Fresh Install 10.1.3.4 - Windows Server 2003 x64; - Oracle Client question

Hi,
as preparation for a server migration I have been going through all of the steps to perform a fresh install of OBIEE.
I have worked through the 'Quick Installation Guide', but referring to the full Install and Configuration Guide, but I have come up to an area where I need clarification please....
After using the SAACCT.Oracle.sql script I am now at the step; -
"Using the Oracle Net Configuration tool,create an Oracle Service to the current S_NQ_SCHED database....."
At which point I realised - following through the Quick Installation guide to the letter - I had not installed the Oracle Client Software....
My questions are; -
1. Is the Oracle Client a pre-req which is an 'unwritten' requirement for install of OBIEE - if not how do you create an oracle service to the S_NQ_SCHED database?
2. The full guide says 'IF' (hence the reason I ask the above) you install an Oracle Client alongside the OBIEE software then you must do it first as it can change java versions - I haven't - do I have to scrap my entire install or is there a 'fix' for putting the client on after the event
3. The guide points me at the 'System Requirements and Supported Platforms' document to know which clients are compatible with OBIEE - I can see nothing in the guide on this - can anyone advise please?
thanks for your help,
Robert.

Hi Paul,
I am not seeing the network/tools combination of folders anywhere, nor do I have shortcuts that you describe, is the client definitely part and parcel of the 10.1.3.4 install - can you give me one specific executable to search for - preferably the Net Configuration Assistant?
thanks again,
Robert.

Similar Messages

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Install Problem ECC 5.0\Windows server 2003(SP2)\oracle 9.2.1.0

Dear Friends
I am Saikumar from Hyderabad
I hasve been trying to install ecc 5.0 on my System but it failed more than 4 times now.
My PC Config
Intel Desktopboard S975XBX 2
8GB Ram
500 GB HDD
I have done all the prerequisites like setting the swap Space to 1GB + 3 * RAM & Updated the Hosts File
Installed Java & Updated the envirment variables
I have Installed Oracle 9.2.1.0 & Updated it with the patch to 9.2.6.0
I am able to Install Central Instance successfully
While Installing Database Instance,It is getting stopped & Terminated during the process of "Creating Database" In the bottom it is showing Extracting SAP Oracle file 12
At that point it is getting terminated everytime.
I am not getting what the problem is????
Pls help me
Thank you
Saikumar

*This is the sapinst.log file*
INFO 2008-07-03 00:39:18
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2008-07-03 00:39:18
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2008-07-03 00:39:18
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\q0w9e9r8t7.1.xml.
INFO 2008-07-03 00:39:18
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.1.xml.
INFO 2008-07-03 00:39:18
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/keydb.1.xml.
INFO 2008-07-03 00:39:18
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\keydb.1.xml.
INFO 2008-07-03 00:39:18
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\change.log.
INFO 2008-07-03 00:39:18
Output of change 'user' '/install' is written to the logfile change.log.
WARNING 2008-07-03 00:39:18
Execution of the command "change 'user' '/install'" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2008-07-03 00:39:19
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'SAPECC\Administrator' on host '.'.
PHASE 2008-07-03 00:39:19
Prepare the installation program.
INFO 2008-07-03 00:39:23
Installation start: Thursday, 03 July 2008, 00:39:17; installation directory: E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB; product to be installed: SAP ERP 2004> SAP ECC 5.0 ABAP System> non-Unicode> Install a Database Instance
INFO 2008-07-03 00:40:37
Host operation t_HostInfo_SHARED processed successfully.
INFO 2008-07-03 00:41:31
The 'saploc' share exists in directory 'F:\usr\sap'. Choosing drive F: as the SAP system drive.
INFO[E] 2008-07-03 00:41:47
Unable to get value for environment variable SAPINST_ORA_ALLOW_ASIAN_CHARSETS.
INFO[E] 2008-07-03 00:43:08
Account group="sapecc\SAP_LDAP" does not exist. <#1>
INFO[E] 2008-07-03 00:43:44
Account group="sapecc\dbeccctl" does not exist. <#1>
INFO 2008-07-03 00:45:30
Copying file G:/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-07-03 00:45:30
Copying file G:/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-07-03 00:45:30
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\DBSIZE.XML.
INFO 2008-07-03 00:45:30
File system node G:\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML copied successfully.
INFO 2008-07-03 00:45:30
All file system node operations of table tORA_filecopy processed successfully.
INFO 2008-07-03 00:45:33
Copying file G:/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2008-07-03 00:45:33
Copying file G:/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2008-07-03 00:45:33
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\DDLORA.TPL.
INFO 2008-07-03 00:45:34
File system node G:\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL copied successfully.
INFO 2008-07-03 00:45:34
All file system node operations of table tORA_filecopy processed successfully.
INFO 2008-07-03 00:45:47
Moving file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2008-07-03 00:45:47
Moving file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2008-07-03 00:45:47
Removing file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/orig_ddl_ora_tmp.tpl.
INFO 2008-07-03 00:47:22
Package table created
PHASE 2008-07-03 00:52:40
SAP Web Application Server
PHASE 2008-07-03 00:52:40
Request common parameters of SAP system
PHASE 2008-07-03 00:52:40
Create accounts
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.1.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.1.xml.
INFO 2008-07-03 00:52:40
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\product.1.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.2.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/product.2.xml.
INFO 2008-07-03 00:52:40
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\product.2.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradbpar.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradbpar.1.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradbpar.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradbpar.1.xml.
INFO 2008-07-03 00:52:40
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\oradbpar.1.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/DBSIZE.XML to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/DBSIZE.1.XML.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/DBSIZE.XML to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/DBSIZE.1.XML.
INFO 2008-07-03 00:52:40
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\DBSIZE.1.XML.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/exportcds.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/exportcds.1.xml.
INFO 2008-07-03 00:52:40
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/exportcds.xml to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/exportcds.1.xml.
INFO 2008-07-03 00:52:40
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\exportcds.1.xml.
PHASE 2008-07-03 00:53:44
Request operating system user information
PHASE 2008-07-03 00:53:44
Request operating system user information
PHASE 2008-07-03 00:53:44
Request operating system user information
PHASE 2008-07-03 00:53:45
Request operating system user information
PHASE 2008-07-03 00:53:45
Request operating system user information
PHASE 2008-07-03 00:53:45
Request operating system user information
PHASE 2008-07-03 00:53:46
Request operating system user information
PHASE 2008-07-03 00:53:46
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
PHASE 2008-07-03 00:53:47
Request operating system user information
INFO 2008-07-03 00:53:48
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-4201031851-3450626453-3816366955-500' on host 'sapecc'.
INFO 2008-07-03 00:53:49
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'sapecc\SAPServiceECC' on host 'sapecc'.
INFO 2008-07-03 00:53:49
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'sapecc\eccadm' on host 'sapecc'.
INFO 2008-07-03 00:53:49
All 'tNT_RegistryEntries' table rows evaluated.
INFO 2008-07-03 00:53:51
Switched to user: eccadm.
INFO 2008-07-03 00:53:51
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:52
Switched to user: eccadm.
INFO 2008-07-03 00:53:52
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:52
Switched to user: eccadm.
INFO 2008-07-03 00:53:53
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:53
Switched to user: eccadm.
INFO 2008-07-03 00:53:54
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:54
Switched to user: eccadm.
INFO 2008-07-03 00:53:55
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:55
Switched to user: eccadm.
INFO 2008-07-03 00:53:56
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:57
Switched to user: eccadm.
INFO 2008-07-03 00:53:57
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:58
Switched to user: eccadm.
INFO 2008-07-03 00:53:58
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:53:59
Switched to user: eccadm.
INFO 2008-07-03 00:53:59
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:54:00
Switched to user: eccadm.
INFO 2008-07-03 00:54:00
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:54:01
Switched to user: eccadm.
INFO 2008-07-03 00:54:01
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:54:02
Switched to user: eccadm.
INFO 2008-07-03 00:54:02
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:54:03
Switched to user: eccadm.
INFO 2008-07-03 00:54:03
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
INFO 2008-07-03 00:54:04
Switched to user: eccadm.
INFO 2008-07-03 00:54:04
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
PHASE 2008-07-03 00:54:04
Adapt file system
PHASE 2008-07-03 00:54:05
Prepare check/adapt SAP instance file system
INFO 2008-07-03 00:54:06
File system node F:\usr\sap exists.
INFO 2008-07-03 00:54:06
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap/ECC exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap/tmp exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/data exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/log exists already. Nothing to do.
INFO 2008-07-03 00:54:07
File system node F:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2008-07-03 00:54:07
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-07-03 00:54:08
All file system node operations of table t_SAPComponent_Filesystem_Action_SHARED processed successfully.
INFO 2008-07-03 00:54:08
All NT shares while processing the table 'tNT_SHARE' created successfully.
PHASE 2008-07-03 00:54:09
Extract archives
INFO 2008-07-03 00:54:09
All file system node operations of table t_SAPComponent_Archives_FORMS_SHARED processed successfully.
PHASE 2008-07-03 00:54:10
Extract SAP System kernel archives
INFO 2008-07-03 00:54:12
Copying file F:/usr/sap/ECC/SYS/exe/run/rfcexec.sec to: /rfcexec.sec.
INFO 2008-07-03 00:54:12
Copying file F:/usr/sap/ECC/SYS/exe/run/rfcexec.sec to: /rfcexec.sec.
INFO 2008-07-03 00:54:12
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\SAPMMC.SAR.log.
INFO 2008-07-03 00:54:13
E:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3268.1215025719\sapcar.exe -xvgf G:/erp2000/IM1/NT/I386/MMC/SAPMMC.SAR, -R E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB succeeded. (See output in './SAPMMC.SAR.log'.)
INFO 2008-07-03 00:54:13
While copying node E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/sapmmc.dll to E:\WINDOWS\system32/sapmmc.dll, source is not newer than the target. Nothing to do.
INFO 2008-07-03 00:54:13
While copying node E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/sapmmcada.dll to E:\WINDOWS\system32/sapmmcada.dll, source is not newer than the target. Nothing to do.
INFO 2008-07-03 00:54:13
While copying node E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/sapmmcdb6.dll to E:\WINDOWS\system32/sapmmcdb6.dll, source is not newer than the target. Nothing to do.
INFO 2008-07-03 00:54:13
While copying node E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/sapmmcinf.dll to E:\WINDOWS\system32/sapmmcinf.dll, source is not newer than the target. Nothing to do.
INFO 2008-07-03 00:54:13
While copying node E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/sapmmcms.dll to E:\WINDOWS\system32/sapmmcms.dll, source is not newer than the target. Nothing to do.
INFO 2008-07-03 00:54:13
All file system node operations of table t_SAPComponent_Archives_Copy_SHARED processed successfully.
INFO 2008-07-03 00:54:16
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\DBATOOLS.SAR.log.
INFO 2008-07-03 00:54:16
E:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3268.1215025719\sapcar.exe -xvgf G:/erp2000/IM1/NT\I386\DBATOOLS.SAR, -R F:\usr\sap\ECC\SYS\exe\run succeeded. (See output in './DBATOOLS.SAR.log'.)
INFO 2008-07-03 00:54:17
All 'tNT_RegistryEntries' table rows evaluated.
INFO 2008-07-03 00:54:18
All NT registry entries from the tNT_RegistryEntries table created or updated successfully.
PHASE 2008-07-03 00:54:18
Creating service ports
PHASE 2008-07-03 00:54:18
Generate instance profiles
PHASE 2008-07-03 00:54:18
Create versions of default profile, instance profile and start profile
INFO 2008-07-03 00:54:19
All file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED processed successfully.
INFO 2008-07-03 00:54:20
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/listener.ora to: F:/oracle/ecc92/network/admin/listener.1.ora.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/listener.ora to: F:/oracle/ecc92/network/admin/listener.1.ora.
INFO 2008-07-03 00:54:22
Creating file F:\oracle\ecc92\network\admin\listener.1.ora.
INFO 2008-07-03 00:54:22
Removing file F:/oracle/ecc92/network/admin/listener.ora.
INFO 2008-07-03 00:54:22
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\lsnrctl.log.
INFO 2008-07-03 00:54:22
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:54:22
Output of F:\oracle\ecc92/bin/lsnrctl 'stop' 'LISTENER' is written to the logfile lsnrctl.log.
INFO 2008-07-03 00:54:22
Execution of the command "F:\oracle\ecc92/bin/lsnrctl 'stop' 'LISTENER'" finished with return code 0. Output:
LSNRCTL for 32-bit Windows: Version 9.2.0.8.0 - Production on 03-JUL-2008 00:54:22
Copyright (c) 1991, 2006, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
The command completed successfully
INFO 2008-07-03 00:54:22
Creating file F:\oracle\ecc92\network\admin\listener.ora.
INFO 2008-07-03 00:54:22
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\tnsnames.tpl.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/tnsnames.ora to: F:/oracle/ecc92/network/admin/tnsnames.1.ora.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/tnsnames.ora to: F:/oracle/ecc92/network/admin/tnsnames.1.ora.
INFO 2008-07-03 00:54:22
Creating file F:\oracle\ecc92\network\admin\tnsnames.1.ora.
INFO 2008-07-03 00:54:22
Moving file F:/oracle/ecc92/network/admin/tnsnames.ora to: \s394..2.
INFO 2008-07-03 00:54:22
Moving file E:/s394. to: F:\oracle\ecc92/network/admin/tnsnames.ora.
INFO 2008-07-03 00:54:22
Removing file E:/s394..2.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/sqlnet.ora to: F:/oracle/ecc92/network/admin/sqlnet.1.ora.
INFO 2008-07-03 00:54:22
Copying file F:/oracle/ecc92/network/admin/sqlnet.ora to: F:/oracle/ecc92/network/admin/sqlnet.1.ora.
INFO 2008-07-03 00:54:22
Creating file F:\oracle\ecc92\network\admin\sqlnet.1.ora.
INFO 2008-07-03 00:54:22
Removing file F:/oracle/ecc92/network/admin/sqlnet.ora.
INFO 2008-07-03 00:54:22
Creating file F:\oracle\ecc92\network\admin\sqlnet.ora.
INFO 2008-07-03 00:54:25
All file system node operations of table tORA_DatabaseServerNodes processed successfully.
INFO 2008-07-03 00:54:25
All file system node operations of table tORA_SapdataNodes processed successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\saptrace.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\saptrace with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\saptrace\background.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\saptrace/background with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\saptrace\usertrace.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\saptrace/usertrace with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapreorg.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\sapreorg with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\saparch.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\saparch with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\oraarch.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\oraarch with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapcheck.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\sapcheck with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapbackup.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\sapbackup with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\origlogA.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\origlogA with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\mirrlogA.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\mirrlogA with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\origlogB.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\origlogB with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\mirrlogB.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\mirrlogB with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\cntrl.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\sapdata1\cntrl with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\saparch\cntrl.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\saparch\cntrl with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\origlogA\cntrl.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC\origlogA\cntrl with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
All file system node operations of table tORA_DatabaseServerNodes processed successfully.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1 exists already. Nothing to do.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_2.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_2 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_3.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_3 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_4.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_4 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_5.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_5 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_6.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_6 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_7.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_7 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_8.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_8 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_9.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_9 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_10.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_10 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_11.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_11 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_12.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_12 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_13.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_13 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_14.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_14 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_15.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_15 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_16.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_16 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_17.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_17 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_18.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_18 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_19.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_19 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_20.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_20 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_21.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_21 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_22.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_22 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_23.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_23 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_24.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_24 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_25.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_25 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_26.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_26 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_27.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_27 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_28.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_28 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_29.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_29 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_30.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_30 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc_31.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc_31 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_2.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_2 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_3.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_3 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_4.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_4 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_5.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_5 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_6.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_6 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_7.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_7 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_8.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_8 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_9.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_9 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_10.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_10 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_11.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_11 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_12.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_12 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_13.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_13 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_14.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_14 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_15.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_15 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_16.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_16 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\ecc640_17.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\ecc640_17 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\eccusr_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\eccusr_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\undo_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\undo_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\temp_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\temp_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
Creating directory F:\oracle\ECC\sapdata1\system_1.
INFO 2008-07-03 00:54:26
File system node F:\oracle\ECC/sapdata1\system_1 with type DIRECTORY created successfully.
INFO 2008-07-03 00:54:26
All file system node operations of table tORA_SapdataNodes processed successfully.
INFO 2008-07-03 00:54:27
All file system node operations of table tORA_DatabaseServerNodes processed successfully.
INFO 2008-07-03 00:54:27
All file system node operations of table tORA_SapdataNodes processed successfully.
INFO 2008-07-03 00:54:29
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSIDBASE.ORA to: INITSIDBASE.ORA.
INFO 2008-07-03 00:54:29
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSIDBASE.ORA to: INITSIDBASE.ORA.
INFO 2008-07-03 00:54:29
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\INITSIDBASE.ORA.
INFO 2008-07-03 00:54:29
Creating file F:\oracle\ecc92\database\initECC.ora.
INFO 2008-07-03 00:54:30
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSID920.ORA to: INITSID920.ORA.
INFO 2008-07-03 00:54:30
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSID920.ORA to: INITSID920.ORA.
INFO 2008-07-03 00:54:30
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\INITSID920.ORA.
INFO 2008-07-03 00:54:30
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\INITSID920.ORA.tmp.
INFO 2008-07-03 00:54:30
Copying file F:/oracle/ecc92/database/initECC.ora to: F:/oracle/ecc92/database/initECC.1.ora.
INFO 2008-07-03 00:54:30
Copying file F:/oracle/ecc92/database/initECC.ora to: F:/oracle/ecc92/database/initECC.1.ora.
INFO 2008-07-03 00:54:30
Creating file F:\oracle\ecc92\database\initECC.1.ora.
INFO 2008-07-03 00:54:30
Moving file F:/oracle/ecc92/database/initECC.ora to: \s394.1.2.
INFO 2008-07-03 00:54:30
Moving file E:/s394.1 to: F:\oracle\ecc92/database/initECC.ora.
INFO 2008-07-03 00:54:30
Removing file E:/s394.1.2.
INFO 2008-07-03 00:54:32
Creating file F:\oracle\ecc92\database\initECC.sap.
INFO 2008-07-03 00:54:33
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSID.DBA to: F:\oracle\ecc92/database/initECC.dba.
INFO 2008-07-03 00:54:33
Copying file G:/erp2000/IM1/NT/COMMON/INSTALL/INITSID.DBA to: F:\oracle\ecc92/database/initECC.dba.
INFO 2008-07-03 00:54:33
Creating file F:\oracle\ecc92\database\initECC.dba.
INFO 2008-07-03 00:54:39
Creating directory F:\oracle\ECC\sapdata1\system_1\cntrl.
INFO 2008-07-03 00:54:43
Switched to user: eccadm.
INFO 2008-07-03 00:54:43
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:54:43
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\oradim.log.
INFO 2008-07-03 00:54:43
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:54:43
Output of F:\oracle\ecc92/bin/oradim '-DELETE' '-SID' 'ECC' is written to the logfile oradim.log.
WARNING 2008-07-03 00:54:43
Execution of the command "F:\oracle\ecc92/bin/oradim '-DELETE' '-SID' 'ECC'" finished with return code 10. Output:
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
INFO 2008-07-03 00:54:56
Copying file F:/oracle/ecc92/database/initECC.ora to: F:/oracle/ecc92/database/initECC.2.ora.
INFO 2008-07-03 00:54:56
Copying file F:/oracle/ecc92/database/initECC.ora to: F:/oracle/ecc92/database/initECC.2.ora.
INFO 2008-07-03 00:54:56
Creating file F:\oracle\ecc92\database\initECC.2.ora.
INFO 2008-07-03 00:54:56
Moving file F:/oracle/ecc92/database/initECC.ora to: \s394.2.2.
INFO 2008-07-03 00:54:56
Moving file E:/s394.2 to: F:\oracle\ecc92/database/initECC.ora.
INFO 2008-07-03 00:54:56
Removing file E:/s394.2.2.
INFO 2008-07-03 00:54:57
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradim.log to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradim.1.log.
INFO 2008-07-03 00:54:57
Copying file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradim.log to: E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradim.1.log.
INFO 2008-07-03 00:54:57
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\oradim.1.log.
INFO 2008-07-03 00:54:57
Removing file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/oradim.log.
INFO 2008-07-03 00:54:57
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\oradim.log.
INFO 2008-07-03 00:54:57
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:54:57
Output of F:\oracle\ecc92/bin/oradim '-NEW' '-SID' 'ECC' '-STARTMODE' 'auto' is written to the logfile oradim.log.
INFO 2008-07-03 00:55:03
Execution of the command "F:\oracle\ecc92/bin/oradim '-NEW' '-SID' 'ECC' '-STARTMODE' 'auto'" finished with return code 0. Output:
INFO 2008-07-03 00:55:08
Switched to user: eccadm.
INFO 2008-07-03 00:55:08
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:55:08
Switched to user: eccadm.
INFO 2008-07-03 00:55:08
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:55:11
Switched to user: eccadm.
INFO 2008-07-03 00:55:11
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:55:50
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\ora_query3_tmp0_1.sql.
INFO 2008-07-03 00:55:50
Switched to user: eccadm.
INFO 2008-07-03 00:55:50
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:55:50
Switched to user: eccadm.
INFO 2008-07-03 00:55:50
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:56:15
Removing file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/ora_query3_tmp0_1.sql.
INFO 2008-07-03 00:56:15
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\ora_query3_tmp0_1.sql.
INFO 2008-07-03 00:56:15
Switched to user: eccadm.
INFO 2008-07-03 00:56:15
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:56:16
Switched to user: eccadm.
INFO 2008-07-03 00:56:16
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:57:56
Removing file E:/Program Files/sapinst_instdir/ECC_50_ABAP_NUC/DB/ora_query3_tmp0_1.sql.
INFO 2008-07-03 00:57:56
Creating file E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\ora_query3_tmp0_1.sql.
INFO 2008-07-03 00:57:56
Switched to user: eccadm.
INFO 2008-07-03 00:57:56
Working directory changed to E:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2008-07-03 00:57:57
Switched to user: eccadm.

Installing CE 7.1 in Windows Server 2003 (32 bit)

Hi,
I am trying to install CE 7.1 on Windows Server 2003 - 32 bit. Is this possible on a 32 bit system?
If not, then what is the alternative?
I cannot install CE 7.1 on Windows XP as the DB i am using is SQL Server 2005 which cannot be installed on Windows XP.
Plz give me the possibilities.
Thanks in advance
Roshan

A 32 Bit Systems seems to be the only way to go. As I said in the other thread, the installation chrashed during the Installation on a Win 2008 64 Bit system, it works fine on a 2008 32 bit one.
cya,
Matthias

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

Installing BPC 7.5 on Windows Server 2003.

Hi all.
I'm installing BPC 7.5 on Windows Server 2003.
The step: Sap bpc installation - "check server environments" is taking too long.
Is that normal???

Hi Gisele,
no that step does not usually take very long (a few minutes at most).
Did you check that your server meets the requirements as listed in the instalation guide?
Best regards
Bruno

Cant install ActiveSync 4.5 on Windows server 2003

hi
i try to install ActiveSync 4.5 on Windows Server 2003 - It seems that it installs
but after the reset the computer want to install again... and no ActiveSync was installed
how to install ActiveSync 4.5 on Windows Server 2003 SP1 ?
thanks

Hi GoldSoft,
Thanks for your post.
This forum is to discuss problems of Windows Mobile Development . Your question is not related to the topic of this forum.
But here is a useful link:
Problem: ActiveSync 4.5 install on windows server 2003
And other resource:ActiveSync 4.5
Hope this helps you.
Best Regards,
Eileen
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Out of memory using Windows Server 2003 and Oracle 9.2.0.3

Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.

CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

HP LaserJet Pro MFP M127fn - Windows server 2003 X64 Drivers Missing

Hi,
We have almost 80 Numbers HP 1212 MFP Printer which we are using in windows server 2003 X64 Operating System. Because of unavailablity of this model anymore, we are using HP Laserjet Pro MFP M127fn and the driver is missing for this operating system.
Anyone have Drivers or any other solutions ?

Hi Mike, Did you end up working your problem out? We have the same issue, prints fine from Windows 7x64 desktops via TCP, but it's a no-go on Server 2008R2. Cheers - John.

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

Db 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003(x64)

Hi;
I just read this and want to share Steven Chan's good news :
Database 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003 (x64) for details please visit :
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regard
Helios
Edited by: helios on 26.Eki.2009 07:30

Hi,
Thanks for sharing the document, but I would suggest you change the link to the following as the link above points to the main blog link ;)
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regards,
Hussein

Quicktime 7.1 won't install with MS06-015 on Windows Server 2003

Quicktime 7.1 will not install correctly on Windows Server 2003 with MS06-015 - Vulnerability in Windows Explorer Could Allow Remote Code Execution installed.
We have tried this on at least 6 machines. All fail at the last step in the install process with the following error:
"Unhandled Exception:
Error Number: 0x80040707
Description: DLL function call crashed: QTInstallCode.QuickTimePostInstallProc
Setup will now terminate"
This leaves Quicktime (and iTunes if installed) broken.
Removing MS06-015 allows Quicktime 7.1 to be installed but leaves the gaping holes fixed by MS06-015 wide open - not a good place to be.
It's more than likely that this is caused by Quicktime 7.1 being blocked by Verclsid.exe which is installed by MS06-015. See this Knowledge base article - You may experience problems in Windows Explorer or in the Windows shell after you install security update MS06-015 for more information.
Can anyone else please confirm this or better still can this please be fixed?
Cheers,
Sim

G'day Sam
First I gonna tell you don't try this at work Server...
I had try this on Windows Server 2003 Standard Edition and it work fine/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png
After I had been test and test..... Look like QT-7.1 doesn't like(Shell32.dll Ver. 6.00.3790.2662).
There is way to fix this problem.
1. Send me an email, I will send you back (Shell32.dll Ver.6.0.3790.2534)<< This version working with QT-7.1 after I uninstall all the HotFix Update that relate to Shell32.dll.
How to replace this dll file
Don't use Search to find this file.
Click into C:\ and type in the Address bar C:\windows\system32\ then find the current Shell32.dll > Rename it to some thing else, just incase if it not working for you, so you still have the orignal file.
Then copy the file I send you to the System32 folder.
Restart you PC and try to install again....
Good Luck
Let me know if it not working...
Cheer...

Fresh Install 10.1.3.4 - Windows Server 2003 x64; - Oracle Client question

Similar Messages

Maybe you are looking for