Fresh install on scsi hw raid. hangs during load of sddm
Good night pals.
Mobo asrock extreme 3 8gb ram hyper x 4//4
hw raid: dell perc 3 sc (ami brand 945 series)
Kernel parameter tried.: noapic, noapic and nolapic, nolapic, iommu=soft, iommu=soft noapic nolapic
configuration on raid bios: i2o and mass storage
Gpu: nvidia geforce 650ti
issue: working on cli, no problem, on i2o, but running sddm kernel hangs, with "blocked for more than 120seconds. There's not hd problem, nor power supply issue.
I've installed sdparm (I mind this cause scsi) but the same occurs.
/var/log don't shows any about hw errors.
Last edited by ilkyest (2015-05-05 05:01:33)
How do I install, or compile, megaraid module on arch? Its seems be necessary to make this card work
Similar Messages
-
Install of Sol. Mgr hangs during INSTALL SOFTWARE UNITS phase of SAPINST
I'm installing Solution Mgr. 7.0 Ehp1 with Oracle on Windows 2003 Server. The JDK is 1.4.2_26-x64
When I get to the INSTALL SOFTWARE UNITS phase of SAPINST, it hangs. This is phase 37 of 46
I see several different warnings/errors in the various logs. Not sure which one is the real problem. Here is what I see in the various logs.
Thanks for any help you can give me.
sapinst.log
ERROR 2010-05-17 22:47:32.955
FJS-00003 uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)
ERROR 2010-05-17 22:47:34.126
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)).
java_server.log:
Info: Starting cluster instance processes.
Info: Starting the instance JC_solman_MES_00 running on host solman
Info: Starting the instance JC_solman_MES_00 processes. The instance is running on host solman
Info: Starting the process server0
std_server0.out
May 17, 2010 11:39:38... ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_11] Fatal: Can not instantiate UserContext with given properties.
service security ================= ERROR =================
Core service security failed. J2EE Engine cannot be started.
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:183)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
dev_jcontrol
[Thr 3208] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1996] JControlDPMessageProxy: Thread 1996 started as handler thread for R/3 dispatcher messages.
[Thr 3208] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_26-x64
[Thr 3208] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
dev_rd
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 448
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1534) [nixxi.cpp 4436]
***LOG S23=> GwIDisconnectClient, client disconnected (003) [gwxxrd.c 11603]
***LOG S74=> GwIDisconnectClient, client disconnected ( solman) [gwxxrd.c 11614]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11649]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11662]
LOCATION SAP-Gateway on host solman.sap.mertik.de / sapgw00
ERROR connection to partner 'solman.sap.mertik.de:1534' broken
TIME Mon May 17 23:39:38 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4436
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
dev_server0
[Thr 4332] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2285550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_26-x64
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:NewSize=320m -XX:MaxNewSize=320m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 1024M
-> init heap size : 1024M
-> stack size : 2M
-> root path : C:\usr\sap\MES\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4332] JLaunchISetDebugMode: set debug mode [no]
[Thr 4404] JLaunchIStartFunc: Thread 4404 started as Java VM thread.
[Thr 4404] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=512m
-> arg[ 12]: -XX:MaxPermSize=512m
-> arg[ 13]: -XX:NewSize=320m
-> arg[ 14]: -XX:MaxNewSize=320m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 20]: -Dsun.io.useCanonCaches=false
-> arg[ 21]: -Djava.awt.headless=true
-> arg[ 22]: -XX:+UseParNewGC
-> arg[ 23]: -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> arg[ 24]: -Dsys.global.dir=C:\usr\sap\MES\SYS\global
-> arg[ 25]: -Dapplication.home=C:\usr\sap\MES\DVEBMGS00\exe
-> arg[ 26]: -Djava.class.path=C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_26-x64\jre\bin\server;C:\j2sdk1.4.2_26-x64\jre\bin;C:\j2sdk1.4.2_26-x64\bin;C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs;C:\ORACLE\MES\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\usr\sap\MES\SYS\exe\uc\NTAMD64
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -Xss2M
-> arg[ 32]: -DLoadBalanceRestricted=no
-> arg[ 33]: -Djstartup.mode=JCONTROL
-> arg[ 34]: -Djstartup.ownProcessId=4328
-> arg[ 35]: -Djstartup.ownHardwareId=U1840606892
-> arg[ 36]: -Djstartup.whoami=server
-> arg[ 37]: -Djstartup.debuggable=no
-> arg[ 38]: -Xss2m
-> arg[ 39]: -DSAPINFO=MES_00_server
-> arg[ 40]: -DSAPSTART=1
-> arg[ 41]: -DCONNECT_PORT=64998
-> arg[ 42]: -DSAPSYSTEM=00
-> arg[ 43]: -DSAPSYSTEMNAME=MES
-> arg[ 44]: -DSAPMYNAME=solman_MES_00
-> arg[ 45]: -DSAPPROFILE=C:\usr\sap\MES\SYS\profile\MES_DVEBMGS00_solman
-> arg[ 46]: -DFRFC_FALLBACK=ON
-> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 48]: -DSAPSTARTUP=1
-> arg[ 49]: -DSAPSYSTEM=00
-> arg[ 50]: -DSAPSYSTEMNAME=MES
-> arg[ 51]: -DSAPMYNAME=solman_MES_00
-> arg[ 52]: -DSAPDBHOST=solman
-> arg[ 53]: -Dj2ee.dbhost=solman
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 4404] JHVM_LoadJavaVM: Java VM created OK.
[Thr 5488] Mon May 17 23:39:30 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 5488] Mon May 17 23:39:32 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 4440] Mon May 17 23:39:38 2010
[Thr 4440] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4440] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.Basis Guy,
I followed your instructions, and the problem still exist. Per note 908911, I added "SAP_BC_JSF_COMMUNICATION" role to the SAPJSF user in the backend ABAP system. I've tried starting and stopping
the System through SAP MMC, and I see the following (solman is our hostname):
solman 0 - The AS ABAP work processes start sucessfully, the AS Java processes, show three processes, with two in the stopped state:
1) SDM - state is stopped
2) Dispatcher - state is running
3) server0 - state is stopped, with a return code of -11113
solman 1 - shows 2 processes
1) Msg Server - running
2) Enqueue Server - running
From SAP MMC, I look at the Developer trace for the 2 stopped processes (SDM and server0). This brings up the dev_server0 log, and the dev_sdm log. In both files, I see the following error:
[Thr 3712] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
When I look for this file, it does not exist. Is this my problem, and where does this file come from during the install?
From the Syslog of SAP MMC, I see three errors when starting the system, in this order:
Process Type: DP Message ID: GZZ
SAP-Basis System: > 1 possible network problems detected - check tracefile and adjus
Process Type: RD Message ID: Q01
SAP-Basis System: Operating system call recv failed (error no. 10054)
Process Type: D0 Message ID: R49 User: SAPJSF Client: 001
SAP-Basis System: Communication error, CPIC return code 020, SAP return code 223
Also, I see the following error in the defaulTtrace.0.trc file:
#com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties".
java.io.FileNotFoundException:
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties (The requested operation cannot be performed on a file with a user-mapped section open)
However, I see that this file does exist, but what does it mean "a user-mapped section is open"?
As for the configtool, Global Server Configuration, when I look for all instances of J2EE_GUEST or SAPJSF, only two parameters show up:
ume.login.guest_user.uniqueids = J2EE_GUEST
ume.r3.connection.master.user = SAPJSF
Looking in the ABAP System (via SU01), I see that J2EE_GUEST shows password deactivated. Is this correct?
Please advise.
Rick
Sunny,
Not sure what you mean by update the latest logs from sapinst.log. I've displayed the sapinst.log in the original post. I may just be misunderstanding your request.
Let me know if there is more info that you need. -
Fresh install of solaris 10 x86 hangs after 'Configuring devices'
Hi All,
I just received a new SuperMicro server with an LSI MegaRAID SAS 9261-8i controller. While trying to install Solaris 10 it hangs after "Configuring devices". I checked the LSI page and Solaris 10 is supported according to them. Any ideas how to proceed?
Fairly new to Solaris on x86 hardware.
The system has a Xeon X5690 processor in an Intel Workstation Board S5520SC motherboard. The motherboard documents claim that not disabling usb 2.0 can hang an install. I have disabled the usb 2.0 in the bios but the system still hangs. Booting it with the -kd and -kv options don't give much information.
Any help is appreciated. I might be returning these machines if I can't get this worked out.
Cheers,
Steve
Edited by: 967729 on Oct 25, 2012 3:51 PMSee if you can add the verbose option "-v" to the kernel boot options. I think you can get to the GRUB menu off the Solaris 10 install disk. That should tell you what device is causing the hang, or at least the last device that worked.
Also, can you try Solaris 11 and see if it gets past that point? A few years ago I has a similar issue with Solaris 10 on a Dell server. Solaris 11/OpenSolaris worked fine, though. IIRC I could work around the issue if I disabled the 2nd CPU - Solaris 10 had a problem bringing up the 2nd CPU on that Dell's CPU/MB config. -
Fresh install of Ilustrator CS6 (64bit) can't load Drop Shadow.aip
Today I upgraded from Design Standard CS5.0 to CS6, and as I am running Windows 7 64bit I chose the 64-bit version of Illustrator.
Now every time I start Illustrator it reports "Error loading plugins. Drop Shadow.aip"; after clicking OK it starts normally, but obviously without the Drop Shadow plug-in.
Then, I open a new document, draw a rectangle and select Effect/Stylize/Glowing Edges; the first time in a session I do that, Illustrator produces a pop-up saying "The operation cannot complete because of an unknown error. [CANT]", but on OK shows the Glowing Edges work area without problems. After finishing the Glowing Edges effect, I can then select it in that session without getting the pop-up. As Drop Shadow is in the Stylize category of Illustrator CS5 I suppose the pop-up is a side effect of the failure to load Drop Shadow.aip.
My question is, how can I get the plug-in to load properly?
JeroenSystem: W7/64 Utimate, CS6
Hello there
we ran into the same problem with Illustrator CS6 (and Bridge CS6 crashing immediately after launch) and sadly none of the above tipps could solve the problem. Here's how I solved the problem ...
The problem seems to be related to W7-UAC and permissions (at least here). Like many other in the GFX-biz i use a fast stripe-set to carry the TEMP- and TMP-folders. The environment variables therefore pointet to "TEMP => s:\temp" and "TMP => s:\tmp".
This seems to confuse the good ppl at Adobe or Microsoft.
FIX:
a) Make sure your user-environment variables "TEMP" and "TMP" point to the default, as set up by Windows upon installation: this can be either
"c:\Users\{username}\AppData\Local\Temp" (which didn't exist here)
or
"c:\Windows\Temp"
(where "c:" indicates your system drive)
b) If your TEMP/TMP vars point to non-standard paths, and if you are unsure, make User and System-environment vars point to "TEMP => c:\windows\temp" and "TMP => c:\windows\tmp"
Question:
How to still use your fast stripe-set or SSD for temp-folder?
Just create "junctions" within the Windows-folder. Junctions are special links that point to different locations. To create junctions, do the following (but DO TAKE CARE, tipps are provided as is, whatever you do, you are responsible for it
a) open an Explorer-window as Administrator (right click and select "run as Administrator"), go to your Windows-directory and delete the "temp"-folder (and the "tmp"-folder too if there is one)
b) make sure the temp-folders on your fast drive/partition are created already
c) open a command-window as Administrator (right click and select "run as Administrator") and type the following commands (just enter bold stuff):
%SYSTEMDRIVE% (press enter)
this brings you to the drive where Windows is installed on
cd %WINDIR% (press enter)
this brings you to the Windows-directory
Once in the Windows directory, type ... "mklink /j temp [path to your temp folder]" so in case your fast stripe-set is drive "s" and the tempo-folder therin is called "temp" you type ...
mklink /j temp s:\temp
d) do the same for "tmp"
mklink /j tmp s:\tmp
Here's the setup that fixed it here ...
System and User-TEMP-variable points to "c:\windows\temp"
System and User-TMP-variable points to "c:\windows\tmp"
"c:\windows\temp" is a junction to "s:\temp"
"c:\windows\tmp" is a junction to "s:\tmp"
Additional bonus:
The above procedure also fixed the crashes in Bridge CS that occured as soon as the program launched.
Really sorry for the long post, but I hope it helps someone!
And yes, you are welcome, Adobe! -
Xorg - Synaptics not working on fresh install.
Ok... This one has me scratching my head major.
After a certain snafu with e4rat I was forced to reinstall my system which I took the chance to do some redesign on the laptop system layout.
Decided to go with a lightweight DE and the whole gammut.
I get lxde installed, 'startx' Everything is hunky dorey, and I mean everything. using the default synaptics conf that comes with xf86-input-synaptics. I get a whole bunch more software installed and reboot to try out the whol SLiM DM (which didn't work btw)
So SLiM descides it's not going to load up lxde for me. type in username, password, hit enter and the screen flashes and comes back to SLiM... kill SLiM and startx... pointer doesn't work. reboot, startx...pointer doesn't work.
from /var/log/Xorg.o.log...
[ 69.119] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 69.119] (**) HDA Intel Headphone: Applying InputClass "evdev touchpad catchall"
[ 69.119] (**) HDA Intel Headphone: Applying InputClass "touchpad catchall"
[ 69.119] (II) LoadModule: "synaptics"
[ 69.119] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 69.130] (II) Module synaptics: vendor="X.Org Foundation"
[ 69.131] compiled for 1.10.0, module version = 1.4.0
[ 69.131] Module class: X.Org XInput Driver
[ 69.131] ABI class: X.Org XInput driver, version 12.2
[ 69.131] (II) Using input driver 'synaptics' for 'HDA Intel Headphone'
[ 69.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 69.131] (**) HDA Intel Headphone: always reports core events
[ 69.131] (**) Option "Device" "/dev/input/event10"
[ 69.256] (--) HDA Intel Headphone: invalid x-axis range. defaulting to 1615 - 5685
[ 69.256] (--) HDA Intel Headphone: invalid y-axis range. defaulting to 1729 - 4171
[ 69.256] (--) HDA Intel Headphone: invalid pressure range. defaulting to 0 - 256
[ 69.256] (--) HDA Intel Headphone: invalid finger width range. defaulting to 0 - 16
[ 69.257] (**) Option "TapButton1" "1"
[ 69.257] (**) Option "TapButton2" "2"
[ 69.257] (**) Option "TapButton3" "3"
[ 69.363] (--) HDA Intel Headphone: no supported touchpad found
[ 69.363] (EE) HDA Intel Headphone Unable to query/initialize Synaptics hardware.
[ 69.416] (EE) PreInit returned 11 for "HDA Intel Headphone"
[ 69.416] (II) UnloadModule: "synaptics"
[ 69.416] (II) Unloading synaptics
Why is it ??associating?? my headphone jack with the synaptics?
Thinking I royally screwed something up and just for fun I sh*t-can the system and reinstall. The effects are reproduceable. 'startx' on a fresh install the synaptics pad works just fine, loads the synaptics driver against the synaptics device. But once I reboot...I have the config files that came down with the packages.
xorg.conf doesn't exist.
xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection -
Long waiting time during "Loading udev uevents" with P35-DS3R fixed
Hello folks,
I just bought a new computer with a new motherboard (GigaByte P35-DS3R), freshly installed Arch Linux and had problems during the boot process because "Loading udev uevents" took a very long time to finish (> 30 sec). In the BIOS both "USB Controller" and "USB 2.0 Controller" are enabled.
I spent a lot of time checking the autoloaded kernel modules and finally found out that the USB modul "uhci_hcd" caused the problems. I just added "uhci_hcd" to the module blacklist and now everything works as expected.
Cheers,
YogiHello again,
ok, my post above does not show the whole truth... blacklisting uhci_hcd caused my good old logitech usb mouse to stop working.
My solution now is to add uhci_hcd to both MOD_BLACKLIST and MODULES so that the module is not loaded by udev but only manually.
Is there a better way?
Cheers,
Yogi -
Video app hangs on loading iTunes Library through Home Sharing
Hello,
On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right?Hello,
On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right? -
Fresh installed arch hanged with Skype in wmii during video call.
Fresh installed arch hanged with Skype in wmi during video call. The keyboard stopped reacting to any keys, including Ctrl+Alt+F1 (F2, F3, F4, F5, F6), Ctrl+Alt+Backspace.
The timer was actually working but updating in 3-5 seconds. While I had powerful laptop (i5 2.6GHz, 8Gb RAM). So,... I had to use power button to restart.
Any ideas how to avoid this in future?
Dis anybody experience similar issue?try webcam scharing had 20 scharing on there and wibe them out
and myn works again -
How to install the driver of the 'SCSI and RAID Host Controller'
Hi,
I have two Windows XP(32Bit) installations:
•Windows XP SP2(32Bit) which is old and it seems as if it is infected by some viruses.
•I have installed another fresh clean Windows XP(32Bit) SP3. However, I have found that there is no category named with ''SCSI and RAID Host Controller'. However, when checking out the old version of Windows XP, I found 'SCSI and RAID Host Controller'
is there. (Screen shot below)
The new Windows XP(32Bit) SP3, there is no 'SCSI and RAID Host Controller'
My motherboard is:
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM.
]I am seeing that most computer doesn't has the scsi / raid controller . in the old Windows XP on my computer that SCSI and RAID controller exists, and it it has not a yellow mark on it.
When I installed a new windwos XP 32Bit SP3, no SCSI/RAID in divice manager .
My computer sound on new Windows XP doesn't work , however, on old Windows XP SP2 works well. I have a buitl-in sound card. SCSI and RAID controller category in the device manager on the old Windows xp SP2 is realted to sound card,I don't think.
Thus, What drivers would let the 'SCSI and RAID Host Controller' added in the device manager?
A man should convert his anger and sadness into strength to continue living in this life.If you open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on the pcb somewhere. You should also normally see this information on the first POST screen when you turn on the PC.
Otherwise Google "775i65G" like I did.
Here are the driver downloads (assuming it is an Asrock 775i65G R2.0 and not an R3.0)
http://www.asrock.com/mb/Intel/775i65G%20R2.0/?cat=Download&os=XP
You should install the inf driver first. Hopefully after you do that you will see your desired listing in Device Manager.
With regard to the AMR driver and the HDMR driver, you can find some information about these here :
http://en.wikipedia.org/wiki/Audio/modem_riser
Unless you actually have something plugged into these risers, it is probably not necessary to install the drivers.
However, the drivers for the integrated C-Media audio chip and the Realtek Lan chip may prove useful.
It looks like the motherboard has integrated video but if you are using a graphics card it will not normally be necessary to install the VGA driver.
You can download both the manual and the installation guide here
http://www.asrock.com/mb/Intel/775i65G/?cat=Manual
And if "SCSI and RAID Host Controller" is still not shown in Device Manager, don't worry - because these functions are not supported by your motherboard (again assuming it is an Asrock 775i65G)
Thanks a lot,
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed
well, and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and
RAID Host Controller in device manager.
First: Why did the CPUz, specy didn't detect motherboard name, and only detect the model. IF I need to open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on
the pcb somewhere, then what benfit would be there from hardware detection software?
Second: Yes, my motherboard has integrated video, and integrated audio card
However, this doesn't mean that I don't need to install them since the Vidoe controller is not properly installed (it is a default VGA ) Also, Multimedia audio controller is not functiong at all.
Finally: if And if "SCSI and RAID Host Controller" is still not shown in Device Manager in Windows XP SP3, because these functions are not supported by my motherboard, then why is 'SCSI and RAID Host
Controller' installed/shown in the device manger in Windows XP SP2 on the same PC???
A man should convert his anger and sadness into strength to continue living in this life. -
Windows 7 hangs during install on HP Pavilion a Media Center 1320n
Windows XP Media is currently on machine. I tried to install Windows 7 Ultimate Edition. When the computer rebooted the installation would hang during the complete installation. I tried several times and the same thing happened. I reformated the hard drive and tried to install the same OS using a USB flash drive and got the same results. I reformatted again and tried to install Windows Vista Ultimate Edition and got the same results. The only OS I can install on this machine is Windows XP. Can anyone tell me what needs to be done to install Windows 7.
I upgraded the Bios with version 3.24 before I began the installation.Another update in case anyone might be having the same problem.. Found out what the problem is.. But still have not resolved it.. I did another fresh install of Win7. Joined the domain and rebooted. When it came back up I checked the network and sharing center. It is showing "Identifying". Start> Run> firewall.cpl . It is showing Public network as my current connection. I unplugged my network cable and plugged it back in. It now shows domain network. Log offs work fine. After reboot it goes back to doing the same thing. I tried with both DHCP and a static IP. Both ways, same problem. So it works fine if the location is set to domain network but not to public (which i guess it automatically puts it in to if it cant identify the network). Sometimes it will go to work network. Logoffs take roughly 30 seconds compared to 8 min. on a public network or 2 seconds on a domain network.
We do have a group policy that disables security center. It will disable the firewall and other features when it is set to domain network. But not for the work or public locations.
The other policy we have in place is for Kerberos. Kerberos is disabled by default in windows 7 but is needed for our SAP to work. When we run a packet sniffer on the machine it is showing a lot of back and forth traffic with our DC and the protocol just shows Kerberos. So my next test is to remove the GPO for Kerberos and see if that makes a difference.
The funny thing is; I have a Precision 380 sitting right aside of it. Running Windows 7, joined to the same domain, connected to the same switch, in the same OU and it doesnt have a problem.. -
Hi,
At outset, note that my installation is pure Arch linux and it is fresh install which I did yesterday.
I have installed Arch linux yesterday with Openbox. I have not yet set it up completely. But something which is annoying me is boot hangs many times. I tried to debug it by adding parameters to kernel using grub-customizer. I added verbose and debug kernel parameter. The place where is hangs is
[25. 462902] Checking generic (e0000000 300000) vs hw (e0000000 10000000 )
[25. 481311] fb:switching to inteldrmfb from VESA VGA.
I used to use Antergos linux. I started getting this problem http://forum.antergos.com/viewtopic.php?f=36&t=1924 , so I switched to Archbang. I was still getting this problem http://bbs.archbang.org/viewtopic.php?id=5061 . Now I have switched to Arch Linux.
I thought it is problem with Broadcomm firmware or driver. But I think it is something different and related to intel video driver. I have installed Arch linux with Openbox. I am still getting this problem.
Last edited by cb9 (2014-08-11 17:16:30)cb9 wrote:Do I need to do ssh from another machine on the network to capture journal of my laptop which hangs? Or should I reboot this laptop which hangs and then capture journal? Because when it hangs during boot, I can not do anything except switch it off and switch on again. It hangs randomly. Not always. I also have Centos 6.4 and Windows 7 on same laptop which never hangs on CentOs or Windows 7. But only hangs on Arch linux randomly during boot. And http://pastebin.com/ does not work or may be down.
As a side note, see: Here. Notice the request to not use pastebin.com as it is full of ads and mangles the text. -
Fresh install of 10.5 hangs at boot after 10.5.8 update
I'm troubleshooting a MacBook that hangs at start-up after installation of the 10.5.8 complete update. I've run Disk Utility (no errors), fsck (fixed a single error), and repair permissions (oddly, repaired a few on this fresh install). I've booted into verbose mode, and it appears that there's an infinite loop of:
localhost DirectoryService[#]: Launced version 5.8.1 (v514.28)
localhost ReportCrash[#]: Saved crashreport to /Library/Logs/CrashReporter/DirectoryService. . . .(it goes on, but it's just date info).
Again, this is a fresh installation of 10.5. The only programs that have been updated are those updated through Apple Update. I did have problems installing the 10.5.8 update through the Update utility because "the package contents could not be verified," but the update installed fine after I downloaded it from Apple's site.
Any ideas?I'm troubleshooting a MacBook that hangs at start-up after installation of the 10.5.8 complete update. I've run Disk Utility (no errors), fsck (fixed a single error), and repair permissions (oddly, repaired a few on this fresh install). I've booted into verbose mode, and it appears that there's an infinite loop of:
localhost DirectoryService[#]: Launced version 5.8.1 (v514.28)
localhost ReportCrash[#]: Saved crashreport to /Library/Logs/CrashReporter/DirectoryService. . . .(it goes on, but it's just date info).
Again, this is a fresh installation of 10.5. The only programs that have been updated are those updated through Apple Update. I did have problems installing the 10.5.8 update through the Update utility because "the package contents could not be verified," but the update installed fine after I downloaded it from Apple's site.
Any ideas? -
Hi, My Mac Mini 2006 early core Duo
hangs when i try to connect wirlessly to
ZyXEL VMG B Series.
I am using fresh install Mac OS 10.6.3 with
2Gb of RAM.
The same issue when i try to hooked up with LAN cable.
Any tips and adviced will be very very welcome, thanks in advanced to everyone!Hey there cutyscar,
It sounds like you are unable to connect to your router either by Wi-Fi, or ethernet. I would recommend trying the troubleshooting outlined in this article named:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Start with this step, and work your way down as needed:
Check all cables and power supplies
Make sure all the cables related to the modem are plugged in and firmly inserted. This includes the modem's power cord, the cable from the modem to the computer, and the cable from the modem to the outlet. To be sure a connector is properly inserted, disconnect and reconnect it. Check to see if the cables have been cut, chewed, or otherwise damaged.
If you have any hubs or routers, check their cables and power supplies. If you have more than one power supply available for a type of hub or router, try swapping the power supplies. A defective power supply may affect network traffic.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue. -
IMac - will my raid set be recognized after a fresh install?
I own an iMac late 2012 and I installed an external raid with two Lacie thunderbolt disks. Will my raid be recognized after a fresh install of mavericks?
Software OS X 10.9.1 (13B42),
Grafica NVIDIA GeForce GTX 660M 512 MB
Memoria 8 GB 1600 MHz DDR3
Processore 2,9 GHz Intel Core i5Is this a RAID 0 (mirror) or RAID 1 (striped) setup?
While I am by no means a RAID expert, it seems to me that if you have a software RAID of two external HDs (i.e. set up via Disk Utility or other software), then a fresh (clean) install of OS X would no longer recognize the RAID.
Doing a clean install would wipe OS X's knowledge of the software RAID and you would have to set it up again. You can certainly set up the software RAID again, but I suspect that would re-initialize the RAID setup on the hard drives and probably wipe previous data. There IS a Rebuild option, but I have no idea if that would work in a case where you freshly install OS X.
On the other hand, I believe that upgrading OS X (rather than freshly installing the operating system) would preserve the software RAID setup.
Regardless of how you upgrade or reinstall OS X, back up your data first.
Maybe you are looking for
-
The image for my new podcast doesnt show up in iTunes
I started a new podcast called Silph Radio A Pokemon Podcast. Everything else worked fine, but the image is not showing up for the podcast. When I first attempted to submit my podcast, I was told my image had to be at least 600x600 pixels and it wa
-
Set value in af:query with value from method
hello all i have problem, when they want set value in af:query (inputText) with value from method, how to do that? anyone help..? thx agungdmt
-
How to determine which item is currently in focus
Is there a quick javascript way of determining which element on a page is currently in focus??
-
I tried to partition my Harddisk and now i can't find the partition and the space is lost.
The 100GB that I intended to create my partition on are lost and I can't find them anywhere. The option to merge two partitions doesn't even appear and I don't tend to restore my device. Greetings
-
Render file size bigger After Effects CC 2014
Hello, this seems like a silly question, but ever since the 'After Effects CC 2014' update my rendered files seem to be enormous in comparison to the files I rendered before the update! I don't see why the update would have adjusted my render prefere