Fresh Install of Tiger and System Check?

What is it that people are talking about when they say they receive their mac and then do a fresh install of tiger? Can somebody give me the how's and why's for doing this?
Also, being new to mac, I'm not sure how to check my mac to ensure everything is running smoothly. What are the system checks that one can do through tiger to ensure you didn't receive a dud.
Thanks

All Macs are shipped with a preinstallation of mac OS X 10.4 (Tiger). The fresh install is useful for two reasons…
1) It allows you to erase the drive and zero the drive. This gives the software an opportunity to map out bad blocks on your drive, if any, what can cause issue later on. This is more for the slightly paranoid, like myself.
2) It enables an opportunity to do a custom installation which might be desired for reason like space savings etc.
The way to do is rather simple, insert your installation DVD and restart holding down the c key. It will then boot off the DVD and start off the installation process. One trick though is that when you are asked which hard disk to there is an option button at the bottom of the screen which allows you to erase the drive before the installation. You select thing if you want to do a completely new installation.
By the eay, to zero out the drive you need to launch Disk Utility and do it there. You can select it from the menus. You should do this as soon as you can BEFORE you select which disk to do the installtion on.

Similar Messages

  • How do I do a Clean install of Tiger and Classic?

    My G4 came with Jaguar. OS 9 was part of the complete installation, that you could install or choose not to install. My computer has been having a lot of issues lately and I think that a clean install would be a good idea, especially, since I used an upgrade to install Panther and then installed Tiger on top of Panther. I want to install classic and Tiger. How do I do this properly? Thanks

    I plan to back up my personal files and any
    downloaded software I have.
    Amazing that. You've told us that numerous times, but
    you've failed to provide us with information on
    HOW you're going to do this. That is, please
    explain WHAT you're using for the backup and
    WHERE you're planning on using to store the
    backup.
    All Power Macs come with the capability of burning CD's today. Mine can also burn DVD's, so backing up MY files is NOT a problem. I just can't clone my whole drive. Now, I'm not sure how this is pertinent in answering my question about how to properly do a clean install of Tiger and be able to install Classic. My son however, just told me he thinks that all I need to do is to clean-install Tiger. Then, insert the installation CD with classic on it that came with my computer. Find the invisible file, which is a disk image and drag the contents of the disk image to my computer. If anyone can tell me if this is correct, I would appreciate it.

  • I had a computer crash and completed a Fresh install of Win7 and  restore of all files from Carbonite.  I have managed to get LR 5 running in LR.  However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have

    I had a computer crash and completed a Fresh install of Win7 and  restore of all files from Carbonite.  I have managed to get LR 5 running in LR.  However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.

    <moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

  • I have a fresh install of Lion and upgraded to Safari 6.0.5

    I have a fresh install of Lion and upgraded to Safari 6.0.5 installed all patches and updates. Crashes immediately upon launch. Sig_Sev. Error.

    Try a safe boot by holding down shift key during boot
    Allan

  • [SOLVED] Fresh install read only file system

    I just did a fresh install of Arch this morning, and I have been trying to fix it most of the day. I was following the Beginner's Guide in the wiki as close as I could. (There were a couple items that didn't quite match up.) I only edited the files that it told me to, and then just minor edits. I checked out /etc/fstab during the process and noticed that none of my hard drives were present. I didn't think this was normal, so I opened another terminal and grabbed the UUIDs with ls -l /dev/disk/by-uuid/. I have two hard drives, but only sda1 (/) and sda2 (swap) showed up. (sdb1 is the entire second hard drive as /home.) Here is the default fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    /dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
    /dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    /dev/fd0 /media/fl auto user,noauto 0 0
    The example documentation indicated that the file should have lines similair to...
    /dev/disk/by-uuid/6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
    /dev/disk/by-uuid/5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
    /dev/disk/by-uuid/32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
    ...but then I found an example while searching around that showed the lines like this:
    UUID=6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
    UUID=5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
    UUID=32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
    In the first scenario, everything boots like normal, but when I tried to do anything that required writing to disk, the operation failed with a message about the file system being read-only. (I was trying to edit some config files because I couldn't get online.) Mind you, I was working as root the whole time, because I hadn't even gotten to adding a user yet. The only way I could make changes was to boot a live cd, mount, edit, reboot. remember to remove the live cd, reboot again, repeat.
    In the second version of fstab, the bootup process kept trying to check the disk for errors. When it was done it wanted to reboot. Then it tried to check again (presumably because it couldn't save the fact that it had already checked).
    I am at a loss. I really wish to use Arch Linux. I've been baby-fed for quite a while on Ubuntu, but it always ran slow. Please somebody help me! I am happy to provide more information; just let me know what you need.
    Last edited by ravinggenius (2008-07-05 18:33:22)

    Thank you so much for pointing out that typo! Turns out that is what was wrong. Well plus two of uuids had one typo each....
    Also from what I can tell it doesn't matter which format I use for the uuids in fstab. I will use the UUID=xxxxx... version unless somebody can tell me why I shouldn't.

  • Fresh Install of Yosemite and still spinning beachballs...

    Hey all, I've been having this spinning beachball issue for a long time now and it's really annoying. I just did a fresh install of Yosemite. My Mac Mini downloaded Yosemite from the Apple servers. I just turned on my Mac Mini to test it out and the spinning beachballs are back...
    There must be a way I can fix this without erasing the whole drive and installing each app one at a time...
    Could someone please help me?
    Thanks for any help!

    Here it is:
    EtreCheck version: 2.1.8 (121)
    Report generated 22 February 2015 10:37:08 am AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
    Mac mini (Mid 2011) with Intel HD Graphics 3000.
    Mac mini - model: Macmini5,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
    BANK 0/DIMM0
    4 GB DDR3 1333 MHz ok
    BANK 1/DIMM0
    4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
    DELL ST2220L spdisplays_1080p
    System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 13:9:31
    Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500.11 GB)
    EFI (disk0s1) <not mounted> : 210 MB
    Macintosh HD (disk0s2) / : 499.25 GB (78.37 GB free)
    Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    USB Information: ℹ️
    Logitech USB Keyboard
    composite_device 15.52 GB
    STORE N GO (disk1s1) /Volumes/STORE N GO : 15.52 GB (1.18 GB free)
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Plantronics Plantronics .Audio 628 USB
    SIGMACHIP Usb Mouse
    Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
    Mac App Store and identified developers
    Kernel Extensions: ℹ️
    /Library/Extensions
       [loaded] at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
    /System/Library/Extensions
       [not loaded]  com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) [Click for support]
       [loaded] com.netralia.driver.VBMicDriver (1.0.0 - SDK 10.7) [Click for support]
       [loaded] com.netralia.driver.VBSpeakerDriver (1.0.0 - SDK 10.7) [Click for support]
       [not loaded]  com.sony.driver.prs2 (1.0.3d1) [Click for support]
    /Users/[redacted]/Downloads/LCC Installer-1.app
       [not loaded]  com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) [Click for support]
    Problem System Launch Agents: ℹ️
       [failed] com.paragon-software.NTFS.SparkleUpdate.plist [Click for support]
       [running] com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
       [running] at.obdev.LittleSnitchUIAgent.plist [Click for support]
       [not loaded]  com.adobe.AAM.Updater-1.0.plist [Click for support]
       [running] com.Logitech.Control Center.Daemon.plist [Click for support]
       [loaded] com.oracle.java.Java-Updater.plist [Click for support]
       [running] com.rosettastone.rosettastonedaemon.plist [Click for support]
       [not loaded]  com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
       [not loaded]  com.teamviewer.teamviewer.plist [Click for support]
       [not loaded]  com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
       [running] at.obdev.littlesnitchd.plist [Click for support]
       [loaded] com.adobe.fpsaud.plist [Click for support]
       [loaded] com.adobe.SwitchBoard.plist [Click for support]
       [loaded] com.anchorfree.ajaxserver.plist [Click for support]
       [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
       [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
       [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
       [loaded] com.teamviewer.Helper.plist [Click for support]
       [not loaded]  com.teamviewer.teamviewer_service.plist [Click for support]
    User Launch Agents: ℹ️
       [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
       [loaded] com.adobe.ARM.[...].plist [Click for support]
       [loaded] com.google.keystone.agent.plist [Click for support]
       [loaded] com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
    Dropbox Application (/Applications/Dropbox.app)
    Little Snitch Configuration Application (/Applications/Little Snitch Configuration.app)
    AirPlayitServerManager Application (/Applications/AirPlayit.app/Contents/Resources/AirPlayitServerManager.app)
    Internet Plug-ins: ℹ️
       Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
       Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
       nplastpass: Version: 2.0.25 [Click for support]
       Silverlight: Version: 4.1.10329.0 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 51 Check version
    User internet Plug-ins: ℹ️
       Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Safari Extensions: ℹ️
    LastPass
    Audio Plug-ins: ℹ️
    EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
       CallRecorder: Version: v2.5.12 - SDK 10.8 [Click for support]
    3rd Party Preference Panes: ℹ️
       Flash Player  [Click for support]
       Flip4Mac WMV  [Click for support]
       Java [Click for support]
       Logitech Control Center  [Click for support]
       Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    Macintosh HD: Disk size: 499.25 GB Disk used: 420.88 GB
    Destinations:
    TM [Local]
    Total size: 999.54 GB
    Total number of backups: 39
    Oldest backup: 2014-04-18 11:07:44 +0000
    Last backup: 2015-02-20 07:01:12 +0000
       Size of backup disk: Too small
    Backup size 999.54 GB < (Disk used 420.88 GB X 3)
    Top Processes by CPU: ℹ️
    19% WindowServer
    8% soffice
    2% Evernote
    2% Little Snitch Agent
    0% fontd
    Top Processes by Memory: ℹ️
    945 MB Finder
    490 MB WindowServer
    421 MB softwareupdated
    215 MB soffice
    163 MB Evernote
    Virtual Memory Information: ℹ️
    1.33 GB Free RAM
    3.55 GB Active RAM
    2.14 GB Inactive RAM
    1.57 GB Wired RAM
    4.37 GB Page-ins
    168 KB Page-outs
    Diagnostics Information: ℹ️
    Feb 22, 2015, 10:10:31 AM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-22-101031_[redacted].cra sh
    Feb 21, 2015, 11:25:30 PM /Library/Logs/DiagnosticReports/Skype_2015-02-21-232530_[redacted].hang
    Feb 21, 2015, 09:23:16 PM Self test - passed
       Feb 20, 2015, 06:03:25 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-02-20-180325_[redact ed].cpu_resource.diag [Click for details]
       Feb 20, 2015, 05:48:59 PM /Library/Logs/DiagnosticReports/WindowServer_2015-02-20-174859_[redacted].cpu_r esource.diag [Click for details]
       Feb 20, 2015, 04:57:38 PM /Library/Logs/DiagnosticReports/iAntivirus_2015-02-20-165738_[redacted].cpu_res ource.diag [Click for details]
       Feb 20, 2015, 01:55:00 PM /Library/Logs/DiagnosticReports/coreservicesd_2015-02-20-135500_[redacted].cpu_ resource.diag [Click for details]
    Feb 20, 2015, 01:36:26 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-133626_[redacted].cra sh
    Feb 20, 2015, 01:10:44 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-131044_[redacted].cra sh
    Feb 20, 2015, 01:10:14 PM /Library/Logs/DiagnosticReports/soffice_2015-02-20-131014_[redacted].hang
    Feb 20, 2015, 01:08:12 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-130812_[redacted].cra sh
    Feb 20, 2015, 12:54:21 PM /Library/Logs/DiagnosticReports/soffice_2015-02-20-125421_[redacted].hang
    Feb 20, 2015, 12:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/TrueCrypt_2015-02-20-124911_[r edacted].crash
       Feb 18, 2015, 04:04:28 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-18-160428_[redacted].panic [Click for details]

  • [Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

    I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot.  When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
    [ 24.856]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 24.857] X Protocol Version 11, Revision 0
    [ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
    [ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
    [ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 24.857] Build Date: 31 July 2014 11:53:19AM
    [ 24.857]
    [ 24.857] Current version of pixman: 0.32.6
    [ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
    [ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
    [ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 24.897] (==) ServerLayout "Layout0"
    [ 24.897] (**) |-->Screen "Screen0" (0)
    [ 24.897] (**) | |-->Monitor "Monitor0"
    [ 24.905] (**) | |-->Device "Device0"
    [ 24.905] (**) |-->Input Device "Keyboard0"
    [ 24.905] (**) |-->Input Device "Mouse0"
    [ 24.905] (==) Automatically adding devices
    [ 24.905] (==) Automatically enabling devices
    [ 24.905] (==) Automatically adding GPU devices
    [ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 24.914] Entry deleted from font path.
    [ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 24.914] Entry deleted from font path.
    [ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 24.914] Entry deleted from font path.
    [ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 24.914] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 24.914] (WW) Disabling Keyboard0
    [ 24.914] (WW) Disabling Mouse0
    [ 24.914] (II) Loader magic: 0x818d80
    [ 24.914] (II) Module ABI versions:
    [ 24.914] X.Org ANSI C Emulation: 0.4
    [ 24.914] X.Org Video Driver: 18.0
    [ 24.914] X.Org XInput driver : 21.0
    [ 24.914] X.Org Server Extension : 8.0
    [ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
    [ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 24.919] (II) LoadModule: "glx"
    [ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
    [ 25.974] compiled for 4.0.2, module version = 1.0.0
    [ 25.974] Module class: X.Org Server Extension
    [ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
    [ 25.974] (II) LoadModule: "nvidia"
    [ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 26.027] compiled for 4.0.2, module version = 1.0.0
    [ 26.027] Module class: X.Org Video Driver
    [ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
    [ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
    [ 26.042] (II) UnloadModule: "nvidia"
    [ 26.042] (II) Unloading nvidia
    [ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
    [ 26.042] (EE) No drivers available.
    [ 26.042] (EE)
    Fatal server error:
    [ 26.042] (EE) no screens found(EE)
    [ 26.042] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 26.042] (EE)
    It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log.  My dmesg looks like this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 000000000 mask F00000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 120000000 mask FF0000000 write-back
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
    [ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
    [ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
    [ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
    [ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
    [ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
    [ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048381
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13247 pages used for memmap
    [ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
    [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.000000] tsc: Detected 2333.276 MHz processor
    [ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
    [ 0.006685] pid_max: default: 32768 minimum: 301
    [ 0.006695] ACPI: Core revision 20140424
    [ 0.012534] ACPI: All ACPI Tables successfully acquired
    [ 0.013368] Security Framework initialized
    [ 0.013377] Yama: becoming mindful.
    [ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.018300] Initializing cgroup subsys memory
    [ 0.018326] Initializing cgroup subsys devices
    [ 0.018334] Initializing cgroup subsys freezer
    [ 0.018338] Initializing cgroup subsys net_cls
    [ 0.018344] Initializing cgroup subsys blkio
    [ 0.018375] CPU: Physical Processor ID: 0
    [ 0.018376] CPU: Processor Core ID: 0
    [ 0.018379] mce: CPU supports 6 MCE banks
    [ 0.018387] CPU0: Thermal monitoring enabled (TM2)
    [ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    [ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.019569] ftrace: allocating 20434 entries in 80 pages
    [ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
    [ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063333] ... version: 2
    [ 0.063333] ... bit width: 40
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 000000ffffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 3
    [ 0.063333] ... event mask: 0000000700000003
    [ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083412] x86: Booting SMP configuration:
    [ 0.083415] .... node #0, CPUs: #1 #2 #3
    [ 0.130014] x86: Booted up 1 node, 4 CPUs
    [ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
    [ 0.133346] devtmpfs: initialized
    [ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
    [ 0.137923] pinctrl core: initialized pinctrl subsystem
    [ 0.137968] RTC time: 1:49:28, date: 09/18/14
    [ 0.138025] NET: Registered protocol family 16
    [ 0.138158] cpuidle: using governor ladder
    [ 0.138160] cpuidle: using governor menu
    [ 0.138185] ACPI: bus type PCI registered
    [ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.138270] PCI: not using MMCONFIG
    [ 0.138272] PCI: Using configuration type 1 for base access
    [ 0.153430] ACPI: Added _OSI(Module Device)
    [ 0.153430] ACPI: Added _OSI(Processor Device)
    [ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.157331] ACPI: Dynamic OEM Table Load:
    [ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
    [ 0.157716] ACPI: Dynamic OEM Table Load:
    [ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158103] ACPI: Dynamic OEM Table Load:
    [ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158489] ACPI: Dynamic OEM Table Load:
    [ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
    [ 0.158833] ACPI: Interpreter enabled
    [ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.158859] ACPI: Using IOAPIC for interrupt routing
    [ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.165516] PCI host bridge to bus 0000:00
    [ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    [ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    [ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    [ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    [ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
    [ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
    [ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
    [ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
    [ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
    [ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
    [ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
    [ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
    [ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
    [ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
    [ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
    [ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
    [ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
    [ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
    [ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
    [ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
    [ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
    [ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
    [ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
    [ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
    [ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
    [ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
    [ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
    [ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
    [ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
    [ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
    [ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
    [ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
    [ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
    [ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
    [ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
    [ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
    [ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
    [ 0.169663] pci 0000:02:00.0: supports D1 D2
    [ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
    [ 0.170025] pci 0000:01:05.0: supports D1 D2
    [ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
    [ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
    [ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    [ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
    [ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
    [ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.171253] vgaarb: loaded
    [ 0.171253] vgaarb: bridge control possible 0000:04:00.0
    [ 0.171253] PCI: Using ACPI for IRQ routing
    [ 0.179597] PCI: pci_cache_line_size set to 64 bytes
    [ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
    [ 0.179795] NetLabel: Initializing
    [ 0.179797] NetLabel: domain hash size = 128
    [ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.179813] NetLabel: unlabeled traffic allowed by default
    [ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.181019] Switched to clocksource hpet
    [ 0.187008] pnp: PnP ACPI init
    [ 0.187030] ACPI: bus type PNP registered
    [ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
    [ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
    [ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.188133] pnp: PnP ACPI: found 8 devices
    [ 0.188135] ACPI: bus type PNP unregistered
    [ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
    [ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
    [ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
    [ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
    [ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
    [ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
    [ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
    [ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
    [ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
    [ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
    [ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
    [ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    [ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    [ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
    [ 0.197657] NET: Registered protocol family 2
    [ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.198193] TCP: reno registered
    [ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.198298] NET: Registered protocol family 1
    [ 0.199202] pci 0000:04:00.0: Boot video device
    [ 0.199211] PCI: CLS 32 bytes, default 64
    [ 0.199266] Unpacking initramfs...
    [ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
    [ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
    [ 0.265383] Scanning for low memory corruption every 60 seconds
    [ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.268226] zbud: loaded
    [ 0.268426] VFS: Disk quotas dquot_6.5.2
    [ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.268644] msgmni has been set to 7909
    [ 0.268709] Key type big_key registered
    [ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.269162] io scheduler noop registered
    [ 0.269165] io scheduler deadline registered
    [ 0.269227] io scheduler cfq registered (default)
    [ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
    [ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.269839] intel_idle: does not run on family 6 model 23
    [ 0.269876] GHES: HEST is not enabled!
    [ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.270599] Linux agpgart interface v0.103
    [ 0.270658] rtc_cmos 00:01: RTC can wake from S4
    [ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.270984] TCP: cubic registered
    [ 0.271114] NET: Registered protocol family 10
    [ 0.271372] NET: Registered protocol family 17
    [ 0.271821] registered taskstats version 1
    [ 0.272365] Magic number: 14:261:812
    [ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
    [ 0.272539] PM: Hibernation image not present or could not be loaded.
    [ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.273769] Write protecting the kernel read-only data: 8192k
    [ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.286420] systemd-udevd[59]: starting version 216
    [ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.305975] ACPI: bus type USB registered
    [ 0.306007] usbcore: registered new interface driver usbfs
    [ 0.306020] usbcore: registered new interface driver hub
    [ 0.306135] usbcore: registered new device driver usb
    [ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.307076] ehci-pci: EHCI PCI platform driver
    [ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
    [ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
    [ 0.315748] SCSI subsystem initialized
    [ 0.317397] libata version 3.00 loaded.
    [ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.323598] hub 1-0:1.0: USB hub found
    [ 0.323608] hub 1-0:1.0: 4 ports detected
    [ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
    [ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.336926] hub 2-0:1.0: USB hub found
    [ 0.336936] hub 2-0:1.0: 8 ports detected
    [ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
    [ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
    [ 0.337866] hub 3-0:1.0: USB hub found
    [ 0.337875] hub 3-0:1.0: 2 ports detected
    [ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
    [ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
    [ 0.338347] hub 4-0:1.0: USB hub found
    [ 0.338355] hub 4-0:1.0: 2 ports detected
    [ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
    [ 0.338786] hub 5-0:1.0: USB hub found
    [ 0.338794] hub 5-0:1.0: 2 ports detected
    [ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
    [ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
    [ 0.339235] hub 6-0:1.0: USB hub found
    [ 0.339244] hub 6-0:1.0: 2 ports detected
    [ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
    [ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
    [ 0.339667] hub 7-0:1.0: USB hub found
    [ 0.339675] hub 7-0:1.0: 2 ports detected
    [ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
    [ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
    [ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
    [ 0.340109] hub 8-0:1.0: USB hub found
    [ 0.340117] hub 8-0:1.0: 2 ports detected
    [ 0.340263] ahci 0000:00:1f.2: version 3.0
    [ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 0.374399] scsi0 : ahci
    [ 0.374615] scsi1 : ahci
    [ 0.374814] scsi2 : ahci
    [ 0.375005] scsi3 : ahci
    [ 0.375196] scsi4 : ahci
    [ 0.375388] scsi5 : ahci
    [ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
    [ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
    [ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
    [ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
    [ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
    [ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
    [ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
    [ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
    [ 0.754296] hub 1-2:1.0: USB hub found
    [ 0.754373] hub 1-2:1.0: 7 ports detected
    [ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
    [ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
    [ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
    [ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.340399] ata3.00: configured for UDMA/133
    [ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
    [ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
    [ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
    [ 1.500227] scsi6 : usb-storage 2-5:1.0
    [ 1.500322] usbcore: registered new interface driver usb-storage
    [ 1.500694] usbcore: registered new interface driver uas
    [ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
    [ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
    [ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
    [ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
    [ 2.266750] Switched to clocksource tsc
    [ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
    [ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586591] usbcore: registered new interface driver usbhid
    [ 2.586594] usbhid: USB HID core driver
    [ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
    [ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
    [ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
    [ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
    [ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
    [ 2.628682] ata6.00: configured for UDMA/100
    [ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
    [ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
    [ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
    [ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
    [ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
    [ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
    [ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
    [ 3.257551] hub 1-2.7:1.0: USB hub found
    [ 3.257622] hub 1-2.7:1.0: 4 ports detected
    [ 3.316702] floppy0: no floppy controllers found
    [ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.027733] random: nonblocking pool is initialized
    [ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 4.403452] systemd[1]: Detected architecture 'x86-64'.
    [ 4.434571] systemd[1]: Set hostname to <yte>.
    [ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.264334] systemd[1]: Starting Remote File Systems.
    [ 5.264630] systemd[1]: Reached target Remote File Systems.
    [ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 5.265067] systemd[1]: Starting Paths.
    [ 5.265331] systemd[1]: Reached target Paths.
    [ 5.265342] systemd[1]: Starting Encrypted Volumes.
    [ 5.265614] systemd[1]: Reached target Encrypted Volumes.
    [ 5.265625] systemd[1]: Expecting device dev-sda3.device...
    [ 5.265819] systemd[1]: Expecting device dev-sda6.device...
    [ 5.266013] systemd[1]: Starting Root Slice.
    [ 5.275815] systemd[1]: Created slice Root Slice.
    [ 5.275829] systemd[1]: Starting User and Session Slice.
    [ 5.276279] systemd[1]: Created slice User and Session Slice.
    [ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
    [ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.277824] systemd[1]: Starting udev Kernel Socket.
    [ 5.278109] systemd[1]: Listening on udev Kernel Socket.
    [ 5.278123] systemd[1]: Starting udev Control Socket.
    [ 5.278410] systemd[1]: Listening on udev Control Socket.
    [ 5.278424] systemd[1]: Starting Journal Socket.
    [ 5.278716] systemd[1]: Listening on Journal Socket.
    [ 5.278736] systemd[1]: Starting System Slice.
    [ 5.279185] systemd[1]: Created slice System Slice.
    [ 5.279201] systemd[1]: Starting File System Check on Root Device...
    [ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 5.371945] systemd[1]: Mounting Temporary Directory...
    [ 5.379927] systemd[1]: Starting system-getty.slice.
    [ 5.380442] systemd[1]: Created slice system-getty.slice.
    [ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
    [ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
    [ 5.503309] systemd[1]: Started Load Kernel Modules.
    [ 5.503363] systemd[1]: Starting Apply Kernel Variables...
    [ 5.504202] systemd[1]: Mounting Configuration File System...
    [ 5.504898] systemd[1]: Mounted FUSE Control File System.
    [ 5.504935] systemd[1]: Mounting Huge Pages File System...
    [ 5.505656] systemd[1]: Mounting Debug File System...
    [ 5.506353] systemd[1]: Starting Setup Virtual Console...
    [ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.507863] systemd[1]: Starting Journal Service...
    [ 5.508912] systemd[1]: Started Journal Service.
    [ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [ 5.836201] systemd-udevd[175]: starting version 216
    [ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
    [ 6.237029] ACPI: Power Button [PWRB]
    [ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 6.237092] ACPI: Power Button [PWRF]
    [ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
    [ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
    [ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
    [ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
    [ 6.697724] sound hdaudioC0D0: inputs:
    [ 6.697726] sound hdaudioC0D0: Front Mic=0x19
    [ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
    [ 6.697731] sound hdaudioC0D0: Line=0x1c
    [ 6.697732] sound hdaudioC0D0: dig-in=0x1f
    [ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
    [ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
    [ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
    [ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
    [ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
    [ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.852178] iTCO_vendor_support: vendor-support=0
    [ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
    [ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
    [ 6.962065] mousedev: PS/2 mouse device common for all mice
    [ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
    [ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 9.356701] floppy0: no floppy controllers found
    [ 10.274611] r8169 0000:02:00.0 enp2s0: link down
    [ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 11.871962] r8169 0000:02:00.0 enp2s0: link up
    [ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies.  Would anyone be able to see where I am going wrong?
    Last edited by meschael (2014-09-18 04:16:08)

    The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
    +++++++++
    Update: Solved
    +++++++++
    I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting.  This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox.  Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
    Last edited by meschael (2014-09-18 04:15:30)

  • Fresh Install of iTunes and some Questions

    I just did a fresh install, set up home sharing, and did an iCloud match so my whole library is in the cloud.  I have my library file stored locally but my music files on my NAS.  Here are my questions:
    1.  I want to install iTunes on my wifes computer, set up iTunes match for her, set up shaing.  She will have a "shell" setup where notjing is stored as she is sharing with me and accessing the cloud.  Do I need to set up that computer under my user id even though she has her own?  I figure thats the only way to get her to iTunes match that I have?
    2.  How do I do this all?  Meaning, I will have a local library file for her but I need to point her laptop to the NAS with the files on them.  If I change her iTunes media file to that location on the NAS and check keep organized, will it screw up the files I have there?  I noticed when I did that on my PC it moved some fles around and I had to reassociate lost files to songs.  Took hurs.  Would iTunes have done that automatically for me somehow?  Should I not check the keep organized for her as she will not be adding music anyhow?  What is the harm either way?
    3.  How do I see my pictures on my ATV unit?  I thought I used to be able to but don't see an "app" on the ATV to do so, just photo stream which I do not want to do.  I thought I used to be able to access the pictures stored on my NAS?  Am I dreaming this or did it go away?  My NAS is an iTunes server and I swear I used to be able to access them from my ATV?    All I see on my ATV under my library is music, podcasts and movies. 
    4.  I have my NAS sharing (home sharing) and I can see it on my laptop with iTuenes installed.  When I click on it I see only music, no movies or anything else, why is that and is it something to do with home sharing?  But, like I said I can see thse movies on ATV under my library.  I can also see my playlists on the shared on my laptop but nothing is in them.  I think that may be becuase they were set up under another library and now that I hve a new library file, they don't carry over?  I don't see any of said playlists in the sttandard iTunes interface under playlists, just under the shared however like I said, no files in them.  Also, the share comes and goes as in sometimes I see it sometimes I don't however I am always able to access the NAS from iTunes.  Strange, may be network issues?
    5.  Along those same lines, sometimes the home share just up and dissapears from ATV.  Maybe a network issue?
    6.  Lastly, I just did my first backup/sync to my new laptop with the frsh install of iTunes on it.  It gave me some sort of message that I can only sync to one computer and do I want to overwrite or whatever?  I said no and it did nothing.  After that, I did a back-up however it seemed to go fast and I also did a sunc.  The sync was three steps, used to be like six and I did not notice any of my new apps being copied to it.  Something is wrong here but not sure what to do, ideas?
    Thanks in advance for any and all help.

    #4 - make sure you are sharing out all the items in your itunes library (music, movies, etc)
    you should be able to do that under preferences
    you may also want to check if it is pointing to the correct library
    #1 - home sharing should work on the LAN w/out the need for signing in; the shared libraries should appear under "shared" in the left sidebar of itunes
    think this may resolve the issues you have on #2 as well
    #2 - itunes doesnt seem like it's built for that, but if you have any experience, i'd like to hear it.  this seems why home sharing is the usually the best route to go and just have one instance of itunes managing the library
    but as long as the NAS or any media drives are shared out, connecting to it should not be a problem.  it's the writing to the itunes library that's the issue.  i haven't used Match so can't help there.
    depending on your OS, you can either ctrl-click or option-click on the itunes icon,
    which will also give you the option of selecting a library location upon launching itunes
    you can navigate to the location of the library file and point it to that.
    technically, you could do that but i believe the actual library has to be stored locally
    as long as you still have all the media, then you can just rebuild the library
    but for locally shared items, as in, all inside the home, i would leave icloud out of the equation
    just use itunes sharing and it should be fine

  • Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

    I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
    also with the WLAN connection. My ISP has checked their side and everything is fine.
    To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
    successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
    My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
    o/s to W7-Ult.
    Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
    Thanks in advance to all and for any advice.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

    Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
    machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
    Steam or the like causing interference.
    I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
    I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
    my Asus machine.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

  • How to do a fresh install of tiger on g4 ibook

    Hi everyone,
    I am wondering how I can do a fresh install of mac os tiger on my ibook with the cds that came with it. I am selling it and want to make it like its getting turned on for the first time and the person has to register and all that good stuff.
    Thanks.

    So pretty much all I need to do is just insert the cds and follow the directions?
    If you are referring to reinstalling, the answer is yes.
    Should i zero my startup disk also or should zeroing the harddrive be enough?
    The iBook's current startup disk IS the hard drive. When you boot from the install disc (CD/DVD) you will zero the hard drive in the iBook.

  • Can I remove/delete Windows Presentation Foundation Plug-in, Just did a fresh install of XP and all updates

    Just did a fresh install of winXP, updated the OS and installed the latest drivers I need.
    I have an older machine that runs great but i am getting a plug-in crash error
    Can I remove/delete Windows Presentation Foundation
    Thanks
    mike Daniels
    [email protected]

    Hi mikeinkent
    Your crash report indicate a problem with the Flash plugin (NPSWF32_11_5_502_146.dll).
    Please update Flash to the latest version.
    You can find the latest Flash player versions for Firefox on this page.
    *http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
    *http://www.adobe.com/support/flashplayer/downloads.html
    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting
    *http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

  • Copying Saved Data/Folders to a Fresh Install of Tiger

    Hi Gang
    My thanx to Kappy and Macjack for providing the file paths and information below.
    I'm doing a fresh install in a new HD. Have done this many times. Just making sure about a few things. I'm interested in the following Data/Folders which I will copy from the old drive before I remove it;
    /Home/Library/Application Support/AddressBook (copying the whole folder)
    /Home /Library/Safari (copying the whole folder)
    /Home/Library/Mail (copying the whole folder)
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    Just wanna make sure; Do I have remove/delete the original folders, then paste these in? Do I paste over the old folders?
    Thanx
    Mike

    Hey BD How are you?
    Ok well it's getting a wee bit confusing now;
    "but if you have anything in your present mail folder, move that folder to the desktop first" Don't know what you mean here, but I'm pretty sure I had handle on this.
    Any SAVED folders; Mail, Safari etc., (when put back in the right place), will automatically replace those folders. I understand this. I'll save the folders I mentioned above, before I remove the old drive. Then put them back where they belong in the new formatted drive, (a replacement drive). I'm the same original owner of both drives.
    I was also asking about old 'In' Mail, and 'Sent' Mail. Will all this data be returned/saved with the /Home/Library/Mail folder?
    "Did you save the Mail.plist from the other one?"
    Yes, and others too.
    "Did you setup the account on this one yet with the same info?"
    No, but I was going to.
    Thanx
    Mike

  • Installing multiple Instance and System Copy

    Hello All,
    In our customer landscape,we have a DEV Server and PRD server. Now the customer wants to install one more instance for Quality in the same DEV Server and then perform a system copy of PRD Server.(to make it 3 system landscape)
    How to perform this and what all the things to be considered before performing the same...?
    Kindly suggest.
    Thank You,
    Regards,
    Hasan

    It will install separate instance and same support pack level will come.
    You can see this video
    [System Copy and Migration]
    How to Perform a System Copy Export
    How to Perform a System Copy Import

  • Safest way to go after a fresh install of iTunes and Windows

    I had to wipe my PC, and my XML file got corrupted and the itl file lost. I went to sync just before I wiped it and got, the message about being able to sync to one library at a time.
    As I'm starting from zero again will the iPod recognise the new library as "fresh" and I'll have to wipe the iPod of all the tracks on it?. Which isn't really a problem, as they're all backed up on my external HD.
    Or can I put all my music back into iTunes with ratings, and hope the iPod accepts the fresh install?
    Which is the best way to go? Empty iTunes and wipe the iPod and start from scratch? Or try and hope it recognises the new install?

    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software (Free trial: Mac & Windows)
    PodUtil Software (Mac & Windows)
    YamiPod Software (Free: Mac & Windows)
    PodPlus Software (Windows)
    TuneJack Software (Windows)
    XPlay (Windows software For Music Recovery &/or Cross-Platform Functionality)
    XPlay Photo Browser (For recovering Photos)
    After recovering your Library, strongly consider developing a thorough and frequent backup strategy for just this type of situation (and many other potential disasters).
    You need at least two full sets of your music, not including what is on the iPod:
    a) One full set on the PC within iTunes (on internal HD or ExHD)
    b) One full set on an separate external backup medium (CD/DVD/ExHD/other)
    c) One (full or partial) set on the iPod
    Music files on just the iPod and only one other medium is not considered having any backup.
    If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a thorough Backup Strategy
    Best of Luck

  • Fresh install of Leopard and CS3 Install issues...

    I'm sorry to beat a dead horse, but I've done a bunch of searches and can't seem to get a definitive as to why CS3 won't run... specifically Illustrator and InDesign. Here's the backstory...
    I have a G5 Dual 2.0 (with 4mb ram). When running Tiger, CS3 works fine. I wanted to upgrade to Leopard, so I backed up my drive to an external drive. Did the complete nuke to install Leopard. Updated Leopard to the latest update, whilst fixing permission along the way. I did the install of CS3, and then the updates. Now, InDesign crashes on launch, and Illustrator will open... sometimes, but it will then crash when a new document is created, an existing file is double-clicked, etc.
    I have run the clean deinstall procedure and tried to install again... same results.
    Suggestions please! I want to use Leopard but at this rate I might not be able to.
    Thanks,
    Michael

    Hey thanx for the replies Buko and Neil. I went back through my notes and I did install in the correct order CS3 then CS4. So much going on it is a good thing that I made notes, too much multi-tasking. Anyway, I guess I should correct myself and say that I installed CS3 then CS4 with no problems. I began to launch the various apps and found that AE CS3 and SB CS3 were not recognized, the CS4 versions were okay. They both had the NO symbol (circle with diagonal line) and would give an error when I tried to launch. The error was something along the lines of "software is not supported by this architecture". At first I thought it may be something with the sound settings or perhaps some minor glitch with the OS because I did not receive any warnings during installation. I ran the OS updater until it said I was up to date then started working on the Adobe updates. I never got an update for the two apps in question so I did a manual update on AE CS3 only to get the warning that the updater could not find the app. This got me thinking about uninstalling everything so I popped in the CS3 install cd and took a look at "reinstall" feature which listed AE and SB as not currently installed. I ran the installer for each app and after a lot of disk swapping between CS3 and CS4 it worked. All is well again.
    Now some may ask why did I put myself through all of this torture? This is for a classroom environment and we are offering training on both versions of the Adobe software. This is still easier than reimaging all of the class machines each time the class changes. I am looking forward to playing around with Time Machine to see if and how I can implement it into my workflow.
    Neil, I figured that I would not be able to install Tiger but I was hoping. I have ghost images of previous builds that would make my life a lot easier if they would work. I actually got the image onto the new iMac but performance was flakey.
    Thanx again for the input. I hope that my experiences can help someone else. Any questions feel free to email me.

Maybe you are looking for

  • A Better Way to Edit RAW with External Editor?

    The settings for the external editor will only let you edit the images in Tiff or PSD, I want to edit the RAW image itself. The only way I know how to do that is expert the master, edit it and then import it back in. This is a hockey workflow and fru

  • ITunes no longer plays downloading movies!?!?

    Okay so on the last two movie files I've downloaded from the iTunes store, I've had to wait for them to completely download before they will play at all. It used to be that I could play the movie as far as it was already downloaded. Now, when I click

  • Removing MBA from bag at airport...

    When I carry my iPad on flights, I don't have to remove it from my carryon bag.  Anyone tried the same trick with the MBA?  PITA having to take it out of the bag.  More chance that it will disappear after going thru the security procedure, especially

  • Disk Utility can't create a new partition

    Hello, I'm trying to create a new partition to install Windows 7 on, but I am unable to do so. At first I tried to do this with Boot Camp Assistant, but it didn't work. Then I tried to create a FAT partition with Disk Utility, which didn't work eithe

  • Fully paid invoice without residual item

    Hi,   I'm new to FI area, so I have some basic questions. 1. How should I view an invoice? What is the transaction? 2. How to check whether the invoice is fully paid or not? 3. I have check whether an invoice is fully paid without any residual item.