Fresco Logic xHC1 (USB3) Root Hub driver problem Code 31

I have the Ideapad S206 Windows 7 32 bit and have a driver problem which I believe is due to a Windows update at sometime. I get the following statement :-
"The device is not working properly because Windows cannot load drivers for this device (Code 31)"
Can someone very kindly please advise me how to sort this out. Apparently uninstalling the driver and then reinstalling does not work.
Jezza

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try updating the following to verify the issue is fixed
Fresco USB 3.0 Driver Win7 USB3.0 Driver (Fresco) Win8
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Similar Messages

WPD FileSystem volume driver has a driver problem (code 10)

Hi,
My laptop is a window 7, I always use a D-Link modem for internet. Previously the modem was well working and with high speed, also there was no problem with connections. Few weeks i encountered a problem with connection in my modem.
I have tried to troubleshoot and discovered that there is a problem with WPD FileSystem Volume Driver, the device manager displays a message that it can't start with an error code 10 together with a yellow exclamation. When i try to proceed i get instruction
of uninstalling and re-installing the WPD FileSystem Volume Driver, the issue is that i get the option for uninstalling it but i don't know how to re-install it.
Please i need your help to solve this.
Regards,
Mkashiwa.

Hi,
After uninstall the driver from Device Manager, reboot your PC and let Windows automaticallly re-install the driver for you.
What is the result?
You can also take a look of this KB for code 10 error
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104
Yolanda Zhu
TechNet Community Support

Install usb3 hub driver before first login

Hello,
I captured the image of W7 with all drivers in place (device manager absolutely clean).
After deployment from MDT2012 I have Root Hub USB3 with yellow triangle. So USB devices not running. No mouse and keyboard. To resolve the issue I have to run Driver package from within the Windows.
I found the exact discussion and possible solution here:
http://social.technet.microsoft.com/Forums/en-US/387263f3-6128-4ac5-89c3-bde165b9e1fe/driver-installation-problem-usb-30-root-hub?forum=configmgrosd
People talking about deployment from SCCM. Not very clear for me...
Could somebody clearly explain the steps that may help to deploy the appropriate driver.
Can I add it to out of the box or to do something from the TS for this particular model.
I have SP from HP that can extract and point to driver installation. Basically it could be at post installation because first login is Autologin. I have windows update from WSUS enabled pre application. So here I can run this driver installation. May be
to add it as application and check it in Lite touch ?
What will be the best way?
Thanks.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Yes, when the SkipFinalWarnig=YES statement is NOT implemented, an automated reboot would be suppressed if an error occured during deployment.
For your other problem, there is a simple solution:
Edit you TaskSequence
Add a Restart Computer entry, using Add > General > Restart Computer
Make sure it's the last statement
With this Restart computer statement selected, go to the Options tab
Use Add > Query WMI
Use this as the WQL query:
SELECT * FROM Win32_ComputerSystem WHERE Model LIKE "%model%"
Note that you need to replace MODEL with a unique sting that is in the model-string of that specific model, for inctance, on a
HP Probook 6570b, you would state: "%6570b%".
You can find the model string using PowerShell:
Get-WmiObject -Class Win32_ComputerSystem
After saving the changes, the reboot should only take place on models matching the WMI query.
That said however, it's a good idea (in fact good practice) to always reboot after deployment; this resolves a lot of issues you might have in several situations...
Regards,
Martin
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

V200 PROBLEM - USB ROOT HUB (2 POR

hey everybody.
i have one problem - i can't connect my v200 to computer - i mean when i wawt to do this to copy some files i have notice: ' usb device bot recognized - one od the usb devices attached to this computer has malfunctioned, and windows does not recognize it' and a notice USB ROOT HUB (2 PORTS). i have this problem since my sister rebooted computer with connected v200
thx for help - and sorry for my mistakes in english

i have forgotten that after my sister had rebooted computer with connected v200 i can't use it as a radio or mp3 player as well (after long pushing the play button nothing has happening)

USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
- 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition.
Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
problem?

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

Audigy 2NX USB Root Hub Prob

Hopefully someone here will have some suggestions to help resolve my issue.
I have fi've USB Root Hubs on my computer; the USB system is 2.0
Only two of those hubs are in use. One hosts my Canon scanner.
The other hosts every other USB device on my system.
That in itself is an issue, but because not all of my USB devices are in use simultaneously, it hasn't previously been an issue.
Now, however, it has become one.
Both my Audigy 2NX and a four-port self-powered USB 2.0 hub are on one USB Root Hub. The four port hub has my two printers connected to it.
The issue is that when I use my laserjet printer, it disables the Audigy 2NX. The Audigy normally comes back up after the printer has gone back into sleep mode.
However, if I am playing a game when the printer is used (I share it on a wireless home network) it disables the Audigy and it can only be brought back up by restarting the computer.
I think it is one of two issues;
. The four port hub with the printers on it cannot share a root hub with the Audigy 2NX; when the laserjet comes out of sleep mode, it uses all of the bandwidth on that root hub and disconnects the Audigy.
2. A recent driver update to the Audigy is conflicting somehow with the printer.
I might also be tempted to think it was a power supply issue if I didn't have a robust 650 watt PSU on my system.
To try to get the two devices on separate root hubs, I turned off my computer and disconnected all of my USB devices. Then I connected one at a time, powering down in between connections.
The device assignment remained the same.
My next step is to uninstall the Audigy 2NX completely from my system, and then re-install from the base drivers.
My question is; does anyone know how to force devices to install to a specific and/or different root hub outside of their physical connection? An .ini edit or perhaps a driver edit's
Thanks in advance for any help.

I have an Audigy 2 NX myself, and I found it works best off of a direct root usb port (not off a hub). The problem is that on most computers 2 USB ports share hub. Which is why you are having that comflict.
My conflict doesn't happen there, it was on the mouse at first, now it's on an external IDE Adapter i'm using.
All I do is unplug the IDE adaptor when it stops working, waiting a few seconds, then plugging it back in.
So what I suggest is to do like I did, and switch what ports things are plugged into until it's something that can plug & unplug with no real issues.
Why this happens, in opinion, is that there just isn't enough power getting to all the usb ports when there's alot of stuff plugged into them. My limit seems to be 7 items, even though most of them are lower power stuff, mouse, joysticks. I do have a 3.5" hd in a case, which is self powered, and the ide adaptor which is self powered, and the audigy 2 nx, which is, as you know, self powered. I can plug another item in, but anymore after that will knock my ide adaptor. and i still have usb ports i'm not even using. oh, the joysticks are on a hub which is where I usually plug another item in, either my mp3 player or thumbdri've.
I think it most likely an electric problem, and that it only affects people with faulty usb componets or something. I haven't heard of it being widespread or specific chipset/usb controller problem. Can't think of anything else it could be, but i'm not an electrition.
Sorry i could be of much help, but maybe you can at least make it less of a bother to deal with.
good luck

Obscure Nano and Mini XP USB Driver Problem Finally Solved

I had a rather obscure USB driver registry problem that few others would probably have, but this might be helpful.
I was unable to get Windows XP SP2 Media Center Edition to properly recognize either my iPod Mini or Nano 3rd generation. The iPods would be seen by XP in Device Manager (would show Apple iPod USB Driver) when connected, but would immediately disconnect. The Apple iPod USB Driver properties would then show “This device cannot start (Code 10).”
I first tried all the Apple-recommended fixes: the five Rs; reinstalling the Apple iPod USB driver; disconnecting all other USB devices; switching USB plug-in points; putting the iPod into Drive Mode; and all the other things shown in the troubleshooting guide “iPod shows up in Windows but not in iTunes,” http://docs.info.apple.com/article.html?artnum=93716
None of the above worked. And on occasion after uninstalling and reinstalling the iPod USB driver, I would get a blue screen with the error message “driverirql_not_less_orequal,” sometimes followed by stop codes and something called “USBPORT.SYS.”
Apple phone support was unable to help, claiming that XP Media Center Edition was not supported, though the problem appeared to have no relation to MCE versus Home or Pro.
Then I finally stumbled onto the solution. I previously had installed a USB drive encryption program (NTINinja) on my computer. Although I had uninstalled the program months earlier, it had left a registry entry which was interfering with the iPods. When I deleted the registry entry, the problem was solved.
Those of you having similar recognition problems as described above might check Control Panel, System, Hardware, Device Manager, Universal Serial Bus Controllers, USB Root Hub, Properties, Details, then select Class Lower Filters in the drop-down box. If there is an entry, that might be the problem.
To get rid of the entry, first write down what it is. Then go to Start, Run, Regedit. Backup the registry (File, Export). Then go to Edit, Find, and type in the suspect entry. It should find the registry key containing the entry in HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\.
Right click on the LowerFilters key and select Modify. Then delete the suspect entry. Close the registry editor. You might have to reboot – can’t remember.
I can’t guarantee the above is completely accurate, but it may help someone.

OK now! Dag, I was going crazy. I had two brand new Raptors and was trying to hook them up in a RAID 0 config. I am no dummy. It would hang at detecting arrays. I could not figure it out for the life of me. I will not talk about all of the combos that I tried. My buddy told me to try datalifeguard from WD. I did. Well, one HD showed no serial number in the extended test. An error message popped up. Said the drive was not working. So, Newegg sends me a dead drive and wastes days and days out of my life. I hooked up the one good drive just now. What do I see? For the first time in my life, I am seeing the raid bios! This almost cost me a divorce. Seriously though, the wife would come in and rub my shoulders like a fighter after a few hours of getting my azz whipped by this new rig. I am now going to make the floppy with the newer drivers like was done here. Just incase. I am in Raid bios now in the other room. Time to go set up XP on one drive for now. I refuse to wait for the RMA'ed second Raptor.

Intel(R) USB 3.0 Root Hub, not installed

Dear Sir, I am Recently purchage HP HP 15-r264TU, tried to instal drivers for windows 7 64 bit OS, its not installed properly and also not ditect pendrive. it showing some worning mark at Intel(R) USB 3.0 Root Hub, i want your help to salve this problem. i am eagerly waiting for your valuable reply. Thanking you:Beeresha R s

Hi: Download, unzip and run the setup.exe file from the link below... https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Controller-Driver-for-Intel-8-9-Series-and-C220-C610-Chipset-Family

Re: Usb Root Hub Message

Hi
i am doing some researching for my friend who has a laptop, model no
Toshiba Satelite A200 System Uni
Model No. PSAF0A-02L0K
He recently has purchased a wireless internet usb stick
when he connect this through the USB ports, he gets an USB Root Hub message and informs him that this product can work faster
We are unable to source what the problem is and rectify this issue as his internet is working very slow
Any help would be greatly appreciated

Sounds like its running in USB 1.1 mode.
Possible reasons could be:
1) There is anothe rUSB 1.1 device plugged in that is causing the 3G USB device to run slower.
2) There is a conflicting USB driver installed, such as a printer driver or USB Storage driver, or camera driver.
3) The Intel Chipset drivers are incorrect or not installed properly.
Does it happen on all the USB ports?

USB 3.0 port driver problem?

Hello, I have an Acer TimelineU M5-48-TG-6814 ultra book laptop. It has two USB 3.0 ports, but I recently discovered that there is something wrong with the drivers for them, because I can't use USB 3.0 devices at superspeed. I have plugged in 2 devices, and they both operate at USB 2.0 speed. In my device manager, I have several things under universal serial bus controllers: 4 entries for generic USB hub (I think that's my USB 2.0 hub)2 entries for Intel(R) 7 series/C216 chipset family USB enhanced host controller1 entry for Intel(R) USB 3.0 extensible host controller1 entry for Intel(R) USB 3.0 root hub2 entries for USB composite device2 entries for USB root hub I was having problems with my laptop, and recently reinstalled my operating system, with some resulting driver problems ( for some reason it didn't install with like any of the correct drivers, including the ethernet and Wi-Fi drivers, which were a pain in the ass to fix). This may be because the laptop originally came with Windows 7 home premium and I installed Windows 7 professional. But either way, I had to manually install lot of the drivers (I downloaded them from the Acer website), including the 2 entries for USB 3.0 drivers. Anyway, although these USB 3.0 drivers say they are functioning correctly, they aren't. When I plug in my USB 3.0 devices, I can see that they are using the USB 2.0 drivers (I downloaded some software to see this: USBlyzer). I tried disabling the 2 USB 2.0 drivers ( the ones that say enhanced), then plugged in my device and it acted like nothing was plugged in. Also, I'm a little bit confused as to why there is only one USB 3.0 host controller and root hub entry, because I have 2 ports. Anyone have any advice?

Oh also, my hard drive for this laptop failed earlier this year, and I replaced it with a new SSD (the original one was a hybrid). I'm pretty sure the USB 3.0 ports worked before that

P35 platnium and optical drive problems

anyone had a situation like this??
Event Type:   Error
Event Source:   mv61xx
Event Category:   None
Event ID:   9
Date:      11/4/2007
Time:      2:13:00 AM
User:      N/A
Computer:   *******
Description:
The device, \Device\Scsi\mv61xx1, did not respond within the timeout period.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 ......f.
0008: 00 00 00 00 09 00 04 c0 .......À
0010: 01 01 00 50 00 00 00 00 ...P....
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 07 00 00 00 ........
here is my system info. the info in orange is on the cd drive and the dvd drive.
SiSoftware Sandra
System
Host Name : *****
User : *****
Workgroup : *****
Processor
Model : Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz
Speed : 3.36GHz
Cores per Processor : 2 Unit(s)
Threads per Core : 1 Unit(s)
Type : Dual-Core
Internal Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way set, 64 byte line size
L2 On-board Cache : 1x 4MB, ECC, Synchronous, ATC, 16-way set, 64 byte line size, 2 threads sharing
System
System : MICRO-STAR INTERNATIONAL CO.,LTD MS-7345
Mainboard : MICRO-STAR INTERNATIONAL CO.,LTD MS-7345
Bus(es) : ISA PCI PCIe IMB USB i2c/SMBus
Multi-Processor (MP) Support : 1 Processor(s)
Multi-Processor Advanced PIC (APIC) : Yes
System BIOS : American Megatrends Inc. 8.14
Total Memory : 2GB DDR2-SDRAM
Chipset 1
Model : Micro-Star International Co Ltd (MSI) (Bearlake) Processor to I/O Controller
Front Side Bus Speed : 4x 480MHz (1920MHz data rate)
Total Memory : 1GB DDR2-SDRAM
Video System
Monitor/Panel : Acer LCD Monitor AL1711
Adapter : NVIDIA GeForce 6200 LE
Physical Storage Devices
Intel Raid 0 Volume (RAID) : 468GB (C:) (P:)
LITE-ON DVDRW SOHW-1693S (SCSI) : N/A (D:)
LITE-ON LTR-48125W (SCSI) : N/A (E:)
Logical Storage Devices
XP Pro (C:) : 317GB (284GB, 90% Free Space) (NTFS) @ Intel Raid 0 Volume (RAID)
Vista (P:) : 150GB (136GB, 91% Free Space) (NTFS) @ Intel Raid 0 Volume (RAID)
CD-ROM/DVD (D:) : N/A @ LITE-ON DVDRW SOHW-1693S (SCSI)
CD-ROM/DVD (E:) : N/A @ LITE-ON LTR-48125W (SCSI)
3.5" 1.44MB (A:) : N/A
Peripherals
Serial/Parallel Port(s) : 1 COM / 0 LPT
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2934
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2935
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2936
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2937
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2938
USB Controller/Hub : Intel(R) ICH9 Family USB Universal Host Controller - 2939
USB Controller/Hub : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
USB Controller/Hub : Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse : Microsoft USB Wheel Mouse Optical
Human Interface : Microsoft USB Wheel Mouse Optical
Communication Device(s)
Device : SoftV92 Data Fax Modem
Printers and Faxes
Model : Microsoft XPS Document Writer
Model : Microsoft Office Document Image Writer
Model : Intuit Internal Printer
Model : Auto hp deskjet 930c series on ******
Model : 932c (old faithful)
Power Management
Mains (AC) Line Status : On-Line
Operating System(s)
Windows System : Microsoft Windows XP (2002) Professional 5.01.2600 (Service Pack 2)
Platform Compliance : Win32 x86
Network Services
Adapter : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
SiSoftware Sandra
SCSI General Properties
Controller : 1
Bus : 0
Target ID : 4
Logical Unit No. : 0
General Information
Device Type : CD-ROM/DVD
Manufacturer : LITE-ON
Name : DVDRW SOHW-1693S
Version : KS0B
Serial Number : 2005/08/22 1
Removable Drive : Yes
Embedded Media Changer : No
SCSI General Properties
Device Connected to Port : Yes
Width : 8-bit
Addressing : 8-bit
Multi-Ported Device : No
Relative Addressing Mode : No
Synchronous Transfers Support : No
Data Transfer on Secondary Bus : No
Asynchronous Event Notification : No
Queueing On : No
Linked Commands : No
Soft Reset : No
Normal ACA : Yes
Terminate I/O : No
Miscellaneous Capabilities
Reads ISRC Information : No
Reads Media Catalogue Number : No
Reads Bar Codes : No
Disk Properties
Performance Tips
Warning 2600 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
SiSoftware Sandra
SCSI General Properties
Controller : 1
Bus : 0
Target ID : 5
Logical Unit No. : 0
General Information
Device Type : CD-ROM/DVD
Manufacturer : LITE-ON
Name : LTR-48125W
Version : VS06
Removable Drive : Yes
Embedded Media Changer : No
SCSI General Properties
Device Connected to Port : Yes
Width : 8-bit
Addressing : 8-bit
Multi-Ported Device : No
Relative Addressing Mode : No
Synchronous Transfers Support : No
Data Transfer on Secondary Bus : No
Asynchronous Event Notification : No
Queueing On : No
Linked Commands : No
Soft Reset : No
Normal ACA : Yes
Terminate I/O : No
Miscellaneous Capabilities
Reads ISRC Information : No
Reads Media Catalogue Number : No
Reads Bar Codes : No
Disk Properties
Performance Tips
Warning 2600 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

Quote from: Frankenputer on 05-November-07, 19:52:22
I refuse to read that colored print.
im sorry u feel that way.
Quote
Also, posting "bump" will not get you answers/help any sooner.
i'll determine if my posting of bump help me get responses.
Quote
Read the >>Moan Guide<< as Maesus suggests.
i have read the moan guide. thanks for your concern.
don't take this the wrong way frankenputer but i don't think you have the knowledge of this situation to help me so please don't post on this thread anymore.

Power management issue USB 2.0 Root Hub

82801EB USB 2 Enhanced host controller .
USB 2.0 Root Hub
Power management issue.
The check box of the Function (Allow the computer to turn off this device to save power) Remains always unchecked , it does not matter if you check it , in the next check in the properties window it will be unchecked again .
My problem is that my system does not hibernate if I set time more than 15 minutes or so.
The system stays-On for ever, I have check for software issues, but everything looks normal, at my search for power management problems in drivers, I found this issue, with the USB 2 controller.
I have unplug any USB device from it, and the power management status does not change also.
The INTEL driver file is very fresh, 29/4/2004.
Does any one have any ideas, Beta driver or other solution?

Well i think that i found my real problem , even if the above issue is not 100% responsible for my troubles .
The AVAST antivirus was blocking the hibernation , by one function called as ( On acces file check ) .
I did disable it , and my system now hibernates .
The point is that even now , i am not 100% certen that the system will act corectly its and every time .
But at list i did a good step on the corect direction.

DVD drive problem or dodgy disk?

Hi all,
I am currently trying to install a program (Logic Studio) on to my iMac. The first install disk works fine but the installation fails on the second disk with an error in the log basically saying "an error occurred while extracting files from the package".
I then tried to save the problem disk as a Disk Image but Disk Utility failed citing a rather generic "input/output" error.
Now generally this sounds like a disk problem but I've been advised that this can sometimes be an optical drive problem. My only concern is that I installed Logic about two weeks ago and everything went smoothly and now, after someone has faffed around putting a new HD into the tightly packed internals of my iMac, one of the disk doesn't work.
I don't have my original install disk for my computer so to the best of my knowledge the Apple Hardware Test is a no-go. Does anyone have any suggestions?
Cheers,
Rich

It'll tell you that the drive is doing what it should :-) if the offending disc continues to play up my only advise is to try and clone it to a disc image using Disc Utility and burning the image if successful to new disc. Good Luck :-)

The device "EHCI Root Hub Simulation" @ 0xfd000000 has caused an overcurren

I Have the problem with my usb port
When My Mac reboot the system in the log read this message
USB Notification: The device "EHCI Root Hub Simulation" @ 0xfd000000 has caused an overcurrent condition. The hub it is attached to has been disabled
I can disable this message because the USB Port work correctly

Can you tell which USB is missing in System Profiler>Hardware?USB?
Are all USB devices unplugged?
Have you tried Resetting MacBook and MacBook Pro System Management Controller (SMC)...
http://docs.info.apple.com/article.html?artnum=303319

Open Hub transporting problems

Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've looked at all the SAP Notes, but they reffer to the earlier patch levels...
And other problem, is that it's OK in DEV system but in QUALITY system, when you launch a DTP it gives us a dumb with ASSIGN_TYPE_ERROR
Any ideas??

My destination path on the DEV box is simply the following (identified by BID in the following path):
D:\usr\sap\BID\DVEBMGS00\work
And when I locate the un-activated open hub on the QA box, the BID is already changed to BIQ, but the server name box/field is empty....
I am going to try with the object changebility option, btw, is there any documentation on how to change these objects that are marked with object changebility on the QA box (provided that we can not manually change anything on the QA box)...
Anyways, I think my problem is with the server name conversion from "abc-bi-dev" to "abc-bi-qa"....!!!
Also, please note the RSBFILE entry for this object in the QA box has the "btcsrvname" as blank...
Do you think there is any additional setting that needs to be done on the QA box to do this translation (from "abc-bi-dev" to "abc-bi-qa")?
The only two setup we have done as far as the BI is concerned is at the "Tools-> Conversion of logical system name"....where you only put the conversion for client name mapping from dev to qa and local file system mapping from dev to qa.
So, is there anything else to map the host name (from "abc-bi-dev" to "abc-bi-qa") either at BI perspective or Basis/NetWeaver perspective?
Thanks a lot...
~Sabuj.
Edited by: Sabuj Haque on Feb 1, 2009 1:11 PM
Edited by: Sabuj Haque on Feb 1, 2009 5:34 PM

Fresco Logic xHC1 (USB3) Root Hub driver problem Code 31

Similar Messages

Maybe you are looking for