Fresh Install Issues using target disk mode

Hi people...
I have a bit of a problem installing 10.4.3 onto an xserve cluster node that is in target disk mode from a 10.4.9 Xserve head.
I tried using MacOSXServerInstall.mpkg on teh 10.4.3 dvd that came with the Xserve but I get the follwing msg...
You can not install "Mac OS X Server on this volume. You can only install the Server Administration software on a computer running Mac OS X System version 10.4."
I have tried erasing the drive and it is in good order.
Any help / sugestions would be appreciated.

Hi Mik,
I believe the package you're trying to install is the package which will upgrade OS X 10.4.x to OS X Server 10.4.x. In other words, it will upgrade the "client" version to the "server" version. As such, you need a working client install on the machine already. This approach is sometimes necessary if you're trying to install OS X Server on a machine that comes with a newer OS version than the OS X Server media (say you have the 10.4.2 server media and buy a new machine that comes with 10.4.8 client -- you use the named package and immediately do a software update).
I think you need to install from a different disk. Double check you're using the right media.

Similar Messages

How do you install Tiger using target disk mode?

Hi guys,
I have an old Powerbook G4 that seems to have a dead DVD drive, so i am now trying to install Tiger using target disk mode from my Macbook Pro.
I successfully mounted the G4 using target disk mode and the Tiger install DVD but when I double click the install icon, I get an error message saying: "Mac OS X 10.4 cannot be installed on this machine"
Okay, fine but i want to install the OS on the G4. How do I go about selecting the G4 for installation?
Thanks in advance for your help.

Hi Nichola,
Have you tried a search on the support site with the error messages you are receiving? (Maybe your computer doesn't meet the minimum requirements to run Tiger.)
To re-initialize your disk, go into disk utilities, select 'Erase' and follow the instructions. This will erase and format your disk. Hopefully this helps, but I'm not sure if it will solve your kernel panic problem - maybe that's a different issue all together??
Hopefully, you've already backed up your important data, but you should try to use target disk mode to do that if you are still unable to boot up the G4 using Tiger. Good luck - hope this is helpful.

Is it possible to store a back up on external HD by transfering files using Target Disk Mode?

Dear Apple community,
There's absolutely no way that I'm going to be able to fix my MBP without a clean install. I simply cannot log in and get to my desktop screen after upgrading to Mavericks. So I will have to erase everything and perform a clean install. However, before proceeding with this plan, I'll have to back up my files from my MPB since I cannot use my mac normally, I'll have to back up my files using the Target Disk Mode. I've connected my MPB to another MPB in the past, so I know how the process work. But this time around I won't be able to use another MBP but a MB. I have a few doubts regarding the process especially in what concernd adding an external HD to this equation. So please bear with me and see if you can answer my doubts.
So this is the equipment I'll be working with: my MPB, my friends MacBook (2008) and my 1TB external hard drive.
My basic question is: once I connect my MPB in Target Disk Mode to the MB, I'm sure I'd be able to transfer my files to this MB. But let's say that I don't want to leave my files in this MB (after all it's not my computer) and want to send my files straight to an external HD connected to this MB. Is it possible? If positive, I know that the only FireWire port in the MB is a 400 port. That means my MBP will be connect to the MB using the only FireWire port available in the MB. So I believe that my external HD would have to be connected to the MB with the help of an USB cable. I assume that this will make the transferring process a little slower than if I could count solely on FireWire ports. Slowing the process down is not a problem but could this corrupt any of my files during the transferring process or even damage anything? I assume that would never happen after all it's just digital data, but better safe than sorry, right? What do you think?
Another thought that occurred to me is: let's say I connect my MBP to the MB using the FireWire 400. I'd still have an FireWire 800 port available on my MBP. If I connect my external HD to my MBP (yeah, the one that will be in Target Disk Mode) using that FW 800 port, would my MBP allow this external HD to mount as if it was just another folder/drive in my computer? If positive, theoretically I'd be able to transfer files from my MBP to my external HD manually (by dragging files from folder to folders), right?
I really don't want to transfer my files from the MBP to the MB and then from MB to external HD. That would just take time and I really don't know how much available space I'll find on my friend's MB.
Oh, one last question: when transferring files using Target Disk Mode, do all computers involved in this process gotta have the same OS X version installed or it doesn't matter if e.g one is running Snow Leopard and the other Mavericks?
Looking forward to hear back from you, experts.

Grant Bennet-Alder West of Boston, USA
A new 1TB External drive (suitable to replace your current Internal drive if you choose to) and enclosure can be had for under US$160
Ehh, you meant $60 , not $160
CassHeger
I do need to buy an external HD to be used solely for that purpose.
Yes, quality HD are cheap as dirt.
however a likewise Toshiba Internal HD 1TB is $70   (same as used by Apple)
http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c3 2 9263f2
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim and perfect
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
$88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
Most storage experts agree on the Hitachi 2.5"

Check if Someone used Target Disk Mode on my comp?

Is there any way to see if someone "hacked" into my computer using Target Disk Mode? My only thought is to check the Console but I see nothing active during the time frame I was thinking it happened. Also, can someone delete that info from the Console if they wanted?
Thanks for any info.

hawkeyext wrote:
Just tried what you suggested and no, unfortunately the Console does not log that data down. I'm surprised there is no way to find this information out. Does the hard disk have any sort of log for when it's powered on? I know the Apple Geniuses at the store have access to this because they can test out the battery. I've seen them pull up charts with Charging Times and more.
The hard disk will write changes using the date & time set on the device writing to it. In the same way as any other external disk.
You don't seem to have fully grasped that Target disk mode (TDM) is the Mac's firmware turning the Mac into a 'dumb disk drive'. The Mac OS installed on that hard drive is not in control of the OS - otherwise TDM would be useless for restoring a damaged OS. You can use TDM when the HD is blank etc because the installed OS it is not in control.
Permissions still prevent users reading & writing things they don't own, but anyone with experience will be able to disable/ work around that.
BobHarris is right about physical access. Encryption is the only way to go, combined with a lot of powering down when not in use.
Read the Hardening Tips for Mac OS X 10.6 "Snow Leopard"
http://www.nsa.gov/ia/_files/factsheets/macosx_10_6_hardeningtips.pdf to see what the NSA has to do to get some better security on Macs, it is old now but a lot still applies.

Is It Safe To Use Target Disk Mode Between My Intel iMac And A G4 eMac ?

I want to use DiskWarrior 4 to rebuild my Intel-iMac's directories but a suitable startup CD has not yet been produced.
So I intend to put DW on my old G4 eMac (OSX 10.4.10) and use Target Disk Mode between the two.
As they have different processors and OS will it be possible and more importantly will it be safe to do so?
Ian.

I received the very latest CD revision from Alsoft for DiskWarrior, Rev. 42. This latest version is STILL not able to boot the newest MacBook Pros. I tried, and eventually my MacBook just restarts to its internal HDD.
So I tried to run DiskWarrior 4.1 on a PowerMac Dual G4 which I had the Macbook Pro connected via target disk mode. NOTE: Both Macs are running the latest Mac OS X 10.5.4.
About half way through the "rebuilding directory" process, the G4 had a kernel panic and the black screen came up telling me to force shutdown my Mac. I nearly soiled myself. Luckily, the freeze up happened before the vital stage when DiskWarrior is replacing the directory. So MacBook Pro luckily booted back up okay.
So, I'd say to play it safe and NOT try to run DiskWarrior 4.1 from an older pre-Intel Mac to rebuild an Intel Mac's directory via target disk mode.
Currently, I think my only option I have to rebuild my Macbook Pro's directory is to install Mac OS X on an external HDD, install DiskWarrior and run it from there.

Installing in Firewire Target Disk mode

I know this is a kind of silly question, but is it advisable to install OS X on my iMac when it's booted into Firewire Target disk mode? I mean, would it get funky stuff in there that the iMac doesn't need if i install from, say, my PowerMac? I know it's quite possible to do this, as I used to do it when I had two identical iMacs. But those were, of course, identical, so the target machine had the same specs as the one that was installing.
Any thoughts?
Oh, and let me say a quick "hi" to all the regulars. I haven't really been on this baord too much the past year or so. Who's still around?

Hi, Trey.
I installed Tiger via Target Disk Mode, but my G3 has been having kernel panics in the couple weeks since the upgrade. On another post someone said that they'd heard that the Target Disc Mode can be a problem. So I'm checking the posts to find out more.
My G3 has a CD-R/W drive, so I didn't have an alternative, other than to buy an external drive, or to send Apple my commercial Tiger DVDs and pay them MORE to convert it to CDs. I just paid big bucks for the G5 a month before they came out with a cheaper upgraded version, which I am unhappy about. Of course those Tiger disks are for G5 ONLY, so I couldn't install to my G3 from them, so I coughed up the cash for the DVDs. I couldn't fathom giving them even more for a CD transfer.
Of course, if the G3 keeps crashing, and I hear from others that a direct install from CD may cure the problem, what choice will I have? As much as I've loved Apple over the years, there's starting to be a more corporate (and dare I say it, Gates-like) vibe from their method of doing business. Now the kid wants an iPod for Christmas, and I have to check those boards to see how they're performing. As helpful and fun as all this technology is, it is also quite stress-inducing...
Good luck with your upgrade! --kat
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz slot-load CD-R/W CRT; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz; slot-load CD-RW; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984

How-To: Install Bundled Apps to another MacBook Pro using Target Disk Mode

Recently, I replaced the dead hard drive on my wife's computer. All the data was previously backed-up so all I needed to do was reinstall the original OS. Oops! Those disks disappeared over two years ago...perfect, right? No poblem, I already had the boxed install DVD for Snow Leopard and installed the core OS. But what about those bundled applications? Aha! That is the marketing coup Apple doesn't really talk much about. You see, you get the entire suite of Apple branded apps with the original install disks but not with a boxed OS install disk. It's just something that you have to find out for yourself...the hard way.
My requirement: restore all the iPhoto data to the reimaged machine running Snow Leopard. But that data has no application that can read it. Solution - Reinstall iPhoto from another source.
So I developed this workaround I hope the rest of you find amusingly simple, wildly helpful
Here's how I restored iPhoto on my wife's computer:
1) Get two Laptops side by side. In our case we both have macbook pro 2008 computers (Wife's and Mine)
2) Power both down and direct connect a firewire 400 cable (or 800 if you have it) between the two
3) Start the Wife's laptop in Target Disk Mode: Press "T" immediately after engagin the power button, hold it down until you see the "fanned" firewire symbol floating across a grey screen - it's quite large, about the size of your hand making a "stop" gesture
4) No start the Mine laptop by pressing the "option" key (two keys to the left of the space bar)
5) You will presented with a pair of hard disks to boot from, choose the Wife's laptop hard drive
5a) you'll notice now that the Mine laptop is booting the OS system files of the Wife's laptop (Her desktop, her preferences, etc...)
6) On the Mine laptop, insert the original Mac OS Install Disk (#1) that came with the Mine laptop (usually any OEM install disk will work, though)
7) Double-click on the DVD icon on the desktop when it mounts and look for a shortcut that reads, "Install Bundled Applications Only"...launch it
8) Now choose install bundled applications but make sure to press the "Customize" button in order to specifically choose which OEM software you want. In our case, just iPhoto
9) Follow the installer prompts all the through to completion and exit (you will be prompted to insert disk #2 along the way).
10) Remove the install disks, power down
11) Power down the Wife's laptop too
12) Disconnect the Firewire cables from both laptops
13) Power up the Wife's laptop normally
14) Launch the FInder and drill down to Applications. Look for iPhoto and launch it
15) iPhoto will either pickup the "iPhoto Library" that was previously restored after reimaging with Snow Leopard or you may be prompted to manually associate a library with iPhoto.
16) Once complete, you'll se all the restored pictures and data from when before the original hard drive crashed. Wife will be pleased and you'll look like a Genius
This is a really handy trick for troubleshooting a lot of install and restore related issues.
Hopefully you'll find other uses for it too.
Good Luck,
TheHighSierras

I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
     1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
     2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
     3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
     4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
Have a good backup of everything before starting in case there are problems.
Good luck...

Using Target Disk mode to reinstall OS-X

I have a PPC G5 Dual 2.0gHz which failed the other day. All the fans were running full and a red LED showing on the logic board (it's just a warning I think). Since then the machine cannot be started up. It will begin the startup process normally but will hang on the Apple logo screen (no spinning gear wheel).
The same thing happens when attempting to start up from the install disks and also when started in safe mode or with Option pressed down at startup.
The logical assumption (given the original failure) is a hardware problem but I'm not entirely certain that's the case and cannot get it to a technician right now. I can run Apple Hardware Test and it passes that. I can also mount the G5's drive in Target Disk mode using a PowerBook G4 as a host so the drive itself appears to be okay. All the data is there and can be transferred.
Is it possible that this is software not a hardware issue? The normal startup chime is there, the relay clicks at startup and it does begin to access the drive and all the normal noises can be heard. Just stops loading at the Apple logo screen. I'm wondering if some OS files were corrupted in the original crash (which happened overnight so I don't know what caused it) and if there is some way to eliminate the OS as the problem before going to a technician.
As I can mount the drive in target mode, is it possible to use my PB as a host and reinstall the G5 OS-X that way? They're different machines so I don't know if that would work or the PB would reject the installation. Alternatively, if it could be just corrupted OS system files would it make sense to try to 'guess' the most likely to have been corrupted and manually replace them, again using the PB as a target host?
I'm really stuck without this machine but just can't get it to a workshop for at least a couple of weeks so I'll try anything!

Boy, I love these forums, and I love Macs (most of the time). I was so convinced this was hardware but it seems (fingers crossed) to be fixed. Yay!
You guys were both right in a way. Roam's solution would clearly have been the easiest but because I had tried it before without success I didn't expect it to work. And, trying it again with the G5 install disk, it didn't. Same problem as before. But Graham's reminder of using the original multi-machine Tiger disks in target mode made me wonder. So before trying Target Disk mode I tried just restarting the machine using the Tiger DVD instead of the G5 disks -- and it booted into the installation dialogue!
I figured I'd need to reinstall 10.4 (and, if it worked, go through the whole update drag to get back to 10.4.10). Before I did that though, on a whim, I tried quitting the installer and selecting the normal G5 system as the startup disk. Restarted and voila -- there it was, all back to normal, everything sweet and no data lost!
I didn't even need to repair the disk. Disk verify shows no problems. Even repairing permissions was just a couple of minor changes. I'm amazed. And delighted.
I might be jumping the gun and there might still be a hardware problem that will repeat the original failure and I'll find all the fans going full blast and nothing working again tomorrow but, if Murphy is having time off, for the moment I'm back in business.
I would love to figure out what caused the problem in the first place. I suspect a big power surge overnight did it but I have no idea exactly what it did to cause these symptoms.
My grateful thanks guys.

Using Target disk mode from hard drive which is starting to fail, when I move files, I get a preparing to copy message but nothing happens. Any ideas?

Hello, i have a MacBook Pro. The hard drive is failing to such an extent that I can't currently use the computer, only things like utility mode etc. I have connected it unto my iMac and using a Firewire in target disk mode, I am attempting to move files across using that mode. The HD of the Macbook Pro appears in the IMac devices menu and I copy and paste the appropriate folders/files but as I do this I get a progress bar which says "preparing to copy" but then nothing appears to happen. Any ideas on what to do? Is there a password or other issue here that I am over-looking. Perhaps the hard drive of my macbook pro is so corrupted that I can't move files over. Any help would be great?

Try moving smaller groups of files. I' guessing that you don't have a backup huh?

OS Upgrade Using Target Disk Mode

Is this possible?
I have a 700 MHz eMac with CD-RW drive running Panther and I want to upgrade it using a Tiger DVD. If I put the eMac in Target Disk mode using my Intel iMac, is it possible to upgrade the OS on the eMac?
My concern is that once I put the DVD into the Intel iMac and launch the installer, the iMac will restart and break the Target Disk connection with the eMac. If this does occur, is there any way to put the eMac back into Target Disk mode once the installer takes control of the iMac?
TIA

Are you intending to upgrade to Tiger using the disk that came with your Intel Mac?
Not possible. It has Intel architecture and your eMac is PPC. Do not attempt it. If it starts installing it will hose your e-Mac. To upgrade the e-Mac you need a
Retail Tiger disk.
The Apple store still sells them.
DALE

Unable to Install via Firewire Target Disk Mode

I'm having problems with installing Leopard 10.5 via Target Disk Mode. The 2 Macs I am using are a eMac 1.0GHz with 1GB RAM Running OS X 10.4.11 and a PowerMac QuickSilver 933MHz 896MB RAM Running OS X Server 10.4.11.
The eMac's Combo Drive has gone south and won't read DVDs so I am putting the install DVD into the QuickSilver. If I start the QuickSilver in Target Mode I only see the QuickSilver's harddrive on the eMac and can't access the install DVD. If I put the eMac in Target Mode and boot up the QuickSilver using the Install DVD after I get through the language selection it says the QuickSilver isn't capable of installing it.
Any suggestions would be helpful.
Thanks

Then, you're out of luck if the QS can't run Leopard. My G4 does. You might look at
http://www.macosxhints.com/article.php?story=20071214143723301
http://www.tidbits.com/webx?14@@.3cb6ddd5/5 and
http://forums.macrumors.com/showthread.php?t=371302
to see how you can work around it. Alternatively, use another machine or ext burner to boot the eMac with the DVD. With the QS in TDM, only the master disk is available.

Something annoying this way comes: using targeted disk mode for boot drive

So, this should be doable, but it's not working. Can anyone explain why, or what I'm doing wrong?
I have an Intel iMac, and an Intel MacBook - both are running Leopard. I temporarily want to use the iMac as the workstation, and the MacBook as the operating system hard disk. So, I put the MacBook in targeted disk mode, and connected it to the iMac via firewire 400. From the iMac, I option-booted to see the available boot disks. I then selected the MacBook's disk and clicked the arrow icon to boot. Once the iMac attempts booting, it displays the spinning cog on gray screen for longer than usual, then goes to a blue screen with an intermittent spinning cog. It seems to hang at this point.
I've done this with PPC machines in the past, so I'm not sure what the deal his here. The only things I can think of that would be a problem, but really shouldn't be are: 1) the MacBook is running 10.5.2 (keeping it at v2 due to the CS3 issue) and the iMac is running 10.5.3. Also, the iMac is the 24" model - so perhaps there's a screen resolution issue...
Any advice out there? THANK YOU!

Hi
Presumably the version of Leopard on both models are hardware specific? I would have thought extensions for device specific hardware such as graphics drivers etc on the Macbook would not include support for the 24" iMac. Bigger screen, more resolution support and a more powerful graphics card.
If you were to go the other way I can imagine the driver included for the iMac 24' would probably support the smaller Macbook screen.
I don't have any link or kbase that I can point at to prove this 'theory' because thats all it is - a theory. But it kind of makes sense to me and does explain the behaviour you see.
Tony

G4 PM will not boot after using Target Disk mode connected Intel iMac.

Hi,
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
Thanks,
Nick.

I had an experience with a mini mac after booting in target disk mode while connected to a blue and White G3 via Firewire. After attempting a restart, all I got was a blinking ? which usually means the startup disk or system folder can not be found.
I fixed this problem by booting using the originall install CD and then using the startup disk menu to reselect the original system disk/system folder as the startup disk. On reboot. all was good. Only took a couple of minutes.....

Can I use Target Disk Mode over USB?

When I enable Target Disk Mode on my MacBook Pro, can I connect that via USB to a PC (which doesn't have FireWire) and use the Mac as an external hard drive?
If not, are there any third-party products which would let me do this?

No. I doubt you can use FW mode on a PC anyway.
The cost of USB or FW external drives is so low buy one for the PC. IF it is formatted FAT32 then the mac and PC can both read and write to it.

Help installing via Firewire (Target Disk Mode)

I purchased a used iBook G4 which came with Tiger 10.4.8, and as much as I really wanted to keep it, I don't have the original Tiger discs and needed to reinstall an OS to be the Admin account (I kept getting password prompts when connecting and updating my ipod, etc).
I have Panther and have successfully installed it under circumstances where I've had to utilize Target Disc Mode (connecting one computer to another via Firewire).
I've tried connecting this iBook to my iMac G3, it recognizes it, and I am fully capable of formatting the iBook's disc, which I have, but after attempting to install Panther, the iBook won't boot on its own.
First of all, it also won't boot off the Panther disc by holding down C on bootup. So i am pretty much limited to a Target Disc Mode install. So, to explore an alternative, I have a G4 with a Software Restore disc at work. The restore has Jaguar on it, but I figured I could restore to Jaguar, then upgrade to Panther no problem.
Again, using my iMac G3 and the restore CD, i was able to install the OS, but the iBook still does not want to book on its own. Unlike with the Panther install, this time it gets a few seconds into loading and then crashes. It gives me the black box in the middle of the screen saying I need to restart my computer by holding the power button for a few seconds.
Any thoughts? Is it possible that since the G3 and the iBook G4 are in different "families" something's not going right?
Im going to go up to my office later today and try using my G4 to host the iBook through Target Disc Mode and see if that makes a difference.
Thanks for any feedback.
-Justin

Hi -Justin!
Tiger is available for purchase at The Apple Store (U.S.).
If you know what you are lookng for, a Full Retail Version, of the Tiger Install DVD, can alsobe purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
As already posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
The disc must look exactly like the images in the above links.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Tiger 10.4.x is installed, you can use the PPC 10.4.8 Combo Update, to upgrade to the current version.
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Fresh Install Issues using target disk mode

Similar Messages

Maybe you are looking for