Fresh Install of UCCE 9.0 - Issue
Get error following when starting the Configuration Manager on AW on a fresh install of UCCE 9.0 :
Unable to intiailze real time feed for instance ICM1. Unable to proceed until realtime can be established.
Okay lets start over....
If you dumped the clgr process from the logger, I'm sure you're going to run into a lot of errors. So in your case...
cdlog icm1 la
dumplog clgr /o
You can type in clgr.txt from the next command to open the dumplog. Can you post that log file? I'm sure it's littered with errors.
The next you should check is your Web setup. I had this exact issue back in September during an upgrade and my issue was due to the fact that I entered in the incorrect hostname for the Central Controller Connectivity. So lets step through this...
Log into Web Setup on the Rogger
Click on Instance Management and confirm that the Facility and Instance are correct, in addition to the Instance Number which in all likely hood is 0. This of course is assuming that you successfully went ran the domain manager tool.
Under Component Management, click on Routers
Deployment page: Fault Tolerance Mode: Duplexed
Router Connectivity page: Confirm that the hostname you are entering for the Private and Public interfaces do in fact exist as DNS records, or at the very least, exist as a entry in the local host file.
Enable PG page: Enter the number range for the PGs
Router Options page: Make sure Enable Database Routing box is checked
Under Component Management, Click on Loggers
Deployment page: Fault Tolerance Mode: Duplexed
Central Controller Connectivity: Be absolutely positive that you are entering in the hostnames for your Rogger that corresponds to your Private network. For instance, DallasRoggerAPrv. Again, these hostnames should have DNS records or at the very least be an entry within the local host file.
Additional Options page: Check the box for Enable Historical/Detail Data Replication
Log into your AW-HDS server and launch Web Setup
Click on Instance Management and confirm that the Facility and Instance are correct, in addition to the Instance Number which in all likely hood is 0. This of course is assuming that you successfully went ran the domain manager tool.
Under Component Managent, click Administration & Data Server
Deployment size page: I'm sure you'll want to select Small to Medium
Role page: Select what fits your business needs. I always seem to select the first option
Administration & Data Server Connectivity page: For Primary and Secondary Admin & Data Server, put in the same hostname for whatever local server you are on. For the Primary/Secondary Pair Name, this will come into affect when you setup your CUCM PGs and will be defined in PG Explorer.
Database and Options: Select what fits your business needs here.
Central Controller Connectivity page: This is the page where I made my mistake in September and entered in the wrong hostnames. So take it from me, be absolutely certain that you enter in the correct hostnames for Side A and Side B here. Also, enter in the domain name suffix for Central Controller Domain Name, this should have been defined in Domain Manager tool.
Cycle services and then try to Initialize the database on the AW-HDS again
Similar Messages
-
Server 2012 fresh install - Running at a crawl. Possible hardware issue?
Hello All,
I have recently purchased a used server and just fresh installed Server 2012 to evaluate it, and I am experiencing a issue with it running very slow. So far nothing has been setup or installed besides the OS, hard drives, and a external usb drive,
so it is pushing me to believe my issue is hardware related.
First let me describe the issue more. Basically everything is slow to load. Control panel takes 20 seconds... trying to load disk management and other snap in from administrative tools all take 15-20secs+ and first come up in
a greyed out window or the administrative tools window goes to "Not Responding" for a few seconds then loads it.
I do not think it is due to the fact the server is used with slightly dated hardware as it has Dual Quad-Core 2.66 Xeons & 16gb ECC Ram, so I was thinking their must be a bad piece of hardware in there? Maybe bad ram?
Anyway I plan to start hardware diagnostics, but I just wanted to see if anyone had any insight or suggestions for me. And to verify if this sounds like a hardware issue to you as well.
Thanks!Windows 2008 R2 that is on top of the list of supported operating systems. It is a good choice for some testing with M350 G5. Then you can test the in-place upgrade and application compatibility test will tell you, which component makes the problem.
If for example onboard NIC is not compatible, then you can use another NIC card that is compatible. When it is RAID controller (very often), then either use another RAID or single HDD (it is test only, not for production environment).
You can explore the virtualization path. Get know if appropriate hypervisor from VMvare is compatible with this hardware is also compatible with Windows Server 2012 R2. VMware forum may answer your question on virtualization. Working in virtual environment
will provide some experience too.
Majority of current desktop equipment allows you for testing Windows Server 2012 R2. There are some exceptions, namely "high end game machines" that make you to find remedy for drivers (example
MAXIMUS IV GENE-Z - here is a need to adapt inf file for NIC, because of there is low end NIC on motherboard.)
For low performance issues use native tools like Performace Monitor and diagnostics - Event logs and Device Manager. For detailed analysis consider Sysinternals tools.
HTH
Milos -
I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else. -
Network issues with Leopard fresh install
I have an iBook that I was running Leopard on with no issues yesterday. It is no longer my main computer, so I wanted to wipe everything and start from scratch with a fresh install of Leopard. The install went smoothly. I did an Erase & Install setup from a Leopard Upgrade disc (but already had Leopard on my system so upgrade verified OK). When I booted up for the first time, it appeared everything was working normally.
I went online, downloaded a couple pieces of software I frequently use, and then started to set things up. This is when I ran into issues. I could browse the web without a problem. I could set up email with POP access, but not IMAP. AIM with Adium connects just fine. Tweetie won't connect. Dropbox won't connect. It's like some ports are being blocked, but others aren't, and I can't figure out why.
I have tried/verified:
OSX firewall is off
Restarted router/cable several times
iBook is in router's DMZ- outside of router firewall
Repaired permissions
Reset PRAM
Anyone have any suggestions or other troubleshooting ideas?Here are the steps to selling*:
http://www.macmaps.com/selling.html
Mac Pros that shipped with Leopard should install from the Mac Pro labelled discs. Those that came with pre-Leopard, you should still include the Mac Pro discs, though if you desire to install Leopard on them, you should also include the Leopard discs that are retail. Leopard retail looks like * and do not say Upgrade, DropIn, or OEM.
- * Links to my pages may give me compensation. -
Fresh install Win 8.1 Pro into Pavilion X2 (10", 32GB tablet)
Have a Pavilion X2 (32GB version) with Win 8.1 Bing.
Need to get into domain, therefore wanted to fresh install Win 8.1 Pro, at the same time remove the recovery partition for more space.
F10 to bios to set bootup to USB drive, pops in a Win 8.1 Pro x64 installation disc, but X2 refuses to boot to disc.
Is it the x64 version disc problem or have i missed some setting to make the X2 boot to disc properly??HI @Nikola84 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are trying to install a clean version of Windows 8.1 ( 64 bit).
What edition of of Windows 8.1 (64 bit ) are you trying to install?
Please provide your exact model of Pavilion 10 x 2.
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
ITunes will not work on Fresh INstall of Vista x64 SP1
I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?Read this scary microsoft support article on windows updates?
-
Satellite L655 - Sound not working on fresh install of Windows 7 Pro x64
Howdy all,
I purchased an L655-S5111 from Newegg that was on sale, put an SSD into it, and then installed a legitimate copy of Windows 7 Professional 64-bit I received from my current employer (I'm an IT guy). I've updated to the latest BIOS revision (1.70), and I've got all Windows updates installed, all drivers installed, including the correct Conexant HD Audio and ATI HDMI Audio drivers. Unfortunately, sound does not work. Sound worked briefly when I first installed Windows 7, then I muted it until I could get it set up with headphones. When I unmuted it, it had ceased to work.
This laptop is less than 3 weeks old at this point, and I get no audio over headphones or speakers, although Windows clearly shows no issues with the drivers, they're the latest version, on a fresh install, and I can see the audio in the mixer playing. The microphone built-in to the laptop does pick up sound as well. I believe that this is most likely not an issue of physical interconnection, but more likely a software level issue, I'm just having trouble identifying where it is at.
I also have no related error messages anywhere in the event logs.
Message was edited by: ADMINI have two problems with installing the recovery image:
1) I didn't get a copy of the recovery media with the system
2) The recovery media would install Windows 7 Home Premium 64bit which is what came with the laptop.
Since I have legitimately licensed copies of Windows 7 Pro/Enterprise 64-bit, I would much rather install that. Since I used the drivers and software from the Toshiba website for this particular model, it should be working. There should be no functional difference between the recovery media and a fresh Windows install from the Microsoft-provided Windows media and Toshiba provided drivers from their website.
As you can see in the sysinfo (I'm assuming Keany the respondent is the admin that approved my post and edited it, thus had access to the data which was removed) I have all the Toshiba software and drivers installed, identically to if this was the recovery image, I just have it on a different edition of Windows 7.
I'm open to any other suggestions, but unfortunately it is not possible to do the above. -
Very slow Mac, compared to when running a fresh install
I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
30/05/13 4:24:40.836 PM blued[57]: Read version 2 info. Number of devices:2
30/05/13 4:24:40.836 PM blued[57]: Class of device: 0x2580
30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
30/05/13 4:24:40.837 PM blued[57]: Class of device: 0x2540
30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.742 PM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10 isBackBuffered: 1 numComp: 3 numDisp: 3
30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
30/05/13 4:24:48.974 PM digest-service[114]: label: default
30/05/13 4:24:48.975 PM digest-service[114]: dbname: od:/Local/Default
30/05/13 4:24:48.975 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:48.975 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
30/05/13 4:24:49.176 PM kdc[45]: label: default
30/05/13 4:24:49.176 PM kdc[45]: dbname: od:/Local/Default
30/05/13 4:24:49.177 PM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:49.177 PM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
30/05/13 4:24:49.227 PM kdc[45]: KDC started
30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
30/05/13 4:24:51.236 PM sudo[135]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[0]: 192.168.2.1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[1]: 192.168.2.1
30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: dns[0]: 192.168.3.1
30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
30/05/13 4:24:55.020 PM named[160]: corporation. Support and training for BIND 9 are
30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
30/05/13 4:24:56.169 PM named[160]: running
30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent absolute time: 48.352954504 civil time: Thu May 30 16:24:56 2013 pid: 168 uid: 501 root: no
30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists. -
Fresh Install of iTunes and some Questions
I just did a fresh install, set up home sharing, and did an iCloud match so my whole library is in the cloud. I have my library file stored locally but my music files on my NAS. Here are my questions:
1. I want to install iTunes on my wifes computer, set up iTunes match for her, set up shaing. She will have a "shell" setup where notjing is stored as she is sharing with me and accessing the cloud. Do I need to set up that computer under my user id even though she has her own? I figure thats the only way to get her to iTunes match that I have?
2. How do I do this all? Meaning, I will have a local library file for her but I need to point her laptop to the NAS with the files on them. If I change her iTunes media file to that location on the NAS and check keep organized, will it screw up the files I have there? I noticed when I did that on my PC it moved some fles around and I had to reassociate lost files to songs. Took hurs. Would iTunes have done that automatically for me somehow? Should I not check the keep organized for her as she will not be adding music anyhow? What is the harm either way?
3. How do I see my pictures on my ATV unit? I thought I used to be able to but don't see an "app" on the ATV to do so, just photo stream which I do not want to do. I thought I used to be able to access the pictures stored on my NAS? Am I dreaming this or did it go away? My NAS is an iTunes server and I swear I used to be able to access them from my ATV? All I see on my ATV under my library is music, podcasts and movies.
4. I have my NAS sharing (home sharing) and I can see it on my laptop with iTuenes installed. When I click on it I see only music, no movies or anything else, why is that and is it something to do with home sharing? But, like I said I can see thse movies on ATV under my library. I can also see my playlists on the shared on my laptop but nothing is in them. I think that may be becuase they were set up under another library and now that I hve a new library file, they don't carry over? I don't see any of said playlists in the sttandard iTunes interface under playlists, just under the shared however like I said, no files in them. Also, the share comes and goes as in sometimes I see it sometimes I don't however I am always able to access the NAS from iTunes. Strange, may be network issues?
5. Along those same lines, sometimes the home share just up and dissapears from ATV. Maybe a network issue?
6. Lastly, I just did my first backup/sync to my new laptop with the frsh install of iTunes on it. It gave me some sort of message that I can only sync to one computer and do I want to overwrite or whatever? I said no and it did nothing. After that, I did a back-up however it seemed to go fast and I also did a sunc. The sync was three steps, used to be like six and I did not notice any of my new apps being copied to it. Something is wrong here but not sure what to do, ideas?
Thanks in advance for any and all help.#4 - make sure you are sharing out all the items in your itunes library (music, movies, etc)
you should be able to do that under preferences
you may also want to check if it is pointing to the correct library
#1 - home sharing should work on the LAN w/out the need for signing in; the shared libraries should appear under "shared" in the left sidebar of itunes
think this may resolve the issues you have on #2 as well
#2 - itunes doesnt seem like it's built for that, but if you have any experience, i'd like to hear it. this seems why home sharing is the usually the best route to go and just have one instance of itunes managing the library
but as long as the NAS or any media drives are shared out, connecting to it should not be a problem. it's the writing to the itunes library that's the issue. i haven't used Match so can't help there.
depending on your OS, you can either ctrl-click or option-click on the itunes icon,
which will also give you the option of selecting a library location upon launching itunes
you can navigate to the location of the library file and point it to that.
technically, you could do that but i believe the actual library has to be stored locally
as long as you still have all the media, then you can just rebuild the library
but for locally shared items, as in, all inside the home, i would leave icloud out of the equation
just use itunes sharing and it should be fine -
So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometime, and haven't been able to figure out how to get my files back. Please Help!!! My daughter is 2 and a half, and every picture/video I have of her is locked on this thing. I was planning on making some photo/video projects fo my wife for Christmas, and now I'm definitely not going to be able to pull it off. Her birthday is at the end of January, though, so if I could have it by then, that would rule!
Basically, the bar on the right of the screen has some gray dates, which I can access (all backups after the Mavericks install), and purple dates that go all the way back to March (when I originally purchased and began using the TC) which deny me access/viewing. It's possible that I created a slightly different user name when I reset my MacBook, which I guess is most likely the cause, but I have no idea what to do now to correct it. Thanks for taking the time!Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want. -
Fresh Install of Mountain Lion how do I export users from Lion Server
I've been having some issues with Lion Server, mainly Kerberos related and Profile Manager. So I want to start fresh with Mountain Lion.
I've installed ML and Server, and profile manager is working now for the first time (yay!)
Now I want to Import all my existing Open Directory users from Lion, I don't want to Import the entire OD though because I think some of my kerberos issues will just get carried over to ML.
I would like to just export the Users to a file then use ML server to import users from file, but I can't see an option to export in Lion Server, I have tried doing it from WGM on Lion but the 'users' file is not recognised by ML serverGreat thanks for the reply, I'll try it tonight when everyone has logged off.
Yeah I was very pleased initially with kerberos on Lion, it worked great to start with, now I'm just getting expired tickets for a default realm when some users log in, yet other users continue to work fine.
I was planning to slowly install Mountain Lion Server and test is thouroghly but I've had a bit of a disaster that if forcing me to go live with ML server quicker than I wanted to!
Basically because on Lion Server I have all the Service Data on a separate drive, and I upgraded to ML server on a backup copy of Lion Server just to see what it was like, though now I've rebooted the original Lion drive but half of the services are now screwwed up because the ML Server must have changed them, so things like Wiki Server and Profile Manager are now broken from the Lion Server boot, they just show "Error Reading Settings"
I realise now I should have moved the Service data back to the local drive before doing a test upgrade so I wouldn't have messed it up! but now it seems like my best way forward is a fresh install of ML Server -
Fresh install keybinds stop responding [solved]
Hi there,
I've recently been having some issues with Arch. I did a fresh install because I'm running on a chromebook and need as much space as possible only have a 14GB SSD at present until I get round to upgrading it.
I previously installed Arch (i386) with no such issues, but I've recently switched to i3 WM and x86_64 using this: https://wiki.archlinux.org/index.php/Ch … tion_media. Last week I also installed a custom chrome patch
https://wiki.archlinux.org/index.php/Ch … .27_Script and everything was working fine with this. I did a fresh installion of Arch about an hour ago and I'm mentioning this because it allowed me to install Arch 64bit directly from the dual ISO without having to modify the ISO itself so I'm not sure if that's the issue considering the 32bit installation worked from the same ISO.
Now I have some strange issues. Keybinds work fine when I boot up but when I open urxvt it seems to stop all my binds working. Similarly the same issue happens when I run dmenu and open chrome. Sometimes I can open multiple instances of the aforementioned before it stops working. The mouse icon changes as if it's trying to load something, but nothing opens and absolutely no binds work.
I've tried other WM's and get the same issues with urxvt and dmenu.
I have searched google but can't seem to find any related issues so I'm at a loss as to where to begin.
Any help would be greatly appreciated.
Thank you.
Last edited by Gwynplaine (2014-11-20 16:24:37)It seems that the use of dmenu causes things to hang. I'll reboot and wait a few minutes and see if it automatically does it.
I have not modified any files since installation except enabling wicd and slim with systemctl and the modifications to .xinitrc.
Thanks for the information. I'll bear that in mind.
Edit:
So I rebooted and left the system for five minutes. After that I ran dmenu using alt+d (as defined in i3 config). Dmenu would not open and changed the mousekey to the loading icon and no other bindings would work again.
So I believe that the issue is definitely with dmenu.
Edit 2:
So a little bit more information on dmenu. I have installed it with every installation. My system is 64bit and I have enabled multilib. I installed it through pacman.
I'm going to disable multilib and re-install.
Edit 3:
Same issue. Actually seems worse now.
Edit 4:
I'm wondering if it could be due to this section of .i3/config?
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
Edit 5:
Okay so after some testing it seems to be i3. I've re-installed, using the i3-git package from AUR. I'm installing Yeganesh and I'll see now how this plays out.
Last edited by Gwynplaine (2014-11-20 01:57:48) -
Iphone 3GS 3.1.2 not seen by itunes on windows 7 32bit fresh install
I have no idea why on a fresh install my iphone wont sync with itunes. I'm not sure where to begin in trying to diag this...
Below is the output from itunes' diag run:
Microsoft Windows 7 Business Edition (Build 7600)
Dell Inc. Latitude D620
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D3103B4D2DEED95E
Current user is not an administrator.
The current local date and time is 2010-03-21 23:24:44.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA Quadro NVS 110M
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.I'm on a dell d620 laptop, about 5 or so years old or more. I was on XP and things worked fine until I some random windows update from the auto-updater installed and I had issues. Thinking this would not happen on Win7 and wanting to upgrade anyway I went to Win7 and I still have the same issue, except I dont: now Itunes doesn't stall it just doesn't see the iphone and try to synch. It would stall at synching. I read somewhere to delete podcasts which I did which I think worked itunes doesn't see the phone. Windows does and I can see and transfer photos and movies but no itunes syncing.
thanks guys for the help,
alex -
Macbook Pro stuck in restart loop with fresh install
Hello!
I have a Macbook Pro (Mid 2009) that I have been running Snow Leopard on up until now. I had been meaning to upgrade to Mavericks for a while, but had just never gotten around to it. Over the last month or so, my Macbook has been running really slow, hanging on the spinning beachball every few minutes for a few seconds (sometimes up to a minute or so). So I figured a clean start might be the best way to go, and while I'm at it, I might as well upgrade to Mavericks.
I backed up all my data, and then I created a Mountain Lion bootable usb (I had trouble making a Mavericks bootable usb from Snow Leopard, and since I had bought Mountain Lion for my desktop, I just decided to do a fresh install of that, and then upgrade to Mavericks). I had no problem booting to the usb, erased my hard drive and did a fresh install of Mountain Lion. However, after the install on the usb, my mac restarted and got stuck in a restart loop. It will chime, show the apple logo and spinning gears for a few seconds, then the gears stop spinning, and then the mac immediately restarts (this time displaying a message saying the mac has recovered from a shutdown in a number of languages), and the same thing happens again.
I was able to boot into the recovery partition, checked the permissions, found some that needed to be fixed, ran the repair permissions, verified the disk and was told the disk appears okay. Tried to then restart and same thing.
I have reset SMC, NVRAM, and none of these change anything. I booted in single user mode and ran fsck -fy, and recieved a message saying modifications were made, rebooted, same thing.
I have booted in verbose mode and the system restarts at the same point every time, right after displaying a message that says
SMC::smcReadKeyAction Error: (and then something with "BEMB", it goes by really fast so its hard to read exactly)
I have managed to boot into safe mode, but this has not made a difference. On one of my boots into safe mode, I went ahead and made a Mavericks bootable usb, and restarted the process: wiped the drive, installed mavericks, but I am in the exact same situation. I can still boot into safe mode.
I have seen some other issues that people have posted, but most involve the system freezing after the apple screen (not restarting) or do not involve freshly formatted HDs.
I'm just tying to find out if this is a hard drive issue, or if my mac itself needs to be retired. It has had a pretty long life (being 5 years old), and one of the RAM bays doesn't work (it is only running 4GB of ram, not sure if that can cause a problem with the boot cycle).
Sorry if thats a lot of information, I've been trouble shooting this for a few days. But thanks for any help you can offer!
A strange note:
-when booting from the mavericks usb, I got stuck in the restart loop a couple of times. I managed to get past this by clicking the mousepad a few times right after the gears finished spinning. The mouse became visible, the apple screen shifted color a bit (went from a bluish gray tint to an orangish gray tint), the mouse became visible, and I got to the reinstall menu as normal. As far as I can tell the clicking may have been coincidental, but it was the only time I was able to boot the usb, and I wasn't going to risk restarting to test that, and then not be able to boot again.Hey, thank you for your reply! I didn't have everything backed up, but I have a lot of my important stuff saved, though, so that's somewhat of a relief..
As far as my hard drive is concerned, would I have to send it in somewhere to get it fixed or would I just have to get a brand new one? If so, how much? Sorry if I seem a bit amateur, but this computer is my first personal computer, and I'm really lost without it!
Maybe you are looking for
-
Yet another "There was an error writing metadata to..." post
I know there have been several posts like this one on the forums, but I thought I'd start a new thread due to the fact that I tried a bunch of fixes that didn't work. Specifically, I get the above-mentioned error when trying to add keywords to DNG fi
-
Work Center takes only 6 activity types
Hi I have 6 types of labor activity type ( L1 to L6 ) , 1 machine and 1 set up. Total 8 activity types. Now if the planned labor is eg L1, the actual may be L6. But I cannot assign all 6 labor type in the
-
I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor
-
Error in Transmission after SHC approved
Hi all, I have a problem where my shopping cart is approved but throws an error while creating the backend follow on documents "Error in transmission" I have read the earlier thread which is similar to this but did not help me great. There were sugge
-
Didn't understand the program and output...
i have read this program from book but did not understand the program as well as output... class TwoDArray { public static void main(staing args[]) { int twoD[] []= new int[4] [5]; int i, j, k = 0; for(i=0; i<4; i++) for(j=0; j<5; j++) { twoD[i] [j]