Fresh Install of Yosemite and still spinning beachballs...
Hey all, I've been having this spinning beachball issue for a long time now and it's really annoying. I just did a fresh install of Yosemite. My Mac Mini downloaded Yosemite from the Apple servers. I just turned on my Mac Mini to test it out and the spinning beachballs are back...
There must be a way I can fix this without erasing the whole drive and installing each app one at a time...
Could someone please help me?
Thanks for any help!
Here it is:
EtreCheck version: 2.1.8 (121)
Report generated 22 February 2015 10:37:08 am AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Mid 2011) with Intel HD Graphics 3000.
Mac mini - model: Macmini5,1
1 2.3 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
DELL ST2220L spdisplays_1080p
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 13:9:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (78.37 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Logitech USB Keyboard
composite_device 15.52 GB
STORE N GO (disk1s1) /Volumes/STORE N GO : 15.52 GB (1.18 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Plantronics Plantronics .Audio 628 USB
SIGMACHIP Usb Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) [Click for support]
[loaded] com.netralia.driver.VBMicDriver (1.0.0 - SDK 10.7) [Click for support]
[loaded] com.netralia.driver.VBSpeakerDriver (1.0.0 - SDK 10.7) [Click for support]
[not loaded] com.sony.driver.prs2 (1.0.3d1) [Click for support]
/Users/[redacted]/Downloads/LCC Installer-1.app
[not loaded] com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) [Click for support]
Problem System Launch Agents: ℹ️
[failed] com.paragon-software.NTFS.SparkleUpdate.plist [Click for support]
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Click for support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.Logitech.Control Center.Daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.rosettastone.rosettastonedaemon.plist [Click for support]
[not loaded] com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
[not loaded] com.teamviewer.teamviewer.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.anchorfree.ajaxserver.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Little Snitch Configuration Application (/Applications/Little Snitch Configuration.app)
AirPlayitServerManager Application (/Applications/AirPlayit.app/Contents/Resources/AirPlayitServerManager.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
nplastpass: Version: 2.0.25 [Click for support]
Silverlight: Version: 4.1.10329.0 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 51 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Click for support]
Safari Extensions: ℹ️
LastPass
Audio Plug-ins: ℹ️
EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
CallRecorder: Version: v2.5.12 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Logitech Control Center [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 420.88 GB
Destinations:
TM [Local]
Total size: 999.54 GB
Total number of backups: 39
Oldest backup: 2014-04-18 11:07:44 +0000
Last backup: 2015-02-20 07:01:12 +0000
Size of backup disk: Too small
Backup size 999.54 GB < (Disk used 420.88 GB X 3)
Top Processes by CPU: ℹ️
19% WindowServer
8% soffice
2% Evernote
2% Little Snitch Agent
0% fontd
Top Processes by Memory: ℹ️
945 MB Finder
490 MB WindowServer
421 MB softwareupdated
215 MB soffice
163 MB Evernote
Virtual Memory Information: ℹ️
1.33 GB Free RAM
3.55 GB Active RAM
2.14 GB Inactive RAM
1.57 GB Wired RAM
4.37 GB Page-ins
168 KB Page-outs
Diagnostics Information: ℹ️
Feb 22, 2015, 10:10:31 AM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-22-101031_[redacted].cra sh
Feb 21, 2015, 11:25:30 PM /Library/Logs/DiagnosticReports/Skype_2015-02-21-232530_[redacted].hang
Feb 21, 2015, 09:23:16 PM Self test - passed
Feb 20, 2015, 06:03:25 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-02-20-180325_[redact ed].cpu_resource.diag [Click for details]
Feb 20, 2015, 05:48:59 PM /Library/Logs/DiagnosticReports/WindowServer_2015-02-20-174859_[redacted].cpu_r esource.diag [Click for details]
Feb 20, 2015, 04:57:38 PM /Library/Logs/DiagnosticReports/iAntivirus_2015-02-20-165738_[redacted].cpu_res ource.diag [Click for details]
Feb 20, 2015, 01:55:00 PM /Library/Logs/DiagnosticReports/coreservicesd_2015-02-20-135500_[redacted].cpu_ resource.diag [Click for details]
Feb 20, 2015, 01:36:26 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-133626_[redacted].cra sh
Feb 20, 2015, 01:10:44 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-131044_[redacted].cra sh
Feb 20, 2015, 01:10:14 PM /Library/Logs/DiagnosticReports/soffice_2015-02-20-131014_[redacted].hang
Feb 20, 2015, 01:08:12 PM /Library/Logs/DiagnosticReports/ufsd_NTFS.util_2015-02-20-130812_[redacted].cra sh
Feb 20, 2015, 12:54:21 PM /Library/Logs/DiagnosticReports/soffice_2015-02-20-125421_[redacted].hang
Feb 20, 2015, 12:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/TrueCrypt_2015-02-20-124911_[r edacted].crash
Feb 18, 2015, 04:04:28 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-18-160428_[redacted].panic [Click for details]
Similar Messages
-
I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.
<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
I have a fresh install of Lion and upgraded to Safari 6.0.5
I have a fresh install of Lion and upgraded to Safari 6.0.5 installed all patches and updates. Crashes immediately upon launch. Sig_Sev. Error.
Try a safe boot by holding down shift key during boot
Allan -
Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!
Some people have reported reinstalling the Apple 2014-001 Java update has helped.
See thread 7 here Illustrator CC 2014 crashes on startup after Yosemite 10.10 upgrade today. -
Why I installed my yosemite and not start me quickly?
Why I installed my yosemite and not start me quickly?
Hi Eloisa
You will have to try and give more information exactly what the problem is you are experiencing. -
Fresh install of Yosemite, nearly unusable, constant spinning wheel
Hello everyone,
MacBook Pro 13'', mid 2012
750GB HD
8GB Ram
2.9GHz dual-core Intel i7
A little background... once a year I usually back up my entire Macbook Pro, wipe it clean and install a fresh version of the most recent OS. I did this about a month ago and installed a fresh copy of Yosemite from Mountain Lion. For about 3 weeks it worked perfectly... running Adobe programs, and all my other normal applications (nothing big... Firefox, iMail, iTunes, etc).
NOW... about a week ago everything went to crap. The computer has become almost unusable without any change in habits of use. I get a CONSTANT spinning wheel whenever I click on anything its about a 30sec wait time and if I try to type something into Finder or Firefox its the death of the session... I have to restart the computer. Im at my whits end and about to use this computer as a expensive frisbee. This all started in Yosemite out of no where. There is NOTHING on my hard drive other than the operating system...
What I have already done:
Taken it into the Genius Bar. They ran some tests on the computer and physically took out the hard drive to test it on their systems. Everything checked out and received a PASS rating. They said it was nothing hardware related. They said it could have been a bad install of Yosemite since the hard drive was showing up as a "Logical Volume Group" instead of "Mac Extended Journaled". Suggested to go home and re-install Yosemite. So I did... 3 times... and nothing changed at all, same spinning wheel of death with nothing installed other than the OS.
In terminal
diskutil cs listdiskutil cs revert "UUID"
this changed nothing as well
Ran:
Verify Disk Permissions
Repair Disk Permissions - this fixed a handful of errors
Verify DiskThese 3 steps did not help much.
I am now back running Mountain Lion, it is more responsive but I still get a constant spinning wheel. Again, There is NOTHING on my hard drive other than the OS.
Here is my EtreCheck Report:
EtreCheck version: 2.1.8 (121)
Report generated March 15, 2015 6:31:00 PM PDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 495
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Time since boot: 0:9:16
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.30 GB (733.32 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
3rd Party Preference Panes: ℹ️
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% kextcache
4% Safari
2% WebProcess
2% hidd
1% WindowServer
Top Processes by Memory: ℹ️
304 MB WebProcess
163 MB Safari
89 MB kextcache
69 MB mds
52 MB SystemUIServer
Virtual Memory Information: ℹ️
5.46 GB Free RAM
1.57 GB Active RAM
264 MB Inactive RAM
1.29 GB Wired RAM
261 MB Page-ins
0 B Page-outs
Diagnostics Information:ℹ️
Mar 15, 2015, 06:18:11 PM Self test - passed
Please help before I throw this thing out the window....
Thanks in advance1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1291 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 400 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex|sudo:" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Fresh Install of iTunes and some Questions
I just did a fresh install, set up home sharing, and did an iCloud match so my whole library is in the cloud. I have my library file stored locally but my music files on my NAS. Here are my questions:
1. I want to install iTunes on my wifes computer, set up iTunes match for her, set up shaing. She will have a "shell" setup where notjing is stored as she is sharing with me and accessing the cloud. Do I need to set up that computer under my user id even though she has her own? I figure thats the only way to get her to iTunes match that I have?
2. How do I do this all? Meaning, I will have a local library file for her but I need to point her laptop to the NAS with the files on them. If I change her iTunes media file to that location on the NAS and check keep organized, will it screw up the files I have there? I noticed when I did that on my PC it moved some fles around and I had to reassociate lost files to songs. Took hurs. Would iTunes have done that automatically for me somehow? Should I not check the keep organized for her as she will not be adding music anyhow? What is the harm either way?
3. How do I see my pictures on my ATV unit? I thought I used to be able to but don't see an "app" on the ATV to do so, just photo stream which I do not want to do. I thought I used to be able to access the pictures stored on my NAS? Am I dreaming this or did it go away? My NAS is an iTunes server and I swear I used to be able to access them from my ATV? All I see on my ATV under my library is music, podcasts and movies.
4. I have my NAS sharing (home sharing) and I can see it on my laptop with iTuenes installed. When I click on it I see only music, no movies or anything else, why is that and is it something to do with home sharing? But, like I said I can see thse movies on ATV under my library. I can also see my playlists on the shared on my laptop but nothing is in them. I think that may be becuase they were set up under another library and now that I hve a new library file, they don't carry over? I don't see any of said playlists in the sttandard iTunes interface under playlists, just under the shared however like I said, no files in them. Also, the share comes and goes as in sometimes I see it sometimes I don't however I am always able to access the NAS from iTunes. Strange, may be network issues?
5. Along those same lines, sometimes the home share just up and dissapears from ATV. Maybe a network issue?
6. Lastly, I just did my first backup/sync to my new laptop with the frsh install of iTunes on it. It gave me some sort of message that I can only sync to one computer and do I want to overwrite or whatever? I said no and it did nothing. After that, I did a back-up however it seemed to go fast and I also did a sunc. The sync was three steps, used to be like six and I did not notice any of my new apps being copied to it. Something is wrong here but not sure what to do, ideas?
Thanks in advance for any and all help.#4 - make sure you are sharing out all the items in your itunes library (music, movies, etc)
you should be able to do that under preferences
you may also want to check if it is pointing to the correct library
#1 - home sharing should work on the LAN w/out the need for signing in; the shared libraries should appear under "shared" in the left sidebar of itunes
think this may resolve the issues you have on #2 as well
#2 - itunes doesnt seem like it's built for that, but if you have any experience, i'd like to hear it. this seems why home sharing is the usually the best route to go and just have one instance of itunes managing the library
but as long as the NAS or any media drives are shared out, connecting to it should not be a problem. it's the writing to the itunes library that's the issue. i haven't used Match so can't help there.
depending on your OS, you can either ctrl-click or option-click on the itunes icon,
which will also give you the option of selecting a library location upon launching itunes
you can navigate to the location of the library file and point it to that.
technically, you could do that but i believe the actual library has to be stored locally
as long as you still have all the media, then you can just rebuild the library
but for locally shared items, as in, all inside the home, i would leave icloud out of the equation
just use itunes sharing and it should be fine -
How to do a fresh install of Yosemite?
Hey,
I know a lot of people have been asking about formatting and fresh install, and there are several articles in the internet related to this matter. Despite all of those articles and instructions, I have not been able to accomplish what I'm trying.
I bought a late 2011 Macbook Pro from my previous employee, so the laptop's full of work related material. Since I don't need any of it anymore, I want everything (and I mean absolutely everything) erased, so that nothing can be recovered.
I have a bootable USB stick with Yosemite in it, but my problem is that I cannot seem to get everything formatted. I managed to format the Recovery HD (don't need it), but I am not able to release that memory (650 MB) for the main HDD (in other words, I can not merge them). So in Disk Utility I have the HDD listed, and below it a blank disk. There's also something called "disk2" with "Mac OS X Base System" below it, which I have not been able to erase despite all the articles that have been trying to explain how it's done. The third item's a grayed out "SuperDrive", which is totally unfamiliar to me. I have no idea what it is.
Any ideas how to get everything erased? Bare in mind that I'm not too tech savvy with Macs, so I need very specific instructionsThe "Superdrive" is the Optical Disc Drive (CD/DVD)
-
Mavericks still spinning beachballs after 6 months.
It's driving me mad. Spinning beachball for even the slightest action like clicking a folder to open it (takes 5-15 seconds), fan comes on all the time, Mail app takes 5 minutes to load and slows everything down, using an application like Lightroom is now a nightmare with delays even selecting photos to view. I want my nice Mac back.
i've run EtreCheck as recommended. Does this provide any clues? Tried restarting in safe mode.Thinking my next move is to reinstall Mavericks.
EtreCheck version: 1.9.11 (43) - report generated 9 June 2014 21:59:41 BST
Hardware Information:
MacBook Pro (15-inch, Late 2008)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:52:44
Disk Information:
ST1000LM024 HN-M101MBB disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 896.48 GB (224.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 102.86 GB (20.84 GB free)
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.Cycling74.driver.Soundflower (1.4.3) Support
[kext loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) Support
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d2) Support
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d2) Support
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d8) Support
[kext loaded] com.rogueamoeba.HermesAudio (4.1.0) Support
[not loaded] com.roxio.TDIXController (1.7) Support
Startup Items:
360ControlDaemon: Path: /Library/StartupItems/360ControlDaemon
ProTec6: Path: /Library/StartupItems/ProTec6
Qmaster: Path: /Library/StartupItems/Qmaster
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.noiseindustries.FxFactory.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.rogueamoeba.hermes.plist Support
[failed] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[failed] net.juniper.pulsetray.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.akamai.single-user-client.plist Support
[running] com.amazon.cloud-player.plist Support
[not loaded] com.freenet.startup.plist Support
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
USB Display Agent
Spotifree
TuneupMyMac
USB Display Agent
HPEventHandler
Internet Plug-ins:
JavaAppletPlugin: Version: Java 7 Update 51 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
DivXBrowserPlugin: Version: 2.0 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 Support
Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
AdBlock: Version: 2.6.34
My eBay Manager: Version: 3.1.0
AllMyTube: Version: 4.3.0.0
Flickr Original: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
AudioScrobbler: Version: 4.0.0 - SDK 10.7 Support
User Internet Plug-ins:
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Akamai NetSession Preferences Support
DivX Support
Flash Player Support
Growl Support
Java Support
MagicPrefs Support
MusicManager Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
2% mds
2% mdworker
0% applet
0% fontd
Top Processes by Memory:
414 MB firefox
147 MB com.apple.IconServicesAgent
86 MB com.apple.internetaccounts
86 MB Dock
61 MB CalendarAgent
Virtual Memory Information:
775 MB Free RAM
1.62 GB Active RAM
860 MB Inactive RAM
549 MB Wired RAM
281 MB Page-ins
0 B Page-outsI see two issues right away that are causing you problems. Clean My Mac and Genieo
However, I also see a lot of failed Kernel Extensions. I suspect you have a lot of older files that are still trying to run.
The forums are full of users with computers that no longer work correctly after running these so call 'cleaners' (Memory Clean, CleanMyMac, and MacKeeper). Do not install any third party so called Mac cleaning utilities. They can do harm to your Mac.
See this thread for removing Clean My Mac
https://discussions.apple.com/message/25680635#25680635
Genieo - how to remove:
http://www.thesafemac.com/art/
You have two choices.
1) try to fix by removing all the old files and repair damage done by clean my mac
Or
2) Do a clean install of Mavericks and bring over only your personal files.
If you want to prove to yourself that it would be worth while to do the clean install, we can setup a small 20 GB partition for Mavericks and you can test Mavericks out without all the baggage in your current install. -
I recently did a fresh install of the OS from online recovery. Mountain Lion was installed which I immediately upgraded to Yosemite 10.10.2. The trackpad started behaving erratically after two days. I seems that it started since I plugged one of my wifi router on the lan port. The trackpad is impossible to move as it seems to have a mind of its own. An external mouse connected works fine. Any help please !
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite -
Verify Clean Install of Yosemite and DiskUtil output
My iMac didn’t recover from the latest OS X Yosemite update after the reload.
After doing a “command R” I noticed DiskUtilty was only showing the SSD part of my hard drive and to cut a long story short after messing around all week (wiping hard drive in diskutility/booting Yosemite from USB stick etc) I seem to have my full 3TB hard drive back with a fresh version of Yosemite on it.
I’ve been at this position before though and when I try and restore my iMac settings from TimeCapsule, it hangs about an hour into it and the Fusion drive needs to be repaired again.
Before trying to restore my time capsule backup again I’d like to know the current setup (clean install of Yosemite) is how it should be.
What I’d like know is what output I should expect to see from “distil list” from the Terminal?
Should it look like the below?
Last login: Sat Mar 7 07:38:32 on console
tests-iMac:~ test$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 3.0 TB disk1s2
3: Apple_Boot Boot OS X 134.2 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *3.1 TB disk2
Logical Volume on disk1s2, disk0s2
697D1FEF-586B-4552-89D9-E45E64773DB2
Unencrypted Fusion Drive
tests-iMac:~ test$
Any other suggestions to check the disk/Yosemite install would be greatly appreciated.
Just trying to verify the current health of iMac before proceeding as I’m not experienced in OS X at allRecovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer) -
I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script> -
How to do a clean install of yosemite (have Mavericks 10.9.5 now) and then just install certain files, apps, documents, phopt's, etc...from time machine backup?
Do a backup before doing anything.
If you want to make a clean install of Mountain Lion, boot into the Recovery Volume (command - R) on a restart, use Disk Utility to Verify/Repair the disk and run Repair Permissions. Then erase the hard drive using Mac OS Extended (Journaled) format using the Options button. Reinstall Yosemite. Restart normally and test. Use Setup Assistant or Migration Assistant to import what you want.
Clean Install -
Safest way to go after a fresh install of iTunes and Windows
I had to wipe my PC, and my XML file got corrupted and the itl file lost. I went to sync just before I wiped it and got, the message about being able to sync to one library at a time.
As I'm starting from zero again will the iPod recognise the new library as "fresh" and I'll have to wipe the iPod of all the tracks on it?. Which isn't really a problem, as they're all backed up on my external HD.
Or can I put all my music back into iTunes with ratings, and hope the iPod accepts the fresh install?
Which is the best way to go? Empty iTunes and wipe the iPod and start from scratch? Or try and hope it recognises the new install?These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
MacMuse: Computer Crashed (free user steps – music recovery only)
Copying music from iPod to computer (a primer on various methods and software)
Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
iPodRip Software (Free trial: Mac & Windows)
PodUtil Software (Mac & Windows)
YamiPod Software (Free: Mac & Windows)
PodPlus Software (Windows)
TuneJack Software (Windows)
XPlay (Windows software For Music Recovery &/or Cross-Platform Functionality)
XPlay Photo Browser (For recovering Photos)
After recovering your Library, strongly consider developing a thorough and frequent backup strategy for just this type of situation (and many other potential disasters).
You need at least two full sets of your music, not including what is on the iPod:
a) One full set on the PC within iTunes (on internal HD or ExHD)
b) One full set on an separate external backup medium (CD/DVD/ExHD/other)
c) One (full or partial) set on the iPod
Music files on just the iPod and only one other medium is not considered having any backup.
If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
Here is a post on developing a thorough Backup Strategy
Best of Luck -
Just did a fresh install of winXP, updated the OS and installed the latest drivers I need.
I have an older machine that runs great but i am getting a plug-in crash error
Can I remove/delete Windows Presentation Foundation
Thanks
mike Daniels
[email protected]Hi mikeinkent
Your crash report indicate a problem with the Flash plugin (NPSWF32_11_5_502_146.dll).
Please update Flash to the latest version.
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
*http://www.adobe.com/support/flashplayer/downloads.html
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
Maybe you are looking for
-
Saving Adobe Interactive Form into a Server Path in Webdynpro.
Hi Forum, I have an Adobe Interactive Form as UI element in my webdynpro View. This form is available in the context attribute in Binary Format. I can read the form from this attribute as Byte Array only. I want to save this file in
-
Row-level Security Filters applied to Columns and Tables only? no Areas?
Good day all, Just quick question (obiee 10.3.3.2) - Is there a way to edit row-level security using Whole subject areas (instead of bringing in the individual Fact tables and applying filters by copying/pasting them). Follow up question - if I have
-
Hi all, i have just problem with generating XML through database. my code is DECLARE XML_DATA XMLTYPE; BEGIN FOR v_cur IN (SELECT * FROM EMPLOYEES) LOOP SELECT dbms_xmlgen.getxmltype('SELECT * FROM EMPLOYEES WHERE EMP_ID=' || v_cur.EMP_ID) INTO XML_D
-
Automatically refreshing LOV failes
Hi, I have a report based on Crystal Reports. This reports includes a dynamic parameter (LOV) based on one field in an SAP Query. This SAP query contains an user exit, so that each user can only see "his" data. Based on that user exit, the LOV of the
-
Help debugging my program, please
--------------------Configuration: <Default>-------------------- C:\Java\Java Docs\DeleteSpaces.java:18: ';' expected ^ 1 error Process completed. import java.io.*; public class DeleteSpaces public static void main (String[] args) File