Frequent laptop hang
Hi All,
Bit of a vague problem here with my laptop hanging. I have a Dell E6320. Installed Arch on it a few months ago, and it was running just fine for a while. Recently it has developed the habit of hanging on me, at seemingly random intervals. Everything just stops. Desktop is frozen, keyboard unresponsive. My only recourse has been a hard restart. I've looked in the logs but haven't seen anything that would indicate a problem. Below is a extract from everything.log. Around 18:49 I booted the machine up. Sometime between 19:01 and 19:16 the OS hung again.
Jul 8 18:50:46 localhost blueman-mechanism: Exiting
Jul 8 18:50:48 localhost dbus[516]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
Jul 8 18:50:48 localhost dbus[516]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
Jul 8 19:01:01 localhost /USR/SBIN/CROND[2368]: (root) CMD (run-parts /etc/cron.hourly)
Jul 8 19:16:03 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 8 19:16:03 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 8 19:16:03 localhost kernel: [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
Jul 8 19:16:03 localhost kernel: [ 0.000000] Command line: root=/dev/mapper/rootvg-rootlv ro logo.nologo quiet
Jul 8 19:16:03 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
I have no idea how to proceed at this point. I believe this new behaviour started with the update to the 3.4 kernel, but I am not sure about that.
Any pointers on how to troubleshoot this would be appreciated.
Cheers,
Mark
Thanks for the replies. Nothing in dmesg or any of the logs. Or at least nothing I would consider suspicious. It just went down on me again a few minutes ago.
Here are the logs spanning the hang and restart:
Jul 9 13:01:49 localhost blueman-mechanism: Starting blueman-mechanism
Jul 9 13:01:49 localhost dbus[560]: [system] Successfully activated service 'org.blueman.Mechanism'
Jul 9 13:01:49 localhost blueman-mechanism: loading Config
Jul 9 13:01:49 localhost blueman-mechanism: loading Network
Jul 9 13:01:49 localhost blueman-mechanism: loading RfKill
Jul 9 13:01:49 localhost blueman-mechanism: loading Ppp
Jul 9 13:01:50 localhost kernel: [ 76.029047] EXT4-fs (dm-3): re-mounted. Opts: commit=0
Jul 9 13:02:19 localhost blueman-mechanism: Exiting
Jul 9 13:02:25 localhost dbus[560]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
Jul 9 13:02:25 localhost dbus[560]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
Jul 9 13:22:25 localhost -- MARK --
Jul 9 13:42:25 localhost -- MARK --
Jul 9 13:44:48 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 9 13:44:48 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 9 13:44:48 localhost kernel: [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
Jul 9 13:44:48 localhost kernel: [ 0.000000] Command line: root=/dev/mapper/rootvg-rootlv ro logo.nologo quiet
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Jul 9 13:44:48 localhost kernel: [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Jul 9 13:44:48 localhost syslog-ng[518]: syslog-ng starting up; version='3.3.5'
I'll try running the live CD for a while. I have some fresh Mint 13 downloads. I'll give one of them a shot. I suspect they will work just fine, given the differences between my config (Arch + XFCE + current Arch kernel) and the live CD config.
Thanks again,
Mark
Similar Messages
-
At the BIOS updating the HP Pavilion zd7000 laptop hanged
At the HP Pavilion zd7000 laptop BIOS updating from a site HP.com (the file sp33465.exe, OC Windows XP) the laptop hanged and to a BIOS it was not established. Now at inclusion all bulbs burn, but the laptop doesn't submit life signs, fans,
NDD don't work. The BIOS.bak file remained, but with USB-Flash it is impossible to establish. At USB-Flash connection it
3 times blink and is disconnected. Prompt how to return BIOS.Thanks for the answer. On the bottom cover there is a bar code and number - DP080AVR MFQ# 2CB41216S4 Made in Taiwan.
Any error messages on the screen wasn't and isn't present. Updating hanged approximately for 40 % -
6 dark blue segments. After laptop switching off, approximately in 1 hour, it doesn't join any more, and at all doesn't submit
any signs of work. All light-emitting diodes on the top panel only burn. -
[Solved] Laptop hangs at boot.
Hi,
Since today, my laptop hangs at boot (after I input my password for disk encryption). If I boot without 'quiet' the last message is "Started LVM2 PV scan on device 254:0" as well as some messages about Bluetooth. After these, simply nothing happens.
The last change I made to my system before this problem started to occur was to patch xf86-input-synaptics with this patch for palm detection: https://gist.github.com/silverhammermba … caa63c86f1 I'm not sure if this is related, but I can't think of anything else I changed.
Is there a way I can at least get a shell so I can view dmesg output or try to revert to the default synaptics driver?
Regards,
wo0p
Last edited by wo0p (2015-06-19 21:06:53)Thanks, I managed to get to a shell using CTRL + ALT + F2. I was certain I tried that, but I might have been hitting CTRL + ALT + 2 the whole time, quite embarrassing...
Can I just revert to the repository version of xf86-input-synaptics by removing it with pacman -R and then reinstalling with pacman -S ? If so, this doesn't fix my problem.
I looked through dmesg and the journal but couldn't see any errors. Is there something I missed?
EDIT: Thanks for the help, I think the problem was that installing the package had created a config (with .pacnew) in the /etc/X11/xorg.conf.d/ directory which caused the problems.
I would still like to know if I can revert to the repository version of a package in the way I outlined above though.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.5-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c71d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c71da000-0x00000000c7541fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7542000-0x00000000caa82fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa83000-0x00000000caae1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caae2000-0x00000000cb2e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb2e4000-0x00000000cc46bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc46c000-0x00000000ccee4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccee5000-0x00000000ccffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd800000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xcb6e8000 ACPI 2.0=0xcb6e8000 SMBIOS=0xcce2d998
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f29000) (14MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f29000-0x0000000010000000) (240MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000010000000-0x000000001000b000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000001000b000-0x000000003675a000) (615MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003675a000-0x00000000373a5000) (12MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000373a5000-0x000000008da14000) (1382MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008da14000-0x00000000bf558000) (795MB)
[ 0.000000] efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf558000-0x00000000bf598000) (0MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bf598000-0x00000000c62f8000) (109MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000c62f8000-0x00000000c6316000) (0MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c6316000-0x00000000c71da000) (14MB)
[ 0.000000] efi: mem15: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c71da000-0x00000000c7542000) (3MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7542000-0x00000000c7548000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7548000-0x00000000c8419000) (14MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c8419000-0x00000000ca483000) (32MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ca483000-0x00000000ca7de000) (3MB)
[ 0.000000] efi: mem20: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ca7de000-0x00000000caa83000) (2MB)
[ 0.000000] efi: mem21: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000caa83000-0x00000000caae2000) (0MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000caae2000-0x00000000cb2da000) (7MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000cb2da000-0x00000000cb2e4000) (0MB)
[ 0.000000] efi: mem24: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cb2e4000-0x00000000cc46c000) (17MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cc46c000-0x00000000ccee5000) (10MB)
[ 0.000000] efi: mem26: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ccee5000-0x00000000ccfff000) (1MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ccfff000-0x00000000cd000000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000022f000000) (4848MB)
[ 0.000000] efi: mem29: [Reserved | | | | | | | | | ] range=[0x00000000cd800000-0x00000000d0000000) (40MB)
[ 0.000000] efi: mem30: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem32: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem33: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem34: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem35: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX303LNB/UX303LNB, BIOS UX303LNB.203 12/10/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 00C8000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 00CC000000 mask 7FFF000000 write-back
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back
[ 0.000000] 7 base 0230000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 022F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x22edfffff]
[ 0.000000] [mem 0x220000000-0x22edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc71d9fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc6ffffff] page 2M
[ 0.000000] [mem 0xc7000000-0xc71d9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc7542000-0xcaa82fff]
[ 0.000000] [mem 0xc7542000-0xc75fffff] page 4k
[ 0.000000] [mem 0xc7600000-0xca9fffff] page 2M
[ 0.000000] [mem 0xcaa00000-0xcaa82fff] page 4k
[ 0.000000] BRK [0x01b21000, 0x01b21fff] PGTABLE
[ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcaae2000-0xcb2e3fff]
[ 0.000000] [mem 0xcaae2000-0xcabfffff] page 4k
[ 0.000000] [mem 0xcac00000-0xcb1fffff] page 2M
[ 0.000000] [mem 0xcb200000-0xcb2e3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[ 0.000000] [mem 0xccfff000-0xccffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3675a000-0x373a4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CB6E8000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000CB6E80B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CB701590 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CB6E8218 019372 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CC469F80 000040
[ 0.000000] ACPI: APIC 0x00000000CB7016A0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CB701728 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CB701770 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000CB701810 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000CB7018D8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CB701918 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB701950 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000CB701C68 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CB701CB0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000CB702930 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CB7029D0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB702F10 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB703A88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB706CD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000CB707068 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB7070D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB707BA0 006622 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CB70E1C8 0006CE (v02 SgRef SgPch 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000CB70E898 0000A8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000CB70E940 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CB70E978 001914 (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x00000000CAAE0E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22eff8000-0x22effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c71d9fff]
[ 0.000000] node 0: [mem 0x00000000c7542000-0x00000000caa82fff]
[ 0.000000] node 0: [mem 0x00000000caae2000-0x00000000cb2e3fff]
[ 0.000000] node 0: [mem 0x00000000ccfff000-0x00000000ccffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[ 0.000000] On node 0 totalpages: 2072250
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12925 pages used for memmap
[ 0.000000] DMA32 zone: 827166 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x24])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x48])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x49])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0x4c])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc71da000-0xc7541fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaa83000-0xcaae1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb2e4000-0xcc46bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc46c000-0xccee4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccee5000-0xccffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd800000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88022ec00000 s86232 r8192 d32552 u524288
[ 0.000000] pcpu-alloc: s86232 r8192 d32552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039847
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8015668K/8289000K available (5629K kernel code, 840K rwdata, 1784K rodata, 1160K init, 1152K bss, 273332K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.256 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.03 BogoMIPS (lpj=7980853)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20150204
[ 0.026322] ACPI: All ACPI Tables successfully acquired
[ 0.028669] Security Framework initialized
[ 0.028673] Yama: becoming mindful.
[ 0.029045] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030311] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030856] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031022] Initializing cgroup subsys blkio
[ 0.031024] Initializing cgroup subsys memory
[ 0.031029] Initializing cgroup subsys devices
[ 0.031030] Initializing cgroup subsys freezer
[ 0.031032] Initializing cgroup subsys net_cls
[ 0.031051] CPU: Physical Processor ID: 0
[ 0.031051] CPU: Processor Core ID: 0
[ 0.031056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.031056] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.031963] mce: CPU supports 7 MCE banks
[ 0.031974] CPU0: Thermal monitoring enabled (TM1)
[ 0.032002] process: using mwait in idle threads
[ 0.032005] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032006] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032281] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.033915] ftrace: allocating 21316 entries in 84 pages
[ 0.041185] dmar: Host address width 39
[ 0.041187] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.041194] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.041195] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.041199] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.041199] dmar: RMRR base: 0x000000cce3e000 end: 0x000000cce4cfff
[ 0.041200] dmar: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[ 0.041202] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.041203] HPET id 0 under DRHD base 0xfed91000
[ 0.041484] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.041495] Enabled IRQ remapping in xapic mode
[ 0.041496] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.042099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075131] TSC deadline timer enabled
[ 0.075133] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (fam: 06, model: 3d, stepping: 04)
[ 0.075153] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.075157] ... version: 3
[ 0.075158] ... bit width: 48
[ 0.075159] ... generic registers: 4
[ 0.075159] ... value mask: 0000ffffffffffff
[ 0.075160] ... max period: 0000ffffffffffff
[ 0.075161] ... fixed-purpose events: 3
[ 0.075161] ... event mask: 000000070000000f
[ 0.095289] x86: Booting SMP configuration:
[ 0.095291] .... node #0, CPUs: #1
[ 0.109467] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116159] #2 #3
[ 0.150974] x86: Booted up 1 node, 4 CPUs
[ 0.150977] smpboot: Total of 4 processors activated (19161.13 BogoMIPS)
[ 0.154621] devtmpfs: initialized
[ 0.156400] PM: Registering ACPI NVS region [mem 0xcb2e4000-0xcc46bfff] (18382848 bytes)
[ 0.156672] pinctrl core: initialized pinctrl subsystem
[ 0.156705] RTC time: 20:30:15, date: 06/19/15
[ 0.156793] NET: Registered protocol family 16
[ 0.167829] cpuidle: using governor ladder
[ 0.181188] cpuidle: using governor menu
[ 0.181212] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.181214] ACPI: bus type PCI registered
[ 0.181215] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.181275] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.181277] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.181347] PCI: Using configuration type 1 for base access
[ 0.194800] ACPI: Added _OSI(Module Device)
[ 0.194802] ACPI: Added _OSI(Processor Device)
[ 0.194803] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194804] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197821] ACPI : EC: EC description table is found, configuring boot EC
[ 0.200562] ACPI: Executed 8 blocks of module-level executable AML code
[ 0.206934] ACPI: Dynamic OEM Table Load:
[ 0.206939] ACPI: SSDT 0xFFFF880224F79000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.207792] ACPI: Dynamic OEM Table Load:
[ 0.207796] ACPI: SSDT 0xFFFF880224EFA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.208691] ACPI: Dynamic OEM Table Load:
[ 0.208695] ACPI: SSDT 0xFFFF880224F59800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.210219] ACPI: Interpreter enabled
[ 0.210227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.210234] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.210245] ACPI: (supports S0 S3 S4 S5)
[ 0.210246] ACPI: Using IOAPIC for interrupt routing
[ 0.210268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212136] ACPI: Power Resource [PG00] (on)
[ 0.212420] ACPI: Power Resource [PG01] (on)
[ 0.212693] ACPI: Power Resource [PG02] (on)
[ 0.213679] ACPI: Power Resource [PC05] (on)
[ 0.220550] ACPI: Power Resource [FN00] (off)
[ 0.220603] ACPI: Power Resource [FN01] (off)
[ 0.220655] ACPI: Power Resource [FN02] (off)
[ 0.220707] ACPI: Power Resource [FN03] (off)
[ 0.220759] ACPI: Power Resource [FN04] (off)
[ 0.221480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.221485] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.221893] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.222200] PCI host bridge to bus 0000:00
[ 0.222202] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.222204] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.222205] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.222206] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.222208] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.222209] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.222210] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.222211] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.222212] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.222213] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.222214] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.222215] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.222216] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[ 0.222222] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.222300] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.222309] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf5ffffff 64bit]
[ 0.222314] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.222318] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.222391] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.222397] pci 0000:00:03.0: reg 0x10: [mem 0xf721c000-0xf721ffff 64bit]
[ 0.222476] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.222486] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit]
[ 0.222580] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.222595] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.222648] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.222690] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.222719] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.222734] pci 0000:00:16.0: reg 0x10: [mem 0xf7224000-0xf722401f 64bit]
[ 0.222786] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.222854] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.222869] pci 0000:00:1b.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit]
[ 0.222918] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222959] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.222986] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.223048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.223089] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.223118] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.223184] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.223224] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.223250] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[ 0.223307] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.223348] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.223382] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.223542] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.223554] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.223559] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.223565] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.223571] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.223576] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.223582] pci 0000:00:1f.2: reg 0x24: [mem 0xf7222000-0xf72227ff]
[ 0.223613] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.223670] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.223682] pci 0000:00:1f.3: reg 0x10: [mem 0xf7221000-0xf72210ff 64bit]
[ 0.223697] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.223776] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.223805] pci 0000:00:1f.6: reg 0x10: [mem 0xf7220000-0xf7220fff 64bit]
[ 0.224013] acpiphp: Slot [1] registered
[ 0.224017] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.224292] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.224423] pci 0000:02:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
[ 0.224907] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.231440] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.231445] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.231518] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
[ 0.231534] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.231547] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.231561] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.231570] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.231579] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.231660] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.237972] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.237975] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.237977] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.237982] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.238138] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.239089] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.239130] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239209] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239247] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239323] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.239770] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.239827] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.239900] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.239901] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.239903] vgaarb: loaded
[ 0.239904] vgaarb: bridge control possible 0000:00:02.0
[ 0.239990] PCI: Using ACPI for IRQ routing
[ 0.241093] PCI: pci_cache_line_size set to 64 bytes
[ 0.241127] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.241128] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.241129] e820: reserve RAM buffer [mem 0xc71da000-0xc7ffffff]
[ 0.241129] e820: reserve RAM buffer [mem 0xcaa83000-0xcbffffff]
[ 0.241130] e820: reserve RAM buffer [mem 0xcb2e4000-0xcbffffff]
[ 0.241131] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.241132] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.241211] NetLabel: Initializing
[ 0.241212] NetLabel: domain hash size = 128
[ 0.241213] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.241222] NetLabel: unlabeled traffic allowed by default
[ 0.241240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.241244] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.243265] Switched to clocksource hpet
[ 0.246853] pnp: PnP ACPI init
[ 0.246992] system 00:00: [io 0x0240-0x0259] has been reserved
[ 0.246995] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247057] pnp 00:01: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.247087] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.247149] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.247151] system 00:03: [io 0xffff] has been reserved
[ 0.247153] system 00:03: [io 0xffff] has been reserved
[ 0.247154] system 00:03: [io 0xffff] has been reserved
[ 0.247155] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.247156] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.247158] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247192] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247218] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.247220] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.247329] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.247330] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.247332] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.247334] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.247335] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.247336] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.247338] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.247339] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.247340] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.247341] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.247343] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.247344] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.247346] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247731] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248169] pnp: PnP ACPI: found 8 devices
[ 0.253940] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.253949] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.253952] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.253958] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.253960] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.253963] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.253966] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.253970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.253972] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.253973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.253974] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.253975] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.253976] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.253977] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.253979] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.253980] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.253981] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.253982] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.253983] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfeafffff window]
[ 0.253984] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.253986] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.253987] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.253988] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.254009] NET: Registered protocol family 2
[ 0.254153] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.254258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.254368] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.254382] TCP: reno registered
[ 0.254390] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.254411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.254449] NET: Registered protocol family 1
[ 0.254459] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.254627] PCI: CLS 64 bytes, default 64
[ 0.254658] Unpacking initramfs...
[ 0.419468] Freeing initrd memory: 12588K (ffff88003675a000 - ffff8800373a5000)
[ 0.419489] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.419492] software IO TLB [mem 0xc2316000-0xc6316000] (64MB) mapped at [ffff8800c2316000-ffff8800c6315fff]
[ 0.419632] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.419670] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419675] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419681] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419686] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x13
[ 0.419721] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.419738] Scanning for low memory corruption every 60 seconds
[ 0.419899] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.419912] Initialise system trusted keyring
[ 0.420141] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.421107] zpool: loaded
[ 0.421109] zbud: loaded
[ 0.421228] VFS: Disk quotas dquot_6.5.2
[ 0.421250] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.421369] Key type big_key registered
[ 0.421511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.421537] io scheduler noop registered
[ 0.421539] io scheduler deadline registered
[ 0.421558] io scheduler cfq registered (default)
[ 0.421962] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.421965] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.421974] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.421975] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.421977] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.421986] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.421987] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.421990] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.421994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.422004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.422016] efifb: probing for efifb
[ 0.422032] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
[ 0.422033] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.422034] efifb: scrolling: redraw
[ 0.422035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.425476] Console: switching to colour frame buffer device 240x67
[ 0.429197] fb0: EFI VGA frame buffer device
[ 0.429204] intel_idle: MWAIT substates: 0x11142120
[ 0.429205] intel_idle: v0.4 model 0x3D
[ 0.429205] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.429389] GHES: HEST is not enabled!
[ 0.429438] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.429759] Linux agpgart interface v0.103
[ 0.429798] rtc_cmos 00:04: RTC can wake from S4
[ 0.429904] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.429928] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.429937] Intel P-state driver initializing.
[ 0.430057] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.430573] TCP: cubic registered
[ 0.430824] NET: Registered protocol family 10
[ 0.431247] NET: Registered protocol family 17
[ 0.431931] Loading compiled-in X.509 certificates
[ 0.431964] registered taskstats version 1
[ 0.433023] Magic number: 3:29:549
[ 0.433038] clockevents clockevent0: hash matches
[ 0.433067] acpi PNP0C0F:00: hash matches
[ 0.433191] rtc_cmos 00:04: setting system clock to 2015-06-19 20:30:16 UTC (1434745816)
[ 0.433387] PM: Hibernation image not present or could not be loaded.
[ 0.434000] Freeing unused kernel memory: 1160K (ffffffff818d4000 - ffffffff819f6000)
[ 0.434003] Write protecting the kernel read-only data: 8192k
[ 0.434643] Freeing unused kernel memory: 504K (ffff880001582000 - ffff880001600000)
[ 0.434865] Freeing unused kernel memory: 264K (ffff8800017be000 - ffff880001800000)
[ 0.441392] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.458172] sdhci: Secure Digital Host Controller Interface driver
[ 0.458174] sdhci: Copyright(c) Pierre Ossman
[ 0.461368] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.464831] i8042: Detected active multiplexing controller, rev 1.1
[ 0.466075] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.466090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.466093] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.466095] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.466097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.467331] ACPI: bus type USB registered
[ 0.467357] usbcore: registered new interface driver usbfs
[ 0.467367] usbcore: registered new interface driver hub
[ 0.467449] usbcore: registered new device driver usb
[ 0.467882] SCSI subsystem initialized
[ 0.469036] libata version 3.00 loaded.
[ 0.469212] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.469219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.469295] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.469300] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.469567] hub 1-0:1.0: USB hub found
[ 0.469579] hub 1-0:1.0: 11 ports detected
[ 0.472290] AVX2 version of gcm_enc/dec engaged.
[ 0.472292] AES CTR mode by8 optimization enabled
[ 0.473751] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.473755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.473912] hub 2-0:1.0: USB hub found
[ 0.473922] hub 2-0:1.0: 4 ports detected
[ 0.475776] ahci 0000:00:1f.2: version 3.0
[ 0.486870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.486873] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.487298] scsi host0: ahci
[ 0.487404] scsi host1: ahci
[ 0.487499] scsi host2: ahci
[ 0.487602] scsi host3: ahci
[ 0.487645] ata1: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222100 irq 46
[ 0.487646] ata2: DUMMY
[ 0.487647] ata3: DUMMY
[ 0.487648] ata4: DUMMY
[ 0.518177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.807120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.808148] ata1.00: ATA-9: SanDisk SD7SB3Q256G1002, X2150000, max UDMA/133
[ 0.808151] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.809886] ata1.00: configured for UDMA/133
[ 0.810105] scsi 0:0:0:0: Direct-Access ATA SanDisk SD7SB3Q2 0000 PQ: 0 ANSI: 5
[ 0.811845] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.811926] sd 0:0:0:0: [sda] Write Protect is off
[ 0.811929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.811949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.813282] sda: sda1 sda2 sda3
[ 0.813602] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.833270] device-mapper: uevent: version 1.0.3
[ 0.833364] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
[ 0.833785] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.207444] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 1.381488] usb 1-8: No LPM exit latency info found, disabling LPM.
[ 1.420941] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 2.422042] Switched to clocksource tsc
[ 4.601817] NET: Registered protocol family 38
[ 5.500920] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.557255] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 5.557386] systemd[1]: Detected architecture 'x86-64'.
[ 5.557569] systemd[1]: Set hostname to <WOOP-PLUTO>.
[ 5.581258] systemd[1]: Unit type .busname is not supported on this system.
[ 5.609266] systemd[1]: Cannot add dependency job for unit vmware-USBArbitrator.service, ignoring: Unit vmware-USBArbitrator.service failed to load: No such file or directory.
[ 5.609648] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.609656] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.609676] systemd[1]: Reached target Login Prompts.
[ 5.609681] systemd[1]: Starting Login Prompts.
[ 5.609691] systemd[1]: Reached target Remote File Systems.
[ 5.609695] systemd[1]: Starting Remote File Systems.
[ 5.609816] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.609824] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.609831] systemd[1]: Reached target Encrypted Volumes.
[ 5.609836] systemd[1]: Starting Encrypted Volumes.
[ 5.610016] systemd[1]: Created slice Root Slice.
[ 5.610022] systemd[1]: Starting Root Slice.
[ 5.610045] systemd[1]: Listening on udev Control Socket.
[ 5.610051] systemd[1]: Starting udev Control Socket.
[ 5.610064] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.610069] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.610116] systemd[1]: Created slice User and Session Slice.
[ 5.610121] systemd[1]: Starting User and Session Slice.
[ 5.610163] systemd[1]: Created slice System Slice.
[ 5.610171] systemd[1]: Starting System Slice.
[ 5.610222] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.610228] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.610271] systemd[1]: Created slice system-rfkill\x2dblock.slice.
[ 5.610276] systemd[1]: Starting system-rfkill\x2dblock.slice.
[ 5.610318] systemd[1]: Created slice system-getty.slice.
[ 5.610323] systemd[1]: Starting system-getty.slice.
[ 5.610340] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.610345] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.610365] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.610370] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.612312] random: nonblocking pool is initialized
[ 5.620499] systemd[1]: Listening on Journal Audit Socket.
[ 5.620536] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.620543] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.620550] systemd[1]: Reached target Slices.
[ 5.620555] systemd[1]: Starting Slices.
[ 5.620589] systemd[1]: Listening on Journal Socket.
[ 5.620598] systemd[1]: Starting Journal Socket.
[ 5.620608] systemd[1]: Started File System Check on Root Device.
[ 5.620937] systemd[1]: Mounting Debug File System...
[ 5.621251] systemd[1]: Mounting Huge Pages File System...
[ 5.621859] systemd[1]: Started Load Kernel Modules.
[ 5.621874] systemd[1]: Mounted FUSE Control File System.
[ 5.622224] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.622646] systemd[1]: Starting Apply Kernel Variables...
[ 5.623622] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.623961] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.624013] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.624026] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.624427] systemd[1]: Starting Journal Service...
[ 5.624747] systemd[1]: Mounting Configuration File System...
[ 5.625120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.625185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.625194] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.625202] systemd[1]: Reached target Paths.
[ 5.625207] systemd[1]: Starting Paths.
[ 5.625476] systemd[1]: Starting Setup Virtual Console...
[ 5.625513] systemd[1]: Listening on udev Kernel Socket.
[ 5.625525] systemd[1]: Starting udev Kernel Socket.
[ 5.625917] systemd[1]: Starting udev Coldplug all Devices...
[ 5.626783] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.626862] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 214 (systemd-binfmt)
[ 5.627145] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 5.631100] systemd[1]: Started Setup Virtual Console.
[ 5.637366] systemd[1]: Started Apply Kernel Variables.
[ 5.638348] systemd[1]: Mounted Huge Pages File System.
[ 5.638376] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.638392] systemd[1]: Mounted Configuration File System.
[ 5.639302] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 5.639530] systemd-journald[216]: Failed to set file attributes: Inappropriate ioctl for device
[ 5.640253] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 5.640287] systemd[1]: Mounted Debug File System.
[ 5.642518] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.642721] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.642901] systemd[1]: Started udev Coldplug all Devices.
[ 5.650745] systemd[1]: Starting Load/Save Random Seed...
[ 5.650775] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 5.651626] systemd[1]: Started Rebuild Hardware Database.
[ 5.651645] systemd[1]: Started First Boot Wizard.
[ 5.651659] systemd[1]: Started Create System Users.
[ 5.651982] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.655137] systemd[1]: Started Load/Save Random Seed.
[ 5.673398] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.673906] systemd[1]: Starting udev Kernel Device Manager...
[ 5.673930] systemd[1]: Reached target Local File Systems (Pre).
[ 5.673941] systemd[1]: Starting Local File Systems (Pre).
[ 5.674530] systemd[1]: Mounting /tmp...
[ 5.676222] systemd[1]: Mounted /tmp.
[ 5.714702] systemd[1]: Started udev Kernel Device Manager.
[ 5.731901] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.732762] ACPI: Lid Switch [LID]
[ 5.732815] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 5.732819] ACPI: Sleep Button [SLPB]
[ 5.732867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.732870] ACPI: Power Button [PWRF]
[ 5.735236] systemd[1]: Started Journal Service.
[ 5.739454] ACPI: AC Adapter [AC0] (off-line)
[ 5.740472] systemd-journald[216]: Received request to flush runtime journal from PID 1
[ 5.741401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791768] [drm] Initialized drm 1.1.0 20060810
[ 5.797640] ACPI: Battery Slot [BAT0] (battery present)
[ 5.797836] wmi: Mapper loaded
[ 5.824171] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.845805] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 5.846099] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 5.846103] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.846105] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 5.846107] sound hdaudioC1D0: mono: mono_out=0x0
[ 5.846108] sound hdaudioC1D0: inputs:
[ 5.846111] sound hdaudioC1D0: Internal Mic=0x1a
[ 5.846113] sound hdaudioC1D0: Mic=0x19
[ 5.846718] sound hdaudioC1D0: Enable sync_write for stable communication
[ 5.846766] [drm] Memory usable by graphics device = 4096M
[ 5.846770] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 5.846773] fb: switching to inteldrmfb from EFI VGA
[ 5.846791] Console: switching to colour dummy device 80x25
[ 5.846944] [drm] Replacing VGA console driver
[ 5.849342] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
[ 5.849463] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 5.849490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 5.855615] thermal LNXTHERM:00: registered as thermal_zone2
[ 5.855618] ACPI: Thermal Zone [THRM] (48 C)
[ 5.858016] thermal LNXTHERM:01: registered as thermal_zone3
[ 5.858018] ACPI: Thermal Zone [TZ00] (28 C)
[ 5.858296] thermal LNXTHERM:02: registered as thermal_zone4
[ 5.858298] ACPI: Thermal Zone [TZ01] (30 C)
[ 5.858483] cfg80211: Calling CRDA to update world regulatory domain
[ 5.862994] Bluetooth: Core ver 2.20
[ 5.863009] NET: Registered protocol family 31
[ 5.863010] Bluetooth: HCI device and connection manager initialized
[ 5.863015] Bluetooth: HCI socket layer initialized
[ 5.863018] Bluetooth: L2CAP socket layer initialized
[ 5.863024] Bluetooth: SCO socket layer initialized
[ 5.866422] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 5.867516] Intel(R) Wireless WiFi driver for Linux
[ 5.867518] Copyright(c) 2003- 2014 Intel Corporation
[ 5.867886] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.867888] [drm] Driver supports precise vblank timestamp query.
[ 5.868042] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.870016] usbcore: registered new interface driver btusb
[ 5.877889] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
[ 5.880266] intel_rapl: Found RAPL domain package
[ 5.880269] intel_rapl: Found RAPL domain core
[ 5.880272] intel_rapl: Found RAPL domain uncore
[ 5.880274] intel_rapl: Found RAPL domain dram
[ 5.882922] media: Linux media interface: v0.10
[ 5.884691] Bluetooth: hci0: read Intel version: 370810011002270d00
[ 5.886215] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
[ 5.918064] Linux video capture interface: v2.00
[ 5.921474] iTCO_vendor_support: vendor-support=0
[ 5.922849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.922892] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 5.922978] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.923412] asus_wmi: ASUS WMI generic driver loaded
[ 5.930495] fbcon: inteldrmfb (fb0) is primary device
[ 5.932627] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x184
[ 5.933078] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.933238] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.933985] asus_wmi: Initialization: 0x1
[ 5.934961] asus_wmi: BIOS WMI version: 7.9
[ 5.935116] asus_wmi: SFUN value: 0xa2077
[ 5.936702] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 5.937631] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.937749] Adding 8388604k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:8388604k SSFS
[ 5.938748] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 5.941016] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 5.943447] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[ 5.945744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[ 5.945833] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150204/video-1257)
[ 5.945834] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 5.945879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input18
[ 5.945995] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.945999] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 5.946115] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150204/utaddress-254)
[ 5.946120] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 5.946121] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.949372] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 5.949434] usbcore: registered new interface driver uvcvideo
[ 5.949435] USB Video Class driver (1.1.1)
[ 6.030252] usb 1-8: USB disconnect, device number 3
[ 6.030362] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19)
[ 6.030393] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 6.030780] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 6.030895] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 6.030945] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.031170] asus_wmi: Backlight controlled by ACPI video driver
[ 6.032320] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.036491] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 6.054693] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15
[ 6.056212] mousedev: PS/2 mouse device common for all mice
[ 6.497765] bbswitch: version 0.8
[ 6.497769] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 6.497773] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
[ 6.497783] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 6.497854] bbswitch: detected an Optimus _DSM function
[ 6.497904] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
[ 6.499057] bbswitch: disabling discrete graphics
[ 6.499065] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 6.794166] /dev/vmmon[384]: Module vmmon: registered with major=10 minor=165
[ 6.794169] /dev/vmmon[384]: Module vmmon: initialized
[ 6.816392] Guest personality initialized and is inactive
[ 6.816436] VMCI host device registered (name=vmci, major=10, minor=56)
[ 6.816437] Initialized host personality
[ 6.847875] NET: Registered protocol family 40
[ 6.870900] fuse init (API version 7.23)
[ 6.898024] ppdev: user-space parallel port driver
[ 7.106012] Console: switching to colour frame buffer device 240x67
[ 7.110124] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.110125] i915 0000:00:02.0: registered panic notifier
[ 7.148418] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 7.148675] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 7.159323] /dev/vmnet: open called by PID 505 (vmnet-bridge)
[ 7.159334] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 7.159355] /dev/vmnet: port on hub 0 successfully opened
[ 7.159363] bridge-wlp2s0: device is wireless, enabling SMAC
[ 7.159366] bridge-wlp2s0: up
[ 7.159370] bridge-wlp2s0: attached
[ 7.161385] bridge-wlp2s0: disabling the bridge
[ 7.172268] bridge-wlp2s0: down
[ 7.172274] bridge-wlp2s0: detached
[ 7.549177] cfg80211: Calling CRDA to update world regulatory domain
[ 7.631166] /dev/vmnet: open called by PID 526 (vmnet-netifup)
[ 7.631172] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 7.631183] /dev/vmnet: port on hub 1 successfully opened
[ 7.649431] /dev/vmnet: open called by PID 528 (vmnet-dhcpd)
[ 7.649442] /dev/vmnet: port on hub 1 successfully opened
[ 7.659803] /dev/vmnet: open called by PID 536 (vmnet-natd)
[ 7.659810] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 7.659822] /dev/vmnet: port on hub 8 successfully opened
[ 7.662044] /dev/vmnet: open called by PID 537 (vmnet-netifup)
[ 7.662051] /dev/vmnet: port on hub 8 successfully opened
[ 7.672419] /dev/vmnet: open called by PID 542 (vmnet-dhcpd)
[ 7.672431] /dev/vmnet: port on hub 8 successfully opened
[ 8.032979] Bluetooth: hci0 command 0xfc8e tx timeout
[ 8.033056] Bluetooth: hci0 sending frame failed (-19)
[ 8.140139] cfg80211: Calling CRDA to update world regulatory domain
[ 10.041263] Bluetooth: hci0 command 0xfc11 tx timeout
[ 16.036148] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
[ 421.253320] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[ 421.429257] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 421.429265] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 421.439571] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 421.439662] scsi host4: usb-storage 1-1:1.0
[ 421.439732] usbcore: registered new interface driver usb-storage
[ 421.440704] usbcore: registered new interface driver uas
[ 422.802584] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 4
[ 422.803405] sd 4:0:0:0: [sdb] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 422.804030] sd 4:0:0:0: [sdb] Write Protect is off
[ 422.804039] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 422.804680] sd 4:0:0:0: [sdb] No Caching mode page found
[ 422.809996] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 422.816610] sdb:
[ 422.818457] sd 4:0:0:0: [sdb] Attached SCSI removable disk
-- Logs begin at Sat 2015-05-02 12:41:07 CEST, end at Fri 2015-06-19 22:40:49 CEST. --
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Runtime journal is using 8.0M (max allowed 394.6M, trying to leave 591.9M free of 3.8G available → current limit 394.6M).
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Permanent journal is using 1.4G (max allowed 4.0G, trying to leave 4.0G free of 120.7G available → current limit 4.0G).
Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Time spent on flushing to /var is 31.618ms for 2 entries.
Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpuset
Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpu
Jun 19 22:30:21 WOOP-PLUTO kernel: Initiali -
My HCL Laptop Hang When i use LINKSYS ROUTER WRT300N
LINKSYS,
I think you help me to solve my problem, i am using HCL Notebook P7910, And LINKSYS ROUTER WRT300N (V.1, Latest Firmware).
Problem is when i use through LAN cable then working Fine but when i use THROUGH WI-FI then my laptop HANG.
I also Contact with both coustomer cares, but problem not solved.
what can i do both products are in warranty , warranty expire in next 1 month.Try these settings:
Radio Band – 40
Wide Channel – 6
Standard Channel – 11 -
Laptop Hangs and taking too much time to startup- Staellite A300- PSAGCE- Win7
Dear Friend,
My Toshiba laptop- Satellite A300 -PSAGCE, working with Windows 7 Ultimate, is hanging in between use.
is is taking more time for starup also.
I had reformatted and installed new OS many times and still it is showing the problem.
Can you please advise me what i have to do to make it correct and what may be the cause of this problem.
Thanks in advanceMaybe these help.
Windows for better performance
Ways to improve your computer's performance
Open the Performance troubleshooter
If you reply, let us know which Satellite A300 you have. The model designation looks something like Satellite A300-1OM. The part number looks something like PSAG8E-02Q00TEN.
Is that 32-bit Windows 7?
-Jerry -
Laptop hang when I use second display
Hallo
I have problem with my Lenovo W510 (4319-66G). When I don't use my laptop for a while, it hang. This problem is only when I connect by VGA second display. I restored system and I installed all updates (windows and lenovo), I have still this same problem. I think that the system hang when laptop try to go standby. Could me someone help.
Solved!
Go to Solution.Download the latest Nvidia driver , hope this solve your problems.
http://www.nvidia.com/object/notebook-win7-winvista-64bit-280.26-whql-driver.html
Best Regards
Peter
=============================================
Does someone post helps you? Give them a kudos as a reward, as they will do better to improve
Refunded Set: W510, 4876-A11
Current Set: W520, 4284-A99
I would welcome T520 or W520 users to try this sound optimization:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Sound-Enhancement-Thread/m-p/451401#M1551... -
Laptop hanging in battery mode
Hi,
I am using HP G42 model notebook with win 7 OS. My laptop getting hanged when i change the power to batttery mode. The CPU utilization is going to peak and i am not able to do anything in my laptop. If i replugged the power back the laptop working normal.
Requesting your help and support.
Thanks.
Regards,
Senthil MuruganThis may be the same issue from a similar forum? Check this out:
http://discussions.apple.com/thread.jspa?threadID=303887&tstart=0
Here's my problem (posted there as well):
====================================
I'm having the same problems that most of you have mentioned. I'll run through them here:
+ I too have had my PowerBook G4 for about 3 years, and my battery has worked fine. Until this week.
+ The battery status indicator is stuck on "calculating..." whenever I'm running on battery power. For days now, when the battery is 99% and when the battery is 10%, still "calculating..."
+ I've reset the PRAM, and the PMU. I've recalibrated the battery a couple of times.
+ My battery life is still quite strong. Or at least it was. A few days ago I was able to use it for a couple of hours on the battery, which isn't too bad. At its best, it only ran for about 3 hours.
+ Like someone else mentioned, my battery drains much faster on standby/sleep than it used to. I can leave it on standby nearly fully charged, and when I open it up just an hour later it is down to just 5% and it shuts down almost immediately.
+ Another really annoying thing is that the % calculation is erratic. My powerbook shuts down when the charge is 40% to 50%, and time remaining is almost one hour, with no warning message given.
+ I almost never get a low level warning before the battery dies and it goes to sleep.
I'll be calling applecare shortly and will post anything useful I learn.
PowerBookG4 Mac OS X (10.3.9) -
I turn on my laptop and log in password to get into windows 8. This takes forever even though I don't use it frequently. Once inside, whenever I try to open up a program like explorer or anything else, the computer will not open it. The pointer arrow will move along and show signs that is trying to complete the operation but it will simply not happen no matter how much I wait. Could someone please explain or suggest what should be done?
So you can't open anything?! You might need to reinstall windows.
-
Yosemite 10.10.2 won't shut down and experience frequent finder hangs.
Help! I've only bough my Macbook Air latest version just 3 months ago and now it's giving me lots of headache.
My finder hangs frequently - sometimes during work - the other apps I'm running I'm fine but finder won't respond - I'm unable to open windows, and when I drag my mouse to the desk top, I see a spinning wheel.
When I quit my MAC, sometimes it'll hang at the finder and stop my computer from shutting down.
Tried force quit - won't work
Tried right click on finder - it'll show - finder not responding -
Eventually have to force myself to shut down the computer
I've used disk utility and attempted to fix some permissions.
One of the log shows:
"Warning: SUID file "systems/Library/CoreServices/RemoteManagemtn/ARDAgent.app/contents/MACOS/ARDAg ent" has been modified and will not be repaired."
I have not idea what that ARD Agent thing is. Tried finder search I got nothing back.
It also repaired some 'Printers.plist" as well and "Private/var/db/displaypolicyd"
I've run disk utility on different days and there's usually something to 'fix'.
But no matter what I do, my finder still hangs and I wonder if there's anything can be done tProblem description:
computer finder hangs
unable to log out or shut down
EtreCheck version: 2.1.8 (121)
Report generated 5 April 2015 5:50:16 am GMT+8
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Early 2014) (Technical Specifications)
MacBook Air - model: MacBookAir6,2
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 60
Video Information: ℹ️
Intel HD Graphics 5000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:4:9
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 499.10 GB (357.97 GB free)
Encrypted AES-XTS Unlocked Paused
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 20
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.logitech.manager.kernel.driver (4.10.1 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.citrix.AuthManager_Mac.plist [Click for support]
[running] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[running] com.logitech.manager.daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Logi Preference Manager [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.10 GB Disk used: 141.13 GB
Destinations:
TimeMachineBackup [Network]
Total size: 1.92 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 1.92 TB > (Disk size 499.10 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
1% syncdefaultsd
1% fontd
0% com.apple.iCloudHelper
0% AppleSpell
Top Processes by Memory: ℹ️
103 MB Safari
86 MB Dropbox
86 MB Finder
69 MB mds_stores
69 MB CalendarAgent
Virtual Memory Information: ℹ️
4.74 GB Free RAM
2.47 GB Active RAM
597 MB Inactive RAM
791 MB Wired RAM
1.12 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Apr 5, 2015, 05:45:53 AM Self test - passed
Apr 4, 2015, 08:13:40 PM /Library/Logs/DiagnosticReports/AddressBookSourceSync_2015-04-04-201340_[redact ed].cpu_resource.diag [Click for details]
Apr 3, 2015, 08:28:55 AM /Library/Logs/DiagnosticReports/WindowServer_2015-04-03-082855_[redacted].crash
Apr 3, 2015, 08:14:30 AM /Library/Logs/DiagnosticReports/sharingd_2015-04-03-081430_[redacted].crash
Apr 3, 2015, 06:58:13 AM /Library/Logs/DiagnosticReports/Preview_2015-04-03-065813_[redacted].hang
Apr 3, 2015, 06:57:31 AM /Library/Logs/DiagnosticReports/Preview_2015-04-03-065731_[redacted].hang
Apr 3, 2015, 12:07:43 AM /Library/Logs/DiagnosticReports/iTunes_2015-04-03-000743_[redacted].hang
Apr 3, 2015, 12:04:30 AM /Library/Logs/DiagnosticReports/AddressBookSourceSync_2015-04-03-000430_[redact ed].cpu_resource.diag [Click for details]
Apr 2, 2015, 10:41:18 PM /Library/Logs/DiagnosticReports/Preview_2015-04-02-224118_[redacted].hang
Apr 2, 2015, 04:48:33 PM /Library/Logs/DiagnosticReports/Mail_2015-04-02-164833_[redacted].cpu_resource. diag [Click for details]
Apr 2, 2015, 02:52:58 PM /Library/Logs/DiagnosticReports/Finder_2015-04-02-145258_[redacted].hang -
Since upgrade to 10.5.8, frequent temporary hangs (spinning beachball)
Good day!
Since updating to 10.8.5 on my MacBook Pro (15" unibody design), I'm encountering frequent visits (every 5 to 10 minutes) by the spinning beachball which last for 30 seconds or so.
At first I thought something might be slurping up all the processor power, but Activity Monitor isn't showing anything. The one thing I haven't checked yet is whether it still happens if I'm not connected via AirPort. The incidents do not appear to be limited to apps using the Internet.
Any great ideas? Thanks!Been having the same issues happening on the same machine as you. I did this yesterday, and so far so good.
1. Restart in safe mode (Hold down shift key when you hear the chime)
2. Under Applications > Utilities > Disk Utilities, select your hard drive on the left column, and click "Repair Permissions"
3. Once done, restart
It's been a day since I've done this, and no beachballs yet (fingers crossed) -
We are in the process of trying to migrate our application from weblogic
8.1 to weblogic 9.2. I am noticing several times during the day that the
weblogic console hangs. Cntrl-C does not terminate the jvm I have to use
kill -9
I am running on Solaris 9
Any help would be appreciatedYou've got an incompatible Logitech driver and java was incompletely uninstalled.
You may have a problem with the Wacom driver.
I don't know if fixing those things will help.
There also a few window server errors, but I don't know if they are causal.
If you can note the time of the hangs, that might help narrow it down in the logs. -
Laptop Hangs at boot - *ERROR* Unclaimed register detected.
I have a Dell Inspiron 17R 5737 laptop and I am getting issues with it using Linux.
When I try to turn on the computer sometimes I get this message:
[drm:hsw_unclaimed_reg_detect.isra.11 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.
If this message shows up the computer freezes right after loading the SDDM, then if I press caps lock it switches the LED, but if I press Ctrl+F1,F2,F3... it frozes completely.
The strange thing is that if this message doesn't appear all works fine.
Can somebody help me to solve this strange issue?
I can't post a dmesg when it gives the error but there it is a dmesg after a sucessfull boot:
http://dpaste.com/1BGACTE
EDIT: After installing linux-lts kernel I can boot "normaly", sometimes the error arises but the system continues the boot and doesn't freeze
Last edited by BrunoPT (2015-03-26 02:28:23)MoonSwan wrote:Perhaps the drivers are corrupted? Unistall and re-install the i915 driver?
Just did that, the error continues to appear.
I've also added i915.semaphores=1 to kernel parameters activated early kms of the module i915.
Last edited by BrunoPT (2015-03-26 00:19:10) -
Laptop hangs in iowait: sata_piix problem?
I just got this new laptop, an ASUS A8js, and almost everything in Arch works perfectly on it. However, I cannot transfer my old music, video, and document files en mass onto my new laptop. Any extended hard drive transactions will eventually cause (according to top) my processor to spin in iowait at 90-something percent for the rest of eternity, effectively locking up the entire system. I use the sata_piix driver. I understand that all the ATA drivers have been receiving something of an overhaul, but this laptop is new so I can't speak to whether the old drivers would have worked. Although during extremely heavy transactions (such as `cat /dev/zero >> zero.txt`) my iowait will often spike up above 50, it will eventually spike up to 90 all at once for even light but steady transactional loads, even if the iowait has been near zero the entire time. All of my partitions except boot are on LVM, which I've never had problems with before. My filesystems are all ext3. My home partition is encrypted with dm-crypt and pam_mount, but this problem occurs even if testing my unencrypted root partition. I've tried the standard, beyond, ck, and suspend2 kernels, and compiled a custom version with preemption turned off (I ran across a post somewhere with a vaguely similar problem, where doing so helped). None of these measures helped. I haven't found any errors in my logs from the time of the lock-up, but then nothing can be written to disk with the iowait at 90+. If anyone has experienced a similar problem, I would appreciate any assistance they could offer. Output of lspci -v is below:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9f00000-fdffffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
Capabilities: [88] Subsystem: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe000000-fe0fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
Capabilities: [a0] Power Management version 2
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe100000-fe1fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
Capabilities: [a0] Power Management version 2
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ec00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at e800 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at e480 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: fea00000-feafffff
Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI Bridge
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
Capabilities: [70] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0397 (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 1442
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 1000
Flags: fast devsel, IRQ 16
Memory at fe0ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 11f5
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at c800 [size=256]
Memory at fe1ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe1e0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
06:00.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
06:00.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
06:00.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: bus master, medium devsel, latency 0, IRQ 5
Memory at feaff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
06:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: medium devsel, IRQ 5
Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
06:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Unknown device 1447
Flags: medium devsel, IRQ 5
Memory at feafe800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2newgargamel, is your laptop also using LVM and ext3? Just trying to isolate the issue.
-
Laptop 'hanging' when trying to change background picture
Hi
I've tried to change the background picture under system preferences - desktop/screensavers. When I tried to select a picture from my iphoto-folders the system hung and won't come back at all until I shot it down with the on/off button. I wasn't even able to do a forced quit...
Did somebody encounter this as well?
It actually worked fine again after a restart, but still I think this a strange behaviour.
Mac Book Pro Mac OS X (10.4.7)If I can jump in here, Jason is asking about background applications of which there are several always running. You can check this by opening Activity Monitor (in Applications> Utilities).
Changing pictures is affected by a number of other applications, including (oddly) the Dock.
When you selected the picture, was it in one of the Original or Modified folders? Try copying the picture and moving it to a separate folder in the Pictures folder and selecting it again. -
Hp pavilion g6 notebook pc. when i am watching videos my laptop hanged with hy pitch of noice.
its brand new i baught 3weeks b4 now its saying error "WINDOWS MEDIA PLAYER CORRUPED" i dont know wat i will do.
Hi,
It may be worth trying to reset Windows Media Player as follows.
Click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off', open up Media Features and untick Windows Media Player. Click Yes then OK and then restart the notebook.
When Windows has restarted, click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off', open up Media Features and tick Windows Media Player. Click Yes then OK and when WMP has finished installing, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
How to access remote web service?
I try the demo in get start document(chapter 18).but I can not get any data. Do I have to change settings?Do I have to use FDS? Thanks Mark
-
How to set the Context path to AAA/BBB in Weblogic 5.1?
Hi folks, I want to deploy a web application and set the servlet context as: AAA/BBB. Put more simply, my application should be accessible via the following: http:localhost:7001/AAA/BBB/main.jsp where
-
Help with Inventory Program Buttons & images
I'm supposed to have buttons that move between the items in my program individually showing them one by one and also going to the first item when the last one is reached and vice versa, but I cannot get the buttons to to show even show up. I'm also h
-
N80: Problem of no Chinese Language while update t...
Recently i just update my firmware to:- V 4.0623.0.41. 26-07-2006 RM-92 Nokia N80 (11) But it's can't support any chinese language. There are France etc language which i can't understand. How do i get the firmware which support chinese and english la
-
Communicating with Serial Port
Hi, Hi I have an application that i have to communicate with serial port... Its working perfectly if am giving all the com settings as constants(pls hav a look @ codea). But i want to read the port number and baud reate from text file.When i changed