Fresh fonts

Is there any way to update fonts that I've just loaded using
a font management application? Currently, I am restarting Flash
each time I load new fonts in order for them to be recognized by
Flash. Is this a "feature" of Flash and if so, is there a
work-around?
Thanks!

Prepare to love me - (OS X 10.4.8)
1. Restart your Mac in Safe mode (hold down shift key
following startup chime 'til grey apple/loader comes up).
2. (probably not at all necessary - just a little voodoo -
it's what I did so you may want to too). Start Flash, check out
your font list now - very limited. (Only system fonts show, the
rest are disabled - as a part of starting in Safe mode)
3. Restart as normal - your font cache is cleared, and
recreated.
victory is yours.
Urami - please refrain from commenting unless you know you're
sure - it's a huge pain to be led astray... just a friendly
fyi

Similar Messages

  • Major Font Problems in Snow Leopard!

    Snow Leopard creates serious font problems in Apple software (iWeb & Keynote in particular) but no problems whatsoever that I've found in any Adobe software (InDesign, Illustrator, PhotoShop). What it's doing is screwing up the line spacing... essentially adding a lot of "leading" for some fonts, reducing it for others. Completely screws up my presentations and web pages. Please HELP!!!

    I am also having this exact issue. I've been using a large set of mandatory fonts that our prepress production department uses. There are 1000 fonts we always have installed. We've all been using them since 1998 with no issues at all all the way through Leopard. We have tens of thousands of documents that use these fonts, so getting rid of some is NOT a solution for me.
    There have been no problems up until now.
    After installing Snow Leopard, and even after upgrading it to 10.6.1, there are many fonts missing when these documents are opened in QuarkXPress. We've been using Quark 3.3, 4, 5, 6, all the way through 8.1 with no issues with these fonts until now.
    Currently we're running Leopard, and QuarkXPress 8.1 with no font issues. I was forced to revert my machine back to Leopard after installing Snow Leopard yesterday, because of these seemingly unresolvable font issues.
    In Snow Leopard, the fonts we've been using are indeed left in the Fonts folder untouched, but Snow Leopard doesn't seem to list many of the Bitstream brand Postscript fonts in our collection. Quark thinks they are missing. We even tried taking a fresh Font folder from one of our Leopard machines and replaced the Snow Leopard Fonts folder with it... no difference.
    We tried emptying all caches, reinstalling Quark 8, reloading the fonts... nothing works except reverting the whole system back to Leopard.
    Please help. We'd love to use Snow Leopard, as it does appear a lot faster than Leopard. But, unless this font issue is fixed, we'll never be able to upgrade again, as we are formally locked in to using our current font set.

  • UPC fonts in crystal runtime reset after fresh logging into SAP B1 desktop client?

    Dear Experts,
    I have a client who has SAP version: Business One 8.82 (8.82.069) PL: 06 Hotfix2 and Crystal Reports version: 12.1.0.892 Product Type: Full.
    They have a shipping report that is printed from production module. They needed UPC barcodes on the report. The achieved that through IDAutomation Fonts. The crystal report uses the IDAutomation Function that takes the field and converts and the font is IDAutomation Font that shows the fields are barcodes.
    This repeated works when logged into SAP server using specific id.
    IDAutionation is installed on SAP Server.
    Here is the problem?
    The shipping users have a desktop which has SAP B1 client. That desktop also has IDAutomation fonts installed.
    Shipping personnel logs into SAP B1 with the same id that worked on SAP Server, the report prints okay just the first time after it was saved in SAP Server through crystal report edit and save. Next time they log out of SAP client and log back in with same shipper ID, the report does not pick up the UPC IDAutionation fonts. It comes out as some stange text.
    The fonts are present in control panel fonts on both server and desktop.
    I called IDAutiomation support, they could not help besides saying, put the fonts on both server and client, which I have already done. He also said, there were crystal report runtime issues with fonts?
    Could someone help me out here. What am I missing? I even tried installing full crystal report on the desktop and it did not get resolved. Customer is quite desperate to get this resolved.
    Thank you,
    Syed

    After removing every xf86-video-* package except  xf86-video-nouveau, xf86-video-vesa and  xf86-video-nv plus installing nouveau-dri and rebooting, it works. Thanks karol!

  • Fresh install of Firefox not displaying any fonts in the menues or web pages how do I fix this?

    completely uninstalled priviouse version of Firefox and just intalled Firefox 13.0.1. it doesn't display any fonts not on web pages and not within the Firefox menu structure.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • How to freshly install original fonts?

    We seem to be having a problem with Boris 3D crashing still. We came to the conclusion it is a curupt font. Is there anyway to load the original fonts back into the font folder without reformatting?

    New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
    If we use the forums properly they will work well...

  • Can you help me with FontExplorer font activation problems?

    Anyone know how to solve a font activation problem I am having with FontExplorer 4.2? I am on a new mac with new fonts, I am using Maverick with Adobe CS6. With my new mac I bought the latest version of FontExporer Pro X 4.2. This program is having trouble with font activation in all my Adoble suite apps including Indesign. Here is what I am seeing:
    1. The font activates, but the Adobe app does not recognize that it is active. If I go back to Font Explorer and deactivate manually, then re-activate manually. The adobe app might then recognize it. Sometimes it still doesn't. But this does not stay permanently, as soon as I do a restart I have to go through this process again. I see this more often with the User system fonts, but a few times with my regular fonts.
    2. Other times, such as in Indesign, I go to open the file and the file stalls and doesn’t progress while it is trying to activate the fonts.
    3. Another time I have seen after an illustrator file is opened the fonts aren't recognized as being opened and the text goes blank on the page.
    4. In all adobe apps, if I go to use "replace font" on the missing fonts (even though they are turned on) the "replace font" menu only shows the basic system fonts, it won't show me the other fonts turned on.
    I have seen these issues with both formerly created files and fresh new files.
    I have tried the following based on feedback from Font Explorer staff:
    Refresh your Spotlight database
    1. Quit all applications other than FontExplorer X
    2. Choose Tools > Refresh Spotlight Database
    Clean your font caches
    1. Quit all applications other than FontExplorer X 2. Choose Tools > Clean Application Font Caches (check all available checkboxes)
    3. Choose Tools > Clean System Font Caches (requires restart)
    Still after trying this multiple times, the errors continue and even get more random.
    I have also tried this based on their feedback:
    go to FONTEXPLORER X PRO -> PREFERENCES -> ADVANCED and make sure that "Automatically deactivate fonts which have not been activated by the system" is NOT set to never.
    Then click on TOOLS and clean all font caches. Then reboot the system.
    The auto-activation is using a new Apple technology (called Core Text), which unfortunately does not work correctly with some of the Adobe and Quark applications when keeping the fonts permanently activated. We are currently working on an update, and the next version of FontExplorer X Pro will fix this issue.
    This has also not work. Can anyone help me?

    Here is the official work-around for this problem.
    1. Locate "FontExplorer X Pro.app" in Applications
    2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
    3. Navigate to /Contents/Helpers/
    4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
    Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

  • Fresh Installation Boot Errors

    I'm new to trying to work with Solaris 10, and to a lot of Solaris in general, so while I'd normally be happy to do a lot of reading (and have tried searching for answers on google a good deal already), I'm having a problem after a fresh installation of Solaris 10 on a Sparc T3-1 server that I'm hoping someone can point me in the right direction to solve.
    During the install I told the text installer I wanted to do a ZFS installation using both of my disks (only 2) in a mirrored configuration. I selected the default set of core system packages.
    After the install seemed to be done and the system rebooted, I'm getting the following when it comes up:
    Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5000c5003a04f911,0:a File and args:
    SunOS Release 5.10 Version Generic_142909-17 64-bit
    Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
    Failed to plumb IPv4 interface(s): igb0
    Jul 7 12:12:34 svc.startd[9]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.
    Jul 7 12:12:34 svc.startd[9]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
    Hostname: tempdb
    Loading smf(5) service descriptions: 1/136
    WARNING: svccfg import /var/svc/manifest/application/management/sma.xml failed
    2/136
    WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
    3/136
    WARNING: svccfg import /var/svc/manifest/application/management/seaport.xml failed
    followed by another 133 lines with similar failures, followed by:
    svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
    WARNING: svccfg apply /var/svc/profile/generic.xml failed
    WARNING: svccfg apply /var/svc/profile/platform.xml failed
    Requesting System Maintenance Mode
    (See /lib/svc/share/README for more information.)
    Console login service(s) cannot run
    Root password for system maintenance (control-d to bypass): Reading ZFS config: done.
    Mounting ZFS filesystems: (6/6)
    After doing a new install off of the install media (cd) I would have expected the system to be able to boot without errors, but obviously I've missed something or done something wrong, and I'm hoping that someone can point me in the right direction for figuring out what that is and fixing it.
    I'm happy to provide any other details if there are questions.

    I do see a few messages in the installation log that give me concern. The first is:
    *Creating and checking file systems
    - Creating rpool/ROOT/rdata dataset
    - Creating dataset rpool/ROOT/rdata/var
    libshare SMF initialization problem: entity not found
    libshare SMF initialization problem: entity not found*
    There are also quite a few instances where a PKG installation says something like this:
    *Installation of <SUNWcnetr> was successful.
    pkgadd: ERROR: PKG parameter is not defined in <þëØ>
    346 blocks*
    or
    *Installation of <SUNWj5dvx> was successful.
    pkgadd: ERROR: PKG parameter is not defined in <þëØ>
    pkgadd: ERROR: PKG parameter is not defined in <þëØ>
    7153 blocks
    pkgadd: ERROR: class action script did not complete successfully
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.dir> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.dir>failed
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
    pathname does not exist
    ailed
    pathname does not exist
    pkgadd: ERROR: class action script did not complete successfully
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.all> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.alias.all> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.alias.all> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.alias.all> failed
    pathname does not exist
    Installation of <SUNWaspell-en-share> was successful.
    14501 blocks
    pkgadd: ERROR: class action script did not complete successfully
    ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/75dpi/fonts.dir> failed
    pathname does not exist
    ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/TTbitmaps/fonts.dir> failed
    pathname does not exist
    Can't open ./fonts.dir
    Can't open ./fonts.dir*
    There are also a few that say:
    Reboot client to install driver.
    The installer did seem to reboot at the end. Does the installer handle those 'reboot client' cases itself?

  • Fonts do not show up on websites and mail

    Hi everyone,
    This is my first time posting here and I have been searching around the web like crazy. I am also somewhat of a competent person with computers so I have already tried to figure things out myself.
    Essentially what is happen is flash sites most will come up but the words will only show up as A with a square around it. now it is tolerable in google chrome, but I cant even read google in safari. Another issue is that certain emails will come up completely as the A square's.
    Things I have done already, first i though it might have been just flash, so I completly uninstalled it with appcleaner, and reinstalled it. Then I used , Disk Utility to rebuild and repair my disk. Still nothing. I even used disk warrior 4.3 to do a complete rebuild of the disk.  Nothing still.
    So after that I decided to take all the variables out of the equation so I installed lion on a small pocket harddrive that has 50gb. Cleaned it out and after the install I updated lion and installed the most recent flash. and even on a Fresh install still no luck.
    If anyone has any suggestions please let me know, also if you are confused on the font I am seeing, please just leave an email and I can send you a PDF of what I see in email as well as, a PDF print of a website.
    Sincerely,
    Marc

    Normally the ftp programs would be automatically set to UTF-8.
    If that were always true, the question-mark problem would never arise here, but it still does. One reason is that there are people who still use Fetch 4, which is set to ISO-8859-1 unless you uncheck the box "Translate ISO Characters" as explained in my note.

  • Text caption changes font/colour/size

    Hi
    The Recording Defaults for the Text Caption in the prferences has not been altered.
    On some slides I need to add a text caption.
    I'm finding that sometimes when I click to add a Text Caption the font, colour and size is different to what the default settings are. The default is Arial, 12, #0000FF.
    When I manually add a text caption it'll show as System, 10 and black.
    Has anyone come across this before?  Is there a way to stop it.  It's really annoying and a time waster to have to manually change the font, size and colour.  And you have to be on your guard.  It's not every time I manually add a text caption, just sometimes.  It's intermittent.
    Thanks
    Anita

    Hi there
    The name will vary from version to version.
    Captivate_v10.dat
    Captivate_v20.dat
    Captivate_v30.dat
    Captivate_v40.dat
    The location also varies. For me, it is:
    D:\Documents and Settings\Rick\Application Data\Adobe\Adobe Captivate
    As you can see, D is my drive letter. Yours will likely be C. My name is Rick and is how I log in. Yours will be different. Also, the "Application Data" folder is likely to be hidden from your view unless you adjust Windows to show it to you. And all of this is likely in a different location if you are using Vista or Windows 7. I'm using XP Pro.
    Note that you cannot edit this file. Captivate does that internally. About all you are able to do is to close Captvate and delete or rename it. Captivate will then cook up a fresh one when it starts up and cannot locate it.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Problem with font in terminal.app

    Hello all
    I tried to use the font Inconsolata (downloadable from http://www.levien.com/type/myfonts/inconsolata.html) with the terminal.app. Prior to the update to snow leopard everything was alright. But now this font doesn't render anymore in the terminal.app (although it worked once till the next restart also under snow leopard!). Strange thing is, the font works absolutely normal in all other apps (e.g. macvim oder texteditor). So the font seems to be ok. But why does the font not work any more in the terminal.app? Is there a special font-cache for the terminal? I already tried to delete the user and the system font cache.
    A picture might help to understand the problem:
    http://dl.dropbox.com/u/11881979/Bildschirmfoto%202010-09-27%20um%2021.54.47.png
    Some hints on how to remedy this problem?
    Greetings
    Jerri

    That is very strange. OpenType was the format that had the least issues as Apple worked out the early bugs in the complete 64 bit rewrite of the font engine in Snow Leopard. Type 1 PostScript was where the majority of the trouble was.
    As I noted above, I had no trouble with the font, so can only assume there's some sort of issue with your system. At least the TrueType version works.
    The only thing not done was reinstalling the OS. If you want to take the time to try that, back up the drive and run the OS X installer from the desktop. That will put a fresh copy of OS X on the drive while keeping all of your third party apps, preferences and such intact. Then apply all available updates.

  • Why is Mavericks running so slowly after a fresh install on my Macbook Pro?

    I have a 13-inch, Early 2011 Macbook Pro.
    Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
    I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
    Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
    Any help is greatly appreciated!
    Here is the Etrecheck output:
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        disk0s2 (disk0s2) <not mounted>: 319.21 GB
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 disk2 : (8.09 GB)
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. iPhone
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
              [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
              [System] cx.pow.firewall.plist 3rd-Party support link
    Launch Agents:
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
              [System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
              [not loaded] cx.pow.powd.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
              Trusteer Endpoint Protection  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Epson Printer Utility 4:          Version: 9.17 - SDK 10.5 3rd-Party support link
                        /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Smultron:          Version: 3.8.4 - SDK 10.0 3rd-Party support link
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
              Destinations:
                        Time Machine Backups [Local] (Last used)
                        Total size: 412.18 GB
                        Total number of backups: 4
                        Oldest backup: 2014-01-07 12:40:04 +0000
                        Last backup: 2014-01-20 17:50:35 +0000
                        Size of backup disk: Excellent
                                  Backup size 412.18 GB > (Disk size 0 B X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  17%          Mail
                   8%          mtmd
                   5%          mds_stores
                   3%          mds
                   2%          iTunes
    Top Processes by Memory:
              217 MB          Mail
              184 MB          com.apple.WebKit.WebContent
              139 MB          softwareupdated
              115 MB          mds_stores
              106 MB          Google Chrome
    Virtual Memory Information:
              186 MB          Free RAM
              1.21 GB          Active RAM
              983 MB          Inactive RAM
              1.07 GB          Wired RAM
              7.85 GB          Page-ins
              326 MB          Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
    exec sh
    and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
    If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
    The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Can't login after fresh installing gnome using gdm 3.2 [SOLVED]

    I don't know if this topic was already solved, I hope someone can help me about this. I have a fresh install of arch linux (just yesterday) and installed gnome and gnome-extra packages. As usual, I go with the procedure of editing my .xinitrc (exec ck-launch-session dbus-launch gnome-session), rc.conf (...dbus networkmanager...), inittab (runlvl 5, x:5......gdm). After a reboot, gdm screen appeared, I can't find my account, then there were two choices, "Sign in" and "Not listed..."). I clicked Not listed, then entered my user and password, after that, it responded: Authentication failure/failed... or something like that. I tried it again and it's the same. Temporarily, I'm using startx or slim (depends on my mood). Can anyone help me?
    here's my gdm's 0.log and 0-greeter.log respectively:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
    X.Org X Server 1.11.1.901 (1.11.2 RC 1)
    Release Date: 2011-10-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux espionage 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686
    Kernel command line: root=/dev/disk/by-uuid/9645b27b-41ee-461a-b4f0-f5ba1794542c ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 24 October 2011 12:26:09PM
    Current version of pixman: 0.22.2
    Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 19:43:23 2011
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:0:2:0) 8086:27a2:1025:012f rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:27a6:1025:012f rev 3, Mem @ 0xdc180000/524288
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (==) Matched intel as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.16.0
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.11.1, module version = 2.3.0
    (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 0.4.2
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    (II) VESA: driver for VESA chipsets: vesa
    (II) FBDEV: driver for framebuffer: fbdev
    (++) using VT number 7
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (WW) Falling back to old probe method for vesa
    (WW) Falling back to old probe method for fbdev
    (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 0.0.2
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (**) intel(0): Relaxed fencing disabled
    (**) intel(0): Wait on SwapBuffers? enabled
    (**) intel(0): Triple buffering? enabled
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): 3D buffers tiled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): EDID for output LVDS1
    (II) intel(0): Manufacturer: SEC Model: 4442 Serial#: 0
    (II) intel(0): Year: 2006 Week: 0
    (II) intel(0): EDID Version: 1.3
    (II) intel(0): Digital Display Input
    (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
    (II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
    (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LTN141W3-L01
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3424400000000
    (II) intel(0): 00100103801e13780a87f594574f8c27
    (II) intel(0): 27505400000001010101010101010101
    (II) intel(0): 010101010101ee1a0080502010300c40
    (II) intel(0): 33002fbe100000190000000f00000000
    (II) intel(0): 00000000002387026400000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c544e31343157332d4c30310a0064
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output LVDS1
    (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output TV1
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) intel(0): Kernel page flipping support detected, enabling
    (**) intel(0): Display dimensions: (300, 190) mm
    (**) intel(0): DPI set to (108, 106)
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (II) Unloading vesa
    (II) Unloading fbdev
    (II) Unloading fbdevhw
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i915
    (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (II) put_image
    (II) get_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i915
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.6.0
    (II) Using input driver 'evdev' for 'Power Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (--) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (--) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event2"
    (--) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
    (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event9"
    (--) A4TECH USB Device: Found 1 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found absolute axes
    (--) A4TECH USB Device: Found x and y absolute axes
    (--) A4TECH USB Device: Found keys
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Configuring as keyboard
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 9)
    (EE) A4TECH USB Device: failed to initialize for relative axes.
    (WW) A4TECH USB Device: found 37 axes, limiting to 36.
    (II) A4TECH USB Device: initialized for absolute axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event10)
    (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event10"
    (--) A4TECH USB Device: Found 20 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found x and y relative axes
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 10)
    (II) A4TECH USB Device: initialized for relative axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event11)
    (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Acer CrystalEye webcam: always reports core events
    (**) Acer CrystalEye webcam: Device: "/dev/input/event11"
    (--) Acer CrystalEye webcam: Found keys
    (II) Acer CrystalEye webcam: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.11.0, module version = 1.5.0
    (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
    (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver/identifier specified (ignoring)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Unloading synaptics
    (II) AT Translated Set 2 keyboard: Close
    (II) Unloading evdev
    (II) Acer CrystalEye webcam: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) Sleep Button: Close
    (II) Unloading evdev
    (II) Video Bus: Close
    (II) Unloading evdev
    (II) Power Button: Close
    (II) Unloading evdev
    Server terminated successfully (0). Closing log file.
    gnome-session[1036]: DEBUG(+): Enabling debugging
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/espionage:@/tmp/.ICE-unix/1036,unix/espionage:/tmp/.ICE-unix/1036
    gnome-session[1036]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: setting client store 0x9fe2638
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1036]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1036]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1036]: DEBUG(+): fill: *** Adding required components
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1036]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1036]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1036]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1036]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1036]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1046
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581614780600000010360002 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1118
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient 10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226648300000010360001 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1046
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10acccb988624d95d5131971581226572800000010360000
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1133
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: New client '0xa00d0c0 []'
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Initializing client 0xa00d0c0 []
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 []' received RegisterClient(10acccb988624d95d5131971581226572800000010360000)
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226572800000010360000 to session
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Set properties from client '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: ProcessID = '1133'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: connecting to address: unix:abstract=/tmp/gdm-greeter-bvcleLaw,guid=ee40278e3f4d9eb0fe19bee0000000f2
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling GetDisplayId
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Creating proxy for /org/gnome/DisplayManager/Display1
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    JS LOG: GNOME Shell started at Thu Oct 27 2011 19:43:43 GMT+0800 (PHT)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling BeginVerification
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=InfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received InfoQuery (gdm-password, Username:)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SelectedUserChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SelectedUserChanged (vic)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SecretInfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SecretInfoQuery (gdm-password, Password: )
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Problem
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Problem (gdm-password, Authentication failure)
    JS LOG: error: Authentication failure
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=ConversationStopped
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received ConversationStopped (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling Cancel
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x8062560
    gnome-session[1036]: DEBUG(+): Got callback for signal 15
    gnome-session[1036]: DEBUG(+): GsmManager: Logout called
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.7
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, 9, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, c, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]')
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011e48
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received CloseConnection
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa00d0c0
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000])
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011cc8
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1036]: DEBUG(+): Unreffing manager
    gnome-session[1036]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045408
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045480
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1046): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Last edited by vic (2011-10-27 13:51:21)

    wonder wrote:
    vic wrote:
    wonder wrote:what's your user id?
    when asked for uuid/uid?... I put 100. I thought any random number would do...
    look in /etc/pam.d/gdm-password
    in arch and in general >= 1000 are  normal users, < 1000 system users
    is that how it works? can i change it from 100 to 1000 or just make a new one?
    anyways i'll look to it.

  • Fonts isn't showing up in Font Book but does in some apps

    I have a particular font that I use in a number of applications - Peignot. In fact it shows up in Text Edit, Mail, and Business Card Composer, to name a few. But it doesn't appear in Font Book, and more to the point, it doesn't show up in Word or any of the Adobe applications. It's clearly in my user Fonts folder and has been for months. I've only noticed the problem because I've tried to use this font in Illustrator. Can anyone tell me how this font can be present for some apps but not others? And is obviously installed but doesn't show up in Font Book?

    I just needed to reinstall a fresh version

  • In Earthlink WebMail when inserting an email address or weblink, the text no longer turns blue and underlines, and I can't change font colors. IE Works.

    Whenever I try to insert an email address or a link to a website, I no longer get the automatic hyperlink (turning blue and underlining). Also if I try to change the font color on some text it either doesn't change from black or it changes to a different color. (If I try to change to red, I get dark green; change to a bright green, I get dark red; change to blue or yellow, I get black).
    I tried removing and reinstalling Firefox to no avail. Earthlink is clueless.
    This all works properly using Internet Explorer.

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode."
    If those features work correctly, this points to one of your extensions or custom settings as the problem.
    To also disable plugins, you can use this page:
    orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
    Any change?

  • I need a font book factory reset & a clean slate

    My font book is is a mess!  I have duplicate fonts in about 4 different directories (my fault) and want a fresh start.  I did an "export" of my fonts but I am unsure how to do a factory reset.  I've read the Font Management in OS X doc but am unclear if clearing the cache will bring me back to just the basic system fonts or only clears the history.
    Do I need to go in and delete ("file ----> remove font") the fonts in font book one by one and THEN clear the cache before reinstalling the ones I want in the ONE directory folder where I want them to live?  (lesson learned).  I have 1200 (not including the duplicates) fonts that I need to sift through and am looking for the fastest way to do this without losing the key system fonts for Mac, Office 2011 and Adobe CS5 Creative Suite.
    Is that amount of installed fonts still manageable with font book or should I be looking at a different font management solultion?  I can't answer that for myself until I make it manageable with only ONE copy of each font   
    Thanks in advance for your help!  I promise that I've read through this site and have been googling all day but haven't been sure about resetting the it all back to square one 
    Tara

    There isn't an easy, singular answer to your question, though it would be fairly straightforward if it weren't for Office. I am curious how you arrived at 4 directories of fonts. There are only three Fonts folders OS X looks at. The ones in the System folder, the main Library folder, and the one in the active user account. Since you shouldn't even be looking in the System folder (if you don't know what you're doing), the only two places you should have any fonts you've added would be the main Library and your account.
    Anyway, start by launching Font Book. Delete any Font sets or Library sets you have created. Close Font Book. Create a new folder on the desktop. Call it "mine". Anything you want really, just so it refers to the fonts in your user account. Go to the Fonts folder in your user account and move all fonts out of that folder to the new one on the desktop. Create another new folder on the desktop named "lib". Open the /Library/Fonts/ folder and move all fonts into the second new folder. Both the /Library/Fonts/ folder, and the Fonts folder in your user account should be empty.
    Follow the instructions at the bottom of Font Management in OS X to restore all fonts from the Snow Leopard DVD. You will be using Pacifist to restore both the System and Library fonts. When you're done, your fonts will be back to the way the were when you first installed OS X.
    From the desktop folder you named "lib". Move Hoefler Text.ttc and STHeiti Medium.ttc to the /Library/Fonts/ folder. Replace the versions you just restored with these newer versions. They were updated in 10.6.5.
    Office 2011 installs many newer versions of fonts OS X comes with. Move these fonts from the 'lib" folder into the /Library/Fonts/ folder so you again replace the ones you just restored.
    Arial.ttf
    Arial Italic.ttf
    Arial Bold.ttf
    Arial Bold Italic.ttf
    Brush Script.ttf
    Times New Roman.ttf
    Times New Roman Italic.ttf
    Times New Roman Bold.ttf
    Times New Roman Bold Italic.ttf
    Verdana.ttf
    Verdana Italic.ttf
    Verdana Bold.ttf
    Verdana Bold Italic.ttf
    Wingdings.ttf
    Wingdings 2.ttf
    Wingdings 3.ttf
    Here's where it gets a bit trickier. Office 2011 also installs a number of old fonts which conflict with the newer .ttf OpenType fonts. Delete these from the "lib" folder on your desktop. Note that they do not have a file extension.
    Andale Mono
    Arial Black
    Arial Narrow
    Arial Rounded Bold
    Comic Sans MS
    Georgia
    Impact
    Tahoma
    Trebuchet MS
    Without being able to see what you have left in the "lib" folder, I can't easily say what you can move back into the /Library/Fonts/ folder. So I'll list everything else Office 2011 installs that you can move back in. Office uses many of these for its supplied templates. Cambria is the default font family for Word.
    Abadi MT Condensed Extra Bold
    Abadi MT Condensed Light
    Baskerville Old Face
    Batang.ttf
    Bauhaus 93
    Bell MT
    Bernard MT Condensed
    Book Antiqua
    Bookman Old Style
    Bookshelf Symbol 7.ttf
    Braggadocio
    Britannic Bold
    Calibri Bold Italic.ttf
    Calibri Bold.ttf
    Calibri Italic.ttf
    Calibri.ttf
    Calisto MT
    Cambria Bold Italic.ttf
    Cambria Bold.ttf
    Cambria Italic.ttf
    Cambria Math.ttf
    Cambria.ttf
    Candara Bold Italic.ttf
    Candara Bold.ttf
    Candara Italic.ttf
    Candara.ttf
    Century
    Century Gothic
    Century Schoolbook
    Colonna
    Consolas Bold Italic.ttf
    Consolas Bold.ttf
    Consolas Italic.ttf
    Consolas.ttf
    Constantia Bold Italic.ttf
    Constantia Bold.ttf
    Constantia Italic.ttf
    Constantia.ttf
    Cooper Black
    Copperplate Gothic Bold
    Copperplate Gothic Light
    Corbel Bold Italic.ttf
    Corbel Bold.ttf
    Corbel Italic.ttf
    Corbel.ttf
    Curlz MT
    Desdemona
    Edwardian Script ITC
    Engravers MT
    Eurostile
    Footlight Light
    Franklin Gothic Book Italic.ttf
    Franklin Gothic Book.ttf
    Franklin Gothic Medium Italic.ttf
    Franklin Gothic Medium.ttf
    Gabriola.ttf
    Garamond
    Gill Sans MT Bold Italic.ttf
    Gill Sans MT Bold.ttf
    Gill Sans MT Italic.ttf
    Gill Sans MT.ttf
    Gill Sans Ultra Bold
    Gloucester MT Extra Condensed
    Goudy Old Style
    Gulim.ttf
    Haettenschweiler
    Harrington
    Imprint MT Shadow
    Kino
    Lucida Blackletter
    Lucida Bright
    Lucida Calligraphy
    Lucida Console.ttf
    Lucida Fax
    Lucida Handwriting
    Lucida Sans
    Lucida Sans Typewriter
    Lucida Sans Unicode.ttf
    Marlett.ttf
    Matura Script Capitals
    Meiryo Bold Italic.ttf
    Meiryo Bold.ttf
    Meiryo Italic.ttf
    Meiryo.ttf
    Mistral
    Modern No. 20
    Monotype Corsiva
    Monotype Sorts
    MS Gothic.ttf
    MS Mincho.ttf
    MS PGothic.ttf
    MS PMincho.ttf
    MS Reference Sans Serif.ttf
    MS Reference Specialty.ttf
    MT Extra
    News Gothic MT
    Onyx
    Palatino Linotype Bold Italic.ttf
    Palatino Linotype Bold.ttf
    Palatino Linotype Italic.ttf
    Palatino Linotype.ttf
    Perpetua Bold Italic.ttf
    Perpetua Bold.ttf
    Perpetua Italic.ttf
    Perpetua Titling MT
    Perpetua.ttf
    Playbill
    PMingLiU.ttf
    Rockwell
    Rockwell Extra Bold
    SimSun.ttf
    Stencil
    Tw Cen MT Bold Italic.ttf
    Tw Cen MT Bold.ttf
    Tw Cen MT Italic.ttf
    Tw Cen MT.ttf
    Wide Latin
    Anything you have left in the "lib" folder on your desktop will either be duplicates, or fonts installed by other third party apps. That will essentially be true of any fonts you moved out of your user account. I can't tell you which, if any of these, would need to be moved back in. For now, combine the two into a single folder and store them away anywhere not in any of the three Fonts on the hard drive. There will be a bunch of them as CS5 installs a slew of fonts. None of which it needs to operate.
    That's as far as I can help with the fonts themselves.
    Now open Disk Utility and run a Repair Permissions on your startup drive. Moving the fonts around will cause them to have permissions OS X doesn't like. Mainly just because you moved them back into the /Library/Fonts/ folder and it will want to change the permissions to OS X as the owner simply because of where they are.
    Last few things to do.
    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
    Next to take care of the System's font cache files.
    Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
    Last step when back at the desktop. Launch Font Book so it can create a new database based on the fonts currently in the drive's three Fonts folders.
    There should be no duplicates. Everything OS X and Office installs will be available.

Maybe you are looking for