Frequent sleep/wake crashes with OS X Mavericks

My mid-2012 MacBook Pro will frequently crash when I open the computer. This has been happening ever since I upgraded to OS X Mavericks, but I have just been dealing with it since then. The final straw was losing an important program I had been working on when I neglected to save before closing my laptop.
The crashes occur seemingly randomly, although they are far more likely to occur if I've left the computer closed for >~15 minutes. An interesting thing about this is my display does not turn off when the computer is closed; I can still see the light from the display if I look through the air vents in the back of the computer.
I have tried resetting my SMC, updating applications, and repairing the disk, but nothing seems to work. I was thinking it might be a problem with display sleep times, but I think there's more to it than that.
I'm including two logs from different times that the crash occurred. I apologize in advanced for all of the unnecessary lines, but at least I shouldn't miss anything this way. I've omitted the domain of the network I'm on, as well as my username, but that's all the editing that has been done.
Log 1:
http://pastebin.com/C6HVjix0
Log 2:
http://pastebin.com/aEzFHS2N
If any more information is required, I'm happy to provide it. If I can't find a solution, I'll just try downgrading to Mountain Lion (Though it is a pain to do so.)

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Air 3.9 Crashes with OS X Mavericks 10.0

Can anyone tell me if Air 3.9 is compatible with OS X Mavericks 10.9? I have two keyword applications that are crashing now that I hve updated. - Rusty

It should be. I run a few AIR apps daily on my 10.9 install and haven't run into a problem. Could you email ([email protected]) me your applications so I can test them out? If you haven't already, I'd also recommend opening a new bug report at bugbase.adobe.com so we can get this formally into our system.
Thanks,
Chris

Sleep/wake Issues With Late 2013 Macbook Pro Retina 13"

Dear Apple Community,
I have been recently having issues with the sleep/wake cycle of my laptop. Every time my laptop goes to sleep and I try to wake it up it gets stuck on a blank screen for 3 mins before returning to normal functionality. I have tried deleting the sleep image files and the laptop functions fine for a day and then back to the same issues. I have 3 sleep image files, 2 of them are 1.07gb each and the other one is 64mg. I have deleted them many times and they just come back with the same issues. Any help here would be appreciated. Thank You

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HDMI Closed Clamshell mode display wake crash with Mavericks.

Hi!
Macbook Pro 2.8 GHz Intel i7, 16GB DDR3 RAM, OS X 10.9.3
So, I am running a macbook pro with an external HD display through the HDMI out on the computer, and the comptuer itself running in closed clamshell mode. Sometimes when the display sleeps I can not wake it up again, to the extent that I have to unplug everything and do a hard reset of my macbook. If music is playing it begins to skip. The display attempts to turn back on but then the screen goes blank. This seems to only happen when the display sleeps, not the computer itself.
I was just wondering if a) Anyone else was having this problem and b) if Apple were aware of it?
I have done my research and I use closed clamshell mode properly (Restart my comptuer when plugging in to the monitor, sleep before disconnecting etc.) and so far I have not lost any data, however I am concerned that having to manually restart my computer 3-4 times a week may at some point severely affect a document I am working on, particularly with Apple's latest software such as Mavericks and Logic X seemingly being so volatile at the moment.
Any help you could provide would be much appreciated!
Thanks!

Hello bambambam8am,
Thanks for using Apple Support Communities.
What troubleshooting have you done so far? Have you reset the SMC and PRAM? If not, follow the articles below for instructions:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Take care,
Alex H.

Macbook sleep wake up with lid closed

Hi everybody. Since 10.9 I had a strange issue with sleep on my MBP 15. If I put it in sleep with the button and I close the lid, it will wake up closed waiting for the password.
Also, if it is in sleep while charging, or charged, and I plug off the magsafe, it will wake up again....even with lid closed.
Already resetted PRAM, SMC, all the basics, any idea?
Thnx in advance

Sleep - Why your Mac might not sleep or stay in sleep mode
Sleep - Won’t

Console logging multiple crashes with name "systemstatsd" (Mavericks)

Ever since installing mavericks on my macbook pro ( mid 2009 ) , system keeps freezing every few minutes ( every 2 minutes ). It stays frozen for about 2 minutes. Doesn't matter what Application I am using ... its the same ( hang after a few minutes ).
I looked at Console app ( it itself has shows as not responding on Activity Monitor when I try to look at the crash reports ). Its been logging multiple crash reports under the name " systemstatsd " .... I have over 50 crash reports by now.
Here is a copy of what is inside those crash reports:
https://docs.google.com/document/d/1zZOHt88SYCtAnxZSn9QLbb9y9Q0OMPU-yI1D1Q4QkAU/ edit?usp=sharing
Here is EtreCheck Output:
https://docs.google.com/document/d/1JwCcLgh4vvun3NjWjh1iXOfNbjL9kJicdjrMLtzjbGs/ edit?usp=sharing
Few more things I tried:
Verify disk (Macintosh HD) --- it failed
Repair disk -- I repaired it after verify disk failed
Problem is still there repairing disk didn't do anything
Please help

Same problem with constant systemstatsd crashes - every 4 mins or so.
Computer is freezing for only a second or two each time.
Clean install of Mavericks 10.9.1 on a mac mini server Macmini4,1
Verify / repair disk revealed no problems.

Sleep wake problems with Yosemite update

I faced a multitude of issues with Yosemite 10.10. Following the 10.10.1 update, some of those were solved, but some still remained, namely those related to the Mail app, where mail server has to be selected manually. However, a new problem has arisen with the update: after going on sleep mode, the system does not wake, and needs to be rebooted. This happens every time, and makes me wonder about Apple's reliability, as it is starting to feel microsoft Vista like. Polishing the looks of the system is fine, bu doing so at the expense of performance, reliability and overall user experience is unacceptable. Looks as if a further update can not come soon enough.

I faced a multitude of issues with Yosemite 10.10. Following the 10.10.1 update, some of those were solved, but some still remained, namely those related to the Mail app, where mail server has to be selected manually. However, a new problem has arisen with the update: after going on sleep mode, the system does not wake, and needs to be rebooted. This happens every time, and makes me wonder about Apple's reliability, as it is starting to feel microsoft Vista like. Polishing the looks of the system is fine, bu doing so at the expense of performance, reliability and overall user experience is unacceptable. Looks as if a further update can not come soon enough.

Sleep/Wake issue with 5K Retina

I Have just purchased an Apple iMac 5K Retina, 4Ghz and 16 GB of RAM. I am experiencing an intermittent warning, which suggests that the system has restarted from Sleep, for some reason. I have contacted Apple Service, who took over the system and gave it a thorough test. After the test and removing an external Disc, the problem seemed to have disappeared. However, this afternoon, it came back again. After closing the warning, the computer seems to operate as expected, with no obvious symptoms. i have originally been told that I can return the iMac if the error re-occurs, which it has. The system is not standard, so I probably would not get a replacement before Christmas, but having spent over £2000 on the equipment, I do not want a flawed product. I will also find the re-instatement to Factory settings a real ' ***'. Any advice from an expert would be much appreciated, before I ring Apple tomorrow. Should I try to return it or is it a trivial issue?

So while still having no solution I've tried several things to solve the problem though:
I've read in some forums that dropbox might have been an issue. Uninstalled it, problem persisted.
I've also unpluged each USB cable one after the other to see if any of the USB devices caused the Problem. No result. My iMac persistantly woke up from sleep even with no USB device connected at all.
Logs show the following on each occasion:
Wake reasion: XHC1 (which apparently is USB)
The USB device BRCM20702 Hub (Port 8 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (3)
The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x14800000) may have caused a wake by issuing a remote wakeup (3)
Systemprofile tells us that:
0x14000000 i couldn't clearly identify but
0x148000000 should be "BRCM20702 Hub
Conclusion:
As no EXTERNAL USB Device caused the iMac to wake up it must either be a driver failure or someting similar within the machine or some bluetooth device. The latter is less likely as it's the third of three wake reason provided by the console.
I do not have any wired keyboard or mouse so I can't verify wether Apples wireless Keyboard & Trackpad could be an issue.

Sleep/wake Problem with 15" MBP

Hey guys,
Just recently, my MacBook Pro has been acting up on me whenever I open it to wake it from sleep. The screen will wake for about 2 seconds and then will go back to sleep. The only way to get the screen back is by hitting the button that lowers the brightness then I have to hit the brightness increase button to get it back to normal which is getting really annoying.
When I put it to sleep with the screen open by hitting the power button, it'll wake up perfectly fine. The problem only occurs when I take it out of sleep by lifting the screen.
Has anyone experienced this before and is it an easy fix?
-Thanks

I just tried unplugging the charger and it comes awake with no issues at all, just comes up black when plugged in and have to use the brightness buttons to wake screen.....hmmmm
Jchaves wrote:
I did a little searching before i posted and it seems like the trouble doesn't have to do with the laptop itself it has to do with some sort of glitch in Lion. The problem only persists when i have it plugged into the charger but when i carry it around and open it from sleep, it wakes up perfectly fine.
Does anyone know of any settings that i can change that can make this problem go away?

Sleep / Wake Issues With Network Drops

I have a Mac Mini connected to the home network via ethernet (NO WiFi At All).
When the Mac Mini does to sleep it no longer appears on the network.
If I open my iMacs Finder it no longer appears in the shared folder.
Wake for network access is checked but it does not seem to happen.
If I go to Go Connect to server via finder and manually enter the address
then it connects and pops up on finder but not on its own. Eventually
when Mac Mini goes to sleep it drops off again.
Anybody else have or heard of this?
Started with Yosemite.

I have a Mac Mini connected to the home network via ethernet (NO WiFi At All).
When the Mac Mini does to sleep it no longer appears on the network.
If I open my iMacs Finder it no longer appears in the shared folder.
Wake for network access is checked but it does not seem to happen.
If I go to Go Connect to server via finder and manually enter the address
then it connects and pops up on finder but not on its own. Eventually
when Mac Mini goes to sleep it drops off again.
Anybody else have or heard of this?
Started with Yosemite.

Sleep/wake problems with j9 PPro10&WM2003

I'm currently developing an app on a pocket PC using WM2003.
My main headache is that if my app is running and the unit goes to sleep, sometimes it won't wake back up.
I can't determine any kind of pattern, it just seems to happen randomly.
I know that's kind of vague, I'm just hoping someone else has run into that problem and knows a workaround.
A more specific question I have is:
Does the J9 fire any events when the unit it's running on "wakes up"? I've tried some of the events available through the AWT, but nothing seems to fire when the unit returns from sleep.
Any pointers would be greatly appreciated.
Doug

I'm currently developing an app on a pocket PC using WM2003.
My main headache is that if my app is running and the unit goes to sleep, sometimes it won't wake back up.
I can't determine any kind of pattern, it just seems to happen randomly.
I know that's kind of vague, I'm just hoping someone else has run into that problem and knows a workaround.
A more specific question I have is:
Does the J9 fire any events when the unit it's running on "wakes up"? I've tried some of the events available through the AWT, but nothing seems to fire when the unit returns from sleep.
Any pointers would be greatly appreciated.
Doug

Microsoft Office Apps Crash with 10.9 Mavericks

How can make it work for office on the new mavericks 10.9? Since i install the latest version i can not work on office.

http://answers.microsoft.com/en-us/mac

Frequent kernel panic/crash with "zalloc: zone map exhausted"

hi,
can anyone please help me track down what's causing my kernel panics? They're happening a few times a day with the same basic structure. The BSD process name varies but has been 'Google Chome Helper' a few times. Most of the other stuff is the same, and it's always something like this at the top;
panic(cpu 2 caller 0xffffff8025a5220d): "zalloc: zone map exhausted while allocating from zone kalloc.8192, likely due to memory leak in zone kalloc.64 (3565775808 total bytes, 55713670 elements allocated)"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:2494
panic(cpu 2 caller 0xffffff802705220d): "zalloc: zone map exhausted while allocating from zone kalloc.64, likely due to memory leak in zone kalloc.64 (3528217728 total bytes, 55128402 elements allocated)"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:2494
cheers,
// greg
Here's a Kernel_xxx.panic log;
Thu Mar 13 11:35:47 2014
panic(cpu 2 caller 0xffffff8025a5220d): "zalloc: zone map exhausted while allocating from zone kalloc.8192, likely due to memory leak in zone kalloc.64 (3565775808 total bytes, 55713670 elements allocated)"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:2494
Backtrace (CPU 2), Frame : Return Address
0xffffff81fe9c3660 : 0xffffff8025a22fa9
0xffffff81fe9c36e0 : 0xffffff8025a5220d
0xffffff81fe9c37e0 : 0xffffff8025a2aa6f
0xffffff81fe9c3810 : 0xffffff8025a13056
0xffffff81fe9c3840 : 0xffffff8025a26b81
0xffffff81fe9c3870 : 0xffffff8025a139f5
0xffffff81fe9c38e0 : 0xffffff8025a26f12
0xffffff81fe9c3910 : 0xffffff8025a5f121
0xffffff81fe9c3950 : 0xffffff8025eb7db8
0xffffff81fe9c3980 : 0xffffff8025eb1e3d
0xffffff81fe9c39e0 : 0xffffff7fa727469a
0xffffff81fe9c3a00 : 0xffffff7fa728741d
0xffffff81fe9c3a30 : 0xffffff7fa7321080
0xffffff81fe9c3a50 : 0xffffff7fa7320fcc
0xffffff81fe9c3a70 : 0xffffff7fa7312c6a
0xffffff81fe9c3a90 : 0xffffff7fa729029c
0xffffff81fe9c3ad0 : 0xffffff7fa7282e32
0xffffff81fe9c3b20 : 0xffffff8025ecd26a
0xffffff81fe9c3b40 : 0xffffff8025ecddce
0xffffff81fe9c3ba0 : 0xffffff8025ecb81f
0xffffff81fe9c3cf0 : 0xffffff8025ab6558
0xffffff81fe9c3e00 : 0xffffff8025a26bf1
0xffffff81fe9c3e30 : 0xffffff8025a139f5
0xffffff81fe9c3ea0 : 0xffffff8025a1e043
0xffffff81fe9c3f20 : 0xffffff8025ac962d
0xffffff81fe9c3fb0 : 0xffffff8025af38f8
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily(98.14)[E354596B-CE66-31A7-B0DC-834008B85FCA]@0xffffff7fa726d000->0xffffff7fa72c5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff7fa60bb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0xffffff7fa6358000
         com.apple.GeForce(8.2.4)[401BA8AE-CD52-3810-A066-4C648B3FC46D]@0xffffff7fa72d2000->0xffffff7fa7360fff
            dependency: com.apple.iokit.IOAcceleratorFamily(98.14)[E354596B-CE66-31A7-B0DC-834008B85FCA]@0xffffff7fa726d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff7fa60bb000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xffffff7fa639b000
            dependency: com.apple.nvidia.driver.NVDAResman(8.2.4)[3D591202-DD24-3441-925A-F6808ABDF185]@0xffffff7fa63ab000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0xffffff7fa6358000
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000025800000
Kernel text base: 0xffffff8025a00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 80737452698220
vm objects:63511168
vm object hash entri:9639440
VM map entries:4980720
pv_list:22032384
vm pages:294359976
kalloc.64:3565775808
kalloc.128:2384637952
kalloc.256:13221888
kalloc.512:8142848
kalloc.1024:7536640
kalloc.2048:2002944
kalloc.4096:5677056
kalloc.8192:6782976
mem_obj_control:3877984
ipc ports:3794400
threads:1684704
x86 fpsave state:1157312
vnodes:63162480
namecache:14076000
HFS node:86102624
HFS fork:31662080
cluster_write:1730792
decmpfs_cnode:2907072
buf.4096:9166848
buf.8192:9740288
ubc_info zone:21491184
vnode pager structur:9635400
Kernel Stacks:2916352
PageTables:119795712
Kalloc.Large:34367304
Backtrace suspected of leaking: (outstanding bytes: 41600)
0xffffff8025a51d13
0xffffff8025a2aa6f
0xffffff8025e83c5f
0xffffff7fa7304061
0xffffff7fa72fd79f
0xffffff7fa7303a4b
0xffffff7fa72e079b
0xffffff7fa72e075f
0xffffff7fa72fe917
0xffffff7fa72db51f
0xffffff7fa72dc0b3
0xffffff7fa72dc926
0xffffff7fa72dd3c4
0xffffff7fa731e9d0
0xffffff7fa731f463
      Kernel Extensions in backtrace:
         com.apple.GeForce(8.2.4)[401BA8AE-CD52-3810-A066-4C648B3FC46D]@0xffffff7fa72d2000->0xffffff7fa7360fff
            dependency: com.apple.iokit.IOAcceleratorFamily(98.14)[E354596B-CE66-31A7-B0DC-834008B85FCA]@0xffffff7fa726d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff7fa60bb000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xffffff7fa639b000
            dependency: com.apple.nvidia.driver.NVDAResman(8.2.4)[3D591202-DD24-3441-925A-F6808ABDF185]@0xffffff7fa63ab000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0xffffff7fa6358000
last loaded kext at 77525008993068: com.apple.driver.AppleIntelMCEReporter     104 (addr 0xffffff7fa7eeb000, size 49152)
last unloaded kext at 77591433738010: com.apple.driver.AppleIntelMCEReporter     104 (addr 0xffffff7fa7eeb000, size 32768)
loaded kexts:
com.apple.filesystems.afpfs     11.1
com.apple.nke.asp-tcp     8.0.1
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.iokit.IOBluetoothSerialManager     4.2.3f10
com.apple.filesystems.autofs     3.0
com.apple.driver.AudioAUUC     1.60
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AppleMikeyDriver     2.6.0f1
com.apple.driver.AppleHDA     2.6.0f1
com.apple.driver.ApplePlatformEnabler     2.0.9d1
com.apple.driver.AGPM     100.14.15
com.apple.driver.X86PlatformShim     1.0.0
com.apple.driver.AppleUpstreamUserClient     3.5.13
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.GeForce     8.2.4
com.apple.driver.AppleIntelHD4000Graphics     8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.2.3f10
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleUSBDisplays     360.8.14
com.apple.driver.AppleSMCPDRC     1.0.0
com.apple.driver.AppleLPC     1.7.0
com.apple.driver.AppleHWAccess     1
com.apple.driver.AppleIntelFramebufferCapri     8.2.4
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleThunderboltIP     1.1.2
com.apple.driver.AppleMuxControl     3.4.35
com.apple.driver.AppleMCCSControl     1.1.12
com.apple.iokit.SCSITaskUserClient     3.6.6
com.apple.driver.AppleUSBODD     3.4.1
com.apple.driver.AppleUSBTCButtons     240.2
com.apple.driver.AppleUSBTCKeyboard     240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     35
com.apple.driver.AppleFWOHCI     4.9.9
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCIBlockStorage     2.5.1
com.apple.driver.AppleSDXC     1.5.2
com.apple.iokit.AppleBCM5701Ethernet     3.8.1b2
com.apple.driver.AppleUSBHub     666.4.0
com.apple.driver.AirPort.Brcm4331     700.20.22
com.apple.driver.AppleAHCIPort     3.0.0
com.apple.driver.AppleUSBEHCI     660.4.0
com.apple.driver.AppleUSBXHCI     670.4.0
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleACPIButtons     2.0
com.apple.driver.AppleRTC     2.0
com.apple.driver.AppleHPET     1.8
com.apple.driver.AppleSMBIOS     2.1
com.apple.driver.AppleACPIEC     2.0
com.apple.driver.AppleAPIC     1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     216.0.0
com.apple.nke.applicationfirewall     153
com.apple.security.quarantine     3
com.apple.driver.AppleIntelCPUPowerManagement     216.0.0
com.apple.security.SecureRemotePassword     1.0
com.apple.iokit.IOSerialFamily     10.0.7
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.6.0f1
com.apple.vecLib.kext     1.0.0
com.apple.iokit.IOAcceleratorFamily     98.14
com.apple.nvidia.driver.NVDAGK100Hal     8.2.4
com.apple.driver.AppleUSBAudio     2.9.5f4
com.apple.iokit.IOAudioFamily     1.9.5fc2
com.apple.kext.OSvKernDSPLib     1.14
com.apple.nvidia.driver.NVDAResman     8.2.4
com.apple.iokit.IOBluetoothFamily     4.2.3f10
com.apple.iokit.IOSurface     91
com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.2.3f10
com.apple.driver.AppleSMBusPCI     1.0.12d1
com.apple.iokit.IOAcceleratorFamily2     98.14
com.apple.AppleGraphicsDeviceControl     3.4.35
com.apple.driver.X86PlatformPlugin     1.0.0
com.apple.driver.IOPlatformPluginFamily     5.7.0d10
com.apple.iokit.IOFireWireIP     2.2.6
com.apple.driver.AppleHDAController     2.6.0f1
com.apple.iokit.IOHDAFamily     2.6.0f1
com.apple.driver.AppleSMC     3.1.8
com.apple.driver.AppleGraphicsControl     3.4.35
com.apple.driver.AppleBacklightExpert     1.0.4
com.apple.iokit.IONDRVSupport     2.4.1
com.apple.driver.AppleSMBusController     1.0.11d1
com.apple.iokit.IOGraphicsFamily     2.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.6.6
com.apple.iokit.IOBDStorageFamily     1.7
com.apple.iokit.IODVDStorageFamily     1.7.1
com.apple.iokit.IOCDStorageFamily     1.7.1
com.apple.iokit.IOUSBMassStorageClass     3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily     3.6.6
com.apple.driver.AppleUSBHIDKeyboard     170.15
com.apple.driver.AppleHIDKeyboard     170.15
com.apple.driver.AppleUSBMultitouch     240.9
com.apple.iokit.IOUSBHIDDriver     660.4.0
com.apple.driver.AppleThunderboltDPInAdapter     3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter     1.4.5
com.apple.driver.AppleThunderboltDPOutAdapter     3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily     3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter     1.4.5
com.apple.driver.AppleUSBMergeNub     650.4.0
com.apple.driver.AppleUSBComposite     656.4.1
com.apple.iokit.IOFireWireFamily     4.5.5
com.apple.driver.AppleThunderboltNHI     2.0.1
com.apple.iokit.IOThunderboltFamily     3.2.7
com.apple.iokit.IOEthernetAVBController     1.0.3b4
com.apple.driver.mDNSOffloadUserClient     1.0.1b5
com.apple.iokit.IO80211Family     630.35
com.apple.iokit.IONetworkingFamily     3.2
com.apple.iokit.IOUSBUserClient     660.4.2
com.apple.iokit.IOAHCIFamily     2.6.5
com.apple.iokit.IOUSBFamily     675.4.0
com.apple.driver.AppleEFINVRAM     2.0
com.apple.driver.AppleEFIRuntime     2.0
com.apple.iokit.IOHIDFamily     2.0.0
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     278.11
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.AppleKeyStore     2
com.apple.driver.DiskImages     371.1
com.apple.iokit.IOStorageFamily     1.9
com.apple.iokit.IOReportFamily     23
com.apple.driver.AppleFDEKeyStore     28.30
com.apple.driver.AppleACPIPlatform     2.0
com.apple.iokit.IOPCIFamily     2.9
com.apple.iokit.IOACPIFamily     1.4
com.apple.kec.corecrypto     1.0
com.apple.kec.pthread     1

hi,
thanks - yes, I've been through all sorts of info like that trying to troubleshoot what might be causing the problem. It only started occuring after updating to OS X 10.9.2. I was thinking that Chrome might be the problem, but it's not always listed in the 'BSD process name corresponding to current thread'. The backtrace always contains com.apple.GeForce(8.2.4) as well, which might be hinting at a graphics driver/card problem.
Any other suggestions are much appreciated!
cheers,
// greg
Added com.apple.GeForce

Laptop sleep/wake problems with 10.5.7

I installed the latest security update 10.5.7 this week. Since then I have been having numerous daily issues with my new macbook (2.1ghz).
Problems encountered:
- laptop not waking up completely. the display will show but it's like its frozen(keystrokes and mouse don't appear to do anything)
- drives spinning but the display won't come up (I can see the actual screen very dim and using the brightness levels doesn't help)

I installed the latest security update 10.5.7 this week. Since then I have been having numerous daily issues with my new macbook (2.1ghz).
Problems encountered:
- laptop not waking up completely. the display will show but it's like its frozen(keystrokes and mouse don't appear to do anything)
- drives spinning but the display won't come up (I can see the actual screen very dim and using the brightness levels doesn't help)

Mac Pro with Dell UP2414Q Sleep Wake Issue

Hi,
I have *two* Dell UP2414Q displays connected to a new Mac Pro, both using Display Port 1.2 (MST) setting in order to get 4K @ 60Hz.
Works fine. Except Google Chrome which is really lame at redrawing all these pixels when you scroll up/down.
The issue is: when the displays go to sleep for a longer period of time (actually it's probably when the Mac Pro itself has gone to sleep) and I wake the system up, the Dells sometimes won't wake up!
And if I start fiddling with the display buttons I will get a half image (left half of the screen). Same problem on each display except sometime it's the first one that doesn't wake up, sometimes it's the second one and sometimes it's both. Unfortunately the situation where they both wake up is extremely rare
Has anyone else had similar troubles?
Note: I have had similar sleep wake issues with just one UP2414Q connected.
I'm running OS X 10.9.4 (of course).
I'm also having a 3rd smaller display connected though a DVI adapter. That one wakes up 100% of the time. I previously had 3 of these and they did always wake up all 3 without issues.
-Francois.

I have this issue with the UP2414Q monitor and my new Mac Pro . . . . . and then some.
I started by losing the right half of the screen on wake up. After about two months of use, my monitor has developed a fault where both sides of the monitor are displayed but at seemingly very different calibrations. The left half is contrasty and the right half seems to be correctly matched to my working profile. This is using the display port connections. HDMI doesn't have this problem but it also won't run at 60Hz, which was an important factor in my choice of this monitor.
At this point I contacted both Apple and Dell. Although I have had quite a few different Apple support staff over a period of a week or so, they did keep good notes, were very patent and seemed to take a genuine interest into trouble shooting it. I cannot say the same for Dell. At first they did ask questions and did the right thing by sending a replacement. It worked fine on display port, then on HDMI but when I connected it back to display port the split screen problem occurred on the brand new replacement one too. After a day of fiddling with connections it went back to displaying correctly with all connections and has not reverted but it does now have the dead right halve on wakeup more frequently than before. I reconnected the original monitor but that has the split screen problem and I can't find a way of getting it to go away. It is unusable.
This incident with the replacement monitor was five days ago. In that time I have tried to contact Dell support by the original e-mail of the technician that initially helped and by phone, through the support number. The email gets the repeated response "Dear Sir/Madam, Thank you for your email. I have left for the day, hence my reply will be delay". It happens in the mooring or the afternoon. A phone call to Dell's support number always starts with a promise to be transferred to the technician dealing with my case and, without fail ends by me being left on hold indefinitely with a terrible one minute audio loop followed by a repeated promise of the next available agent. I once waited over 30 minutes, just to test it. I live in Australia but this was clearly an international call centre. Dell obviously have no intention of dealing with my case. They will have to talk soon though because I still have an extra one of their monitors.
Unless there is a firmware update for this monitor, I would strongly advise against buying one for a Mac, or any Dell product for that matter.

Frequent sleep/wake crashes with OS X Mavericks

Similar Messages

Maybe you are looking for