Fresh install Mavericks, then install OSX Server 3.1.1, it doesn't work

Using a mac mini.
Wiped the hard drive clean.
Installed Mavericks.
Created 1 user.
Right away, went to the App Store and installed OSX Server.
Ran the Server.app.
It said everything went ok.
It didn't.
Trying to see what could have gone wrong. I found the /Library/Server/PostgreSQL/Data is empty and the logs keep spamming how nothing can connect to the Postgre Database.
I will try to get more logs in here. However I am trying an install from the recovery partition at the moment.
Any help/insight would be greatly appreciated.
Cheers,
k.

Forgot to update the Forum.
Latest firmware did resolve the issue !!
Thanks & Regards.

Similar Messages

  • I just installed Maverick to my imacG5 and now my Office 2004 doesn't work??

    I just installed Maverick to my imacG5 and now my Office 2004 doesn't work?? Where do I go from here??
    Thanks.

    You have given us inaccurate info about your iMac.
    The G5 iMac is all white and runs a IBM Power PC (non-Intel)  CPU that cannot run any OS X version above OS X 10.5.8.
    OS X 10.6- 10.9 all run on much newer Intel CPU iMacs that have aluminum enclosures.
    Typically, mid-2007 models and later.
    The iMac model you described can't possibly run OS X 10.9 Mavericks.
    Please download, install and run Etrecheck.
    Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and all installed software.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we have accurate information about IMac to help both you and us begin to troubleshoot and solve the performance and technical issues with your Mac running OS X 10.9 Mavericks.
    Thank You.

  • HT204135 I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

    I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

    Thanks Paul.
    I'm connected by USB cable. Tried looking for a Brother driver download but they do not provide one for this printer.
    If I delete all listed printers for the purpose of then doing a reset, will I not lose them all - as there is seemingly no appropriate driver - and finish worse off than I currently am?
    Regards
    Ephry

  • Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

    When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
    Photoshop CC

    Hi,
    Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
    If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
    Another option is remove extension manager database file, then launch Extension Manager to install it.
    C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
    /Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
    But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

  • I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

    I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

    The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
    OS X: Using and troubleshooting Back to My Mac with your iCloud account

  • Help for first install of macpro with osx server

    Hello to all
    it's my first message on this forum, i'm seeking for help because i'm kind of new with Mac systems.
    I'm gonna explain the problem
    So we are going to buy a mac pro and put 4*2To inside with raid 5 and osx server.
    The problem is that the cost of installation of sotwre and deployement etc is really expensive.
    I need to create a vpn too, this mac pro is gonna be a storage and multiple users must have acces to it. In fact this mac will be connected on the router and users will acces to it on local network then later we're gonna move from our base so the mac will be at the home of one of us and other users will have to access it from outside.
    I was thinking avoyding cost of install by doing it myself.
    So i've thinked that the best way to do it is by asking help to the community.
    Is anyone can help me with this or tell me where i can find tutorials to do it?
    I have skills but this is hard form me. The thing is that i learn fast. But i need help.
    Maybe my post is not really clear i write as it comes to me, english is not my langage too.
    So feel free to ask me questions or informations if you need.
    In the same time i'm reading posts on the foum about this kindof installations.
    Thank u so much
    .anto.

    Dear Marcassin
    i am happy to help to your problem .
    first i would say you must read the Documentation. and you should familier with Mac Os installation System.
    in your Mac Server DVD you will find the schedule sheet . print that and plan your server first. it will really help full. then come and list down the all the requirements.
    may be you will need more services after that.
    But again again again . read that sheet and fill all the requirements. and come back or read specific captors in the Documentation.
    if you want more details about the installing sachira.herath at gmail
     certified Pro 10.6/10.5

  • After installing Mavericks, dragging files to the apps in the dock no longer works.  Getting " The Application Can't Be Found" error

    Just installed Maverick and now the drag and drop file open from finder to dock apps doesn't work?
    Looks like spacebar for quick look isn't working correctly either

    I am annoyed by, I think, the same problem.  I would like to drag Pages files directly to the finder in the dock, but now with Mavericks I can not do this.  It is bothersome to have to click on the finder to open it up when I did not have to do that with the old operating system.  I hope someone can help us both out. 
    I also hope that in the next update Apple addresses the concerns many are having with the newest version of Pages.  Until something is changed, I am sticking with old Pages because I find it to be a much better program to use.  

  • Unable to access the internet on windows xp using bootcamp. I installed the bootcamp drivers ( from snow leopard) but it still doesn't work. I have parallels 6 also installed and IT works fine. I am missing a rtl network adapter-thanksr

    Hi
    I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
    Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
    I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
    What i see missing in my devices screen in XP is the network adapter.
    I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
    Thank you

    I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
    Good luck.

  • Install/Uninstall of Sun Studio 12... kinda sorta doesn't work.

    Hi !
    I'm installing DBI.pm [inside a zone] using cpan from blastwave. It needs cc and make so I installed SS 12.
    Then I found out that the CLI installer doesn't installed into the zones, and that you have to use the graphical one.
    So , I got in thru my KVM-over-ip and ran the graphical installer.
    Now the weird part is, the section of the installer where it asks you which components you'd like to install, nothing is checked off, and the interface wouldn't let me check anything off...
    So then I thought , maybe I need to uninstall it and start fresh, so I upgraded to JDK 1.6 just in case and then followed the instructions in this document
    http://developers.sun.com/sunstudio/documentation/ss12/release_notes.html
    However, every time I run java on the uninstaller, I get the exception that is mentioned, and that's why I upgraded to jdk 1.6 ahead of time..
    sandbox# java -cp . uninstall_Sun_Studio_12ea -nodisplay
    Exception in thread "main" java.lang.NoClassDefFoundError: uninstall_Sun_Studio_12ea
    sandbox#
    Every time. So I'm stumped. And all I want is DBI.pm ;) Help would be great, thanks folks.
    jeff.

    Hi Bignose,
    We tried installing and then uninstalling and all attempts failed. Do you know someone that might be interested in trying to install it on our system.

  • Silent install Oracle BPEL Process Manager 10.1.2.0.2 doesn't work

    We try a silent install of BPEL Process Manager, but it doesn't work. We use this batchfile: setup.exe -nowait -force -responseFile C:\Oracle_BPEL.rsp
    This is our responseFile:
    RESPONSEFILE_VERSION=2.2.1.0.0
    UNIX_GROUP_NAME=<Nicht festgelegter Wert>
    FROM_LOCATION="C:\BPEL\bpel_oc4j\stage\products.xml"
    FROM_LOCATION_CD_LABEL=<Nicht festgelegter Wert>
    ORACLE_HOME="C:\Programme\OraBPEL"
    ORACLE_HOME_NAME="OraBPELPM1"
    We use a German Windows XP SP2.
    The installation starts and creates an "OraInstall"-Directory in the TEMP-DIR. Then the installation stops (fails).
    Is there a possibility to create an error log? The switch "-debug" shows only the just running actions in a "DOS"-Window that closed itsself after the error. So we can't read the error massage.

    Could anybody post a functunaly response file?
    Thanks a lot!

  • Mac OSX Server 10.5 not allowing wikis to work.

    Hey everyone.
    Currently, where I work, we have two servers.
    One running OSX Server 10.4 (cause of all the problems associated with 10.5!) and another running 10.5. The one running 10.4 does all our DNS, DHCP, logins etc.
    The 10.5 server is only running Web, SMB, XGrid and Open Directory. Its primary use is to host our intranet, cause we want wikis and blogs to work. The 10.5 Server we have is running Open Directory (connected to a directory system, since 10.4 cant replica to 10.5 and visa versa) so we can just have the login data.
    The problem we are having is: When we go into Workgroup Manager, select a group, the options to enable the following services for this group on...has nothing in the list.
    We have been to Server Admin, gone to Web, gone to sites, turned all the services on...made our site done all that. Its just the option in Workgroup Manager that isn't working. Can anyone shed some light to why this wouldn't be working?

    You need to make sure that the group you are enabling the services for is in the LDAP path for the 10.5 server, and not in the local directory or the LDAP for the 10.4 server.

  • I installed the new iOS 5 and now my text messaging doesn't work, how do i fix this?

    i was wondering if this is a hardware problem with my phone since it is a refurbished one, or if it has happened to other people as well.

    How are you trying to accomplish these two tasks?
    The correct way is as follows:
    Camera zoom: pinch with your fingers like you do when viewing pictures.
    Camera button in lock screen: Double-tap on the home button while in lock screen
    If you are already doing it that way and it doesn't work, then maybe someone else here has another idea.

  • Windows Server 2008 - Now F11 Recovery doesn't work

    Greetings all--
    I decided to experiment with my TouchSmart 504 and installed Windows Server 2008 (32 bit).  However, since 2008 doesn't seem to like the onboard NIC, I wanted to go back to Vista 64, but now the F11 option to go into system recovery doesn't work.  No matter how many times I press it, it just goes back into W2K8.  Being something less than smart, I didn't make any recovery disks (couldn't find where to do so).  I've ordered the recovery media, but is there anything I can do in the meantime?
    Thanks in advance.

    You did the right thing - use recovery discs. To see if the recovery data is still on the HD, go in and see if you still have the recovery partition on the hard drive.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • HELP! Uploading AS3 Game to server, no sound and Spacebar doesn´t work HELP!

    Hello, relatively new to AS3 and flash, this is the first time i am publishing anything. We are trying to upload our simple flashgame to our webserver, the game works perfectly fine locally save for one thing. We get an error regarding TLF which says it wont stream or something. So when it gets online, no sounds play and spacebar doesn't work, left and right arrow does work. We have three TLF text fields that are used to update score, lives and show you final score. If i turn these into classical text they stop working.
    Things we have tried: Changing default linkage from RLS to Merged into code, changing the text boxes to classical text(they then stop working), made sure the paths are correct(all files are in the same directory including the .swz file)
    This is the code from the soundclass:
    package 
        import flash.net.URLRequest;
        import flash.media.Sound;
        import flash.media.SoundChannel;
        import flash.events.*;
        public class MySound
            private var bgSound:Sound;
            private var fireSound:Sound;
            private var waterSound:Sound;
            private var earthSound:Sound;
            private var lightSound:Sound;
            private var soundChannel:SoundChannel;
            public function MySound()
                soundChannel = new SoundChannel();
                bgSound = new Sound();
                var req:URLRequest = new URLRequest("BackgroundSound.mp3");
                bgSound.load(req);
                //fire
                fireSound = new Sound();
                var req2:URLRequest = new URLRequest("soundFire.mp3");
                fireSound.load(req2);
                // water
                waterSound = new Sound();
                var req3:URLRequest = new URLRequest("soundWater.mp3");
                waterSound.load(req3);
                // earth
                earthSound = new Sound();
                var req4:URLRequest = new URLRequest("soundEarth.mp3");
                earthSound.load(req4);
                // light
                lightSound = new Sound();
                var req5:URLRequest = new URLRequest("soundLight.mp3");
                lightSound.load(req5);
            public function playBgSound()
                soundChannel = bgSound.play(0, 999999);
            public function stopBgSound()
                soundChannel.stop();
            public function playFireSound()
                fireSound.play();
            public function playWaterSound()
                waterSound.play();
            public function playEarthSound()
                earthSound.play();
            public function playLightSound()
                lightSound.play();
    I can somewhat get that sound can bugg out, but why does spacebar stop functioning? ANy help is greatly appreciated as this has to be delivered in twelve hours(published online) for a school assignment.

    Also might add publishing it locally in my own browser everything works, as does ofcourse playing it in flash itself. Changing from RLS to merged into code stops the error from coming, but doesn´t fix the problem on the server.
    Code from main class related to sound and spacebar:
    import flash.display.*;
        import flash.events.*;
        import flash.ui.Keyboard;
        import flash.text.TextField;
        import flash.media.Sound;
        import flash.net.URLRequest;
        import flash.events.MouseEvent;
        import flash.utils.Timer;
        import flash.events.TimerEvent;
        public class main extends MovieClip
            private var fireTimer:Timer; //delay between shots
            private var canFire:Boolean = true;
            private var mySound:MySound;
            private var bulletSpeed:Number = -450;
              public function main()
                //load sounds
                mySound = new MySound();
            private function playGame(event:MouseEvent)
                gotoAndStop(2);
                // initialize
                myLives = 5;
                myHitsNo = 0;
                weaponType = 1;
                mybullets = new Array();
                enemys = new Array();       
                myScoreTxt.text = "Score: " + myHitsNo;
                myLivesTxt.text = "Lives: " + myLives;   
                fireTimer = new Timer(400, 1);
                fireTimer.addEventListener(TimerEvent.TIMER, shootTimerHandler, false, 0, true);
                stage.addEventListener(KeyboardEvent.KEY_DOWN, listenKeyDown);
                stage.addEventListener(Event.ENTER_FRAME, addEnemy);
                stage.addEventListener(Event.ENTER_FRAME, checkCollision);   
                player = new thePlayer(stage.stageWidth-40, spawnPoint2);// stage.stageHeight/2);
                stage.focus = player;
                addChild(player);
                mySound.playBgSound();
    public function listenKeyDown(event:KeyboardEvent)  // Controls and weapontype selector
                if (event.keyCode == 37) //left
                    player.movethePlayerDown();
                if (event.keyCode == 39) //right
                    player.movethePlayerUp();
    if (event.keyCode == Keyboard.SPACE) //space
                    shootBullet();
                    //soundFX.attachSound("Pistol Fire.wav");
                    //soundFX.start();

  • Delete messages from server when deleted from iTouch doesn't work

    Hi everybody,
    Two questions really...
    One is that with my 2nd gen iTouch I was able to set IMAP settings and it would show all of the folders (other than Inbox) that I have created on my mail account. The 4th gen iTouch doesn't seem to let me see the sub-folders.
    The second is that I have my account set to delete messages from the server when they are deleted from my Inbox, but that simply doesn't work.
    This is withe the iTouch 4 and OS 4.1 (8B117)
    Any suggestions?
    Thanks

    Is it possible that I have the wrong Server Port entered? I didn't fill in that field at all. I think it was filled in automatically. I guess I would have to contact my hosting company's support team to know what the server port is.

Maybe you are looking for