Fresh install for Windows 8.1 Pro on GE40 2OC?

Hi there,
I had just purchased the GE40 2OC notebook.  At the same time, I had also purchased the Windows 8.1 Pro upgrade separately.  I would like to have a clean install on my system.
My concern would be how to set up the 2 x 64GB SSD HDD under Super RAID, on top of the 750GB HDD.
Will it be automatic under the Windows 8.1 install?  Or are there specific steps to do so?
Thanks,
Chester

The raid array is already set up, you will just see it as a single destination drive and possibly need to load raid drivers during install.

Similar Messages

  • No Audio from Internal Speakers after a fresh install of Windows 7 Pro

    T400S - after a fresh install of Windows 7,  theres no audio from the Internal speakers. When I plug an external speakers there's audio. I also install the  audio drivers from the Lenovo site.  Thanks 

    Does your sound bar in the Sound Windows go up and down when you play music?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

    Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
    a fresh win 8.1 enterprise install on a Hyper-V VM.
    I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
    event log says:
    Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
    "C:\RSAT Windows8.1-KB2693643-x64.msu" ")
    CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

    As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
    You can also re-try downloading the files to see if your original download was just corrupt.
    Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
    It was a permissions issue! Thanks so much Bruce!
    I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
    1) double clicked the installer.
    2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
    3) Installation was successful.
    Not really sure why this happened as it doesn't make sense but it's working now :-)

  • Fresh Install of Windows 8.1 on rMBP mid 2012

    Seeing how there are issues about bootcamp and windows 8.1, anyone know if a fresh install of Windows 8.1 (non-pro) will work on a rMBP mid 2012 model using the usual bootcamp instructions? Or will I have to do a workaround to get it installed?

    That is what I fear. I've heard issues about installing windows 8.1 directly (though most seem to be about the 2013 MBPs, unsure of my model), and considering it's impossible for me to get a copy of windows 8 and upgrade through the store (the optimal solution) now, I'm left with installing 8.1 right from the get-go. Anyone else have success/experience going through the 8.1 route on 2012 MBPs?

  • Did a fresh install of Windows Vista and Premiere CS5 and now Premiere is buggy!

    Hi everyone. I was using Premiere Pro CS5 on my quad core system editing AVCHD clips just fine and then I had to do a fresh install of Windows Vista Home Premium. I then did a fresh install of Premiere Pro CS5 on a separate hard drive and opened up one of my AVCHD projects. Now, for some reason, the same AVCHD projects that played fine before are now jittery and also show blocky artifacts. The jitter seems to be a constant jitter every second and the blocky artifacts seem to happen mostly when the subject in the clip is moving. I know the problem isn't in the original clip from my GH-1 camera because if I play the original clip that is on my hard drive, it plays just fine so, it has to be Premiere CS5 that is causing the clips to play all jerky on the timeline. Can someone please help me solve this problem? One more thing, when I reinstalled Premiere CS5, I installed the latest update from Adobe. I didn't have that update installed before when the clips played fine. Could that update be the culprit? Thanks.
    My clips were recorded using a Panasonic GH1 HDSLR camera and are 1080/24p (progressive).
    Karizma

    As far as I know, you thought wrong
    My 3 hard drives are configured as...
    1 - 320G WD Win7 and all programs
    2 - 320G WD Win7 swap file and PPro projects
    3 - 1T WD all video files... read and write

  • Windows phone 8.1 SDK want to install on WINDOWS 8.1 PRO 32bits...how can i ?

    windows phone 8.1 SDK want to install on WINDOWS 8.1 PRO 32bits...how can i ?
    is there any patch or any other version for windows 8.1 32 bits..to run win phone SDK..?

    Hi,
    According to the reference about Windows SDK, you should install it on a 64 bit system:
    http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff626524(v=vs.105).aspx
    Regards
    Wade Liu
    TechNet Community Support

  • FRESH install of Windows 7 Home Premuim on a new G550

    I just got a new G550 with Windows 7 Home Premium yesterday that I like so far (less than 24 hours)
    I am probably not the first to think this, but if I wanted to do a FRESH install of Windows 7 Premium (it came on the Laptop) I dont like all the junk Lenovo puts on there though. I removed a lot of it and did an image of it once i got it where I liked it just in case. (Along with a repair disk)
    Obviously it does not come with a straight Windows 7 disc. BUT.... If I had a copy of the same OS and tried to install it with a reformatted hard drive using the key that is on the bottom of the laptop, would that work?
    I don't see the need for One touch restore/recovery with the native imaging software. I would like to clean up the drive, get rid of the hidden partition and go from scratch. Tell me I am missing something here.
    Lastly, I can't find anywhere on Lenovos support pages where I can find ANY Windows 7 drivers I might need. Am I stuck?
    Thanks,
    Doug

    UPDATE:  I gave up on tech support at Lenovo and called the sales department.  They were helpful as my computer is under warranty.  They are kicking it up to the next level and are supposed to call back today with further options that may include replacement.  Time will tell.
    Microsoft support says it is a Lenovo problem not a Windows problem, six hours total spent with micosoft,   I have contacted the broadband card manufacture and received a little help.  There are known issues according to D-Link with the router configuration.  These have been correced. 
    Will update with further information tommorow.  Another call scheduled with the senior engineering staff at Microsoft to attempt to correct the issue.

  • ITUNES 10.6 is not installing for windows 7

    ITUNES 10.6 is not installing for windows 7;

    Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

  • How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

    I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users. 

    Hi @mfatihbodur
    Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
    Validity Fingerprint Sensor Driver (Windows 8.1)
    HP SimplePass Identity Protection Software (Windows 8.1)
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HT5628 Is it possible to install MS-Windows on MacBook Pro as the only OS

    Is it possible to install MS-Windows on MacBook Pro as the only OS, using all the space of the SSD, by de-isntalling thus completely the Mac OS?

    Yes.
    but
    You will have to erase the drive completely and install Windows, you can't achieve it just by deleting OSX
    I do not recommend that you do it.

  • HT3986 how to install any windows on macbook pro (early 2011) (os x mavericks)?

    En: how to install any windows on macbook pro (early 2011) (os x mavericks)?
    Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)?
              Help Me Please

    search
    how to install windows on a macbook pro
    http://support.apple.com/kb/ht3986
    http://www.youtube.com/watch?v=uVfRQ0YIDUI
    http://www.gadgetreview.com/2013/05/how-to-install-windows-8-on-your-macbook-pro .html
    http://www.redmondpie.com/how-to-install-windows-7-on-macbook-pro-with-retina-di splay-tutorial/

  • "canon mp navigator ex has stopped working" cannot get this to work - fresh install on windows 8.1

    Trying to get LiDE 110 scanner working on my laptop. I keep getting this message once scan is complete "canon mp navigator ex has stopped working" and then a corrupted pdf is saved - fresh install on windows 8.1 I have used most up to date drivers and software and tried these two "fixes" from an internet search on this topic (it seems to be a common problem that hasn't been addressed by Canon) - I'm on the verge of returning the scanner!! 1) Delete this file: C:\Users\<user name>\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN.      RESULT - "My Web Sites on MSN" does not exist in that folder on my computer. 2)Remove "sdc330Twain.ds" from windows Twain-32 folder      RESULT - didn't have any effect Thank you, in anticipation!

    Currently running the scanner on "Advanced scan to pdf" but would like to have access to the canon software with more options 

  • Hi Guys, best process is upgrade or a fresh install for already existing solution manager?

    Hi Guys, best process is upgrade or a fresh install for already existing solution manager to SAP 7.1?

    Hi
    Have you checked below link or presentation..it might help you to get more relevant inputs for decision
    Upgrade to SAP Solution Manager 7.1
    also incase you have charm or service desk check my blog as well.
    Upgrade Roadmap - Solution Manager 7.0 to 7.1 with Service Desk/ChaRM
    Hope this helps
    Thanks
    Prakhar

  • Hi, can anybody convert me a .lso file made under v 4 for windows to logic pro x? please pm me !!

    hi, can anybody convert me a .lso file made under v < 4 for windows to logic pro x? please pm me !!
    or: does there exist a workaround to solve this problem?
    my e-mail :
    thanks
    <E-mail Edited by Host>

    Hi
    The Art Of Sound wrote:
    What is the problem you are having?
    Normally a window's ISO image can easily be opened in Finder just by double clicking on it...
    The OP is referring to a Logic "Song" where the file extension was/is .LSO
    CCT

  • Fresh Install for Mail, iCal and MobileMe

    After several rounds with MobileMe support with what I thought were iCal syncing issues, I think I want to do a fresh install for all things Mail, iCal, and MobileMe (sync services).
    Syncing stopped working on iPhone and turns out I may have had a corrupt Calendar file, which may have been caused by my tinkering with Mail when I had some issues...etc etc. Anyway, suggestions for what to do to start all over?

    Read the Apple document Mac OS X v10.5, v10.6: Resetting the SyncServices folder and see if that helps.
    Plus to reset any program in OS X just go to the folder /Users/YourUserAccount/Library/Preferences/ and find the preferences for the program you want to reset to default and throw that preferences file away. This will reset a program in OS X on your account back to default (in most cases).

Maybe you are looking for