Frequent Mouse-Down Errors
I'm experiencing frequent (every 11 minutes or so) mouse-down errors. As this occurs in any variety of apps, including the Finder, the application in-use seems to not be a factor.
I will be using an application and suddenly the track-pad no longer works. This is will last for between one and three minutes. Sometimes, the front-most window will veer suddenly to the left so that it is halfway off the screen. I will be unable to move it until the mouse-down error ends. Most of the time, I can continue to move the mouse around during these events, but I can't click on or move anything. Sometimes, gestures (like 4 finger push up to reveal Mission Control) will be disabled during these events, but not always. During these events, I am also unable to drag and drop any files from one space to another.
This is extremely frustrating and very disruptive to my work and I would really appreciate any help in resolving this.
The problem began a week or so ago after I installed more than a dozen applications; I have experimented with quitting one menulet at a time with no results. It seems to me, since the error is occurring on a fairly regular basis that one background process or another is causing it so the offending app would need to be fully uninstalled, not just quit anyway.
I'm wondering, at this point, if I should just restore from a two week old backup, but I would really like to avoid that hassle if it's possible to simple identify the offending process.
These are some of the console logs of mouse-downs:
This is the most recent EtreCheck report:
EtreCheck version: 1.9.15 (52)
Report generated 23, August, 2014 11:45:28 AM EDT
Hardware Information: ?
Mac mini Server (Late 2012) (Verified)
Mac mini - model: Macmini6,2
1 2.6 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: 768 MB
E2350 1920 x 1080 @ 60 Hz
System Software: ?
OS X 10.8.5 (12F45) - Uptime: 1 day 13:45:29
Disk Information: ?
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
⨀ (disk0s2) / [Startup]: 250.14 GB (72.26 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
APPLE SSD SM256E disk1 : (251 GB)
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted>: 209.7 MB
☾ (disk1s2) /Volumes/☾: 250.66 GB (250.34 GB free)
USB Information: ?
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1144 4 TB
S.M.A.R.T. Status: Verified
disk7s1 (disk7s1) <not mounted>: 209.7 MB
⠍⠑⠙⠊⠁∞ (disk7s2) /Volumes/⠍⠑⠙⠊⠁∞: 4 TB (695.3 GB free)
Western Digital My Book 1144 4 TB
S.M.A.R.T. Status: Verified
disk6s1 (disk6s1) <not mounted>: 209.7 MB
⠍⠑⠙⠊⠁ (disk6s2) /Volumes/⠍⠑⠙⠊⠁: 4 TB (1.17 TB free)
Western Digital My Book 1144 2 TB
S.M.A.R.T. Status: Verified
disk5s1 (disk5s1) <not mounted>: 209.7 MB
♾ ∞ (disk5s2) /Volumes/♾ ∞: 2 TB (823.76 GB free)
Western Digital My Book 1144 2 TB
S.M.A.R.T. Status: Verified
disk4s1 (disk4s1) <not mounted>: 209.7 MB
♾ (disk4s2) /Volumes/♾: 2 TB (826.78 GB free)
VIA Labs, Inc. USB3.0 Hub
Wacom Co.,Ltd. Intuos5 touch L
Audioengine Audioengine 2+
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Firewire Information: ?
LaCie Group SA LaCie DVD MULTI Drive 400mbit - 400mbit max
WD My Book 111D 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk3s1 (disk3s1) <not mounted>: 209.7 MB
⨀ ☾ ∞ (disk3s2) /Volumes/⨀ ☾ ∞: 999.83 GB (310.49 GB free)
WD My Book 111D 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted>: 32 KB
Djuna (disk2s3) /Volumes/Djuna: 2 TB (467.22 GB free)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Configuration files: ?
/etc/hosts - Count: 21
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) Support
[loaded] com.cleancutcode.displaypaddriver (14 - SDK 10.7) Support
[loaded] com.cleancutcode.displaypadframebuffer (14 - SDK 10.7) Support
[loaded] com.dvdfab.kext.fabio (1) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[loaded] com.makemkv.kext.daspi (1) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.6 - SDK 10.8) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
Startup Items: ?
ProTec6b: Path: /Library/StartupItems/ProTec6b
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.bombich.ccc.scheduledtask.17F56F48-3C2C-4D3B-B47E-205306ACCFDB.plist Support
[not loaded] com.bombich.ccc.scheduledtask.2D2A146C-2C9A-49C3-AB42-CC8739EB950B.plist Support
[not loaded] com.bombich.ccc.scheduledtask.5E0B2858-77D7-4B7F-9CFF-200039E53FA9.plist Support
[running] com.bombich.ccc.scheduledtask.5FDB8E27-273B-485D-AC72-217F3FD8119B.plist Support
[running] com.bombich.ccc.scheduledtask.65FB7ACA-8A91-47EC-AC2F-348EE1CE3AC4.plist Support
[running] com.bombich.ccc.scheduledtask.D8145D25-190A-44BF-BB03-CF94E6D9ADD7.plist Support
[loaded] com.cyberghostsrl.CyberghostPrivilegedHelper.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.github.GitHub.GHInstallCLI.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.informer.mac.daemon.plist Support
[loaded] com.JWVD.cbcache.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.robohippo.HippoConnectDaemon.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.wdc.WDDMservice.plist Support
[running] com.wdc.WDSmartWareServer.plist Support
[loaded] net.interacto.flavours.helper.plist Support
[running] org.glimmerblocker.proxy.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
[not loaded] org.virtualbox.startup.plist Support
[loaded] org.wireshark.ChmodBPF.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.robohippo.HippoConnectAgent.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[running] com.wacom.wacomtablet.plist Support
[failed] net.culater.SIMBL.Agent.plist Support
[loaded] org.glimmerblocker.updater.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.adobe.ARM.[...].plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[running] com.bombich.ccc-user-agent.plist Support
[running] com.nchsoftware.expressinvoice.agent.plist Support
[running] com.nchsoftware.inventoria.agent.plist Support
[loaded] com.nchsoftware.switch.schedule.LikeSurvey.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[loaded] uk.co.markallan.clamxav.clamscan.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ?
CheatSheet
handyPrintDaemon
iTunesHelper
iTunes
Degrees
Calendar
Wunderlist
Mint QuickView
Mail Call
Plex Media Server
Dropbox
DeskConnect
CloudClip Manager
Converto
Brightness Slider
ByteController
Moom
App for Facebook
Cobook
Numi 2
SnappyApp
TotalFinder
XtraFinder
Internet Plug-ins: ?
DirectorShockwave: Version: 12.0.5r146 - SDK 10.6 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
OVSHelper: Version: 1.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.1
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
Safari Extensions: ?
myPlex Queue-2
AdBlock
DuckDuckGo
Save to Pocket
LinkThing
Deanimator
Harakirimail
dotepub
ClickToFlash
JavaScript Blocker-2 (Disabled)
FeedButton
1Password
Audio Plug-ins: ?
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
InstantOn: Version: 8.0.0 - SDK 10.8 Support
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
RealPlayer Plugin: Version: Unknown
3rd Party Preference Panes: ?
Flash Player Support
GlimmerBlocker Support
handyPrint Support
Java Support
MenuMeters Support
Perian Support
Shades Preferences Support
SwitchResX Support
WacomTablet Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
⨀: Disk size: 232.96 GB Disk used: 165.67 GB
☾: Disk size: 233.44 GB Disk used: 298 MB
Destinations:
Ectoplasm [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 77
Oldest backup: 2013-12-21 04:36:50 +0000
Last backup: 2014-08-23 15:01:44 +0000
Size of backup disk: Adequate
Backup size 931.16 GB > (Disk used 165.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
11% firefox
2% WindowServer
1% Dropbox
1% Console
1% plugin-container
Top Processes by Memory: ?
1.76 GB firefox
1.70 GB com.apple.automator.xpc.workflowServiceRunner
393 MB mds
262 MB iTunes
213 MB installd
Virtual Memory Information: ?
3.03 GB Free RAM
6.08 GB Active RAM
4.47 GB Inactive RAM
2.41 GB Wired RAM
1.56 GB Page-ins
0 B Page-outs
Again, I would really appreciate any suggestions or questions you can throw at me.
Thank you
Try un-installing SIMBL. It is a system hack.
SIMBL Uninstall
SIMBL Uninstall (2) See solution posted by Linc Davis .
Try un-installing the applications you installed. Un-install using the developer’s instructions to make sure you remove all parts of the application. Some people recommend not installing an application unless you know how to remove it. When you find the problem application, you can try re-installing the others.
Similar Messages
-
Database Frequently shutting down
Database is running in NoArchivelog Mode on Windows Server.
Database was frequently shutting down automatically.
How to overcome the below error.
When I try to open the database I am encountering the below error
Errors in file d:\oracle\admin\gentools\udump\gentools_ora_7840.trc:
ORA-01110: data file 2: 'D:\ORACLE\ORADATA\GENTOOLS\UNDOTBS01.DBF'
ORA-01114: IO error writing block to file 2 (block # 1)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.Database is running in noarchivelog mode, How do i recover
In udump the below file containts:
Dump file d:\oracle\admin\gentools\udump\gentools_ora_7840.trc
Mon Jan 22 16:02:53 2007
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.2 , CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Windows 2000 Version 5.2 , CPU type 586
Instance name: gentools
Redo thread mounted by this instance: 1
Oracle process number: 12
Windows thread id: 7840, image: ORACLE.EXE
*** SESSION ID:(9.3) 2007-01-22 16:02:53.343
ORA-01110: data file 2: 'D:\ORACLE\ORADATA\GENTOOLS\UNDOTBS01.DBF'
ORA-01114: IO error writing block to file 2 (block # 1)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process. -
Mouse down event reading a string terminal trick
Hi,
I wondered why I was getting frustrated entering a pasword that was verified in the mouse down event of the OK button. This is becuase when you click the OK button the entered text is still in the buffer and not copied to the terminal. (Which is more natural than clicking somewhere on the FP first). Note pressing enter or tab gets the string control out of enter text mode.
Turns out need update value while typing turned on if you want to gaurantee a correct read of a text input control in a mouse down event. As this is one of those not obvious but sometimes happens bugs... I have posted for reference for others :-)
Example attached v8.6.1.
Attachments:
TestMouseDownEvent.vi 13 KBNick wrote:
Turns out need update value while typing turned on if you want to gaurantee a correct read of a text input control in a mouse down event.
AFAIK, "Update value while typing" will trigger only a Value Change event of the Str Ctl.
Mouse Down event will preceed a Value Change event, if you have both the event cases configured in your code.
- Partha
LabVIEW - Wires that catch bugs! -
Battery doesn't charge AND frequent shut down when only on AC power
Hello all,
I've spent some time browsing and searching this forum to avoid asking a question that has already been answered but I haven't seen a complete answer to this situation so here goes.
I have a Lenovo 3000 N100 model 0768DKU. Battery (P/N 92P1185) started not charging/not holding a change about 6-8 months ago AND the laptop now abruptly shuts down even when on AC power. From the forum I found out about the 18 month battery replacement policy but I'm just a few months past the 18 months so out of luck there. Normally I would just buy a new battery but the last few months I've been getting very frequent shut downs when the laptop is exclusively on AC power even with the battery removed! This has kept me from buying a battery because the laptop won't stay on even when it's plugged into the wall then how will a battery help?
This has really thrown me for a loop since the laptop may run 30 minutes then it's dead like you pulled the power cord. Turn it back on maybe 10 minutes then dead, or 5 minutes then dead repeat over and over.
Steps I've taken since browsing the forums:
Virus scans/spyware are clean
Used compressed air on the fan vent to remove a little dust, opened up and sprayed out dust nothing major.
Speedfan is reporting cpu temperatures of 65C to 69C at 99% idle.
Reseated memory
Questions:
Would a new battery potentially solve this problem? I'm not sure how since it shuts down even with the battery removed and only the power cord plugged in.
Bad AC adapter?
Thermal problem? It looks like the cpu is still below temperature ranges based on Intel but it sure seem like a thermal problem to me the way it shuts down. I'm trying some new thermal grease tonight but not sure if that will realy make a difference.
Any suggestions, I'd hate for it to be motherboard, etc.
Sorry if this was answered elsewhere I've seen all the battery posts but not how the battery would address the fact the laptop shuts down even when on AC power with or without the battery installed.
Thanks,
ChadHard reset didn't work for me either, thanks for the tip it was worth a shot.
Thermal paste kept temps lower around 45C still suddenly shut off like usual while on AC power. 3, 5, minutes, etc. Doesn't appear to be thermal.
Could the "bad" battery somehow be messing up the power circuit and cutting off. Looks like the battery problem with these units is huge wish I'd been looking earlier since I was within the extended 18 month period at the time. Just want to hear that someone bought a battery and it fixed the problem.... -
How do I place an image and insert a different photo for the "mouse down" state?
I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
How do I place and image and have a different image for the mouse down state?Hello,
This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin -
Mouse down event handling of table control in subvi
Hello Everyone.......
I have created a vi which has a table control and xy graph... the function of the vi is to plot the data of two particular column of table into xy-graph after user selects the data from table.... In this vi , I have used mouse down event for selecting data set so that the color of selected row get changed for user reference....... the vi is working fine.....
My problem is that this vi is a part of main vi.. and I want to use this vi as a subvi.... So, in my main vi I have a table control which is connected as input to the subvi... I come to know that I need to register event for triggering a event in a subvi.......
(1) How to register Mouse down event of table control which is on Main Vi to trigger mouse down event of table in subvi.... Another Important thing is... how to link every property of table control of subvi to the table control of main vi... so it just act as single control adapting every property like when user selects a particular row its color changes in subvi....so it should be reflected even if user selects a row in main vi... I mean table control of main vi and subvi should be a single control...is it possible?
I hope I am clear......Thanks ..See the modified version of the VI. I use the 'Point to Row Column' method to get the cell that was clicked on - your method also worked using 'Selection Start' but I thought I'd show you an alternative.
I've used a single event structure to update two table controls - the point is that if you have the references to the controls you can update the control from anywhere. You can also 'register for events' to allow you to register for events from a different VI (again, using the references) that doesn't have the control on the front panel.
Couple of things about your VI:
You don't need to put a wait node if you have a timeout on your event structure.
You don't need the for loop for the columns/rows - if you look at the help for the 'Active Cell' property you can use a value of -2 for the row/column to select all cells in the row/column.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Attachments:
Highlight Selected Row in Table Control_lv2009.vi 13 KB -
Hi,
If I use the the Event "Array" Mouse Down, Is there any way to know which element in the array was clicked???
Thanks.
Raymundo Cassani
Solved!
Go to Solution.
Attachments:
imagen.JPG 51 KB
imagen.JPG 51 KBIn the LAVA Code repository there is a piece of code that check that for you, it takes the current index position into account, size of the eleements.
Unfortunatly the website is currently down. Let me check later.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
Detect mouse down or click outside
Hello,
I'm trying to detect Mouse Down or Click event outside of a TextInput element.
This doesn't work:
myInput.addEventListener(FlexMouseEvent.MOUSE_DOWN_OUTSIDE,aHorseWalksIntoABarAndTheBarten derAsksHeyWhyTheLongFace);Hm... It's a custom TextInput component, I need to listen to this from inside it.
How does DateField or DropDownList do this? They close the DateChooser and List when clicking outside.
I saw something to do with mx_internal, but I'm not sure if I should be using that. -
PDA Mouse Down Event on Picture Control
While using the Mouse Down Event on the Picture Control for LabVIEW 7.1 PocketPC PDA, I want to get the xy coordinates on where the user tapped on the pict control. Any ideas or workarounds?
RobertHello Robert �
What do you mean by �outputting individual horizontal and vertical components�?
In the LabVIEW PDA module (and this applies to PocketPC and PalmOS), clusters will not show up in the PDA�s screen. You can use clusters to group controls/indicators but when there is need of sending a new value/showing the value in the screen, the bundle and unbundled functions have to be used, so that you can have individual controls/indicators to pass a new value/see the value, respectively.
So, from the Coords terminal in a Mouse Down/Up event, you need to unbundle the cluster and create individual indicators for each, the horizontal and vertical position.
I am attaching an example to show you what I mean. For PalmOS, the same applies.
H
ope this helps and if I misunderstood your post, please let me know.
Have a great day.
S Vences
Applications Engineer
National Instruments
Attachments:
PPC_Picture_Events.vi 30 KB -
FREQUENT FAILURES AND ERRORS:PLZ
can any one send some frequent failures and errors.with sol if possible.
Prasanth
Check these weblogs. Hope these helps.
Thnaks
Sat
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Re: dataloading problems from r/3 ? -
Im trying to create a program so that when the next button is pressed, the gui then reads the next line on my excel sheet for the standard. Im having trouble with the mouse my down functioin for this.
Attachments:
Intensity4.vi 181 KBPlease show us where excel and file IO happens. I cannot find it.
Your VI is full of race conditions and very convoluted code.
To get one row of a 2D array, reshaping it to a 1D array with the lenght of one row seems pointless. All you need is "index array" with one index disconnected.
You have a case structure with the same property nodes in all case frames, thus they belong after the case, only on instance needed each.
There are plenty of potential race conditions. For example the boolean "standard" is read (via value property) and written in parallel elsewhere to the terminal.
How do you know what happens first?
Getting a scalar from an array does not need a detour via dynamic data ("Numeric", after the small FOR loop). try
index array"
In the "next: mouse down" event, all you need in the second frame is the "menu" local variable. wire it to the output if the +1 from the previous frame.
LabVIEW Champion . Do more with less code and in less time . -
Is there anyway I can keep the control properties as shown in the image attached if I add another event to the same event structure case?
I currently have an event structure case configured to execute on a mousedown event on a multi column listbox and would like to add a dynamic event to this case also yet keeping hold on the properties show in the image attached..
Strokes
Solved!
Go to Solution.
Attachments:
Mouse down event for Multi Column Listbox.PNG 2 KBsebster wrote:
Is it not just a case (pun not intended) of right-clicking the event structure and selecting Show Dynamic Event Terminals?
I understand how to create, register and generate dynamic events but when I add the dynamic event to the event structure it changes (naturally enough) the "CtlRef, Coords,Button" properties to other ones like "time, type, source" etc... -
I have been having a hard time figuring out where to fix this mouse down problem. On this new site magbacker.com, when you click the left navigation text the text gets smaller. I have a separate css style sheet called "sprymenubarvertical2.css" and a overall site css style sheet called "magbacker.css". I also have a few internal css styles on each page for specail design elements. The font size of the left navigation is 17px and on some of the pages it goes smaller when you click or mouse down on the text. Some page it stays the same which is what I want. I don't want the text to change when clicking it or doing a mouse down. I can post the css code here if necessary but you savy css coders should be able to see it based on veiwing the source code on the site.
I'm working on the site as you read this due to a tight deadline so some things maybe changed.
Any help on this seemingly simple fix would be most apprecaited.
http://magbacker.com
Thanks,
JayIn each page you have embedded styles. Change this -
a:active {
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #00F;
to this -
a:active {
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
color: #00F;
By the way, while browsing to one of those pages, increase the text size in your browser a few times and you'll see why we plead with people NOT to use absolute positioning as a layout tool. -
Mouse Down and Mouse Move and scroll ?
Hi,
Here is what I want to do:
Whenever a user presses the mouse down and the moves the mouse, I want to synchronize the scrollbar thumb and the mouse. How is it possible?
thanks.hi,
there are 2 ways to do this depending on what you need from the mouse move
1. To get the difference from when the mouse is pressed
on the mousedown event your store the mouse coordinates -
myX= stageX or LocalX myY= stageY or LocalY
on the mousemove event you subtract the current co-ordinates from the saved cordinates
myXDif = myX-currentX
myYDif = myY-currentY
the difference will be negative or positive you can use that figure to calculate the percentage of range and then set the scrollposition
2. Just track the mouse
on the mouse move calculate the percentage position of the mouse to set the scrollbars
HorizontalScrollPostion= the Max horizontal value * (LocalX /Width)
VerticalScrollPosition= the max vertical value * (LocalY/Height)
David -
Mouse down? filter no funciona correctamente
Tengo una estructura de eventos, en esta está un filtro de mouse down?, tengo un string control en el panel. Cuando esta activada la propiedad key focus del string control, quiero filtrar todos los click en la vi, el problema es cuando se le da click a alguna casilla de texto como un indicador, array etc. Antes de ejecutar el filtro primero le quita el key focus del string control luego genera el evento del filtro, por lo que no puedo filtrar ese click. Anexo una vi demostrando el problema.
O en su defecto como puedo mantener siempre el key focus de una string control hasta que presione una tecla? Sin importar lo que se haga en la pantalla (filtrar absolutamente todos los click para que otras aplicaciones de Windows cambios de ventanas etc. no interfieran en esta vi)
Gracias y espero su respuesta
Solved!
Go to Solution.
Attachments:
MouseDown.vi 15 KBLo que necesito es filtrar los mouse down que se hagan en la vi mientras se tiene el key focus=true en el string control, para que no se pierda y se genere un evento de value change. la f solo es para salir de la string control.
En pocas palabras que cuando se presione el mouse en cualquier parte de mi vi siga seleccionado el string control.
Si te fijas en la vi de ejemplo cuando se introducen valores en el string control y luego das un click en cualquier parte de la pantalla que no sea otra casilla de texto, el click del mouse se filtra y no genera ningún evento de value change, pero cuando le das un click a alguna casilla de texto como la del array o el indicador, el string control deja de estar seleccionado y genera un evento de value change. Esto pasa porque antes de filtrar el click con el evento mouse down? primero quita el key focus del string control, luego genera el evento de mouse down?.
Modifique un poco la vi para demostrar un poco mejor el problema, le agregue que todos los click del mouse se filtren, y que inicie con el key focus en true del string control, pero aun así si dan clck una casilla de texto se pierde el key focus del string control y si se cambiaron los valores del string control se genera un evento de value change.
Attachments:
MouseDown.vi 16 KB
Maybe you are looking for
-
In the slide show timeline, how do I select a photo to crop?
In the slide show timeline, how do I select a photo to crop? Sometimes it lets me do it and sometimes I can't select the photo to do it. I'm not sure why the difference.
-
Change default language for the logon Page
Hello, On a SAP Portal 7.0 SP 17 I've a problem with the language of the Logon Page: is always in English. If I go to internet explorer -> tools -> internet options -> languages I've set Franch as language. When I open the Logon Page (http://xxxx:501
-
Hi All, please find the code below I'm calling this code throught form when button pressed trigger. i have not given any commit any where in form or script below. But it is getting updated in MTL_SYSTEM_ITEMS_B table. which actually should not happen
-
Hello, I configured some J2EE Adapters and sometimes it occures that a adapter is hanging and has to be restarted. My question is: It is possible to restart a J2EE adapter like in the J2SE adapter engine? Thanks in advance and best regards, Falk
-
I have a relative that keeps sending me pictures with her texts. I was wondering if there is a way to remove the pictures from the phone, but still save the conversation.