Fresher Control Engineer / LabVIEW Developer

Dear Sir,
I am searching for job in LabVIEW based field. I have completed M.Tech Control Systems in 2012. I have CLAD Certification. Let me know if there any job Opportunities for a fresher kindly consider my resume or just reply me here.
Thank you.
Attachments:
Resume DNPrabu.doc ‏60 KB

It would appear at their headquarters in Charlotte, North Carolina, USA
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

Test System Engineer / LabVIEW Developer

As a member of the Nexjen Systems team, the Test System Engineer / LabVIEW Developer performs engineering design, software development and hardware specification for custom test & measurement systems.
Nexjen Systems offers a challenging environment where you can:
Develop your Engineering, Design and Software Development skills.
Refine your communication skills through direct client interaction.
Take responsibility for highly technical projects, with mentoring from experienced engineers.
Add significant value to clients’ product development and engineering efforts.
Nexjen Systems is a premier integrator of LabVIEW-based, automated test & measurement systems. We pride ourselves on providing a very high level of technical value to our clients through a range of services focused on test system engineering, construction and deployment. Nexjen Systems is located in Charlotte, our clients are located around the world. Learn more at www.nexjen.com .
Position Requirements
Engineering Degree (Electrical, Computer or Mechanical preferably).
3-5 Years LabVIEW and/or TestStand Development Experience.
3-5 Years Automated Test Equipment Design or Test Engineering Experience.
Desire to grow as an Engineer/Developer in a challenging technical environment.
PLEASE EMAIL RESUME' TO [email protected]

It would appear at their headquarters in Charlotte, North Carolina, USA
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Need Sr. LabVIEW Development/Controls Engineer in Kyle (Austin), Tx

Xtreme Power Solutions is
currently looking for Sr. LabVIEW Development/Controls Engineer to support the
Battery Energy Storage System Division.
This position will be based in Kyle, TX.
Xtreme Power Solutions delivers
integrated smart power management solutions from 500kW to 100MW. Proprietary
solid-state power management and integrated storage enables efficient and
available power for an environmentally sound 21st century electricity industry.
www.xtremepower.com
Primary Function:
The Sr. LabVIEW Development/Controls Engineer will lead a
small team of LabVIEW developers that is responsible for developing and
maintaining the company’s energy storage SCADA systems. There is Core software that is common to all
customers and customer specific software requirements as well. He designs control systems for XP
products. The position is initially for
a Team Lead, but may develop into a manager role.
Primary Duties:
Lead of
team of four to six LabVIEW or software developers
Work with software
team and project engineers to establish standards and procedures
Writes
LabVIEW Code
Unit Tests
and debugs code
Designs,
validates and maintains control systems.
Mentors
others
Ability to
travel up to 20% in support of
remote sites and/or customer installations
Qualifications
Bachelor of Science in Electrical Engineering or
Computer Science.
National Instruments Certified LabVIEW Architect
(CLA) or equivalent experience
10+ years of experience developing automated
test, measurement, data acquisition, and control systems.
5+ years
of designing, developing, implementing, and debugging LabVIEW and LabVIEW RT
software.
Technical requirements - Hardware
Broad knowledge of instrumentation and data
acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
NI FPGA, and signal conditioning.
Strong hands-on hardware troubleshooting and
debugging skills.
Technical requirements – Software
Experience using Source Code Control Systems
like Subversion (SVN) and TortoiseSVN.
Familiar with software communication protocols
such at TCP/IP, UDP, and modbus.
Familiar
with all current LabVIEW application architectures.
Experience
connecting LabVIEW to third-party database systems such as MySQL.
Strong
background in architecture design and development.
Good communication
skills, both written and verbal.
Experience creating documentation for large
scale LabVIEW projects spanning VI descriptions to system diagrams.
Experience writing software requirement
specifications.
Excellent people skills, must be a leader.
Previous start-up experience is a plus
Must be a
U.S. Citizen or a Permanent resident.
Please
email resumes to [email protected]. Thank you for your continued interest in
Xtreme Power Solutions, we look forward to being in touch with you.

Sir,
I am an instrumentation and control Engineer with 3+ years
experience.I am worked area is Process and Plant Design,Automobile
testing Machine and test rig Design,Special purpose machine Design.I
have knowledge in program developer of DCS,PLC,HMI,SCADA,LABVIEW as well
as trouble shoot.I am very interested in this job.
Thank you,
Shanmugam.J
+91 984042082

LabVIEW Developer + Software/Mechanical Engineer

Hello,
I am a LabVIEW developer with 3 plus years of experience in developing software applications for data acquisition, instrument control, motion control and image acquisition. I have a ME in Mechanical Engineering(control systems) from Texas A&M University. I am a Certified LabVIEW Associate Developer and currently working towards CLD status. I am located in TX and looking for fulltime opportunties as a Software Engineer/LV Engineer/Test Engiener. Willing to relocate, if the job is challenging and the offer is right.In addition to LV programming skills, I am experienced in J2EE,C++, object oriented methodology, UML and Visual Basic. If you are interested in my profile, send me an email and I will reply back with a full resume.Message Edited by marooner on 04-15-2005 01:30 PM

Adecco Technical is the leading provider of contract personnel and related staffing services. As a division of Adecco, the world's largest staffing company, ($13 Billion in sales), Adecco Technical has more than 100 offices in the U.S. alone.
Job Title: Labview Programmer
Labview Programmer with experience in motion control and high speed data acquisition.
RESPONSIBILITIES
The work incorporates the design and programming of specialty software for the motion control of high speed linear motors for the positioning and scanning of inline production parts.
Other projects include controls for process equipment.
This position requires a person who is well organized and can self manage a project from start to completion.
High degree of detail and the desire for perfection in the final product.
Perseverance to complete, detail, document and deploy the software.
REQUIREMENTS
A four year degree in Engineering is preferred.
Five years experience in Labview with at least three years in associating Labview in manufacturing automation and control.
The drive to accomplish projects and the need to get it right.
Thanks!
Elise Reisinger
Sr. Technical Recruiter
Adecco Technical
6081 E 82nd St., Suite 403
Indianapolis, IN 46250
317-842-2870
800-346-1203
[email protected]

Senior LabVIEW Controls Engineer--GOLDEN, CO

JOB DESCRIPTION
Vehicle Projects Inc is seeking a full-time, senior controls engineer for the development and demonstration of high-power hydrogen-fuelcell rail vehicles. For background on our rail-vehicle program, please google the keywords: (“fuel cell locomotive” “vehicle projects”). Responsibilities of the position include:
Overall fuelcell powerplant control system design, including integration with the vehicle control system
Computer modeling and simulation of hybrid powerplant operation
Design and development of complex LabVIEW control system applications
Preparation of electrical drawings, specifications, and test plans
Participation in laboratory and field testing of subsystems and vehicles
Data analyses
Part-sourcing and ordering of hardware
Support of hardware-build activities
Occasional technical support to other staff members’ projects, including research
Travel to build-facilities, test sites, and demonstration sites (based on the past 12 months as a sample, this position requires 17 % of work-days on travel)
QUALIFICATIONS
The successful candidate must demonstrate the following qualifications:
Self-motivation and ability to learn quickly
Self-confidence to thrive in the high-risk, high-reward R&D environment
8-10 years of experience with LabVIEW, including 4 years each with Realtime and FPGA Modules
Experience with the National Instruments cRIO platform
Experience with CAN communications
Familiarity with Ethernet networking
Ability to work closely with skilled trades people and understand the practical side of system design
Excellent communication skills, including the ability to interface with multiple international design teams
Excellent hands-on and troubleshooting skills
MS degree in Electrical Engineering, Computer Science, or Controls Engineering is preferred
Interest in scientific disciplines and having a scientific mindset are a plus
While the ability to learn fuelcell and hydrogen technology is essential, in-depth knowledge of fuel cells and hydrogen is not a prerequisite for the appointment.
COMPANY
Vehicle Projects Inc (since 1998), based in Denver/Golden, Colorado, serves the transportation industry by developing and demonstrating prototype hydrogen-fuelcell vehicles that address worldwide societal problems such as energy efficiency, energy security, and global climate change. Once a fuelcell prototype vehicle is built and tested, we provide it to industry for demonstration under working conditions.
The company has two independent associated nonprofit research organizations: Fuelcell Propulsion Institute (since 1996) and Supersonic Institute. The Fuelcell Propulsion Institute laid the foundations for the current development of railway locomotives. Supersonic Institute conducts research and educates the public on supersonic vehicles fueled by hydrogen.
Industrial clients and co-funders of our projects have included Placer Dome Mining Company, Newmont Mining Corporation, Caterpillar, Mitsui & Co (Japan), and BNSF Railway Co. Government funders have included the US Department of Energy, US Department of Defense, National Institute of Occupational Safety and Health (NIOSH), Government of Canada, and Government of Japan.
Our state-of-the-art facility, constructed in 2007, is part of the burgeoning west-Denver (Golden) corridor of renewable-energy companies, including the nearby National Renewable Energy Laboratory (NREL). Metro Denver (www.metrodenver.org), with a population of three million, is a well-managed city located at the base of the Rocky Mountains. With an average annual temperature of 50 F, low humidity, and 300 days of sun, its moderate climate is one of many attractive features of the city. Its citizens are in the top national percentiles for fitness, health, and formal education.
We believe our company’s most important asset is its people. New employees are selected with care, and successful employees are nurtured and encouraged to remain with the company through empowerment, highly competitive compensation, a generous benefits package, job-related training, profit-sharing, and a pleasant work environment.
COMPENSATION
A person of the caliber we are seeking will receive an above-average salary, employment contract, and a generous benefits package, including profit sharing.
APPLICATION
Apply by 4 April 2011 by sending an email-attached MS-Word letter of application, resume, salary history, and the names and contact information of three references. A portfolio in support of the application is desirable. The letter of application, addressed personally to the president of the company and using proper style for a business letter, should specifically address your qualifications and experience to undertake the stated responsibilities. Only applicants who write such a letter will be considered. The selection process includes more than one interview, a LabVIEW proficiency test, and a writing-skills evaluation. Please send application materials to [email protected].

I am a control systems engineer with 16 years of experience designing and building large systems using LabVIEW in Albuquerque NM and working currently for TEAM Technologies Inc. almost 15 years.
I hold a Master Degree in Space Power Systems graduated from Moscow Aerospace University.
I invented and implemented a message-driven and scripting controlled LabVIEW architecture which I presented couple times at NIWeeks, published in LTR, and local NI and ALVIN seminars. This architecture I was successfully used to develop projects for SNL (National Lab), WSTF (NASA), EMCORE, and etc. firms and organizations.
My expertise areas are: 1) Mechanical Engineering; 2) High Temperature Energy Converters; 3) Thermodynamics 4) Digital and Analog Electronics; 5) Programming: LabVIEW, C, embedded microprocessors (ARM, Cortex); Distributed hard real-time control with PXI and Compact RIO instrumentation.
I have published 45 scientific papers and have six patents.
I am NOT a certified NI LabVIEW programmer, because I believe that scientists and engineers has to have Degree Diploma only.
LabVIEW is just a programming tool nothing more.
Regards,
Youri Djachiachvili
Aerospace Engineer.
email: [email protected]

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

Reg: vacancy for LabVIEW developer in Bangalore, Chennai and Delhi with (1-6) years experience

Recruitment Process for LABVIEW: Tele Interview in case of outstation candidates. Bangalore candidates will have to first come for a Written Test (Technical + Analytical), 1-2 rounds of direct technical interview.
Degree/Branches: B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation .
ROLES AND RESPONSIBILTIES OF ASSOCIATE ENGINEER-SEG:
Development
1. Responsible for developing software for the project/module allotted to you with smooth coordination and smooth handing over of the work executed by one to another member in case of change of projects.
2. Expected to work on multiple projects, project dead line, adhere to coding guidelines and update your progress on the project on a weekly basis to your immediate supervisor.
3. Developing the software strictly as per the requirement specification, design and Bug free.
4. Responsible for building a trouble-free system to the satisfaction of the customer.
Installation
1. Responsible for installation of hardware and software at customer site for coordinating with the vendor and Manager – Sourcing to see that works done by the vendor is as per requirement specification
Customer Support
1. Responsible for providing support to the customer on the system supplied by the Captronic Systems in the past as well as present.
2. Attends to the support case within 48hrs(local) / 96hrs(outstation ) / 96hrs(out of warranty) of reporting and collecting the Support Closure Report from the customer and submit it to the SBU-HEAD
3. Informs Support executive with Support Status, Action Taken and Support Closed On
Training
1. Responsible for providing training to customer on the systems supplied by Captronic Systems.
2. Responsible for in-house training to newly recruited engineers.
Testing
1. Responsible for testing code developed by you, by another developer and testing entire system at the customer site.
2. Responsible for testing hardware supplied by Captronic System and log the test report on the hardware test register.
Sales Support
1. Expected to travel with sales team to provide support to sales-team in proposal making at short notice and perform flawless pre-sales system and requirement study.
General
1. Expected to take part in technical sessions and keep yourself abreast with the recent product released and technical advancement made
2. Expected to become domain expert is at least one field and to constantly improve coding style and knowledge.
Quality
Responsible for implementing the project methodology and quality policy of the company for all activities under your purview
Interested candidates may forward your resumes witheir current CTC and notice period to [email protected] . Salary is never the Constraint.

SANDU SUNITHA
D/o.S. Venkateshwarlu,
H.No:11/57, Kothapeta,
Maruthi Nagar,Dhone,
Kurnool (Dt.),
Andhra Pradesh.
E-Mail:[email protected]
Mobile : 91-9963586292/08884822259
Date: 09/ 05/ 2013
Respected Sir/Madam,
I have done my masters in Control Systems Engineering in Electrical
branch from Malla Reddy College of Engineering. I am a well organized
person, with good knowledge about the subject, able to do
multitasking, able to work within a team and have excellent
communication skills. As a good Engineer and excellent team player I
can handle the responsibilities and challenges of the post of an good
engineer to its fullest.
I have worked for 6 Months as Project Trainee in CSR INDIA PVT LTD. My
responsibilities in that institute include Testing, Reporting and
Debugging, Updating the bugs as a trainee fresher. I was a part of the
team that designed MERCURY TESTING TOOL, world's Best Automation tool
today. I tested the model and executed the changes.And i had worked as
Project Engineer in FUSION ELECTRONICS on Wonder ware SCADA. Presently
working as Project Scientist in NAL (National Aerospace Laborateries)
under Research and Development of IVHM(INTEGRATED VEHICLE HEALTH
MANAGEMENT) Project on MATLAB/SIMULINK ,Labview ,Wireless Sensor
Networks,WatchDog and Testing.
Here is the list of the documents enclosed with this cover letter.
1. Resume
I hope that you find these of worth. I assure you that if selected; I
will not let you down and would prove to be an asset for your reputed
industry.
Sincerely yours,
SANDU SUNITHA
Attachments:
SANDU_SUNITHA(29_Apr_2013).doc ‏176 KB

Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic. If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help. Thank you very much! -Nick
Nicholas Ricchiuto
B&V Stafffing Inc
724-933-5218
[email protected]
ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

Please post this to the LabVIEW Job Openings board.

Senior Test Automation Engineer LabView Perm Position in San Diego

Senior Hardware Test Automation Engineer- LabView
Company is, headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. Company is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
Summary
This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets.
As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional tests using LabView for production of Company products.
Duties & Responsibilities:
Create automated processes and test systems. Transition new products from prototype to production. Participate in design reviews. Develop test plans. Develop test software and hardware platforms. Review designs for manufacturability, improving cost & quality and increasing yields. Programming in high-level languages or scripting languages to control T&M Instruments and electromechanical systems. Program motion control and data acquisition systems. Develop test strategies to drive test time reduction. Develop test requirements and procedures in concurrence with design requirements. Document test procedures and results in conformance with ISO and FDA standards.
Required Qualifications:
Bachelors or Masters Degree in Electrical Engineering or similar discipline. At least 7 years experience in test automation, expert level designing and developing with LabView. Experience with relational databases. Experience with C#. Solid technical and theoretical background of electronics hardware and software. Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines. Good interpersonal skills, including good technical communication skills, must be self-directed, self-motivated and be able to work in a cross-functional team environment. Ability to work in a highly dynamic environment. Advanced knowledge in setting up ATE test suite running on LabVIEW. Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer. Experience in RF is highly desirable. Advanced software-programming skills. Experience in statistical data analysis tools. PCB in-circuit and functional test knowledge is an asset. Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset.
Please send resume to: [email protected]: 951-303-1841. Company offers an excellent benefits package and great work environment.
Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Please find attached resume.
Thanks & Regards
Anil Punnam
Attachments:
Resume_Anil.pdf ‏1 KB

LabVIEW developer in UK

My company a large multinational with more than 10000 employees worldwide, is currently looking for an "entry level" LabVIEW developer in the North East of England, although all levels of experience could be considered.
If anyone is interested, please email your CV and Covering letter to [email protected]
This is the Job description:
1.    General information
The Engineer will work as part of a team developing software and hardware applications that support the needs of manufacturing. These will include in-house developed solutions for automated assembly, functional test and production monitoring. The Engineer will develop expert knowledge of the company's products and systems in order to best support these developments.
2.    Job Objectives
Efficiently design, program, document and maintain robust, user friendly, software and hardware solutions that reliably provide the required functionality and performance levels to support manufacturing processes.
3.    Opportunities
Work with a wide range of technologies (software, hardware and product).
Develop personal skill levels with support towards achieving recognized LabVIEW qualifications.
Participate in both site wide software initiatives and stand alone test or application solutions.
Work alongside experienced LabVIEW developers.
4.    Place in the organisation
Direct Manager: Manufacturing Engineering Manager            (via Senior Engineer)
Reportee(s):            0
5.    Description of duties
Contribute to generation of software requirements and specification documentation
Generate appropriate documentation and records during software creation, amendment and testing, utilizing standard revision control and review procedure.
Propose and implement new/best practice software development techniques
Contribute to creation of future strategic targets
Assist with the training and guidance of apprentices, operators or others where appropriate
Undertake training and development activities where appropriate
Occasional travel off-site to conduct inspection of new equipment, attend training courses and provide support to remote sites
6.    Required competencies
Education:
Essential
Degree level qualification or similar experience
Desirable
Degree in Science, Engineering or relevant Technical Subject
Experience:
Essential
Previous experience creating software to interface with hardware using LabVIEW
Desirable
Experience of an industrial work environment
Skills & knowledge:
Essential
Experience of LabVIEW programming, CORE 2 level
Experience with automation hardware
Desirable
Knowledge of developing test software for automatic execution
Experience with other programming languages (C, Assembler, Java etc)
Object oriented programming knowledge
Knowledge of SQL database implementation

Dear Sir/Madam:
May I know what is the company? I would like to know its name in order to be aware of future similar opportunities.
Kind regards.
Attachments:
Presentación Julio 2011.ppt ‏2943 KB

Labview Developer Position in Northern New Jersey

Aavalar Consulting has been engaged to provide a Labview Software Engineer.
A job description follows:
Title:   Labview Developer (Test Applications)
Work Location:       Northern NJ Area
Is Telecommuting possible?    No
Work environment:   Cube in a suburban office building with a nice atmosphere and great parking.
Who does this position will report to?:   Vice President Software
What is the start date of the contract?:   ASAP
What is the size of department?:     <40
What projects will the engineer be involved with?:
Automated Instrument Control and Automated test of new hardware components
Software development in Labview and Test Stand to automate a Burn-In station.
Responsibilities:
Responsible for the creation of software to enable test instrumentation to command and receive data from systems to be tested. Will assume overall responsibility for the software on assigned projects for various Optical, Telecom, Automotive, Wireless and Aerospace products. Individual will develop and present software presentations to customers.
Role with the group: Developer - Individual Contributor - No management
Required Skills:
Bachelors degree in EE, CE, or CS or equivalent education with 2-5 years experience in related field. Experience in development of test system software using Labview, Lab Windows/CVI or Visual Basic required.
Desired Skills:
Instrumentation automation
System Integration
Documentation
>     Experience developing instrument control routines with Labview
>     Experience with Test Stand
>     Software Documentation experience
Selling point of the job:
State of the art technology and a good group of people.
Work Hours and Schedule:
Standard business hours with flexibility after a level of trust is established
Is overtime paid, and is it at straight time? Straight Time or Salary Position
Dress Code:   Casual to Business Casual
Who is involved in the interview process?     Vice President of Software, and the President
Target Salary: Open
Please submit a word version of your resume to [email protected]   Thank you.
Sean Handforth
Email: [email protected]
Aavalar Consulting, Inc.
Swedesford Corporate Center
649 Swedesford Road
Malvern, PA 19355
www.aavalar.com
Phone: 610.889.9990 x12
Toll Free: 877-4-AAVALAR
Fax: 610.889.9995
Cell: 267.278.2698
Aavalar provides contract software developers,
hardware engineers, systems administrators,
database administrators/architects, etc.
for Engineering as well as IT environments.
Retained and contingency search, as well
as recruitment process consulting is
also provided for clients who are building
in-house technical staff.

HI
I was just wondering if the call for an experienced LabVIEW developer with a background in Scanning Probe Microscopy is still open.
Best regards
Dr. Zoran Ristic

Systems Engineer(LabVIEW)

Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014

Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal

Controls Engineer, Chattanooga TN

      My name is Mike Morgante. I am the manager of Control Systems Development for Tuftco Corporation (http://www.tuftco.com/). We are in the business of manufacturing carpet tufting machines and carpet finishing equipment. I am in charge of developing servo-controls for the Machine Division. We have designed, manufactured, and delivered tufting machines that have over 1800 servo-axes whose motion is tightly synchronized to the motion of the main stitch drive of the machine. We are currently in a search for a Controls Engineer to assist us with this work.
      Below are the salient characteristics we are looking for. Please feel free to circulate this to anyone you believe may have an interest. If anyone has specific questions about what we’re working on, please don’t hesitate to give them my email address ( [email protected] ) for a response. Also, if someone is interested in applying, please have them forward their resumes to me, or Mr. Mike Minter ( [email protected] )
      Thank you in advance for considering assisting us.
      Kind Regards,
         Mike Morgante
Required Skills
BS in Electrical Engineering with emphasis on Automatic Control Systems
Solid understanding of Closed Loop Control Systems
Real-time or embedded systems development and troubleshooting experience
Familiarity with rotational or linear sensors and actuators
Ability to analyze requirements and recommend appropriate actuators, motors, and controllers
Familiarity with the laboratory instruments used to verify and troubleshoot Servo System performance
Good verbal and written communications skills
Field troubleshooting of controls problems
PC fluency
0 – 5 years field experience
Additional Desired Skills
Computer modeling of dynamic system performance
Programming National Instruments Hardware via LabView
Programming exposure with C++ and C# languages
Familiarity with PLC applications and programming
Exposure to control cabinet layout, wiring practices and thermal considerations

Dear Sir,
I Amit Amrutkar have completed B.E. Instrumentation & Control Engineering.
Currently, I am working with VI Automation, Pune on LabVIEW, PLC development, NI products system integration from July,2010 to present.
I have attached my CV herewith. Please look into the same and revert back if my profile is matching with your current requirement.
Looking positively.
Amit Amrutkar
Attachments:
Sr.Automation Engineer with 1.9 yrs exp.doc ‏124 KB

PDA LabView development per User's manual.

Develop PDA software as defined in the attached User's manual under Windows Mobile 5.0. Hourly compensation, possible off-site work. Thanks for looking.
Attachments:
DNTUSER2.pdf ‏790 KB
DNTUSER3.pdf ‏790 KB

Hello,
Here is an example of a LabVIEW project I did last year
http://www.inventeering.com/MassArray_NanodispenserRS1000(screen_samples).gif
Here is an example of a LabVIEW project I am currently working on.
http://www.inventeering.com/OLED/OLED_Demo1.wmv
I would like to introduce myself and offer my engineering consulting services. My name is George Miles and I am Electrical Engineer and the owner of a small Engineering Consulting Firm. I have over 25 years of engineering experience in a multitude of fields and areas. Fifteen of those years have been
providing manufacturing, engineering, and National Instruments (NI)
hardware and software development services and support with LabVIEW and
other NI products.
Hardware/Software
design Engineering, Systems Integration and LabVIEW development are a
key focus of my services with proficiency areas including test and
measurement, data acquisition, instrument controls, vision systems,
R&D product development in industrial automation machines,
bio-medical devices and fiber-optics sensors.
I
have been providing engineering services to fortune 500 companies and
small to mid sized corporations across California, Pennsylvania, New
Jersey and Massachusetts. Since its inception, INVENTEERING has
provided engineering solutions to a diversified industry of
manufacturing, engineering, avionics/aerospace, communications,
automotive, bi-medical and defense. I can provide project solutions and
hardware/software engineers for both large and small projects.
Please contact me to discuss any engineering hardware or software needs you may have.
Best Regards,
George Miles
INVENTEERING, Inc.
3943 Riviera Dr. Suite A
San Diego, CA 92109
Tel: 858-273-8483 or 858-926-5927
Fax: 858-270-8780
Skype: skype.gmiles (Free Internet Video
Phone requires Skype™ Software)
Email: [email protected]
Website: http://www.inventeering.com
Message Edited by [email protected] on 04-11-2008 08:32 AM
Message Edited by [email protected] on 04-11-2008 08:33 AM
Message Edited by [email protected] on 04-11-2008 08:36 AM

Hiding and Displaying TS UI Controls from LabView

We have a custom TestStand User Interface, written in LabView, that is a modified 'Simple' User Interface as installed with TestStand.
When our UI is initialising the TestStand UI controls are immediately displayed with nothing displayed inside them, this looks very untidy. Is there a way of hiding and displaying TS UI controls on demand?
Regards
Steve
Message Edited by SercoSteve on 03-09-2006 09:22 AM
There are 10 types of people in the world that understand binary, those that do and those that don't.

TestStand I am still learning, but LabVIEW I know. There are several things that you could do. One thing would be a splash screen. I don't think that this is what you are after, though.
Each control has a terminal on the block diagram. If you right click on the terminal, you can create a property node. There are lots of properties that you can set on a control, including whether it is visible or greyed out. I think you want to hide the controls and SAVE the VI that way. Then, when the VI is run, where the control/indicator gets its data, set it to visible with the property node as well. If this is in a subVI, you might need to create a reference to the control/indicator and pass that into the VI as well. You can then wire it to a property node in the subVI.
There are several examples on using property nodes that ship with LabVIEW that should be able to get you started.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Fresher Control Engineer / LabVIEW Developer

Similar Messages

Maybe you are looking for