Frequently Bluescreen followed by Windows System recovery

I have a HP Pavilion h8-1104nl HPE desktop-pc. Now for 1 month. I'm running Windows 7 64-bit.
Frequently the system hangs at startup. I power up an bluescreen appears followed by system recovery.
After system recovery everything works normal. But after a few days the same problem occurs aqain. The system is original. I haven't put any hardware extra in it. I checked the hardware with HP vision diagnostic but everything is running performing the it shoud. Here are a few dumps.
112912-26785-01.dmp 29-11-2012 21:38:56 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02ceff74 tunnel.sys tunnel.sys+fb87a000     x64 ntoskrnl.exe+7efc0     8 15 7601 314.298
112012-26395-01.dmp 20-11-2012 7:15:30 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02ca5f74 mouclass.sys mouclass.sys+f60500     x64 ntoskrnl.exe+7efc0     8 15 7601 273.770
103112-19094-01.dmp 31-10-2012 23:46:04 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02ca8f74 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0     8 15 7601 273.770
102912-18751-01.dmp 29-10-2012 21:33:25 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02cdcf74 Beep.SYS Beep.SYS+fc30af00     x64 ntoskrnl.exe+7efc0     8 15 7601 314.402
102212-18423-01.dmp 22-10-2012 9:37:55 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02ce1f74 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0     8 15 7601 314.402
101712-19453-01.dmp 17-10-2012 7:49:32 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`02ca8174 ntoskrnl.exe ntoskrnl.exe+7f1c0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7f1c0     8 15 7601 273.770
Maybe someone knows if it is an hardware problem or a software problem?.
And is there a solution for this problem.?
I am looking forward to your reply. (help).
kind regards, ma2ling

Hello ma2ling,
With the ntoskrnl.exe crashing I am thinking this is software / driver that is causing your problem and that your hardware is likely fine.
The first thing we should do is run the system file checker to check the integrity of the system files.
1. Click on start
2. Type CMD and right click on run as administrator
3. In the CMD prompt type "SFC /scannow" (without the quotes)
Note: There is a space after SFC and before the /scannow
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Similar Messages

IPhone and windows system recovery

hi i have an iphone and i did a system recovery recently (windows xp) and i was wondering if when i connect to itunes to sync it says delete all files. will it delete my photos, contacts and notes and music or just my music

007bond,
If you put at least one contact into Outlook or Address Book, you will get the option to merge the contacts with your computer. Notes are not synced with the computer at all, so those should remain unchanged.
Hope this helps,
Jennifer B.

Windows Vista/Service Pack 2-after performing a System Recovery my Hard Drive is full.

     I would like to thank you in advance for your patience. I am new to this forum solution method. I will do my best to explain what is happening with my computer without too much unnecessary information.
     My laptop is 2 yrs old and it all these error messages started popping up repeatedly. Windows Defender wouldn't open, system info errors, I/E crashes and so on. After numerous attempts to fix it myself, I asked Microsoft support for the solution.     M/S Tech Support instructed me to perform a System Recovery, through the startup/F-11 method and so I did. I followed all of M/S instructions and to skip the step for making a set of Backup disks, as well as the Recovery Manager's steps to complete the recovery. After all was done I noticed that all my personal files, (pic's, music, etc...), were gone and that my Hard Drive is out of space. I did a Disk Cleanup and defrag on both the C: and D: drives hoping that it would solve my problem. NOT!!! I have been looking through all the "Trouble shooting" support topics on both MS and HP. I have been afraid of doing any of the MANY suggested steps for fear of causing more damage.  The computer, except for the D: drive delima and Windows Defender not opening, seems to function properly, so I look at that as the real blessing in all this.
     Please help me by telling me that there is a way to fix the Hard drive and get Windows Defender to respond. Most importantly, how to go about getting it done. I just don't know how or why this happened.
     Thank you so much for your help. Nice to know that there are web sites and forums like these to go to for help. I look I look forward to your response.

This excerpt taken from HP manual for your computer.
On some models, you can perform a recovery from the partition on the hard drive from either the Start
button or f11. This restores the computer to it's factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
● Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
● Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
on the screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions
Does this sound like what you did?
Oh yeah, Your D:\ drive is your Recovery partition and you should never mess with it.
It contains all the information to restore your computer to factory condition.

SYSTEM RECOVERY (F11) is inaccessible after dual-booting Windows 7 and Windows 8.

I dual booted Windows 8 with Windows 7 and now the RECOVERY partition (F is not loading upon pressing F11. It gives me the boot configuration data error. I have it marked as Healthy (Primary Partition) and I am able to access the files via. My Computer in both OS, but not through F11 System Recovery.
The bcdedit log is here: http://pastebin.com/b0Y5Hd1F
My partition letters:
C: Windows 7
D: Windows 8
F: RECOVERY
H: SYSTEM
In Visual BCD, One WRE is set to D: and the other is set to F:. Should i set both to F, which is the actual RECOVERY partition?
[2] The UEFI boot setup is unable to create HP_TOOLS parition because 4 partitions already exist. I don't remember having the SYSTEM partition earlier so maybe that repalced HP_TOOLS?
[3] When I try to create a recovey media, the orange circle filter keeps of going even after I have inserted the an external USB hard drive for it to detect. Does it usually take this long? I am guessing once the recovery media is made I could do system repair from there and get RECOVERY to work?

What is the p/n? Remove the battery and look for it. Post all alphanumeric characters.
CTO means configure to order. That means only you and HP know the notebook's configuration.
The problem you are going to run into is that there is a maximum of four primary partitions allowed by Windows. That is by design. It appears that you removed the HP_TOOLS partition, which was a requisite for the UEFI diagnostics.
Frankly it looks like what you will have to do is put the UEFI environment on a USB stick.
I would create the recovery media on a high quality 16GB USB drive.
The partition schema must be as follows:
1) C: (NTFS)
2) HP_Tools F: (must be FAT32)
3) RECOVERY D: (NTFS)
4) SYSTEM (NTFS) created by the Windows install process
I am not aware of a dual-boot or more schema that allows a UEFI environment with the Recovery Manager accessible from F11. I wish I had better news for you. Perhaps our forum Provost DavidPK knows how it can be done.
I do recommend that you copy the RECOVERY partition to an external disk for safety sake.
If you are able to boot into the recovery manager I strongly suggest that you create your recovery media. If you do not do that you will not have a copy of your operating system and drivers for a plan B. I did not go with the option you used and did not create problems to deal with later.
When I play around with my loaner notebook and configure it to dual/triple boot, I always install a different hard disk and put the original one aside. You can still return your system to its original configuration and then take the hard disk out and use another one to play with. I believe that would be the wisest path to follow.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can't reinstall Windows 7 with Operating System Recovery Disk x120e

Hi,
I dabbled with Ubuntu on my Thinkpad x120e, but found that the dual-boot was unneccessary. I (likely foolishly) followed directions online to use EasyBCD (http://www.makeuseof.com/tag/nongeeks-guide-safely-uninstall-ubuntu-dualbooting-machine/) to overwrite GRUB.
Of course, now Windows won't load! I get an error
Windows failed to start...
1. Insert your Windows installation disc...
2. Choose your language..
3. Click "Repair your computer"
If you do not have the disc, ...
File: \Boot\BCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
I got the Operating System Recovery Disc from lenovo (thanks Lenovo for sending it) and copied it to a USB as the computer has no DVD drive. When I start the computer from the USB and select run from USB, it begins to load Windows, then Lenovo Rescue and Recovery 4...but then it crashes and restarts. When I hit f8 and startup in SafeMode, it begins to load the safemode screen, but then also crashes.
Any advice on what to do?? Many thanks.

Hello,
If you are okay with erasing the contents of the hard disk drive, you can try booting to a Windows Command Prompt, running DISKPART.EXE, selecting the hard disk drive, and issuing a "clean" command, which will erase the disk so that the operating system can be reloaded.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

System Recovery disk for Windows 8.1

Hi, I have upgraded my pc from Windows 7 to Windows 8. Every thing went ok. Now I have upgraded it to Windows 8.1. So far every thing went fine. However, can some one tell me how I can create a System Recovery Disk at this stage? I have managed to create
a Recovery Drive USB stick.

Hi,
According to your description, I suggest you use system image backup to create a System Image.
You may refer to the following steps:
1.Press Win+Q, search File history. Then click it in the display list.
2.In the File History control panel that appears, look in the lower left corner. The option you're looking for is System Image Backup. Click that, and the familiar Create a System Image wizard appears.
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

Lenovo G580 - WIndows 8 - Resizing OS partition & problems with system recovery

Hello Everybody,
Just bought a Lenovo G580 notebook with pre installed Windows 8 (500gb harddisk, 4 gb RAM, Intel B960).I have been using Easeus partition manager with Windows 7 & its been working very well.So I wanted to partition my new HDD with it.Upon creating the a new 100gb partition (most importantly from OS partition that was about 428 gb) a very strange thing happened.The Refresh/Reset functions of WIndows 8 stopped working saying required recovery files are missing, also Lenovo One Key recovery program does not work with the message that required service partition is currently unavailable.At the same time, apparently partition called Windows recovery (1000 mb, hidden) still exists.One more peculiar thing I noticed & that is there is a new 1mb unallocated partition before the Windows recovery partition.While partitioning I did not receive any message about deleting of any data.One last piece of information (not sure if relevant) is before doing partition I had created a system image that I am unable to restore, Windows 8 repair function recognises the image bit is unable to restore it.
Any ideas how to restore the System Recovery functions or how to restore the system image.
Thanks
Petr

Hi petrmichal,
Thanks for Posting and welcome to the Lenovo Community,
I’d like to apologize to you for facing this issue but am sorry to tell you that the HDD partitioning caused that the recovery image won’t be working anymore and in the case that you want to create back system image recovery will be at the service center,
I’d like to provide you with the contact support number to able to contact them:
India
IDEA-branded and
B, C, E, G, H, K, N, Q, V, Y Series Products
Toll Free Number 1: 1800-3002-9929
Toll Free Number 2: 1800-425-9003
Email : [email protected]
9AM - 9PM
Monday - Saturday
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows stuck on blue HP Invent screen and won't load desktop items after doing a system recovery

Hello, this is my first time posting here, as I am in desperate mode! I have a HP Pavillion Slimline s5304y desktop pc, using Windows 7, that I purchased in Feb 2010.
After getting a virus on my computer, I ordered system recovery disks from HP and did the recovery to original factory settings process (twice!), however, during the Windows setup process, it doesn't ever get past the blue HP Invent screen that says:
--Do not turn off your PC during this one-time setup process
--Your PC restarts several times during this setup process
--Messages may pop up onto your screen. Ignore these messages until you are prompted to restart or shutdown your PC
Towards the bottom of the screen it continues to say "Please wait..." with a scrolling green bar. All I see is the windows start buttom in bottom left corner but am not able to access anything and I don't ever get my desktop screen or desktop icons. I have restarted and shut down several times and as soon as I log on to windows, I just get that same blue screen.
The 2nd time I did the recovery process, I let it continue overnight (just in case I wasn't waiting long enough) and my computer never shutdown like it was supposed to when the installation was complete. Also, I watched the whole process the first time around and my computer never restarted like it said it was supposed to; it just seemed to be stuck during the rest of the windows setup process. It eventually just went into sleep mode.
I don't have anything else plugged in except the power cord, the monitor and the keyboard/mouse. I have not installed any new hardware since I purchased the computer.
I did a diagnostics test and everything passed.
I tried to get help from HP Support, but because I'm out of the warranty period, they cannot help me and want to charge me $99!!!
I don't know what else to do at this point. Can someone please help???
Thank you.
This question was solved.
View Solution.

Hi,
I would try wiping the entire Hard Drive first and then reinstalling the Operating System as this may get around this issue.
Download and install Killdisk on the link below - ( despite the name, this application will just write zeros to the entire drive leaving it in a similar state to a new Hard Drive ).
http://software.lsoft.net/KillDiskSuiteFree-Setup.exe
Download and install ImgBurn on the link below.
http://download.cnet.com/ImgBurn/3000-2646_4-10847481.html
Go to the Kill Disk application you have installed in All Programs, open the main folder, then select Bootable Disk creators and from that select Bootable DOS CD Creator which will burn the bootable ISO to a blank CD.
During the next process do not worry about any warnings as your Recovery DVDs will reformat the HDD.
Insert this CD in to your PC that is unable to load Operating System properly. Shut the PC down, then start it again to boot from the Killdisk CD and follow the on screen instructions for Kill Disk.
A brief description of the process is here Killdisk.
Use this to wipe the whole of the Hard Drive, highlight (80h) and press f10 ( you will also have to type a confirmation and hit enter ) - ( this will make sure you include all partitions and then start the process - this may take a couple of hours! ).
When the process is complete, remove the Killdisk CD, insert your first HP Recovery Disc and try the installation again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

System Recovery Options in Windows 7 (MBP and Parallels)

I realize it is probably debatable (perhaps at best) if this belongs here but I have borked my Windows 7 installation on my MacBookPro running Snow Leopard and I now see this after opening Parallels and either starting or shutting down the virtual machine:
http://dl.dropbox.com/u/15285654/Screen%20shot%202011-11-25%20at%2011.13.16%20AM .png
I am trying to follow some system recovery recommendations and I can't quite figure out if I need to hold down "Fn + F8" upon a Restart of the Virtual Machine - or if I should put the install Disk in and then somehow /boot/ to the CD Rom or what:
http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7
If anyone has any advice I'd love to fix this problem without a full re-install of Win 7.
Thanks.

Thanks - but I can't seem to install it! Even in compatibility mode. I get an error box telling me to check nothing else is running (...), and a message saying it has encountered error code -6003.
Could this have something to do with me running Windows 7 x64?
Thank you...

Missing files after System Recovery, HP Pavillion G62, Windows 7, 64 bit.

My 5 month old laptop is showing signs of slowing down. When this occurs I do a system recovery in an effort to correct any problems. After completion of system recovery I always get the following error;
                         (the system cannot find the file specified (Ox80070002))
                           C:\users\owner\applicationdata\locallow.
                           C:\users\owner\contacts.
                           C:\users\owner\searches.
The notice is in Notepad. None of the files can be found with a search from the main menu. If no refererence to the files can be found how does the computer know they exist? My feeling is that the computer cannot operate up to speed with missing files?
I do have some other oddities occuring but I don't think you can solve anything if files are missing.

Those are user file locations and will not affect windows or how it runs, you can ignore that error.

Windows vista recovery error CTOERROR.flg and following that error 0x643 while installing update

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows dialog box - windows security update is not installed successfully . I need to install all updates in one go like last time from my understanding.:
1. So if i install windows update (to try my luck as last time) it shows 0x643 error for .net framework and asks to restart and after that when i try to manually install failed updated 0x643 it asks me to restart the windows for pending updates.
2. Alternatively, If i try to install failed update first just after recovery failure it won't allow me to install important updates for vista sp1 and asks to restart windows.
All i need is to successfully update all updates through windows automatic update which is not happening at the moment.
Not even able to upgrade to sp2 bcz it too restarts for installing.
Please Help.
Thanks in advance.

Hi Mario-L,
I manually downlaod the update KB3035034 and tried to install in my preview build 9926, it shows The update is not applicable to your computer". Actually, what shows in my system when I check for updates, it detects update Kb 3037975
and 3037975 redirects you to 3021953 see description in this link
http://support.microsoft.com/kb/3021953
After installing the updates, and view update history, it shows:
Personally, I have no idea on this issue currently, please submit a report via Windows Feedback App
Yolanda Zhu
TechNet Community Support

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

Dv4-1275mx Replaced Hard Drive Windows Vista System Recovery Failure

I have a HP dv4 1275mx laptop and I just replaced the hard drive. I got the Vista 64-bit hp system recovery discs from HP but the recovery has failed 4 times. The hard drive is brand new and has more space than the old one. It's a Western Digital 640 gb scorpio blue sata 5400 rpm. Windows will not complete the download.
On the original hard drive, I upgraded to Windows 7.
Error message:
[17:18:51.36] chkerrBB.cmd Detect some error during PININST_BBV.
[17:18:51.37] chkerrBB.cmd check c:\system.sav\logs\BurnBootWarn.log

Try the "Solution" offered here:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Recovery-Manager-Problem-Recovery-fails/...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problem with system recovery for a new hard drive in my Pavilion p6210y Windows 7 Premium 64bit

   I decided to swap out my hard drive when my computer would fail to start up or crash right after starting. Diagnostic tool at startup said the hard drive was faulty and other times I would get BIOHD-1 and BIOHD-2 errors. I replaced the old WD Caviar Blue 640GB with a new Caviar Green 1TB. I ordered and received from HP a system recovery disc set which included five discs labeled:
Use This First! System Recovery,
System Recovery 1:1,
SYstem Recovery 1:3,
System Recovery 2:3, and
System Recovery 3:3.
   After putting in the new hard drive I used the "Use This First!" disc and everything seemed to be going fine. The scene showed "Loading Windows" or something like that. After about 10 minutes the CD drive opened and the Monitor showed three images: a big green check mark which I assume meant everything was good up to that point; a graphic showing the removal of the first disc; and a graphic showing three discs to be put in. Wondering whether to put in the System Recovery 1:1 disc or the System Recovery 1:3 disc, I noticed that the drive bay closed with the "Use This First" disc still in. I managed to get the Drive to open after pressing the open button quite a few times. I closed it with the 1:3 disc and nothing happened (no light showing activity in the DVD drive). After a minute or so I managed to get the drive open again after quite a few times pressing the open button. I put in the 1:1 disc and still nothing. At this point I could only open the drive bay with a paper clip in the release hole. With the computer unresponsive and the monitor still showing the same as when the first disc came out, I decided to turn it off with the "Use this First!" disc in the drive hoping to start from the beginning again. Now the directions that came with the HP System Recovery discs state:
   CAUTION: Do not turn off the computer, or use the keyboard or mouse during this time. Doing so will interrupt or damage the software installation.
   Now when I turn the power on I get either:
the HP blue screen with the green hand, (F11=system recovery), (F9=Diagnostics), (F10=Setup) and (ESC=Boot Menu). pressing esc, F9, F10 or F11 does nothing.
Or the HP blue screen appears and then almost immediately goes to the black screen with " Reboot and select proper boot device or insert Boot media in select Boot device and press a key". I've gotten this scene while trying almost every System Recovery disc in the drive. Hitting a key does nothing other than repeating the same message.
Once I got a "The file is corrupt. The file header checksum does not match the computer checksum" error. That appeared only once in about 30 try's.
   The open DVD drive button works sometimes and not other times. I can't seem to figure out a pattern for when it will work.
   I don't know whether I might have accidentally moved the mouse or hit the keyboard during the first attempt. Can I do something to the new hard drive to get it back to a state where it can start from the beginning again? Might it be a problem other than the old hard drive. Anyone have any suggestions?

Satellite L505D-S5983
Windows 7 Home Premium 32-bit
Yes, of course! See the link to your model's spec above.
My apologies. The previous link went to a spec for the Satellite A505-S6960 (which came with Windows Vista installed). I had too many spec pages open at the same time and got them mixed.
So, are you telling me that I won't get this one to work?(the BPKT)
No. But you may face the problems that I outlined in this message.
-Jerry

Frequently Bluescreen followed by Windows System recovery

Similar Messages

Maybe you are looking for