Fresher - Need Help - Whate is SAP

Hi,
Am fresher and I want to learn SAP.
Could any one of you please answer to my doubts.
What is SAP. Is it business related.
How many modules does it cover.
What is its beauty. i.e. why people are moving towards it.
what are the opportunities.
Early reply is appreciated.
Thanks in advance.
Sree Madhuri

Hi Sree
What is SAP? Systems, Applications & Products in Data Processing
What is SAP
Facts about SAP
Founded by five former IBM employees in 1972 (History) and headquartered in Walldorf, Germany.
Leading global provider of client/server business software solutions.
Number one vendor of standard business application software, with a worldwide market share of 31%.
Fourth-largest independent software supplier in the world.
Available in 14 languages.
34% of SAP's customers worldwide are under $200 million.
10 out of the top 10 US companies with the highest market value use SAP software.
8 of the top 10 largest US corporations use SAP software.
8 of the top 10 highest profit US companies use SAP software.
More than 7500 customers in over 90 countries have chosen SAP.
Reported revenues of DM 6 billion in the most recent fiscal year, a 62-percent increase over 1996 revenues.
SAP is not any longer a one-product-company.
Eight Reasons to Use SAP R/3
Global Basis
Faster Speed
Flexibility for Changes (Business & IT)
Agility
Extended Supply Chain Management
Reach New Opportunity
Knowledge Sharing
Creativity Focus
Cheers:)
Mithlesh
Message was edited by: Mithlesh Jha

Similar Messages

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
my phone was not jillbreak or hacked to unlock. i need help, what can I do?

Did you do the Reset Network Settings as I described above?
There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
Or Restore your iPhone from your backup in iTunes.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?

I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?

I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?

Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy

I NEED HELP what i have to do with Palmrest discoloration on my macbook

I NEED HELP what i have to do or where i have to go to Palmrest discoloration on my macbook.

well i hope i could but i live in Puerto Rico. theres no apple stores around here. i buy my mac in compu usa here in Puerto Rico i went to the store to show them the problem but they told me that i have to get online and contact apple for a number that the store will use to order the replacement for my laptop but i dont know where i have to go to request this number my macbook have just 3 month with me and it looks really bad!
Message was edited by: Host

Updated to Mavericks now my Toshiba External HDD 3.0 won't mount need help what to do

I recently updated to mavericks now my toshiba external hard drive wont connect and i have some important data need help to get drivers im assuming its the drivers but need help to locate the drivers

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

3g ipod was used till battery was dead then charged now it is asking to download itunes again but cant with lock code i need help what can i do

I need help on this question

hello
if you don't know the lock code, you will have to reset and restore your ipod
Please rad this article from Apple knowledge base
http://support.apple.com/kb/HT1808
bye

Need help - MDM -XI - SAP R/3

Hi,
we have got requirment that is to transfer chart of accounts from MDM to SAP r/3 through XI. As i have not worked on MDM Side, can anybody suggest some points , how to do that.
Regards,
Raghu.

Hi Gurus,
I have a few questions regarding my XI and MDM installation ....
1: Can we have XI and MDM installtion done on the same box using same
hostname.??
2. Can you please let me know as to what should be the minimum or a good
server configuration for a MDM Installation.
3.Also if someone can please provide the configuration steps for a
successful MDM installation or can provide a helpful link where i can
find the confiuration steps.
4. Any realtime e.g of XI interfacing with MDM.
I hope i get to hear from the gurus very soon .
Thanks,
Sanjay.

Need Help to install SAP ECC

Dear all,
I am installing ECC6.0 on windows 2003 x86_64bit, When I install it and need to input the path of Java Component NW 7.0 SR3 Package, and click next, but it appears the error as below:
"Found the lable ORACEL:............10g CD:WINDOWS_X86_64:AMD64:CD51030XXX but need the label SAP:UT:NW04SSR3...*",
Anyone could tell me the correct path of Java Component NW 7.0 SR3 ?
I don't install use the CD, I install by dowload files.
Thanks & Best Regards,
Michael

Hello,
Please download (if you don't have done so) the following files from http://service.sap.com/swdc:
EXE 51033513_1 NW 7.0 SR3 SP14 Java based SW Comp. 1 of 4
RAR 51033513_2 NW 7.0 SR3 SP14 Java based SW Comp. 2 of 4
RAR 51033513_3 NW 7.0 SR3 SP14 Java based SW Comp. 3 of 4
RAR 51033513_4 NW 7.0 SR3 SP14 Java based SW Comp. 4 of 4
After downloading, exteract it, and apoit to the extracted folder.
Hope it helps!
Regards,
Gamer

Need help with the SAP Enterprise connector wizard at the NWDS

Hello,
I am trying to create new proxy using the SAP Enterprise connector at the Netweaver Developer Studio.
The problem is that at the 2nd stage I am unable to connect to the server. Can someone please explain me in details:
1. Which tab should I chose there: Load balancing server or single server?
2. Which parameters should I enter there and from where can I take them (uch as System number...)
I tried to enter my server's parameters but I couldn't connect.

Hi Roy,
It depends on what type of R/3 server you are connecting. Usually development & Quality assurance systems for R/3 are not load balanced. You can find it out from your Basis people that server you are connecting is load balanced.
If it is not load balanced then the select the single server and enter the following parameters.
1. Host Name: Server Name (or ip address)
2. System Number: (00)
If it is load balanced then fill out all the information on load balancing tab.
You only need to fill one of the tabs. thank you.

Need help in migrating SAP Bex Reports to BO

Hi Experts,
We have a requirment where we have to transfer bex reports to BO. Now my question is
whether all the logic performed in Bex Query designer is possible to achive in BO?
Like Customer Exit codes, Filters, Conditions,Exceptions ,Cell Definitions,Hierarchies,
Variables (text,charateritisc etc) .
Please can anyone suggest me on this any sort of document or material is very helpful.
Thanks & Regards
Sameer Khan

Hi,
Customer exit we can't write in BO,it need to be in Bex side only.
Filters-we can define any where.
Variables(char)-we can define any where but i'm not sure about Text variables.
Please have a look at the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008d15dc-f76c-2b10-968a-fafe5a121129
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0320722-741c-2c10-afab-93b5c0fc7e96
Thanks

Need help, What to do when EIS unavailable?

Hi all,
Does anyone know how to implement the following behaviour? :
I am doing a WLI project which requires integration of sap and siebel and
I want to implement the following behaviour :
ü Independence / asynchronous. The Siebel and SAP applications must be
able to run completely independent of each other when the interface is
deployed. When one application is unavailable, the other must run as usual.
Any "postponed" interfacing because of unavailability of the other
application must be executed when both applications are available again.
Anyone knows how to do the "postponed" interfacing ?
many thanks,
cheers,
Kris

Kris,
Yes, you can implement a BPM exception handler to do the wait, but as you
indicate, you'll need to know exactly how to interpret the exception
received from the adapter.
Tim
<Kris> wrote in message news:[email protected]...
Hi thanks for your reply...
It actually is undetermined for the time being but I still have to discuss
that with the client...
What I want to avoid is tweaking the adapter ... If you buy one
off-the-shelf then there is little tweaking to it...
Can't you resolve it a the BPM level by interpreting the error message and
modelling a retry logic in the BPM and eventually a real error ? Any ideas
on that ?
thanks,
Kris
"Timothy Potter" <[email protected]> wrote in message
news:[email protected]...
Dear Kris,
How long is SAP or Siebel going to be down? Seconds, minutes, hours,
days,
or undetermined? This is important because WLI has already accounted forthe
seconds case in our CCI Connection acquistion logic. If longer, then
"how
long?" is also important because you need some measure to establish theping
interval, i.e. if SAP is going down for days, then you don't want toattempt
to get a connection every other second (I wouldn't want to know what thelog
file with 2.5 million exceptions per day looks like). Anyway, the
typical
design pattern is to implement logic that is specific to a given EIS inthe
adapter and anything that is generic across EIS in the application
server.
Unfortunately, there is very little support for this in the ConnetorSpec
to
allow the application server to do some of the work for you.
Consequently,
you might have to solve this one at the adapter level for now. Theadapter
should be able to interpret the error message received from the EIS
connection API to determine if it should queue a request and retry it
sometime in the future.
Best regards,
Timothy Potter
Senior Software Engineer
eCommerce Server Division
BEA Systems, Inc.
<Kris> wrote in message news:[email protected]...
Hi all,
Does anyone know how to implement the following behaviour? :
I am doing a WLI project which requires integration of sap and siebel
and
I want to implement the following behaviour :
ü Independence / asynchronous. The Siebel and SAP applicationsmust
be
able to run completely independent of each other when the interface is
deployed. When one application is unavailable, the other must run asusual.
Any "postponed" interfacing because of unavailability of the other
application must be executed when both applications are available
again.
>>>
>>>
Anyone knows how to do the "postponed" interfacing ?
many thanks,
cheers,
Kris

TS3694 when i update my iphone unlock I see error code 3194. I need help what I need to do?

HI
I am update my phone for unclock, but it show message error code 3194
What I need to do, May you can help me
thanks

Hello there, morganbailey02.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

I need Help what is wrong with my code?

Hi, well I am doing a class and a driver for a sphere. I need to compute the volume and surface area of the sphere I have the formula but when I run the program I don't get a result for neither. I would like to know what am I doing wrong? Here is my code. Thanks.
This is my class
import java.text.DecimalFormat;
    public class Sphere
   //Variable Declarations.
      private int diameter;
      private double radius;
   //Constructor: Accepts and initialize instance data.
       public Sphere(int sp_diameter)
         diameter = sp_diameter;
   //Set methods: Diameter
       public void setDiameter(int new_diameter)
         diameter = new_diameter;
   //Get methods: Diameter
       public int getDiameter()
         return diameter;
   //Compute volume and surface area of the sphere
       public double getVolume()
         return 4 * Math.PI * radius * radius * radius / 3;
       public double getArea()
         return 4 * Math.PI * radius * radius;
   //toString method will return one line description of the sphere
       public String toString()
         DecimalFormat fmt =new DecimalFormat("0.###");
         String sphere = " " + fmt.format(diameter) +fmt.format(getVolume()) + fmt.format(getArea());
         return sphere;
Here is the driver
public static void main(String[]args)
         Sphere sphere1, sphere2, sphere3;
         sphere1 = new Sphere(10);
         sphere2 = new Sphere(12);
         sphere3 = new Sphere(20);
         System.out.println("The sphere diameter are: ");
         System.out.println("\tFirst Sphere diameter is: " + sphere1);
         System.out.println("\tSecond Sphere diameter is: " + sphere2);
         System.out.println("\tThird Sphere diameter is: " + sphere3);
      //Prints the Sphere Volume and Surface Area.
         System.out.println("\nTheir Volume and Surface Area: ");
         System.out.println("\tSphere1: " + " " + sphere1.getVolume() + " " + sphere1.getArea());
         System.out.println("\tSphere2: " + " " + sphere2.getVolume() + " " + sphere2.getArea());
         System.out.println("\tSphere3: " + " " + sphere3.getVolume() + " " + sphere3.getArea());
      //Change the diameter of the sphere.
         sphere1.setDiameter(11);
         sphere2.setDiameter(15);
         sphere3.setDiameter(25);
         System.out.println("\nNew diameter is: ");
         System.out.println("\tFirst Sphere diameter is: " + sphere1);
         System.out.println("\tSecond Sphere diameter is: " + sphere2);
         System.out.println("\tThird Sphere diameter is: " + sphere3);
      //Prints the Sphere Volume and Surface Area.
         System.out.println("\nTheir Volume and Surface Area: ");
         System.out.println("\tSphere1: " + " " + sphere1.getVolume() + " " + sphere1.getArea());
         System.out.println("\tSphere2: " + " " + sphere2.getVolume() + " " + sphere2.getArea());
         System.out.println("\tSphere3: " + " " + sphere3.getVolume() + " " + sphere3.getArea());
      //Using the toString Method.
         System.out.println("\nFirst sphere: " + sphere1);
   }

Maybe try a different constructor for sphere...
public Sphere(int sp_diameter, int sp_radius)
diameter = sp_diameter;
}nd maybe even a setRadius(int newRadius) and
getRadius().
Hope that helpsYou should not do it this way. The reason.. The radius is 1/2 the diameter. if you have seperate methods, then the programmer can set the diameter to X and the radius to 10X. not good.
A better way for the c'tor would be:
    //Constructor: Accepts and initialize instance data.
    public Sphere(int sp_diameter) {
        diameter = sp_diameter;
        radius = (double) diameter/2.0; //<-- I added this
    }something similar in the setDiameter..

Need help here for SAP Business One 9.0

I want to give SAP Business One 9.0 exam (C_TB1200_90). Is this certification available in Pakistan? If its not available should I give 8.82??

Dear All
The following links are referred by SAP support or expert, but one is intercompany 1.1 another is 2.0.
Both of them are read, but it still not help for configuration.
For the training and documentation, you may refer to the following. Thanks
https://websmp210.sap-ag.de/~sapidb/011000358700000562632012E
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002702&_EVENT=DISPLAY&_HIER_KEY=201100035870000001783&_HIER_KEY=301100035870000002834&_HIER_KEY=501100035870000019706&_HIER_KEY=601100035870000248281&_HIER_KEY=601100035870000257616&

Fresher - Need Help - Whate is SAP

Similar Messages

Maybe you are looking for