Frequent "No disk in the drive" error message
I get it even if I'm not trying to write to a disk and even if a disk is in the drive. Also when I leave Encore to go into another program and when I come back in. It's a Windows message, but it only appears connected with Encore. Can I get it to stop?
This definitely sounds like some form of Auto Insert Notification here.
What other Burn apps are installed, please?
Similar Messages
-
No Disk in the Drive Error When I open iTunes
When I open iTunes I get the error No Disk in the Drive. I can click on Cancel several times and iTunes will open, but this is very annoying.
Has anyone had this problem, and fixed it?I am having a similar problem, but it has nothing to do with a card. I installed my iTunes successfully about five months ago and everything was fine. Then, at some point, I started getting that same error, which I just skip over about twenty times before it works. Some strange things did occur after this...
1) I had a number of files that were saved in one of iTunes folder that suddenly were "erased". These songs areon my iPod but are not available in my libarary.
2) Some songs that I have downloaded using LimeWire, and are in a separate shared folder are intermittantly showing up with an ! in my library, saying the file can't be found. I'll locate it with the prompt, and the ! will disappear...only to appear with a later launch. This will happen to different songs at different times with each launch, but from within that folder.
Any help out there? I'm tempted to uninstall the whole shebang and reinstall all over again. -
"No disk in the drive" error when iTunes attempts to sync
When I connect my iPod to Windows XP, it syncs initially. Once the update is completed, the iPod screen returns to normal and all is well...until I attempt to update the iPod again.
It gives me this error:
<"
Yes, there is a space between "drive" and the period. It seems like Windows is not liking USB devices that keep disconnecting and reconnecting. Does anyone know of any fix to this? This isn't specific to my iPod. It has also spread to my Palm.
Thanks!I'm having the same problem. And once that shows on the screen, the continue, retry and cancel button won't go away. I'm having to use Task Manager to restart my PC at that point. This happens everytime I plug in my iPod, whether using firewire or USB 2.0
Upgraded to iTunes 5.0 and problem still exists.
Hope Apple can address and post a fix! -
"No disk in the drive" error pop up
I'm running PSE8, and have used it for years with no issues...until last week. Now, during start up, I get the popup shown below. I have to click "continue" 3 or 4 times repeatedly before it goes away and loading continues. Then, while editing a photo, it pops back up several more times...anytime I want to save a photo or click to another window then return...and each time I have to click "continue" anywhere for 4 to 7 times to get past it.
Any idea how to make it stop? I don't even think that's a valid location in my computer...Are you using any third party applications to access/manage your iPod. I know that Red Chair Anapod causes this conflict with iTunes and I'm sure that other applications do to. Try uninstalling iTunes and then reinstalling the latest version.
Rick -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
Error Message When Syncing Ipod "There is no disk in the drive ... "
When doing a search on the internet for this error message, i see a few other previous posts on forums.ilounge.com with others having this issue with Itunes, but all I can find is someone talking about deleting the Itunes preferences files on my computer, and I did that, but that didn't help. I was wondering if anyone had any bright ideas.
I get this annoying message EVERYTIME I sync my Ipod:
"There is no disk in the drive. Please insert a disk into drive G:".
(Drive G on my computer is my Ipod when i have it plugged in). It doesn't seem to interfere with anything; all I have to do is click continue and the message goes away. But as I said, it's annoying, and I want it gone. I want to avoid reinstalling Itunes if I can due to the hassle of having to do so, plus previous posters on forums.ilounge.com said they did so an it didn't help. If someone can direct me to a previous string where this has already been discussed please post me the link. thanks!Hi there
I am also getting this error message. One day my iPod was syncing fine, the next I was getting this error message. I have tried every conceivable drive letter, and still I get the message. i have also tried every drive on my computer, still the same message.
I have restarted and restored the iPod several times, no change to error message.
I shelled out £16.99 on a new sync cable, thinking that might help - but no, i still get the same error message.
In addition, my iPod screen displays the DO NOT DISCONNECT sign.
I seem to be able to perform a sync, but at the end, when iTunes says sync complete, the error message appears on my screen (incidentaly the header bar of the error message says: CorelLOMonitor.exe - No Disk) and the iPod screen continues to flash "Do Not Disconnect". This continues indefinatly and I have only been able to stop it by unplugging the iPod form the Sync cable.
I really would welcome some assistance with this problem.
Many thanks -
I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1
It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
If you meant Adobe Photoshop Elements, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.
Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again. -
While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700: Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700: 2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 1
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage”
2012-09-10 11:20:51 -0700: Size : 1.5 TB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700: Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 2
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700: Size : 500.05 GB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with thisI have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700: Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700: 2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 1
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage”
2012-09-10 11:20:51 -0700: Size : 1.5 TB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700: Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 2
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700: Size : 500.05 GB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this -
Error Message: there is no disk in the drive
When performing file operations, such as duplicating or moving an image, I get the following error message:
If I click "continue," the operation completes, but it is very annoying. I have no drive by this name as far as I know, so how can I stop getting this message?
Thanks.is this path shown in the destination drive box ?
-
Error Msg - There is no disk in the drive. Please insert a disk into drive
Okay, I have been using itunes w/the same ipod for quite a while. Recently my computer died so I just bought a new one. Before getting rid of the old one I logged onto windows and moved all my files to an external drive. I am now using this external drive for all my docs, music, etc. on the new computer and did a "move" of "my documents" (including "my music" contained therein). I installed itunes and my ipod using the software disks that came with my ipod. I inserted the ipod and it worked fine but it did make me associate the ipod with this new computer and had to reinstall all my music on my ipod. So far so good. Then when I went to play a purchased song itunes informed me that I had to upgrade to the most recent version of itunes to play the song. I then dowloaded the update and installed it. After installing the updated itunes, itunes then basically re-associated itself with my ORIGINAL profile (I'm not sure if profile is the correct word to use here) and once again deleted everything on my ipod and reinstalled all my songs. Now this is where I began having this problem. Now, everytime I run itunes (with or without my ipod connected) I get 12 of the above-mentioned error messages. The top of the box says "Windows - No Disk" and the main part of the box says "There is no disk in the drive. Please insert a disk into drive." I am given the choice of "Cancel" "Try Again" and "Continue." I hit cancel for a total of 12 times. I've tried with disks in both of my cd/dvd drives and get the same message. The funny thing is that I have about 12 or so card readers (scene by the computer as drives) and I'm thinking that maybe itunes is trying to access those drives or something, but I'm not sure. So, that's it in a nutshell. Any help by someone w/knowledge of this issue would be greatly appreciated. Thanks.
This can also be caused in iTunes 7 by "dead tracks": songs that iTunes is expecting to find in a certain place but the song file isn't there.
I recently upgraded to version 7 and got this message every time I started iTunes. I used the iTunes COM SDK for Windows with JScript to find all the dead tracks in my library. Then I fixed them by either deleting them from the library or else correcting the library's idea of where the song file was. Once I did this the message went away.
Another way to look for dead tracks is to parse the iTunes library XML file and look for invalid file paths. I did this in Perl without too much trouble.
(I'm cross-posting this to several threads about the same problem.) -
When I am using Premiere Elements 13 I get a message that pops up "There is no disk in the drive" I click on it and it keeps coming back "very annoying", but about three months ago it happened to me and I was told to change the file name from OldFilm.AEX to OldFilm.AEXold. Well now the file is back in Folder OldFilm.AEX. Here is a screen shot the files are highlighted.What should I do now to correct this once and for all, or can I? Thank you for your time.
TomWolves
I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
release early in February 2015.
2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
Bottom line: let us try the deletion or disabling one more time and see what happens.
Looking forward to further reports on your findings, as your time permits.
Thanks.
ATR -
Windows Error Msg when using Itunes - "There is no disk in the drive. "
Hi there -
Desperately seeking help before I lose my mind !
Whenever I try to do anything in iTunes I get the Windows windows error message "WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ." with the options to either CANCEL, TRY AGAIN or CONTINUE.
Regardless of which of the options I select, the error message re-appears & will not close.
I try CTRLALTDEL but I get the message Itunes is "not responding".
I have tried:
- Updating iTunes software
- Making sure I have the latest Windows Updates
- Uninstalling and reinstalling iTunes
- Selective start-up where I disable all applications which might be clashing with iTunes
- clearing the menu in QuickTime
None of these work
Any ideas ?
Thanks -
HP Pavillion Windows XPI am wondering if you ever got this problem straightened out, or if anyone else knows the solution to this problem. I am receiving the exact same message as you talk about receiving here:
"WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ."
No drive is listed, just a "."
I also have tried uninstalling and resinstalling iTunes many times. Not only that, but I thought it might be a virus problem of some kind, so I totally resintalled my Windows XP system. All to no avail. Even on my newly installed system I am having this problem in iTunes.
I have found that if I hit Cancel about 80 times (literally), iTunes will finally load. But it is crazy that anyone should have to go throug this each time he loads the iTunes program.
Someone posted a link to a Microsoft fix for a similar problem, but I was unable to understand the fix, and the problem listed in the fix did not seem to correspond with the problem we're having.
If anyone knows the solution to this problem and is able to give instructions for the solution, I would really appreciate it! I would just use an alternative mp3 player to iTunes at this point if I could, but that isn't really feasible since I have an iPod. -
Error "there is no disk in the drive..."
I loaded the FlexSQLadmin sample into Builder. When I click
the green "run"button, I get a "Windows - No Disk" popup with the
message "There is no disk in the drive. Plese insert a disk into
drive." Any ideas? I re-installed the builder but still get the
error.Great post Jcat21. My HP has a built-in multi-card reader, I
disabled them, and now it works!
To disable it:
Open Divice Manager
Open "Disk drives" tree node
Right-click on "Generic USB CF Reader" and disable.
Right-click on "Generic USB MS Reader" and disable.
Right-click on "Generic USB CDReader" and disable.
Right-click on "Generic USB SM Reader" and disable.
I am not sure which disabled card reader made it work...I'll
test that next. Also, I'm not sure if it has to do with the
assigned drive letters, but mine were G through K.
Maybe you are looking for
-
Getting the payload from a faulted process
I'm using the fault framework and I need to know how to get the payload from the faulted process. I have a custom java logger that uses the locator API, but I'm finding out that this will only work if the process has been persisted to the dehydration
-
Can I place all my SQL's in one object?
Hi, Is there a way to have a business component object where I can place all my SQL's and call methods off of it. A method that displays that selects all items in an item table Say.. I have a select where the 'where' clause will change upon user choi
-
Hi, I'm Ronald. My mother bought Microsoft Office online on September 28th 2014. She used her e-maill adress ([email protected]) to activate and buy Microsoft Office and this was as well her Microsoft account. Sadly, <sympatico.ca> is a really old e-
-
Error in Configuration Scenario
I am testing a File to File demo scenario. While genearation of the log file I am getting error stating "Error whille creating collaboration objects in configuration scenario..". Can somone help me out.
-
Jar Signing // Missing Digest entries
I have a signed jar's manifest file which does not contain all of the classes ( digest entries) archived in the jar. Shouldn't this be one to one -jar classes to digest entries? Is there a reason why some classes are omitted, whereby others are inclu