Fresh install: wpa_supplicant starts unwanted (netcfg)

Hi there!
I just came back to Arch after some brief stints with it and am trying to get it all running lean and mean. Anyway, as stated in the topic I use netcfg to configure the connection to my wireless network.
My home network uses WEP (yea, yea, I know) and thus I have no need of WPA, the only profile that I copied from the examples dir is thus the WEP profile. It works very well. I noticed though that
on each boot wpa_supplicant was started. I wondered what's starting this and if I could enable/disable it somewhere? (It's not really a big problem but I'd like to know, after all the point is to know your system).
I checked rc.conf and there's nothing WPA related in there and of course in the network profiles nothing either. Where should I look? Should I post the contents of a specific file?
Thanks in advance!
Last edited by Aktau (2011-06-10 15:04:19)

No need for embarrassment.  My prior post wasn't an RTFM - I dislike those.  I simply wanted to give credit where it was due.
I don't think everyone should have to read the all the doc's every time - if there is a simple answer to a common problem I think the forums are an appropriate place to look for that answer.  Hopefully anyone who has the same problem we had can find the answer here and not have to spend half an hour reading the wiki and running tests.

Similar Messages

  • Fresh install - Format, start again!

    Hello,
    First post here so go easy,
    Had an iMac for almost a year and it's been great. It's my first apple product.
    However due to my lack of mac knowledge within the first few month it took me a while to get use to the file stucture, OS etc.
    So now I'd like to start again from the begining and I'm sure it'll be a lot more orgainsed !!  I'm not bothered about saving any software or documents but I'd like to restore my iphoto library. If I copy the library onto an external disk - format - then copy it back - would that work? Is there anything else I should bear in mind?
    Thanks in advance
    Dan

    Its A Homemade One, I Bought The Enclosure And Inserted An Old Drive, Its a 80Gb Western Digital.
    No It Does Not Work W/ The Drive Disconnected
    Im willing To Re-Install Everything so ill just back stuff up on the external And Re-Install

  • 2007 iMac freezes up, rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Would a fresh install or OS upgrade resolve?

    My circa 2007 iMac freezes up, and rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Most of the time I ONLY have 1 thing open at a time, and keep my tabs down to a minimum. I bought this to do film editing on but with it acting like this I cannot do that. I know I need a ram upgrade (currently running 2 gb) and my OS is old, 10.5.8, but I think even with it being a bit outdated it should run better than this. Would a fresh install or OS upgrade resolve this? Or any other suggestions to keep this clunker chugging along for a little while longer?

    How full is the hard drive?
    Do you run any virus software or hard drive "cleaner" software like MacKeeper?
    If your model is from 2007 you can install up to 6 GBs of RAM.
    2 GBs is the barest of minimum RAM for OS X to run on.
    Especially if doing video work. You simply do not have sufficient RAM.
    Also OS X 10.5.8 Leopard support ended around 2009.
    You could update to OS X 10.6 Snow Leopard, at least.
    It is available on disc from the Apple store for U.S. $19.99.
    I Would seriously upgrade your iMac's RAM to the max. 6 GBs before doing this.
    Reliable Mac RAM can be purchase from online Mac RAM source Crucial memory or OWC ( also known as macsales).

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its  related to overheating ?

    Just done a replacement of the pata DVD drive (its new and is working ok),  and a fresh clean  install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
    I believe its  related to overheating ?
    iStat Pro shows GPU diode temp at 66 C, CPU at 48 C,  Fan rpms is around 1000
    Any ideas somebody ?
    The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

  • I did a erase hd from start up utilities option, and now disk utilities doesnt come up at start up so i cant do a fresh install

    well where to start, after hours of thought i decided it would be a good idea to format/erase my harddrive so i could do a fresh install of os x, after reading up briefly i was lead to believe the best way to do this would be through disk utilities, i restarted my mac mini what was running maverick, and got myself into the disk utilities startup menu i then proceeded to format/erase my hd and rename it, from what i can tell it was all done correctly, osx format journal option ect.. i restarted the mac and then had the utilities options open i was looking for something to suggest to boot from usb\ external source as my copy of osx is on a drive. i worked it out that i had to do another restart and use command c to boot from the drive, but when i restarted the mac all that came up was internet recovery.. i have completely lost the option to use disk utilities somehow, i have tried to do the internet recovery twice and have managed to get to the end and the computer restarts the apple logo shows and then all of a sudden i get the grey flashing folder.. i really have run out of ideas of what has gone wrong spent hours trying to find out what could of happened to disk utilities option as it isnt even a option anymore upon start up and im going to be lost without my mac if i cant get it sorted soon as i use it for music production,
    thanks for any help in advance

    Well you should run the internet restore, as obviously it already has erased the drive.

  • I have a used iMac, HD wiped, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements won't start saying "could not complete because of missing or invalid personalization info." previous owner's name still there preventing initialing?

    I have a used iMac, HD wiped clean, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements was installed but won't start saying "could not complete because of missing or invalid personalization info." is previous owner's name somehow still there preventing initialing?  How do I remove and install my own?  I don't understand as HD was completely wiped with no OS when I got it.

    I think Adobe allows their software to be installed on 2 computers only. However, if say you buy another computer and wish to install PSE on the new computer ( effectively a 3rd computer as far as Adobe is concerned ) PSE needs to be properly uninstalled ie not simply by uninstalling using the operating system's uninstall process. It needs to be uninstalled using the Adobe uninstall process that is contained within the software.
    You should then be given a prompt as to whether you will be reinstalling on the same computer or if you wish to remove altogether. If the latter, then all traces are removed and the software can be (re) installed on the new computer.
    If, unknown to yourself, the software had been installed on 2 computers and although you or the previous may have wiped the hard drive clean, as far as Adobe is concerned the software is still ' registered / assigned ' to 2 computers.
    If the previous owner bought a new computer and installed their PSE on it, wiped the hard drive clean without properly uninstalling/removing PSE thentherein probably lies the prblem.
    As Allan Jones said, it 's probably worth your while to purchase your own copy.
    Hope this helps.

  • [Solved] X11 won't start after fresh install

    Hihi!
    I've been using Debian for quite some time now but I want to switch to Arch. My notebook is fairly modern and this doesn't mix well with Debian and as such my dGPU is basically unusable. My preferred method of installing Debian is to start headless so I felt quite at home with Arch and got through the install just fine, but I'm having problems launching Openbox among other hardware related issues. I spent yesterday googling and attempting fixes but came up with nothing, so I had to reinstall Debian as I was counting on having a usable computer at the end of the day. I did write down the messages I was getting though, hopefully they are enough to diagnose the issue. My hardware:
    AMD A10-5750M (8650G graphics)
    AMD Radeon 8970M 2GB
    The kernel was the one in the very latest install snapshot (3.12-9 or something)
    The first thing I noticed after booting into the fresh install was a warning along these lines
    [drm:r600_dma_ring_test] radeon: ring 3 test failed
    I ignored it, and preceeded to install the following packages
    xorg-server
    xorg-utils
    xorg-xinit
    mesa
    xf86-video-ati
    openbox
    openbox-themes
    other things related to the UI I wanted
    The ring 3 test warning still occured on reboot after installing X and the radeon drivers. Again I ignored it. My .xinitrc was simply exec openbox-session
    I ran startx and it failed, and got a bunch of errors that began right after a reference to "radeon" and the kernel. My xorg log did not get far at all. In fact the last lines were
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) config/udev: Adding drm device (/dev/dri/card1)
    And that was literally the end of the log. This is clearly a GPU/driver issue, probably with the 8970M as card1 seems to be the last line? Any help is appreciated
    edit: This is the same process I use to install Debian, and using this exact same kernel (plus the Debian patches) I can start X just fine. my dGPU is unusable with the FOSS drivers through as there is no glamor support in Debian. I get segfaults whenever I launch something with DRI_PRIME=1 after setting the 8970M as the offload provider
    Last edited by remyze (2014-02-09 04:02:04)

    Ok I installed fresh and had the same issues as last time. With KMS early start I still have the same problems launching X and I still have the ring 3 test error (it just appears earlier).
    There is nothing pure text in /var/log, I don't know if theres a way to use systemd with wgetpaste, so I took a picture that is hopefully not to difficult to read. I tried to sharpen it up a bit in GIMP.
    *see pastebin below*
    I also noticed that I get that ring 3 error even when I boot up the Arch installer  via USB. I wonder if I should try an older image with an older kernel?
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by remyze (2014-02-09 03:30:24)

  • Mail in Snow Leopard (starting from scratch, fresh install, POP gone?)

    Where is a good manual/FAQ/Help file that explains how to setup POP gmail accounts in the new Mail in 10.6??
    Did a fresh install on a new machine, and can't for the life of me figure out how to set it up (keeps selecting IMAP by default, no matter what I do, then when I setup a POP account it just sits there).
    How come it worked in 10.3, 10.4, and in 10.5 then in 10.6 it just acts all goofy and won't connect? Is this the definition of 'snappier'? I think so, because I'm about to.
    Thanks.

    Like you I did a fresh install and when setting up my gmail accounts found the only available option of setup to be IMAP. I found the fix to this ANNOYING ISSUE.
    Basically the auto-setup assistant that automatically starts in Mail w/ snow leopard looks to see if you enter "gmail.com" as your selected service and AUTOMATICALLY configures it to use IMAP instead of POP.
    Now I have tried going in and disabling IMAP and entering all the correct POP settings after the wizard completes setup but I could never get a functioning connection.
    The solution is to click the + sign to add an account but instead of butting "@gmail.com" change your address to "@yahoo.com". Type in the correct password and click continue. It will attempt to check the connection but will fail, click continue anyway.
    From here you will have to change the POP settings from the defaults for yahoo to those of gmail. Remember those are pop.gmail.com; username is your ENTIRE email address. Ensure everything is right and click continue.
    Again change the SMTP setting from those of yahoo to those of gmail's. Remember smtp.gmail.com!
    Click continue and finish the setup. Once the account is setup you will have to change your address from @yahoo.com to @gmail.com and you are finished. Your account should connect and work just like it always did.
    Kevin

  • Can't start X, libXaw.so.8 missing after a fresh install of Arch/xorg

    Hello,
    i just did a fresh Install of Arch and also installed the xorg Package plus the fitting driver for my GFX card.
    did the usual stuff, configured x11 and now when i try to run x, following error pops up:
    xterm: error while loading shared libraries: libXaw.so.8: cannot open shared object file: No such file or direcotry
    libXaw is installed, also 100% sure the right drivers for my card are installed (nvidia for a GF8400M)
    Any help on this?

    i had the same issue; after conky crashed X on me i was getting the above error whenever i tried to start xterm.  i reinstalled libxaw, xorg, xterm, all to no avail; finally, desperately i tried:
    sudo cp libXaw.so.7 libXaw.so.8
    and that fixed it; i know, terrible right? i haven't noticed any negative side effects yet (it's been two weeks or so); i can simply remove libXaw.so.8 to reverse what i did (and re-break xterm), but what's the actual way to fix this?

  • G5 won't start up, did fresh install...

    I've done a lot of searching but can't figure out what to do next. The problem originally started when my G5 only booted to the blank blue screen. Followed the directions off this website one by one, and finally fixed it (By booting up in Single User mode).
    However, after a few restarts the problem persisted and could not be solved with the fix it doc on this site anymore. Ran Disk Utility, Hadware Test, all fine. Did Archive and Install, but this time, once I shut down it got stuck on the ticking wheel on the grey screen.
    So I backed up and did a fresh install, erasing the drive and reinstalling OSX. Same problem! It boots up on the install, but won't restart. My clients are getting impatient, please help!
    Many Thanks,
    Chris

    Tried all of your suggestions to no avail, but still some great stuff to know.
    I had already removed everything except necessary RAM and on a hunch decided to swap out my video card for a friends with my same model. Booted no problem. It was the damned video card.
    Makes sense as anything that gets stuck on a boot up off a fresh install would indicate hardware issues, I just never thought a video card going bad could do that! Grrr... Oh well. Thanks for the help! ATI will be getting a call from me bright and early Monday morning, at least it's still under warranty.
    G5 Dual 2.5   Mac OS X (10.3.9)   6.5 GB RAM

  • How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9

    I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
    -How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
    -How do I ensure that I have the hardware configured on
    a macintosh to run properly.
    I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.

    Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
    When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
    To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
    Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
    to the VISA software.
    If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
    If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
    I hope this helps.
    Brian

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • ITunes will not work on Fresh INstall of Vista x64 SP1

    I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
    Any ideas on this?

    Read this scary microsoft support article on windows updates?

  • Very slow Mac, compared to when running a fresh install

    I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
    I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
    Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
    I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
    30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
    30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
    30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
    30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
    30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
    30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
    30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
    30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
    30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
    30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
    30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
    30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
    30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
    30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
    30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
    30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
    30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
    30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
    30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
    30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
    30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
    30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
    30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
    30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
    30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
    30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
    30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
    30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
    30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
    30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
    30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
    30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
    30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
    30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
    30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
    30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
    30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
    30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
    30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
    30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
    30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
    30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
    30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
    30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
    30/05/13 4:24:40.836 PM blued[57]: Read version 2 info.  Number of devices:2
    30/05/13 4:24:40.836 PM blued[57]: Class of device:     0x2580
    30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
    30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
    30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
    30/05/13 4:24:40.837 PM blued[57]: Class of device:     0x2540
    30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
    30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
    30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
    30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
    30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
    30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
    30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
    30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
    30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
    30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
    30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
    30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
    30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
    30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
    30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00700000000042801c0
    30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
    UUID 0xffffffffffffffffffffffff003f0040
    30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
    30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
    30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
    30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
    30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
    30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00700000000042801c0
    30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
    UUID 0xffffffffffffffffffffffff003f0040
    30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
    30/05/13 4:24:41.741 PM WindowServer[88]:   Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
    30/05/13 4:24:41.741 PM WindowServer[88]:   Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
    30/05/13 4:24:41.741 PM WindowServer[88]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
    30/05/13 4:24:41.741 PM WindowServer[88]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
    30/05/13 4:24:41.742 PM WindowServer[88]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
    30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
    30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
    30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
    30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
    30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
    30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
    30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
    30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10  isBackBuffered: 1 numComp: 3 numDisp: 3
    30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
    30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
    30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
    30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
    30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
    30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
    30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
    30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
    30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
    30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
    30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
    30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
    30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
    30/05/13 4:24:48.974 PM digest-service[114]: label: default
    30/05/13 4:24:48.975 PM digest-service[114]:           dbname: od:/Local/Default
    30/05/13 4:24:48.975 PM digest-service[114]:           mkey_file: /var/db/krb5kdc/m-key
    30/05/13 4:24:48.975 PM digest-service[114]:           acl_file: /var/db/krb5kdc/kadmind.acl
    30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
    30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
    30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
    30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
    30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
    30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
    30/05/13 4:24:49.176 PM kdc[45]: label: default
    30/05/13 4:24:49.176 PM kdc[45]:           dbname: od:/Local/Default
    30/05/13 4:24:49.177 PM kdc[45]:           mkey_file: /var/db/krb5kdc/m-key
    30/05/13 4:24:49.177 PM kdc[45]:           acl_file: /var/db/krb5kdc/kadmind.acl
    30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    30/05/13 4:24:49.227 PM kdc[45]: KDC started
    30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
    30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
    30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
    30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
    30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
    30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
    30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
    30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
    30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
    30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
    30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
    30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
    30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
    30/05/13 4:24:51.236 PM sudo[135]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
    30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
    30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
    30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
    30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
    30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
    30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
    30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
    30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
    30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
    30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
    30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
    30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
    30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
    30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
    30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
    30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
    30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
    30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
    30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
    30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
    30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
    30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
    30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
    30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
    30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS 
    30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
    30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
    30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS 
    30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
    30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
    30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
    30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
    30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
    30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
    30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
    30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]:   dns[0]: 192.168.2.1
    30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]:   dns[1]: 192.168.2.1
    30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
    30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
    30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
    30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
    30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]:   dns[0]: 192.168.3.1
    30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
    30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
    30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
    30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
    30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
    30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
    30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
    30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
    30/05/13 4:24:55.020 PM named[160]: corporation.  Support and training for BIND 9 are
    30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
    30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
    30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
    30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
    30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
    30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
    30/05/13 4:24:56.169 PM named[160]: running
    30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
    30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
    30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
    30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
    30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
    30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent  absolute time: 48.352954504   civil time: Thu May 30 16:24:56 2013   pid: 168 uid: 501  root: no
    30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
    30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
    30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
    30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
    30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
    30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
    30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
    30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
    30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
    30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
    30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
    30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
    30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
    30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
    30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
    30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
    30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
    30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
    30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
    30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
    30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
    30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
    30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
    30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
    30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
    30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
    30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
    30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
    30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
    30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
    30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
    30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
    30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
    30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
    30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
    30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
    30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
    30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
    30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
    30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
    30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
    30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
    30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
    30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
    30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
    30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
    30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
    30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
    30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
    30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
    30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
    30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
    30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

Maybe you are looking for

  • How do I stop my macbook telling me scratch discs are full

    I have reduced applications photos email etc from my laptop but I am being told 1. Start up discs are full and 2. Scratch discs are full what exactly does this mean. Would more memory help if so what type. The macbook is 2008 2.4 core 2 Duo, 2GB 667

  • How can I move pictures from my photo libary to my computer

    I added photos from my computer to my itouch. I want to take them off my itouch and back to my computer but the itouch cache that was o n my computer got deleted. how can I removed the pictures from my ipod?

  • Quality issues for public service commercial

    I work for a college at a University and I have a commercial script that we want to produce into a public service commercial. I am worried about quality. Currently I work with a Canon GL2 mini-DV Can anyone tell me how far away I am from commercial-l

  • Can the time out for loading a page be extended for busy sites?

    (Error:) Problem loading page The connection has timed out The server at xxx.xxx is taking too long to respond. * The site could be temporarily unavailable or too busy. Try again in a few moments. Question: Is there a way to extend the time out for s

  • Using new 3rd generations nano with OS 10.3.x

    Hi Got a new nano and want to use it with my emac. Messege is that new nano requires 10.4 or greater OS. Does anyone knows how the fix this without buying new OS for mu mac ?