Fresh OS X Tiger install won't go past the "Select a Country" screen

I did a fresh install of Tiger on a G4 Cube which previously had 10.2. The first attempt failed, so did the 2nd and 3rd after which the computer was stuck on the gray Apple start-up screen. So, I restarted, went into open firmware (Cmd-Opt-O-F) and ejected the disk. Cleaned the disk throughly, reinserted, and rebooted from the install disc (C key).
This time the installation went well. At the end it asked to Restart, which I did. It took a long time to boot, stayed on the blue screen for a while, went through the intro animation and to the Welcome screen where it asks to select a country.
On this screen, when I select United States and click Continue, it waits a few seconds, goes to a blue screen then replays the Intro animation and comes back to the Welcome screen. It keeps repeating this loop and I can't get past it.
Any idea what's going on and how to fix it?

I checked the console and here's what the system log had:
Oct 30 14:38:57 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:38:59 Cube crashdump[211]: crashdump crashed
Oct 30 14:39:01 Cube crashdump[211]: crash report written to: /Library/Logs/CrashReporter/crashdump.crash.log
Oct 30 14:39:17 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:48:14 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:48:32 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:48:34 Cube crashdump[254]: Safari crashed
Oct 30 14:48:35 Cube crashdump[254]: crash report written to: /Users/raj/Library/Logs/CrashReporter/Safari.crash.log
Oct 30 14:49:23 Cube kernel[0]: AirPort: New Group Key, Idx 1
Oct 30 14:50:54 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:50:55 Cube crashdump[259]: YouView crashed
Oct 30 14:50:56 Cube crashdump[259]: crash report written to: /Users/raj/Library/Logs/CrashReporter/YouView.crash.log
Oct 30 14:52:06 Cube kernel[0]: disk0s10: I/O error.
Oct 30 14:59:43 Cube crashdump[268]: Software Update crashed
Oct 30 14:59:49 Cube crashdump[268]: crash report written to: /Users/raj/Library/Logs/CrashReporter/Software Update.crash.log
Does this give any clues? I am able to launch apps such as Textedit, iCal, iTunes, Calculator, Disk Utilities etc. But it crashes when launching Safari, Software Update and some Installers like OnyX.

Similar Messages

My powerbook won't load past the grey apple logo screen

I had been away on business for a few weeks and yesterday I decided to run the latest updates for my powerbook. In the middle of it the computer froze for what I think is the first time since I bought it 2 years ago. I ended up having to shut the computer down with the power button. When I turned it on it wouldn't and still won't advance past the grey apple logo screen with the progress indicator. It just sits there for hours on end if I let it.
So far I've tried the following, all to no avail.
Booting in safe mode I get the same result.
Zapping the Ram
Resetting the PMU
Reinstalling OS X, during which the computer either randomly shuts down or goes to sleep and then shuts down and requires me to reset the PMU in order to start again.
Running the hardware diagnosis. I did this once and it froze during the logic board test, 1 minute 6 seconds in to it.
Anyone have any ideas that don't involve spending 900 dollars on a logic board? Thanks a lot for any help.

joeuu, thanks for the reply. i checked the airport and the ram and both seem to be seated properly.
i ran the quick hardware diagnosis and it came back showing everything was fine.
when i ran the extended one i got more progress than i did the first time. it got to the RAM diagnosis (about 6:45 seconds in) and then froze - i let it sit like this for an hour and a half to make sure it was actually frozen.
i also tried to run the disc utility from the installation disc and it just sits there with the progress wheel spinning, but nothing else is going on.

Macbook won't get past the grey start up screen

I purchased my Macbook in 2008, roughly July.
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues.
After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.
I'm frustrated, as I can't afford to replace my mac at this point.
Any idea what I can do?
Thanks..

Hopefully, nothing permanent. Do the following:
If you have Snow Leopard installed:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you have Lion installed:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
If you have Leopard installed:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

IBook won't get past the start up loading screen.

Ok, well, my iBook G4 stays in the loading start up screen where a folder is in the middle and changes from a question mark to the Finder logo. It stays there for hours. And if it eventually get to the Apple logo with the wheel dial on the bottom it takes another while to load. It once got fully loaded and started up to my desktop. But, since it would not respond and froze, I pressed the power button. I think I know the source of the problem, I downloaded uTorrent. I was very aware that downloading it was like begging for me to get a virus. So, then it froze up. Then, after many hours of waiting for my iBook to start up, I put the uTorrent file in the trash and emptied the trash can. Did I successfully delete the file from the computer? And if anyone can help, it would be very appreciated.

Any idea how old this iBook is?
Try starting the computer in Safe mode by holding the Shift key while booting.
Do you have the install discs for the machine?
~Lyssa

10.5.8 won't shut down after bad SD disk removal. It stops all applications but won't get past the final shut down screen.

I had a disk error with a SD disk from my camera. Removed the disk from the card reader and got the Disk Removal Error alert. Then the whole thing froze up on me. Noting else would eject, No other apps would shut down and basically nothing worked. I couldn't shut down so I removed the battery. Restarted the computer ok then tried to repair the SD disk in question. No luck on the repair so ejected it again. Then tried to restart OS and it won't shut down again except everything still works but it just won't shut down.

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

MacBook Pro won't get past the flashing grey file screen?

Ok, so tonight I try turning my MacBook on as normal, it then froze and I saw the rotating umbrella appear. So I restarted it. When trying to turn back on, the system did not load, instead a flashing grey file shape came up with a question mark inside. I have tried restarting with a number of key combinations, Option; option, ALT, P, R. Everything, yet it's not getting past this screen. Whenever I try to do an Internet recovery, it just stays on the wifi selection screen and I select mine, enter the password and then it just goes back onto the selection screen. Nothing is work yet! Incredibly annoyed as it has so much stuff, photos, music everything. I don't even know how I reinstall software as it's stuck... Can someone please help? My software is 10.7 I believe.

Hi PHXSuns,
If you are seeing a flashing question mark on startup, you may find the following article helpful:
Apple Support: A flashing question mark appears when you start your Mac
https://support.apple.com/kb/TS1440
Regards,
- Brenden

Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed. I take the card out and the machine works just fine. The screen says press "esc" for startup menu but nothing happens.
This question was solved.
View Solution.

Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot. Do you have another pci slot to try or just the one?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Reset PMU and Powerbook won't boot past the blue screen with "Mac OSX" box

Hi-
Problem: I tried to reset my PMU, and now when my computer restarts it won't go past the blue screen with the "Mac OSX" logo in the box (and progress bar, that never fills up). I then also tried to reset PRAM, but it still won't boot properly.
Backstory--
I've had my 12-inch Powerbook G4 for about 3.5 years already, so things are starting to get a bit out of whack. I replaced my battery about 3 months ago, which has been great, but recently my power-cord has been wonky (having to unplug it and replug it in to make sure it actually charges the computer, the light flickers on and off, etc). Today it actually started producing SPARKS at the place where the thin white wire meets the white plastic power brick, so I decided it was time to get a new one. Brought it home, plugged it in, and since it seemed like the battery indication icon on the menu bar was all out of sync with the powercord colored-light, I tried restarting it a few times, but still the same. Then, I decided to reset the PMU, which may have been a huge mistake. And now it won't boot past the blue screen... Any advice? I'm going to try restarting it in "safe" mode, but I'd be so grateful for any recommendations. Hope I haven't done something irreversibly stupid with the PMU reset.
Thanks,
Samantha

Hello all,
Thanks for all of your great suggestions and info-- here are a few responses.
1) The disk I just borrowed from my friend appears to be the full retail version-- it looks just like the links that Ali B sent, and is in a large box saying "Mac OSX Tiger, version 10.4"... will this be the proper disk to do an Erase and Install? The only other disks I have came with my Powerbook when it was originally purchased, when it came Panther (I think, 10.3?). Would I use both sets of these disks to do erase and install? Or only the Tiger OSX disks?
2) I get the sense that Disk Warrior or Tech Tool might be necessary, but does it make sense to TRY to do erase-install before buying them? Also, are there any downloadable (for pay) versions of this, or would I need to track down the actual physical disks in Hong Kong or wait for them to be shipped?
3) I haven't yet tried the S.M.A.R.T. test, should I do that first? What is the procedure? Are there any results or ways to know if the drive is too far gone (so that I might instead replace the internal hard-drive) instead of pay 100 USD first to do the disk repair?
4) Cornelius said: "An alternative would be to completely reformat and erase the entire HDD, then re-install and restore your data from backup. If your backup is in the form of a bootable clone of the entire HDD, you can just clone it back." I use Super-Duper to back-up and the most recent one copied the whole thing-- what would be the later procedure of "cloning it back"?
5) As I'm able to use my computer pretty normally right now, but does it still mean that it might crash/die at any moment? Is there any way to tell?
Thanks so much!

Macbook pro won't go past the apple logo (Lion)

I've installed Java Runtime, and after that tried to use "software update" but the application quit.
Tried to restart, but it stays stuck on the apple logo (with the wheel turning) for ages. Restarted in recovery mode, ran disk utility, repaired permissions and verified disk. no problems found. Restarted again, still the same thing - won't go past the apple logo.
If reinstall is the only way to go, is there a way to access this hard drive to back up files (it is a recent computer, still hadn't made any backups...)
Thank you all, help would be much appreciated!

Shut down and startup holding command-r keys into Recovery Disk from there choose Disk Utility and Repair Disk.
polymolly wrote:
I've installed Java Runtime, and after that tried to use "software update" but the application quit.
Tried to restart, but it stays stuck on the apple logo (with the wheel turning) for ages. Restarted in recovery mode, ran disk utility, repaired permissions and verified disk. no problems found. Restarted again, still the same thing - won't go past the apple logo.
If reinstall is the only way to go, is there a way to access this hard drive to back up files (it is a recent computer, still hadn't made any backups...)
Thank you all, help would be much appreciated!
Ooops you've been there, done that. You can use Target Disk Mode if you have another Mac.
EDIT: Was the Java Runtime from Software Update?

Photos update won't open past the "preparing library" page

iPhoto just updated to Photo 2015. I can't get to my pictures because the app won't open past the "preparing library" page.
The iPhoto update, under Apps, won't let me resume the update - I get an error "this item is temporarily unavailable".
Any ideas?

Hi wolfey_j
Welcome to apple discussions.
Drag and drop the plist for iDvd to the trash followed by a full restart of your mac and then repair permissions from apple's disc utility (application > utilities > disc utility)
The plist for iDvd looks like this:
com.apple.iDvd.plist
If that fails to resolve this issue then delete iDvd using this free download from apple's web site:
http://www.apple.com/downloads/macosx/systemdiskutilities/appdelete.html
You'll need to re-install iDvd again (custom install from the software that shipped with your mac or any retail copy of iLife'09). And lastly run apple's software updater from system preferences so all is up to date again. (not a bad idea to repair permissions one more time after updating all apps.)
Hope this resolves the issue/s but if not just come on back.
Good luck.

TS1367 I have a A1046 Powerbook G4. It won't start past the spinning wheel. I don't have the disks. Any suggestions?

I have a Powerbook G4, A1046 model. It won't boot past the spinning wheel. I have tried booting in open firmware, after I type mac-boot, it goes back to the spinning wheel. I need help

Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Computer won't get past the blue screen...

During class today I decide to install new updates to my computer, but class ended before everything had downloaded so I just closed the screen thinking nothing of it. Now my computer won't get past the blue screen and it just keeps reloading and reloading. Help?

You must have damaged your OS installation by putting the machine to sleep at the wrong moment. To fix that, you need to reinstall, but first you need to back up your data, if you haven't already done so. Have you?

IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

Urgent help!
Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
http://support.apple.com/kb/HT1547

IBook G4 suddenly won't boot past the "booting OSX" screen.

My iBook G4 suddenly died and now won't boot past the "Starting OSX" screen. The blue bar goes all the way across but never moves to the next screen. I have my original disks, containing OS 10.4.5. I am trying to boot from the disk, but just keep getting the Installer program. When I try to choose a startup disk, it still won't start. Any help or ideas? This is urgent.
BTW, I am a photographer and was workig in PhotoShop7 -- a program I use all day, every day.

Start from the install disc again and choose Disk Utility from the menu. Highlight the drive on the left and click Repair Disk. If it reports errors and repairs made, repeat the process until no errors are reported.
John

Macbook froze, now it won't get past the boot logo!

I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
PLEASE HELP!!

tibookg4 wrote:
I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
PLEASE HELP!!
Hi I have been looking at this drive for myself and heard that some people are having issues.
I would suggest you try to boot again holding down the OPTION key this will show you all the drives connected and determine if you can see you WD. If so click and see. If not I suggest you put your OS X Install DVD in.
DO NOT INSTALL
Goto utilities and Disk Utility.
Can is see the drive there?
If so select the drive and then goto REPAIR DISK can also repair permission but this sounds like something else.
Resetting the PRAM may help, but I do not suspect this is part of that problem.
Good Luck!
-h

Fresh OS X Tiger install won't go past the "Select a Country" screen

Similar Messages

Maybe you are looking for