Fresh install onto new Hard Drive
Hey people,
I have recently upgraded my iBook G3 300Mhz with a 60Gb hard drive and 512 Mb RAM. The Hard drive I put in was brand new - nothing on it whatsoever. I have been trying to install an OS on the hard drive and started with a Panther disc I had lying around. However, this was the CD that came with my G5 and after research I have found that these wont work in other machines. I had an old OS 9 disc lying around from my now deceased iMac G3 which (if I remember correctly) was the retail disk and not one that shipped with the iMac.
Every time I try to boot from CD with these disks it makes a bit of noise and a bit of a wait (couple of mins) and then it gives up and I get the flashing system folder. My question is: With the operating disks I have available should I be able to get one of them to install? or should I buy the retail version of OS 9 as something to at least start from? or is this something else altogether?
Thanks
--Tanya
P.S I have tried booting from CD with the C key pressed and with the Option systems select thing on startup - it just doesn't wanna boot em!
Hi, Tanya. Welcome to Apple Discussions.
What version of the OS were you running on the iBook before you replaced the hard drive?
If it has never run OS X, you will need to install OS 9 in order to run the firmware update for it. Do you have the original system CDs that came with the iBook? If so, you can choose the appropriate instructions for restoring the system software from the links in this Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=61802
Then apply the correct firmware update, which you can download here:
http://docs.info.apple.com/article.html?artnum=86117
Good luck.
Similar Messages
-
IBook G3 Will Not Boot - ?/face Icon on fresh install to new hard drive!!
Well, this is my first post here, but I hope someone out there may be able to help me....
I've got this iBook G3, and it will not boot. Originally, I got it and the hard drive was kind of suspect. I was able to install Tiger and use it, but it just stopped booting one day. I figured it was the hard drive, because it wouldn't boot to the OS even when stripped of the extra ram and after a fresh install via target disk mode from my Powermac. So, I changed the drive and reinstalled Tiger. It still won't boot.
Oh, and I've tried resetting the PRAM and resetting open firmware. Any ideas?^^^I'm installing from a family pack and this is the only computer I'm running Tiger on...all of my others are Leopard. Which, now that I think about it, is another reason that cloning the drive to the iBook wouldn't allow it to boot. However, I know the drive is good at least, because my Powermac can boot from it.
Anyway, I put in a 512 mb stick, and it then will get to the grey Apple screen, where it hangs forever. If I do verbose mode, the last line says "creating RAM disk for /var/run"
It sounds like a RAM problem still. I think I have some actual Apple RAM laying around somewhere (maybe a 128 mb), as the stuff that's in it now is not "Mac Ram," but it is what was working when the computer was working before. I'm still at a loss. I know the method I'm using (restored Tiger DVD to partition on iBook due to a bad optical drive), as I've done it before. In fact, it's even the same image from the last time I did it, as I never deleted the .dmg file. -
I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!
If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
I guess you'll have to erase and start over again now.
Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
Most commonly used backup methods -
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
Hi guys newbie here. My HP laptop crashed and i had to install a new hard drive, windows 7, outlook, itunes, etc. i need to get my contacts, calendars and photos off the phone and into Outlook and My Pictures. Syncing seems unidirectional PC -> iphone and i think wants to wipe out the iphone 4s with whats on the laptop - which is nothing. Need help to do this right...
-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....
-
Have Old Hard drive and want to move old data onto new hard drive in imac.
I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.
Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage -
How do i install a new hard drive using time machine
Hi there
I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
ThanksYou haven't inserted your new hard drive yet?.
There's two ways
1. install yourself
2. or pay someone to install it for you.
If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
Its very easy.
1. remove all screws and the lid.
2. remove screws from the black bracket which is holding your hard drive in place.
3. unplug your hard drive.
4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
5. insert these external screws to your new hard drive (there are four screws)
6. insert and plug your new hard drive.
7. screw the black bracket in firmly
8. attach lid and insert all screws firmly. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.
Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock -
What do I need to do after installing a new hard drive?
I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.
https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks. -
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-SteveBooting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.
https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name'' -
i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay
never mind i got it by going into my account and veiwing hidden items and there it was
-
After installing a new hard drive can I install snow leopard directly from snow leopard disc
After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz
You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)
Maybe you are looking for
-
My iphone will no longer sync with itunes
My iphone 4s has stopped syncing with iTunes. It was syncing initially after the ios7 upgrade but has since stopped working. I have uninstalled and re-installed iTunes but yo no avail. Any ideas?
-
Integration with iProcurement application
I'm trying to integrate Oracle iProcurement application's main business process, i.e browsing through shopping catalog, adding items to the shopping cart, saving and retrieving shopping cart, retrieving the pending requisitions etc, with my web appli
-
Hi all experts Here's a requirment like this: Routing for FP A has 3 operations, we have to confirm these operations individually,and if we donot confirm 0010,0020&0030 cannot be confirmed;This can be done by configing the control key with the field
-
Where does the INI file reside?
I've seen lots of forum posts on using the Properties class to read an INI file, but nothing on locating the INI file in the file system. Most of the examples use a hard-coded simplistic path (c:\temp\myapp.ini) or just the file name with no path. Fr
-
Change font programmatic in a table
Hey, is it possible to change font in a table at Runtime. In my application I have various lines of data representing in a table. Problem: How many lines to initialize with different font and font-size. Thanks for help geotos