Fresher

Hi...
I am Balaji from india,chennai.... An B.tech(IT) graduate 2005 passedout....
currently working in a BPO for 8 months.. Now looking for a change in career.. so started studying ABAP... i am good in programming as wel communication...
looking for a job in Sap right now..
how to get a job.. wat should i do ...
YOur early reply in much appreciated...
Thanks in advance...

Post in the correct forums maybe, you'll have much more luck...

Similar Messages

With Windows Vista, the most recent Itunes update 1/30/2014 has caused Itunes not to work, with a Mscvr80.dll not found error. Uninstalled all Apple programs, and installed fresh Itunes. Same problem. Tried to reinstall using an older install exe nogo

Recent ITunes update has caused ITunes not to work. Tried uninstalling all Apple products and reinstalling fresh. Still doesn't work. Tried reinstalling from an old install.exe. Install went nicely but program won't start as it says it can't open the library file.

Now that I have no way of accessing any of the products I have purchased from ITunes, I will most certainly never use ITunes again for any reason. Why throw good money after bad? I will use another MP3 player that is not as cumbersome or proprietary.
Lesson learned.

Fresh install Win 8.1 Pro into Pavilion X2 (10", 32GB tablet)

Have a Pavilion X2 (32GB version) with Win 8.1 Bing.
Need to get into domain, therefore wanted to fresh install Win 8.1 Pro, at the same time remove the recovery partition for more space.
F10 to bios to set bootup to USB drive, pops in a Win 8.1 Pro x64 installation disc, but X2 refuses to boot to disc.
Is it the x64 version disc problem or have i missed some setting to make the X2 boot to disc properly??

HI @Nikola84 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are trying to install a clean version of Windows 8.1 ( 64 bit).
What edition of of Windows 8.1 (64 bit ) are you trying to install?
Please provide your exact model of Pavilion 10 x 2.
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9

I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
-How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
-How do I ensure that I have the hardware configured on
a macintosh to run properly.
I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.

Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
to the VISA software.
If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
I hope this helps.
Brian

Problem with Fresh Install of OEL 6.3 x86_64 over old OEL 6.0 x32

Dear Experts,
After selecting packages for fresh installation of OEL 6.3 x86_64 over old OEL 6.0 32-bit, it gives me the following warning
Some of the packages you have selected for install are missing dependencies. You can exit the installation, go back and change your package selections, or continue installing these packages without their dependencies.
Details
lvm2-2.02.83-3.el6.i686 requires lvm2-libs = 2.02.83-3.el6
kernel-uek-2,6,39-200.24.1.el6uek.x86_64 requires kernel-uek-firmware = 2.6.39-200.24.1.el6uek
lvm2-3.02.72-8.el6.i686 requires lvm2-libs = 2.03.72-8.el6
gdb conflicts with elfutilsHow to avoid this warning?
Best Regards
Mahmoud

Hi Dude,
Thank you for your response.
I didn't choose upgrade. I chose Fresh Installation.
Sorry for not giving background about the problem
The OEL 6.0 x32 was installed on a server with 64bit architecture, so the power of the server is not utilized well.
I want to completely replace the OEL 6.0 (32 bit) system with OEL 6.3 (64 bit)
Just I choose the mount point of /root and /boot and leave the all partitions with no formatting to save the old data
The above warning in the first post appears. How to avoid it?
Regards
Mahmoud

I am trying to fresh install Mavericks (it gives me no other choice) on my erased MacBook Pro HD prior to selling on. It does not give me choice to use any other OS. Yet Mavericks is not available. ?? What to do please?

I wish to sell my 2008 MacBook Pro. Have erased hard disk and when I went to fresh instal Mavericks OSX 10.6 (it gives me no other choice in the disk utility program) It says in the Apple Store, it is unavailable. But because this is done from disk utility there is no operating system or access to choose another OS eg Yosemite. I cannot download anything using my iMac as that came ready loaded with Yosemite, so it does not show as a purchase. I do not want to use the Time Machine backup as that has all my details, apps etc. in it. Would the best way be to purchase a disk containing Mavericks the OS that was on it most recently. Can anyone offer advice please?

You need to re-install the OS the computer shipped with using the disks that were supplied with the computer. Contact Apple Support and have the serial number of your computer available. They will send you new disks for a small fee.
Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Unable to split the only visible partition (C) on a fresh system - 4 primary partitions

Hello,
tl;dr I am probably stuck with 4 primary partitions (two WINRE, EFI, and C), and unable to split C on a fresh system installation from HP DVDs.
320GB HDD has failed on my G6 2233 HP laptop. I've mounted a 500GB replacement, and done the following things:
installed Windows 8 from the HP System Recovery DVDs (provided by HP, not recorded by me, fresh installation)
removed the recovery partition with HP Recovery Manager
installed all Windows 8 updates, and HP Support Assistant updates
upgraded to Windows 8.1
installed all Windows 8.1 updates, and HP Support Assistant updates
Went to the system partition tool, to see 4 primary partitions created...
At this point I was unaware, this may be an issue. I've tried to split C as seen on the image. Wasn't able to set desired values (max value was to about two of equal size, due to ummovable files), but that was nothing new for me - on the previous 320GB HDD I've ran into the same issue, as I could (but COULD) do two about 14xGB partions.
Here I've wished for 120GB and 344GB.
Anyway, even with various values I've got an error on the next step, claiming that there is no room on the HDD.
Then I've decided to try EasyUS software, as it helped me in the past.
First screen is without any action (there is a bunch of weird partitions there, all created by HP software/OS).
I could choose to decrease the partition size, but option to create on from the unallocated space was not active.
I am confused. If I am not mistaken, I should not remove the two WINRE and one EFI partition, but I either convert C to logical partition (have no idea how, this option is not active on EasyUS (could do that on my USB HDD drive), or remove one or more of the other primary partitions.
Even if I will find a way to convert C to logical, is that safe, and should I after D is created return C to primary?
I've tried to play safe, and let the HP/OS software do the job, and they left me with 4 primary partitions...
OK I've found the guide which sadly does not seem safe... Any other ideas?
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...
Unfortunately they seem to habe different names... Probably are doing simmilar things, but could someone just point out is the EFI partition HP Toolls as mentioned in the guide etc.
I guess I should, after installing Windows 8, and removing the recovery partition, create a new partition then, and upgrade to 8.1... Would solve many issues, however I am not sure it would work, and really, do not want to waste two more days on this...
This question was solved.
View Solution.

Hi @IgiveUpOnHP ,
I grasp you are having an issue with partition the drive.
Windows only ever allows 4 primary partitions because the word primary is only applilcable to the MBR partition tables which only allow for 4 partitions. You can have extended partitions. Here is a link to Partitioning and Naming Drives (Windows 8) as a guide.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

HP Pavilion m6-1035dx, product B5S06UA#ABA
Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

I suspect this may all be related to a common cause.
When updating the windows experience index, what is the error message you receive?
Has the video card driver been installed? It is necessary for the windows experience index to complete.
Also, ensure the HP Software Framework is installed. It is under the Software Solutions category.
You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Satellite C660 - need help with fresh Win7 installation

After a problem with my SatC 660 i decided to Nuke the hard drive and do a fresh install using a W7 32 Bit disk created from the web ( there is a free library of Windows 7 iso images (Sorry forgot name).
So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Looked everywhere for the drivers for the DVD Drive but no joy on the web.
Can anybody help me out please?

Maybe stupid question on the beginning but why you don't install original Win7 64 bit? I presume you got your machine with preinstalled operating system.
> So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Sorry but after reading this sentence Im completely confused and don't know how to understand this. If you have created bootable installation disc I hope you were able to install Win7 correctly. After first start you must continue to install all necessary drivers, tools and utilities that you can find on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Optical disc drive uses Microsoft driver and there is no some special driver for this device. It must be recognized automatically by preinstalled operating system.
If my posting was not helpful for you please be more precise with your problem description.

Fresh Installation Boot Errors

I'm new to trying to work with Solaris 10, and to a lot of Solaris in general, so while I'd normally be happy to do a lot of reading (and have tried searching for answers on google a good deal already), I'm having a problem after a fresh installation of Solaris 10 on a Sparc T3-1 server that I'm hoping someone can point me in the right direction to solve.
During the install I told the text installer I wanted to do a ZFS installation using both of my disks (only 2) in a mirrored configuration. I selected the default set of core system packages.
After the install seemed to be done and the system rebooted, I'm getting the following when it comes up:
Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5000c5003a04f911,0:a File and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Failed to plumb IPv4 interface(s): igb0
Jul 7 12:12:34 svc.startd[9]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.
Jul 7 12:12:34 svc.startd[9]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Hostname: tempdb
Loading smf(5) service descriptions: 1/136
WARNING: svccfg import /var/svc/manifest/application/management/sma.xml failed
2/136
WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
3/136
WARNING: svccfg import /var/svc/manifest/application/management/seaport.xml failed
followed by another 133 lines with similar failures, followed by:
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
WARNING: svccfg apply /var/svc/profile/generic.xml failed
WARNING: svccfg apply /var/svc/profile/platform.xml failed
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Reading ZFS config: done.
Mounting ZFS filesystems: (6/6)
After doing a new install off of the install media (cd) I would have expected the system to be able to boot without errors, but obviously I've missed something or done something wrong, and I'm hoping that someone can point me in the right direction for figuring out what that is and fixing it.
I'm happy to provide any other details if there are questions.

I do see a few messages in the installation log that give me concern. The first is:
*Creating and checking file systems
- Creating rpool/ROOT/rdata dataset
- Creating dataset rpool/ROOT/rdata/var
libshare SMF initialization problem: entity not found
libshare SMF initialization problem: entity not found*
There are also quite a few instances where a PKG installation says something like this:
*Installation of <SUNWcnetr> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
346 blocks*
or
*Installation of <SUNWj5dvx> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
7153 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.dir>failed
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ailed
pathname does not exist
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.alias.all> failed
pathname does not exist
Installation of <SUNWaspell-en-share> was successful.
14501 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/TTbitmaps/fonts.dir> failed
pathname does not exist
Can't open ./fonts.dir
Can't open ./fonts.dir*
There are also a few that say:
Reboot client to install driver.
The installer did seem to reboot at the end. Does the installer handle those 'reboot client' cases itself?

ITunes will not work on Fresh INstall of Vista x64 SP1

I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?

Read this scary microsoft support article on windows updates?

Satellite L655 - Sound not working on fresh install of Windows 7 Pro x64

Howdy all,
I purchased an L655-S5111 from Newegg that was on sale, put an SSD into it, and then installed a legitimate copy of Windows 7 Professional 64-bit I received from my current employer (I'm an IT guy). I've updated to the latest BIOS revision (1.70), and I've got all Windows updates installed, all drivers installed, including the correct Conexant HD Audio and ATI HDMI Audio drivers. Unfortunately, sound does not work. Sound worked briefly when I first installed Windows 7, then I muted it until I could get it set up with headphones. When I unmuted it, it had ceased to work.
This laptop is less than 3 weeks old at this point, and I get no audio over headphones or speakers, although Windows clearly shows no issues with the drivers, they're the latest version, on a fresh install, and I can see the audio in the mixer playing. The microphone built-in to the laptop does pick up sound as well. I believe that this is most likely not an issue of physical interconnection, but more likely a software level issue, I'm just having trouble identifying where it is at.
I also have no related error messages anywhere in the event logs.
Message was edited by: ADMIN

I have two problems with installing the recovery image:
1) I didn't get a copy of the recovery media with the system
2) The recovery media would install Windows 7 Home Premium 64bit which is what came with the laptop.
Since I have legitimately licensed copies of Windows 7 Pro/Enterprise 64-bit, I would much rather install that. Since I used the drivers and software from the Toshiba website for this particular model, it should be working. There should be no functional difference between the recovery media and a fresh Windows install from the Microsoft-provided Windows media and Toshiba provided drivers from their website.
As you can see in the sysinfo (I'm assuming Keany the respondent is the admin that approved my post and edited it, thus had access to the data which was removed) I have all the Toshiba software and drivers installed, identically to if this was the recovery image, I just have it on a different edition of Windows 7.
I'm open to any other suggestions, but unfortunately it is not possible to do the above.

USB Boot does not work on factory fresh device

SO we're working on adopting the surface pro 3 for our organization. I've just run into an issue. We're currently bootstrapping the SCCM OSD process off of USB thumbdrives, we have are working on upgrading to a supported PXE platform, but for now we have
to use the thumbdrives. The issue is, on a fresh, out-of-the-box Surface Pro 3, the Power-button + Volume Down will NOT boot of of USB. The only thing that works is to keep booting in the factory sysprep until it finally asks to take you to advanced recovery
options where you can then select the USB device and it works fine from there. After the device has been imaged, the volume down + power trick works every time, just not when straight out of the box. This is obviously an issue fore the guys doing the imaging
as it slows them down considerably. Any ideas why this is happening?

That sounds rough... I have new surface pro 3 devices and haven't encountered this problem. If I had to speculate, I would say you have a firmware issue.
Try this to confirm. Let the device boot up into the out of box image, and then let windows update patch the thing to completion and try again. Not all that comforting if indeed you have this problem... did you purchase them a few months ago
and are just now firing them up? Maybe the ones we have here have a later firmware.

CHKDSK fails on fresh install of Windows 7 x64 on mid-2009 MBP with SSD

There was an earlier post about this that has been archived prematurely that I will reproduce below. The main issue is a flaw in the Windows 7 x64 CHKDSK of the SSD drive in the mid-2009 MBP= 5,2. With fresh OSX installs, bootcamp 3.1, Windows 7 x64 all updates, the CHKDSK operation checks files at about 1 per second in stage 4 of 5, verifying file data.
Moderators: please leave this open until it is actually resolved.
Earlier posts:
Panajev
Posts: 4
From: ITALY
Registered: Oct 14, 2009
Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 2, 2009 6:45 AM
Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev
MacBook Pro (2009) Mac OS X (10.6.1) Windows 7 x64, Bootcamp 3.0, recent HDD update
nicegom
Posts: 6
Registered: Nov 12, 2009
Re: Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 12, 2009 1:40 AM in response to: Panajev
Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom
Macbook Air Windows Vista MBA of Mid 2009 with SSD

Windows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

Fresher

Similar Messages

Maybe you are looking for