 0x184fc000 0x0)
    0x82f7a548 : 0xca1afc (0x6d3cf000 0x6d3cf77c 0x82f7a86c 0x82f7a80c)
    0x82f7a888 : 0xc9e945 (0x6d3cf000 0x6d3cf77c 0x1 0x220673)
    0x82f7a8a8 : 0xc665a1 (0x6d3cf000 0x6d3cf77c 0x18513100 0x500547)
    0x82f7a8d8 : 0xca0408 (0x6d3cf000 0x82f7aa1c 0x82f7a908 0x6d3cf000)
    0x82f7a918 : 0xc6a8de (0x6d3cf000 0x82f7aa1c 0x82f7aa1c 0x82f7a980)
    0x82f7aa58 : 0xca3cfe (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
    0x82f7ab08 : 0xc66c93 (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
    0x82f7ab88 : 0x565a88 (0x6d3cf000 0x0 0x82f7addc 0x82f7ac14)
    0x82f7abd8 : 0x566327 (0xcf4e20 0x6d3cf000 0x17ce2188 0x1)
    0x82f7ac28 : 0x566bdb (0x6d3cf000 0x10 0x82f7ac70 0x0)
    0x82f7ad48 : 0x285bce (0x6d3cf000 0x10 0x17ce2188 0x1)
    0x82f7bdf8 : 0x21d8ba (0x17ce2160 0x1720f5a0 0x1fd590 0xa017)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.nvidia.nv50hal(6.2.6)@0x15e4000->0x19f8fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    BSD process name corresponding to current thread: Microsoft PowerP
    Mac OS version:
    10J567
    Kernel version:
    Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 404911465926
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1483000, size 0x65536) - last unloaded 107949333800
    loaded kexts:
    com.google.filesystems.fusefs 2.0.3 - last loaded 376650877354
    com.McAfee.kext.AppProtection 1.0.0d1
    com.vmware.kext.vmnet 3.1.2
    com.vmware.kext.vmioplug 3.1.2
    com.vmware.kext.vmci 3.1.2
    com.vmware.kext.vmx86 3.1.2
    com.mcafee.kext.Virex 1.0.0d1
    MonitorControl.drv 1.0d3
    com.apple.filesystems.udf 2.1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleBluetoothMultitouch 54
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleIntelHDGraphics 6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.GeForce 6.2.6
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleGraphicsControl 2.8.68
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBCardReader 2.5.8
    com.apple.driver.AppleIRController 303.8
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleHIDKeyboard 141
    com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
    com.apple.driver.AppleMultitouchDriver 207.10
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.NVDAResman 6.2.6
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.iokit.IOUSBMassStorageClass 2.6.5
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 465.76 GB
    Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
    USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000

    I "fixed" it, I did a fresh install and restore and that power point issue is gone.  It works now without crashing but I am using Snow Leopard 10.6.4 now instead of 10.6.7.  I'm going to update and see what happens.

  • Has anyone had recent issues with iCloud mail and Outlook 2011?

    Two days ago without warning when sending an e-mail from Outlook 2011 from a MacBook Pro running 10.8. (Have a .mac account), I had an error pop up, see below.
    Tried entering the password but the same error popped up. Thought there might be an error with the keychain so verified and ran a repair. Still the error continued. I checked that the password was still working and logged into iCloud. I then launched Mac Mail and this worked fine and so also my iPhone / iPad etc. Nothing I did made it possible to send e-maills from my .mac account although I could receive them.
    For the last couple of days I have been using my MacBook AIr for sending mails for the same account via Outlook 2011. This has been working fine all day until 25 mins ago when the same error message popped up on this Mac too. Went through the same set of tests and again Mac Mail works and so does the password.
    Have tried to Google for a solution but can't find anything relevant. Could this be Microsoft trying to cause problems for Apple users, some rogue update, iCloud security certificate issue, or something more sinister. Any suggestions for a fix gratefully received, as currently I can't use Outlook 2011 on either Mac.

    Hi guys!
    I am also having big trouble syncing my iCloud acc. I am able to send email, but i cannot recieve any. I have tried almost everything. I have tried using p01, p02, p99 servers, without solving the problem. I have tryed typing "INBOX" and "/" in IMAP root, still not working. Have anyone got a solution?
    I am using:
    OS X 10.9.1
    Outlook 2011 for mac v. 14.3.8
    I really hope someone has got an answer!
    Sorry the text in the screenshots are in danish. I hope you get the idea anyway.

  • Issues with Samsung SSD after Mavericks

    I bought a Samsung SSD 830 in the Summer of 2011 (for my Mid 2010 MacBook Pro), and it's been working fantastically until I upgraded to Mavericks. What's peculiar is that my computer works fine when it's plugged in to my Time Machine external HD via Airport. When I disconnect it from my home setup to take it elsewhere, it stops responding after some time. What I mean is that none of my open files (e.g., Word) are able to save, and when I click Finder, it's completely blank and can't take me to any of my folders. Likewise, in the spotlight search, when I try to find a program or file, it does not show me anything aside from a possible definition of the word which I searched from Dictionary.
    I contacted Samsung not too long ago and the tech support guy said that the SSD isn't as good on Macs as it is on PCs, and that I may better be better off returning to the optical HD (which I do not desire to do).
    It's important that I mention no problems with hardware (I brought my laptop to the Apple store and they did not see any damage with wiring and etc. for my HD). Likewise, all the diagnostic tests come in just fine. I also upgraded my RAM to 8 GBs around the same time as installing the HD.
    If the Samsung is truly a lost cause, what would be a recommendation for another quality SSD for my Mac on Maverics?
    Hopefully there is light at the end of this tunnel!

    "The problem was fixed for a little bit, but then arose again...."
    Since the problem was fixed you should do a clean install this time of Mavericks 10.9.1
    You would need to find out which application  / program you install on your clean  MacBook Pro makes your system slow and stop responding.

  • Issue With Supplier Interface

    Hi All,
    I inserted a record in ap_suppliers_int table and ran Supplier Open Interface Import. It is completed .. normal.
    But the status is REJECTED in ap_supllier_int with no values in reject_code and import_request_id.
    No entry in ap_supplier_int_rejections table also.
    How to go about this ?
    Can anybody guide me please.
    -- Saritha

    the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
    ==========================
    ==========================
    P_WHAT_TO_IMPORT='ALL'
    P_COMMIT_SIZE='1000'
    P_PRINT_EXCEPTIONS='Y'
    P_DEBUG_SWITCH='Y'
    P_TRACE_SWITCH='Y'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    LOG :
    Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
    Logged onto server:
    Username:
    LOG :
    Logged onto server:
    Username: APPS
    MSG MSG-00001: After SRWINIT
    MSG MSG-00002: After Get_Company_Name
    MSG MSG-00003: After Get_NLS_Strings
    ERR REP-1419: 'beforereport': PL/SQL program aborted.
    is anyone got solution and can anybody get me out of this situation
    thanks in advance
    regards
    anwer

  • Issue with Supplier site descriptive flex field upgrade from 11i to R12

    We ran into some issue when upgrade Supplier site descriptive flex field from 11i to R12.
    In 11i. we defined descriptive field on JG_PO_VENDOR_SITES. in the segment definition, we defined one of the attributes default value based on Form Field Value, and the statement is like this:
    SELECT decode(:SITE.COUNTRY,'IT','AP ITALIAN TRANSACTIONS','AP AUTOFATTURA') FROM dual
    All above worked fine in 11i, whenever the flexfield field is open in forms, the default valuse shows based on the real-time value in :SITE.COUNTRY.
    In R12, Supplier site management is in HTML format. There is no forms, which means no form value. Do you have an alternative soluction for implement the same logic in R12?
    Thank you and regards,
    Kate
    Edited by: user12100435 on Feb 12, 2013 9:06 AM

    Kate,
    Have you logged a SR and see if Oracle support can help?
    Thanks,
    Hussein

  • Hello everyone!  I am having issues with my MacBook Pro early 2011 13 in.  When I boot up it starts to boot up and never finishes.  The screen just continues to have the apple and spinning circle on it.  Any recommendations?

    When restarting my computer the screen is freezing on the apple and spinning icon.  It never finishes booting.  Anyone know how to fix this?

    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Itunes slow and sputtering  --  frequent issue with many

    well so much for an update. after updating to latest itunes, 7.0.2.16, my songs and movies skip and run slow.
    i have tried all the fixes: new sound card driver, delete quicktime and reinstall, sound enhancer conflict, no plug ins, hardware excelleration...
    i cannot listen to my music, and its all locked in the skin of the apple. dang.
    help me apple, please help me, and the others - or how about admitting there is a problem so i can quit tweeking the @#$% out of my computer.
    PS: i do not have a pavillion laptop or a dell desktop, like so many with this problem seem to have.
    respectfully.
    amd - fast-2005   Windows XP Pro   1 gb ram

    You can try one more thing. It's a bit of a hack, but it's worked for many, many people.
    Find and install Foobar 2000.
    Then find and install the "multi-plugin for iTunes" and install it.
    Open up Foobar and set it to use KERNAL streaming. Close Foobar. and give it a go.
    That's the only other suggestion I can think of that you haven't already tried.
    iTunes skin with Foobar sound engine = good to go.
    iTunes for windows needs a major overhaul. It's laggy, too limited in the codecs that can be used, and has no kernal streaming. (sigh)
    They really need to do something fast.

  • Issues with installing office for mac 2011

    I am trying to load software microsoft office for mac 2011 (dvd) onto 2007 imac running OSX 10.9.2 however software disc keeps being ejected after attempt to install and will not load. aple chat support suggested PRAM reboot which i have done however no improvement appreciate help Tony

    Hi,
    This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc. But I find your question is related to the installing of Office for Mac 2011. So I suggest you posting it in Office
    for Mac support for more effective responses.
    Thanks.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • App-V 5.0 SP1 Client package publishing error 0x4C401C0C-0x80070057

    Hi there I need some help with some specific error which others also seem to have. But because there are different threads with partial different error codes and scenarios, i decided to create a new thread for my problem with exact environment specif

  • MBP starts up in Single User Mode by default..

    I restarted the machine because the trackpad was acting up. After file vault reclaimed unused disk space, the computer restarted with a black screen with "localhost :/ root#" in the upper left screen. I know very little unix so please forgive my lack

  • How to run a workbook in Viewer 4i

    I need to run workbook from Apps menu which is using Discoverer Viewer 4i but I created this workbook in Discoverer 10g. My problem is am not able to view the 10g EUL in which I created this workbook under Discoverer Viewer 4i Options-->End User Laye

  • Merit and Demerit of SuperBom

    Dear Experts I am investigating about SUPERBOM. I would like to know its MERIT and DEMERIT. What I am thinking is below. If you have other ideas, please add. Merit 1. Manufucturer can handle various demand from clients and customers. 2.Efficiency of

  • AT LINE SELEVCTION problem

    Hi SDN, I am displaying on out put screen. SalesOrder Delivery Invoice in one row. i want to call separate list on clicking of SalesOrder Delivery Invoice, i.e. when SalesOrder is clicked list for SO details, Delivery is clicked then list for deliver