Fresh install keybinds stop responding [solved]

Hi there,
I've recently been having some issues with Arch. I did a fresh install because I'm running on a chromebook and need as much space as possible only have a 14GB SSD at present until I get round to upgrading it.
I previously installed Arch (i386) with no such issues, but I've recently switched to i3 WM and x86_64 using this: https://wiki.archlinux.org/index.php/Ch … tion_media. Last week I also installed a custom chrome patch
https://wiki.archlinux.org/index.php/Ch … .27_Script and everything was working fine with this. I did a fresh installion of Arch about an hour ago and I'm mentioning this because it allowed me to install Arch 64bit directly from the dual ISO without having to modify the ISO itself so I'm not sure if that's the issue considering the 32bit installation worked from the same ISO.
Now I have some strange issues. Keybinds work fine when I boot up but when I open urxvt it seems to stop all my binds working. Similarly the same issue happens when I run dmenu and open chrome. Sometimes I can open multiple instances of the aforementioned before it stops working. The mouse icon changes as if it's trying to load something, but nothing opens and absolutely no binds work.
I've tried other WM's and get the same issues with urxvt and dmenu.
I have searched google but can't seem to find any related issues so I'm at a loss as to where to begin.
Any help would be greatly appreciated.
Thank you.
Last edited by Gwynplaine (2014-11-20 16:24:37)

It seems that the use of dmenu causes things to hang. I'll reboot and wait a few minutes and see if it automatically does it.
I have not modified any files since installation except enabling wicd and slim with systemctl and the modifications to .xinitrc.
Thanks for the information. I'll bear that in mind.
Edit:
So I rebooted and left the system for five minutes. After that I ran dmenu using alt+d (as defined in i3 config). Dmenu would not open and changed the mousekey to the loading icon and no other bindings would work again.
So I believe that the issue is definitely with dmenu.
Edit 2:
So a little bit more information on dmenu. I have installed it with every installation. My system is 64bit and I have enabled multilib. I installed it through pacman.
I'm going to disable multilib and re-install.
Edit 3:
Same issue. Actually seems worse now.
Edit 4:
I'm wondering if it could be due to this section of .i3/config?
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
Edit 5:
Okay so after some testing it seems to be i3. I've re-installed, using the i3-git package from AUR. I'm installing Yeganesh and I'll see now how this plays out.
Last edited by Gwynplaine (2014-11-20 01:57:48)

Similar Messages

  • Trouble Installing, Installer Stops Responding... Please Help!

    Okay, here is my problem. When I go to install it I get as far as to the point to enter first name last name company and serial. Now when I enter all this information and hit continue I get an hour glass and eventually installer will stop responding. So after a while of trying things to get it to work I repaired permissions, I repaired the disk, I even reinstalled Mac OS X Snow. It still has not work. So I pulled up the Console this time to find that when I have the hour glass the console says it is looking for a file called AELWriter. And it says its missing. It should be in usr/sbin/AEL Writer. However I went there myself and it is not there. Now considering all this, also consider the computer is brand new, 17 inch mbook pro, so I am guessing that the install is being stopped from this and it is missing. Is there anyone out there that can help me??? Or even know what i'm talking about????
    -JJB2829

    Without any specific errors I would recommend reviewing Troubleshoot Adobe Download Assistant.

  • DVD::RIP Stops Responding [SOLVED]

    Howdy,
    I have just started to use DVD::RIP to try and backup some of my DVDs to XViD/DiVX.  However, everytime I try to rip one, DVD::RIP it seems to stop responding while it is trying to generate a preview image of the ripped movie.   The application can still be moved around within, tabs changed, but the ripping area items remain greyed out.  The status bar at the bottom stops updating, however the log files continue to update with the amount of time the process has been running.  According to the website, "This usually takes a few seconds, unless you're in the on-the-fly or DVD image mode, where this may need a minute."  I am not in either of the above modes, I am using the application suggested RIP to Hard Drive mode.  I have waited several times up to 15 minutes for this process to complete without any change.  I was wondering if anyone might be able to help me out?  Or point me to a better solution for DVD ripping and transcoding.  Thanks.

    I can't help you solve your problem with DVD::Rip, but I'd suggest you give HandBrake a try. It is a really easy to use command line tool for ripping and encoding DVDs and is by far the fastest DVD-ripper I've found. Quality is very good as well and it does stuff like detect cropping values automatically and very reliable. There's a precompiled binary for Linux on their forums if you fear to compile it on your own. You could also try Avidemux which a friend of mine suggested. He says it's the best tool for ripping DVDs, but I haven't tried it myself since I'm really satisfied with handbrake.
    There's also Thoggen, Winki The Ripper, OGMRip and probably many more others. But they can't compare to Handbrake IMHO.

  • Thumbnail view is not availabe on fresh install -- kde 4.5 [SOLVED]

    Hello,
    I've just reinstalled kde4.5 as minimal desktop. Everthing works great except in desktop folder the image preview mode is not working. Only icon view is available.
    Could anyone help me figuring out what could be wrong? Perhaps, I forgot to install something needed for this feature. Before I deleted my full blown kde install, this feature was available.
    The interesting thing is that when I open the desktop folder in dolphin the thumbnail view works fine. Only the desktop folder displayed on the desktop that doesn't show thumbnails.
    I've already searched the net but found no answer to the problem.
    Thanks,
    jmak
    Last edited by jmak (2010-09-14 20:32:06)

    Ok, the problem is solved. I created a second folder view in "Home mode" rather than "Destop mode" and the thumbnails showed up.

  • LXDE and Compiz Desktop partially stops responding [Solved]

    ok,
    So I decided to install Compiz on an LXDE install, don't ask me why I was bored. Well everything about it is running great, except that when ever I open a file or folder on the desktop it opens fine and I close it. I go to open a folder on the desktop and it will not open to save my life. So far it seems only libre documents will open consistently, but folders not so much. Any ideas? The folders will open once I have to logout of X and log back in and I can open one folder and close it and it reproduces the error every time.
    Last edited by mich04 (2012-02-04 16:49:14)

    So I figured out that it was because I had full directories on the desktop instead of shortcuts, thus it was causing the desktop to freeze.

  • Can't login after fresh installing gnome using gdm 3.2 [SOLVED]

    I don't know if this topic was already solved, I hope someone can help me about this. I have a fresh install of arch linux (just yesterday) and installed gnome and gnome-extra packages. As usual, I go with the procedure of editing my .xinitrc (exec ck-launch-session dbus-launch gnome-session), rc.conf (...dbus networkmanager...), inittab (runlvl 5, x:5......gdm). After a reboot, gdm screen appeared, I can't find my account, then there were two choices, "Sign in" and "Not listed..."). I clicked Not listed, then entered my user and password, after that, it responded: Authentication failure/failed... or something like that. I tried it again and it's the same. Temporarily, I'm using startx or slim (depends on my mood). Can anyone help me?
    here's my gdm's 0.log and 0-greeter.log respectively:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
    X.Org X Server 1.11.1.901 (1.11.2 RC 1)
    Release Date: 2011-10-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux espionage 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686
    Kernel command line: root=/dev/disk/by-uuid/9645b27b-41ee-461a-b4f0-f5ba1794542c ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 24 October 2011 12:26:09PM
    Current version of pixman: 0.22.2
    Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 19:43:23 2011
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:0:2:0) 8086:27a2:1025:012f rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:27a6:1025:012f rev 3, Mem @ 0xdc180000/524288
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (==) Matched intel as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.16.0
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.11.1, module version = 2.3.0
    (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 0.4.2
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    (II) VESA: driver for VESA chipsets: vesa
    (II) FBDEV: driver for framebuffer: fbdev
    (++) using VT number 7
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (WW) Falling back to old probe method for vesa
    (WW) Falling back to old probe method for fbdev
    (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 0.0.2
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (**) intel(0): Relaxed fencing disabled
    (**) intel(0): Wait on SwapBuffers? enabled
    (**) intel(0): Triple buffering? enabled
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): 3D buffers tiled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): EDID for output LVDS1
    (II) intel(0): Manufacturer: SEC Model: 4442 Serial#: 0
    (II) intel(0): Year: 2006 Week: 0
    (II) intel(0): EDID Version: 1.3
    (II) intel(0): Digital Display Input
    (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
    (II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
    (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LTN141W3-L01
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3424400000000
    (II) intel(0): 00100103801e13780a87f594574f8c27
    (II) intel(0): 27505400000001010101010101010101
    (II) intel(0): 010101010101ee1a0080502010300c40
    (II) intel(0): 33002fbe100000190000000f00000000
    (II) intel(0): 00000000002387026400000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c544e31343157332d4c30310a0064
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output LVDS1
    (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output TV1
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) intel(0): Kernel page flipping support detected, enabling
    (**) intel(0): Display dimensions: (300, 190) mm
    (**) intel(0): DPI set to (108, 106)
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (II) Unloading vesa
    (II) Unloading fbdev
    (II) Unloading fbdevhw
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i915
    (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (II) put_image
    (II) get_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i915
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.6.0
    (II) Using input driver 'evdev' for 'Power Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (--) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (--) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event2"
    (--) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
    (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event9"
    (--) A4TECH USB Device: Found 1 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found absolute axes
    (--) A4TECH USB Device: Found x and y absolute axes
    (--) A4TECH USB Device: Found keys
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Configuring as keyboard
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 9)
    (EE) A4TECH USB Device: failed to initialize for relative axes.
    (WW) A4TECH USB Device: found 37 axes, limiting to 36.
    (II) A4TECH USB Device: initialized for absolute axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event10)
    (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event10"
    (--) A4TECH USB Device: Found 20 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found x and y relative axes
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 10)
    (II) A4TECH USB Device: initialized for relative axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event11)
    (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Acer CrystalEye webcam: always reports core events
    (**) Acer CrystalEye webcam: Device: "/dev/input/event11"
    (--) Acer CrystalEye webcam: Found keys
    (II) Acer CrystalEye webcam: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.11.0, module version = 1.5.0
    (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
    (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver/identifier specified (ignoring)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Unloading synaptics
    (II) AT Translated Set 2 keyboard: Close
    (II) Unloading evdev
    (II) Acer CrystalEye webcam: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) Sleep Button: Close
    (II) Unloading evdev
    (II) Video Bus: Close
    (II) Unloading evdev
    (II) Power Button: Close
    (II) Unloading evdev
    Server terminated successfully (0). Closing log file.
    gnome-session[1036]: DEBUG(+): Enabling debugging
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/espionage:@/tmp/.ICE-unix/1036,unix/espionage:/tmp/.ICE-unix/1036
    gnome-session[1036]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: setting client store 0x9fe2638
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1036]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1036]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1036]: DEBUG(+): fill: *** Adding required components
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1036]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1036]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1036]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1036]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1036]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1046
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581614780600000010360002 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1118
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient 10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226648300000010360001 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1046
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10acccb988624d95d5131971581226572800000010360000
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1133
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: New client '0xa00d0c0 []'
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Initializing client 0xa00d0c0 []
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 []' received RegisterClient(10acccb988624d95d5131971581226572800000010360000)
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226572800000010360000 to session
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Set properties from client '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: ProcessID = '1133'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: connecting to address: unix:abstract=/tmp/gdm-greeter-bvcleLaw,guid=ee40278e3f4d9eb0fe19bee0000000f2
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling GetDisplayId
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Creating proxy for /org/gnome/DisplayManager/Display1
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    JS LOG: GNOME Shell started at Thu Oct 27 2011 19:43:43 GMT+0800 (PHT)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling BeginVerification
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=InfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received InfoQuery (gdm-password, Username:)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SelectedUserChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SelectedUserChanged (vic)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SecretInfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SecretInfoQuery (gdm-password, Password: )
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Problem
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Problem (gdm-password, Authentication failure)
    JS LOG: error: Authentication failure
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=ConversationStopped
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received ConversationStopped (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling Cancel
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x8062560
    gnome-session[1036]: DEBUG(+): Got callback for signal 15
    gnome-session[1036]: DEBUG(+): GsmManager: Logout called
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.7
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, 9, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, c, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]')
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011e48
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received CloseConnection
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa00d0c0
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000])
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011cc8
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1036]: DEBUG(+): Unreffing manager
    gnome-session[1036]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045408
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045480
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1046): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Last edited by vic (2011-10-27 13:51:21)

    wonder wrote:
    vic wrote:
    wonder wrote:what's your user id?
    when asked for uuid/uid?... I put 100. I thought any random number would do...
    look in /etc/pam.d/gdm-password
    in arch and in general >= 1000 are  normal users, < 1000 system users
    is that how it works? can i change it from 100 to 1000 or just make a new one?
    anyways i'll look to it.

  • After installing 10.8.3 on Mac Pro, finder stops responding after 7-8 hours

    A week or two ago I installed the 10.8.3 update to my Mac Pro at work. Ever since, towards the end of every work day, after 7-8 hours of continuous work, the finder will just stop responding. I am usually alerted to this by trying to open a new file, only it won't open. I am then unable to restart or **** down and am forced to do a hard shut down to turn off the machine. Upon starting up the machine again, I do a permissions repair, then restart again. Then everything will work fine for another 7-8 hours. If I leave my machine on overnight, it won't work when I arrive for work in the morning, and I'll have to repeat the process above.
    I have tried running the free Maintenance software from Titanium Software, and that has not solved the problem. I was also concerned about font issues, so I ran the free version of FontDoctor, and it reported a bunch of things to fix. But I do not want to spend the $70 on the full version if that's not going to fix the problem.
    I spoke with an IT guy I work with, and he said it might be worth dealing with the hassle until the 10.8.4 update arrives.
    Any other suggestions?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
    Mac 101: Font Book
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case only, after running Font Book, launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo atsutil databases -remove
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

  • [SOLVED]MacBook Air (3,2) keyboard and trackpad stop responding int...

    Hey guys, I've now got arch running on my air perfectly I think, except for a random loss of trackpad and keyboard input. It happens even with a usb keyboard. I'm not sure if the whole laptop is freezing or only the inputs stop functioning, I believe it is the latter because things that blink or move onscreen like the cursor keep blinking. It happens both in X and out. I have no idea where to start for diagnosing.
    My current kernel line is this:
    options "ro root=LABEL=arch arch noapic irqpoll acpi=force noefi"
    I'm using nouveau but it also happens using fbdev. I can't get nvidia to work, it just blacks out the screen when starting X.
    Any hints are welcome
    EDIT: It just happened again, this time just after I clicked on a tab in firefox. I hit refresh, so the spinning circle came up on the tab, and the windows partially reloaded, then the mouse pointer stopped responding. The loading circle then stayed spinning indefinitely with the page failing to load any further.
    Further information:
    I removed noapic, irqpoll, arch (is that even a valid kernel option?) and noefi from the kernel line for this boot so that all that was left was acpi=force and it still booted happily. I'm not sure if I need any of those, I can't remember why I added them, probably to fix this keyboard issue. I'm booting through rEFInd so maybe I shouldn't have that noefi entry anyway.
    Last edited by MisterAnderson (2013-05-20 05:30:28)

    Solved, I removed all boot options and I'm guessing one of them was causing it.

  • Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

    tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

    Hey there Alex,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
    iCloud: iCloud Control Panel setup cannot be started - Apple Support
    So long,
    -Jason

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

    I am trying to reconnect a Win 7 Pro computer to a new  Essentials 2012R2 and when it asks me to set it up for just me or multiple users a message pops up saying
    it has stopped responding. It sets up a profile of _clientsetup_$ and it shows up in dashboard as an offline device. This computer was hooked up to an Essentials 2012R2 previously. Tried uninstalling the connector software, removing the computer from the domain,
    renaming the computer and re-installing the connector software from the http://(server)/connect. Even tried backing up the existing profiles and creating a new clean one and went through the above procedure with the same results. I set up 4 others
    with no issues and it would be the bosses computer that fails. I am a newbie so any help would be greatly appreciated, thanks.

    Hi,
    Sorry for my interrupting.
    Would you please let us know whether this problematic client computer was upgraded to Windows 7 Pro from a previous OS? Did you install any third-party application on this Windows 7 Pro client computer? Just a confirmation, thanks for your understanding.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

    Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • [Solved] Amilo XI 2550 - Black screen after fresh install

    Dear archlinux users,
    I have been reading the archlinux wiki and forums since I started using arch several years ago. It was always possible to solve the problems I ran into by consulting these webpages, therefore a big thanks to the community for the provided help.
    Two weeks ago I installed arch on a Fujitsu Siemens Amilo XI 2550. The first problem I ran into was that booting the live-cd resulted in a black screen and I could not even start with installing arch. This problem was solved with the kernel parameter 'nomodeset'.
    The first boot of the freshly installed arch also resulted in a black screen after the GRUB menu which was perfectly displayed. After some searching (here and here and ...) I plugged in an external monitor and it showed the login screen. I then installed KDE because I thaught the problem might not show up with X and KDE running. After the login to KDE I realized that the brightness of the laptop display is nearly black but not totally. It seems as if the brightness is at a very low level, but brightness cannot be controlled with the Fn+F8 or Fn+F9 commands. But I see a OSD that indicates that the controls are used but without effect. So at the moment it is only possible to work on the laptop with another display connected to it.
    Maybe of use:
    ls /sys/class/backlight/
    acpi_video0
    radeon_bl0
    less /sys/class/backlight/acpi_video0/bl_power
    0
    less /sys/class/backlight/acpi_video0/actual_brightness
    7
    less /sys/class/backlight/acpi_video0/brightness
    7
    less /sys/class/backlight/acpi_video0/max_brightness
    7
    less /sys/class/backlight/radeon_bl0/bl_power
    0
    less /sys/class/backlight/radeon_bl0/actual_brightness
    255
    less /sys/class/backlight/radeon_bl0/brightness
    255
    less /sys/class/backlight/radeon_bl0/max_brightness
    255
    dmesg | grep drm
    [ 0.736559] [drm] Initialized drm 1.1.0 20060810
    [ 0.743608] [drm] radeon kernel modesetting enabled.
    [ 0.743678] fb: switching to radeondrmfb from VESA VGA
    [ 0.744054] [drm] initializing kernel modesetting (RV630 0x1002:0x9583 0x1734:0x1107).
    [ 0.744065] [drm] register mmio base: 0xCFEF0000
    [ 0.744067] [drm] register mmio size: 65536
    [ 0.744172] [drm] Detected VRAM RAM=256M, BAR=256M
    [ 0.744174] [drm] RAM width 128bits DDR
    [ 0.744257] [drm] radeon: 256M of VRAM memory ready
    [ 0.744259] [drm] radeon: 512M of GTT memory ready.
    [ 0.744275] [drm] Loading RV630 Microcode
    [ 0.744345] [drm] Internal thermal controller without fan control
    [ 0.744386] [drm] radeon: power management initialized
    [ 0.744389] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.762830] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.762873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.762874] [drm] Driver supports precise vblank timestamp query.
    [ 0.762937] [drm] radeon: irq initialized.
    [ 0.794780] [drm] ring test on 0 succeeded in 1 usecs
    [ 0.795253] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 0.795942] [drm] radeon atom DIG backlight initialized
    [ 0.795945] [drm] Radeon Display Connectors
    [ 0.795947] [drm] Connector 0:
    [ 0.795948] [drm] LVDS-1
    [ 0.795950] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
    [ 0.795951] [drm] Encoders:
    [ 0.795952] [drm] LCD1: INTERNAL_LVTM1
    [ 0.795953] [drm] Connector 1:
    [ 0.795954] [drm] DIN-1
    [ 0.795955] [drm] Encoders:
    [ 0.795956] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [ 0.795957] [drm] Connector 2:
    [ 0.795958] [drm] HDMI-A-1
    [ 0.795960] [drm] HPD1
    [ 0.795961] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [ 0.795963] [drm] Encoders:
    [ 0.795964] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [ 0.795965] [drm] Connector 3:
    [ 0.795966] [drm] VGA-1
    [ 0.795968] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [ 0.795969] [drm] Encoders:
    [ 0.795970] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.278449] [drm] fb mappable at 0xD0141000
    [ 1.278451] [drm] vram apper at 0xD0000000
    [ 1.278453] [drm] size 9216000
    [ 1.278454] [drm] fb depth is 24
    [ 1.278455] [drm] pitch is 7680
    [ 1.278527] fbcon: radeondrmfb (fb0) is primary device
    [ 1.726069] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.770030] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
    Until now and amongst others I tried the following things.
    Using kernel parameters
    video.use_native_backlight=1
    video.use_native_backlight=0
    acpi_osi=linux
    acpi_backlight=vendor
    and others I just cannot remember.
    Masking backlight
    systemctl mask systemd-backlight@backlight:acpi_video0.service
    systemctl mask systemd-backlight@backlight:radeon_bl0.service
    Setting bl_power
    echo 1 > /sys/class/backlight/acpi_video0/bl_power
    echo 1 > /sys/class/backlight/radeon_bl0/bl_power
    Nothing of the above was improving the situation.
    Your help on the problem would be highly appreciated.
    Best regards
    mgs
    Last edited by mgs (2014-10-27 10:15:11)

    Hello Trilby,
    thanks for the reply.
    Trilby wrote:If nomodeset worked with the installation medium, why haven't you tried that for the same problem on your installed system?
    The kernel parameter 'nomodeset' results in a working display but without X support, due to the fact that with 'nomodeset' there is no KMS support and therefore no X. But nevertheless I tried it and as expected X did not start.
    Trilby wrote:Could you also post information about your graphics card and what drivers you've installed.
    The graphics card is a Radeon HD 2700 and according to the above dmesg log it is recognized as RV 630. The radeon module is loaded via /etc/mkinitcpio.conf and xf86-video-ati (1:7.5.0-1) is installed.
    I hope the provided information is what you asked for, thanks for your help.
    Best regards
    mgs

  • Fresh Install Mac - Licensing for this product has stopped working  Error: 6

    We just got the new macbook pro refreshes at work and decided to make the switch to standalone CFBuilder.   We downloaded the trial and installed.  On launch we get this error, "Licensing for this product has stopped working  Error: 6".  Every macbook had the same result.   All are running 2 Ghz Quad Core i7 with 8GB of ram.   All of them get the same error.    All have a fresh install of 10.6.6.   Other than installing Air before the CFBuilder install they have no other applications installed.   Other than Air, there are no other Adobe products installed.  All CFBuilders were installed under an admin account.
    We've tried all the troubleshooting.   Permissions, LicenseRecovery, Setting the clock back to 2010... we even tried reinstalling OSX, then installing acrobat, then air, then CFBuilder with the same result every time.   We even activated the root account on the system and installed under root.  Same result every time.    The Flexnet service never gets created unless we use the License recovery tool.   If we install the updater it still makes no difference.
    All options for CFBuilder are grayed out under help.   Registration, Deactivation, Updates...
    Any suggestions?

    Thanks for posting and letting me know. Yes, it is crappy to have to work-around it like that. I noticed when I installed
    Builder that it over-wrote some newer files, but I said "Okay to All". I'm using CS4 not CS5 and my newer files were probably better. I'm glad you got your program working at least. My problem is I started my first Project at the wwwroot level, like all the instructions say. It wasn't until I saw Ben Forta's video of it that I realized I was supposed to start a new folder within the wwwroot folder as my Project folder. Now I can't get rid of my first Project folder without DELETING all of the files in wwwroot, WHICH I CANNOT DO. MANY OF THE FOLDERS THERE ARE WORKING WEB SITES! If you know of any way to detach that original Project, I'd sure like to know how to do it.
    Thanks,
    Tedra

  • Illustrator CC 2014 won't launch (Could not complete the requested operation) even after fresh install (3 times), anyone know how to solve? (Windows 8.1)

    Hi guys, my Illustrator CC 2014 won't launch, getting an error message "Could not complete the requested operation", this is not a specific file issue I can't launch Illustrator stand alone.  I've un-installed and re-installed about 3 times and contacted support but they haven't been able to solve as of yet.  It's a relatively fresh install of windows 8.1 and no custom fonts have been added.  I've tried deleting the preferences folders and launching and that has not had any effect.  No idea what else I can do, any help would be greatly appreciated.
    Edit: Forgot to mention I have also tried running Illustrator as administrator and that Illustrator was running perfectly fine on this computer since install (about 2 weeks) before this started happening.
    Thanks
    Chris

    Hi Jacob, I decided to completely remove the entire creative suite from my computer, ran the cleaning tool (although some errors showed in the log file) and it now works! Let's just pray it stays this way haha.  Thanks for the suggestion.
    Log File:
    [Thu Mar 05 10:18:58 2015] Choose from one of the following options to clean up :
    [Thu Mar 05 10:18:58 2015] 1.  All
    [Thu Mar 05 10:18:58 2015] 2.  Adobe Flash Player 10.2
    [Thu Mar 05 10:18:58 2015] 3.  Creative Cloud 2014 , Creative Cloud & CS6 Products
    [Thu Mar 05 10:18:58 2015] 4.  Creative Cloud 2014 only
    [Thu Mar 05 10:18:58 2015] 5.  Creative Cloud only
    [Thu Mar 05 10:18:58 2015] 6.  CS6 only
    [Thu Mar 05 10:18:58 2015] 7.  CS5-CS5.5-CS6
    [Thu Mar 05 10:18:58 2015] 8.  CS5-CS5.5
    [Thu Mar 05 10:18:58 2015] 9.  CS3, CS4
    [Thu Mar 05 10:18:58 2015] 10.  Adobe Id credentials
    [Thu Mar 05 10:18:58 2015] 11.  Quit
    [Thu Mar 05 10:18:58 2015] Choice :>
    [Thu Mar 05 10:19:00 2015] User selected: All
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Thu Mar 05 10:19:00 2015] List of products installed on this machine
    [Thu Mar 05 10:19:00 2015] Listing products for cleanup:
    [Thu Mar 05 10:19:00 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
    [Thu Mar 05 10:19:04 2015] Are you sure you want to clean all the listed products and associated files?
    [Thu Mar 05 10:19:04 2015] Type (y) to confirm and remove or (n) to quit ... >>
    [Thu Mar 05 10:19:06 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
    [Thu Mar 05 10:19:06 2015] OSVersion : 64-bit
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:Adobe Creative Cloud
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:AdobeCEPServiceManager
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsManifestBaseURL
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsUpdateCheckInterval
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:LogLevel
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AAM
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.1
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.2
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\Users\Public\Desktop\Adobe Creative Cloud.lnk
    [Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Creative Cloud.lnk
    [Thu Mar 05 10:19:06 2015] CoreSync custom hook not found
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Retry deleting the folder since folder still exists
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Some files could not be cleaned up. Please try closing your internet/web browser, and rerun the Cleaner Tool to complete your clean-up.
    [Thu Mar 05 10:19:06 2015] :: Cleaning-up left over inventories ::
    [Thu Mar 05 10:19:06 2015] Inventory: 'AdobeApplicationManager-1.0' Type: SelfUpdate, Action: NoDelete
    [Thu Mar 05 10:19:06 2015] Found AAMref : ACC.aamref
    [Thu Mar 05 10:19:06 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: True
    [Thu Mar 05 10:19:06 2015] Removing content of Product : CS5Installer, Version : CS5
    [Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] LOG FILE SAVED TO: C:\Users\Chris\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
    [Thu Mar 05 10:19:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
    [Thu Mar 05 10:19:07 2015]
    [Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Thu Mar 05 10:19:07 2015] ---------------------------------------------------------
    [Thu Mar 05 10:19:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
    [Thu Mar 05 10:19:07 2015] ---------------------------------------------------------

Maybe you are looking for

  • How to input data into an arraylist from a text file?

    I am trying to take data from a text file and put that data into an arraylist. First here is the text file: [item1, 10, 125.0, item2, 10, 12.0, item3, 20, 158.0] 3 4530.0 [item5, 65, 555.5, item4, 29, 689.0] 2 56088.5 [item7, 84, 34.5, item6, 103, 0.

  • Access data from 2 SAP systems into WebDynpro..Please guide :)

    Hello, Is is possible to access/retrieve data from 2 seperate SAP systems in Web Dynpro? To ellaborate more: Under normal situation - We create a Model using which you can access the required BAPI/RFC and using the JCo this connection is complete. So

  • Sending Alerts from PC

    Hello All, I am working on sending alerts from PC, I followed below steps. 1. Go to ALRTCATDEF 2. Select classification "Process Chains" 3. Click on display/change 4. Double-click on "error in a process of a process chain" 5. Click on "fixed recipien

  • Seeburger Payment Adapter

    Hi, Can anybody help me about the following: EDIFACT element. The element identifier has the format <segmentid>.<element>. For example: USY.0571 or USC#1.0536. This is used in Seeburger PI Adapter Adressbook for creation of AUTACK Message I need to f

  • AJVOAF: Present record is getting is vanished when going for next record

    Dear Friends, In a table region i have 3 LOVs -- Material ,Subinventory and Locator ( I have made Subinventory and Locator LOVs as read only....as per Requirement) when material lov is clicked it displays material,subventory and locator. (After Mater