Freshly recorded tracks do not line up with existing music

When I go to play back freshly recorded track(s) from any type of audio source, they play about a half second earlier than the rest of the existing tracks. I have to manually line them up. I used Logic flawlessly for about six months and then out of nowhere this started happening. Everything in my system has remained untouched since the day I set it up and I have not changed any relevant settings that I know of. Anyone else have this problem?

It happened to me too. And I found out that somehow in the preferences my recording delay was set to minus 1000.
You might check that
Oz

Similar Messages

The latest iMovie do not seem to be working properly. the photos and videos become distorted whenever i attach them to the templates. in one case (Blockbuster Trailer), the video skips thereby making it not in-synch with the music. what should i do?

the latest iMovie do not seem to work properly. the photos and videos become distorted when i attach them to the templates. in one case (Blockbuster Trailer), the video skips thereby making it not in synch with the music. what should i do?

bnjr86 wrote: There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
I wonder if another provider would really be much different? Read some of the other carrier forums - seems to be the same story everywhere.
I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

Track automation not in sync with playback

As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
Does anyone have any idea what this means?
I don't know if this helps, but here's the current configurations on the Automation menu:
Move automation with regions: never
snap offset: -5 ticks
ramp time: 200 ms
'Write' mode changes to: Touch
Write automatino for (everything is checked off except "solo")
Automation Quick Assic: [X] off

Hi,
Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
If you add plugin that require Delay conpensation on the Master 1-2.
Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
check it.
Thanks
G
g

Word label template does not line up with avery 5160 8160 paper, Mac Maverick

Word label template does not line up using avery 5150 or 8160 paper

These forums are for Apple products and the best place to ask about problems with MS stuff is in there newsgroups:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
When you don't see Post New Topic, it means you are not in a Forum but a Category page listing one or more Forums. You need then to enter a Forum by clicking on one. Then you will see the Post New Topic item at the top left.

Clips do not line up with playhead

Not only do all of a sudden none of my clips line up with the playhead, the last 3 seconds of a large majority have become still images. Most of this damage occured immediately after emptying the trash. Please help its due tomorrow!

I don't know how to correct your problem, but I know what caused it. It's a bug in iMovie's code for emptying trash, so you may lose your entire project. So, don't EVER empty iMovie's trash again.

Flash Will Not Line Up With Surrounding Graphics In Dreamweaver

Hello All:
I have been trying to get my Flash .swf file to line up with
the surrounding graphics in my page. I used the same sliced image
in the page and it lines up and for some reason when I put that
same slice into Flash, it becomes slightly skewed by a few pixels.
Here is what the page/problem looks like:
http://www.shannawise.com/images/FlashProb.jpg
Any suggestions?
NOTE: I'm using Dreamweaver MX

Tyring to get pixel perfect mixing Flash & others always
causes headaches. A
better approach may be to place you flash reference in a
layer that sits
over a background graphic
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"swnova22" <[email protected]> wrote in
message
news:eiqhaj$qcr$[email protected]..
> Hello All:
>
> I have been trying to get my Flash .swf file to line up
with the
> surrounding
> graphics in my page. I used the same sliced image in the
page and it
> lines up
> and for some reason when I put that same slice into
Flash, it becomes
> slightly
> skewed by a few pixels.
>
> Here is what the page/problem looks like:
>
http://www.shannawise.com/images/FlashProb.jpg
>
> Any suggestions?
> NOTE: I'm using Dreamweaver MX
>

Why no recording tracks and not enter the GPS coor...

It is interesting for sports (running, skiing, cycling, tracking)
I can not find the application running on a Nokia 2710 which can record my track, time, average speed and keep it on a flash card
Also interesting opportunity to send their GPS coordinates best with the help of SMS to my friends (which is important for security reasons). Also interesting is the input of GPS coordinates so that when you travel is not possible to install the application in an Internet cafe and noted the interest point on the map, as well as meet with their friends using GPS coordinates

That is probably because the 2710 is a low end model and uses the more basic S40 operating system. What you need is a Nokia S60 smartphone which support a raft applications which do exactly as you require including one called Sports Tracker.

Pixel grid does not line up with rulers

AICS 5.5 - I'm working in a doc with measurement set to pixels, showing the grid set to increments of 1 pixel. I reset the rulers by double-clicking on the origin. The grid does not align to the ruler pixels. It's about halfway between on the y axis and about 3/5 of the way off on the x axis. When I create objects with the origin and width/height set to even pixels (which makes them fall between the pixel grid lines) and save for web, the edges are antialiased.
How do I make the rulers and pixel grid register with each other? It seems odd this wouldn't be the default.

Aha - it turns out the artboards were not placed precisely on the pixel grid. Their origins were set between whole pixel values. The rulers went with the artboards, so their pixels didn't match the grid pixels.
Should be possible to just move the artboard and get everything lined up again.
Still - I would think the grid would readjust to the origin of whatever artboard you are currently working on, just as the rulers do. It not doing so is unexpected behavior.

Is it possible for the labels of new fields to not line up with already existing fields?

I am attempting to create a form where some of the labels are longer than others. Unfortunately, it appears that all labels have to match up exactly with each other. So, when I create a new field and extend the length of the label, it extends the length of the labels on all other fields as well. Please tell me there's a way to fix this. It seems elementary that users would need lables of varying lengths at times.

All fields on the first column share the same column width.
If you have a field to the right of another first (making it not the first element on the row) then it can have it own label width.
Gen

TableView column headers do not line up with rows

Right now I have a tableview with column headers that are wider than the cells in the rows of the table.
Anyone know what property or css style I need to adjust to give the cells a little more padding? I have not had any luck searching the web or these forums.
Edited by: astep on Feb 26, 2013 6:59 AM

Sorry it took me a little bit to strip things down and create the project. I used NetBeans to reproduce the effect and I tried to follow the same pattern in case it had a side effect. Sorry there is so much code here for such a simple demo. I'm going to play around with it some to see if removing some of the css eliminates the effect.
Sample.fxml
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import java.util.*?>
<?import javafx.scene.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<AnchorPane fx:id="ConstraintsAnchorPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefHeight="460.0" prefWidth="480.0" style="-fx-background-color:black" xmlns:fx="http://javafx.com/fxml" fx:controller="testtableview.SampleController">
<children>
    <TitledPane fx:id="ConstraintsTitlePane" alignment="CENTER" animated="false" collapsible="false" contentDisplay="CENTER" opacity="0.75" text="Constraints by Stream Class">
      <content>
        <TableView fx:id="constraintsTableView" prefHeight="445.0" prefWidth="480.0" />
      </content>
    </TitledPane>
</children>
</AnchorPane>stylesheet.css
.root {
-fx-base: rgb(50, 50, 50);
-fx-background: rgb(50, 50, 50);
-fx-control-inner-background: rgb(50, 50, 50);
.table-view {
-fx-table-cell-border-color:derive(-fx-base,+10%);
-fx-table-header-border-color:derive(-fx-base,+20%);
.text-field{
     -fx-prompt-text-fill: White;
.table-cell {
     -fx-border-color: black;
.table-cell:hover {
     -fx-background: DimGray;
     -fx-background-color: DimGray;
.table-cell:selected {
     -fx-background: DimGray;
     -fx-background-color: DimGray;
.table-row-cell {
     -fx-border-color: black;
     -fx-control-inner-background: black;
.table-row-cell:hover {
     -fx-background: DimGray;
     -fx-background-color: DimGray;
.table-row-cell:selected {
     -fx-background: DimGray;
     -fx-background-color: DimGray;
}TestTableView.java
package testtableview;
import javafx.application.Application;
import javafx.fxml.FXMLLoader;
import javafx.scene.Parent;
import javafx.scene.Scene;
import javafx.stage.Stage;
public class TestTableView extends Application {
    @Override
    public void start(Stage stage) throws Exception {
        Parent root = FXMLLoader.load(getClass().getResource("Sample.fxml"));
        Scene scene = new Scene(root);
        stage.setScene(scene);
        scene.getStylesheets().add(TestTableView.class.getResource("stylesheet.css").toExternalForm());
        stage.show();
    public static void main(String[] args) {
        launch(args);
}Model.java
package testtableview;
import javafx.beans.property.SimpleStringProperty;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
public class Model {
     private static Constraint temp = new Constraint();
     private static Model instance = null;
     private Model() {
     public static Model getInstance() {
          if (instance == null) {
               instance = new Model();
               constraintsList.add(temp);
          return instance;
     private static ObservableList<Constraint> constraintsList = FXCollections
               .observableArrayList();
     public ObservableList<Constraint> getConstraintsList() {
          return constraintsList;
     public static class Constraint {
          private SimpleStringProperty ColumnOne = null;
          private SimpleStringProperty ColumnTwo = null;
          private SimpleStringProperty ColumnThree = null;
          private SimpleStringProperty ColumnFour = null;
          private SimpleStringProperty ColumnFive = null;
          private SimpleStringProperty ColumnSix = null;
          private SimpleStringProperty ColumnSeven = null;
          public String getColumnOne() {
               return ColumnOne.get();
          public void setColumnOne(String input) {
               ColumnOne.set(input);
          public String getColumnTwo() {
               return ColumnTwo.get();
          public void setColumnTwo(String input) {
               ColumnTwo.set(input);
          public String getColumnThree() {
               return ColumnThree.get();
          public void setColumnThree(String input) {
               ColumnThree.set(input);
          public String getColumnFour() {
               return ColumnFour.get();
          public void setColumnFour(String input) {
               ColumnFour.set(input);
          public String getColumnFive() {
               return ColumnFive.get();
          public void setColumnFive(String input) {
               ColumnFive.set(input);
          public String getColumnSix() {
               return ColumnSix.get();
          public void setColumnSix(String input) {
               ColumnSix.set(input);
          public String getColumnSeven() {
               return ColumnSeven.get();
          public void setColumnSeven(String input) {
               ColumnSeven.set(input);
          public Constraint() {
               this.ColumnOne = new SimpleStringProperty("");
               this.ColumnTwo = new SimpleStringProperty("");
               this.ColumnThree = new SimpleStringProperty("");
               this.ColumnFour = new SimpleStringProperty("");
               this.ColumnFive = new SimpleStringProperty("");
               this.ColumnSix = new SimpleStringProperty("");
               this.ColumnSeven = new SimpleStringProperty("");
}ConstraintsTableViewModel.java
package testtableview;
import testtableview.Model.Constraint;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableView;
import javafx.scene.control.cell.PropertyValueFactory;
public class ConstraintsTableViewModel {
     private static TableView<Constraint> table = new TableView<Constraint>();
     private static ObservableList<TableColumn<Constraint, String>> columnList = FXCollections
               .observableArrayList();
     public static TableView<Constraint> setupView() {
          TableColumn<Constraint, String> ColumnOneCol = new TableColumn<Constraint, String>("Example Exam1");
          ColumnOneCol.setMinWidth(95.0);
          ColumnOneCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnOne"));
          columnList.add(ColumnOneCol);
          TableColumn<Constraint, String> ColumnTwoCol = new TableColumn<Constraint, String>("Example 2");
          ColumnTwoCol.setMinWidth(55.0);
          ColumnTwoCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnTwo"));
          columnList.add(ColumnTwoCol);
          TableColumn<Constraint, String> ColumnThreeCol = new TableColumn<Constraint, String>("Example3");
          ColumnThreeCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnThree"));
          ColumnThreeCol.setMinWidth(70);
          columnList.add(ColumnThreeCol);
          TableColumn<Constraint, String> ColumnFourCol = new TableColumn<Constraint, String>("Example4");
          ColumnFourCol.setMinWidth(60.0);
          ColumnFourCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnFour"));
          columnList.add(ColumnFourCol);
          TableColumn<Constraint, String> ColumnFiveCol = new TableColumn<Constraint, String>("Example5");
          ColumnFiveCol.setMinWidth(60.0);
          ColumnFiveCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnFive"));
          columnList.add(ColumnFiveCol);
          TableColumn<Constraint, String> ColumnSixCol = new TableColumn<Constraint, String>("Example6");
          ColumnSixCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnSix"));
          ColumnSixCol.setMinWidth(55);
          columnList.add(ColumnSixCol);
          TableColumn<Constraint, String> ColumnSevenCol = new TableColumn<Constraint, String>("Exam7");
          ColumnSevenCol.setCellValueFactory(new PropertyValueFactory<Constraint, String>("ColumnSeven"));
          ColumnSevenCol.setMinWidth(55);
          columnList.add(ColumnSevenCol);
          table.getColumns().addAll(columnList);
          return table;
}SampleController.java
package testtableview;
import testtableview.Model.Constraint;
import java.net.URL;
import java.util.ResourceBundle;
import javafx.fxml.FXML;
import javafx.fxml.Initializable;
import javafx.scene.control.TableView;
public class SampleController implements Initializable {
    @FXML
     private TableView<Constraint> constraintsTableView;
     private Model cm = null;
    @Override
    public void initialize(URL url, ResourceBundle rb) {
        cm = Model.getInstance();
     constraintsTableView.setItems(cm.getConstraintsList());
     constraintsTableView.getColumns().addAll(ConstraintsTableViewModel.setupView().getColumns());
}

When i print a check from quick books wireless, the print does not line up with the preprinted check

HP Officejet6500A Plus
I have printed check from Quick Brook Pro successfully using a USB cable. When I print checks
wireless the print is a half inch too low on the check. I loaded checks three time all with the same result

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

New 4s will not sync properly with existing 3gs data in itunes

I just purchased a new 4s to replace my old 3GS. When i connect my new 4s and trying to sync to i-tunes to apps from my 3gs snyc will not come into my 4s. I also have a i-pad2 that also snyc's to the same computer.
Should i un-install my itunes, re-install i-tunes on my PC, sync my old 3gs again and then try to sync my 4s again?

I have a problem with sorting playlists using iPhone 4/iOS 5 and iTunes 10.5. I use the field "comments" to sort my playlists, when sorting by the field "comments" ascending everything is OK, but when "sorting" by the field "comments" descending it keeps appearing ascending.
I also notice that the name of the playlists appear inverted between iTunes and iPhone.
I did not have this problem before, this a new issue with iTunes 10.5/iOS 5. Need help to fix these sorting issue problems in iTunes 10.5.

ITunes problems with existing Music Library

Can someone please advise why since downloading the latest iTunes SW I now have 83 songs (at least two of these songs were purchased directly from the Apple on-line store) in my PC Music Library that cannot be ported to my iPOD.
I have tried to Authorise my PC with the Apple Server at least a dozen times now and each time it say's it OK yet I still have the problem highlighted above.
I am getting so annoyed that Apple can stop me listening to MY OWN music that I am toying with idea of dummping my iPOD and moving to a more Customer friendly MP3 device.
Rgds, John...

I actually had about 5 on my Mac do the same - also purchased software from the Apple Store.
I managed to get them recognized properly by deleting them from the iTunes library (but not trashing the files) and then re-importing them in to iTunes, it seems to be related to the update process when 7.1 first loads.

Source code doesn't seem to line up with the compiled classes in ECLIPSE

I am trying to write a Tomcat servlet to parse an incoming message, however when I parse the message to get the parts out of it I get a a parse error that doesn't really tell me a lot.
I have downloaded the source code for the Java Mail API 1.3.2 and attached it to the jar file in Eclipse.
However when I debug the code and step through it I get two problems. 1) I get a warning that I can't see the local variables (not really a great problem). 2) The lines in the source code do not line up with where the stack says I am.
I have checked the dates on the various classes and the source of the API and they seem to line up.
I did try to recompile the classes just as an experiment but I am runing JDK_1.4.2_06 and the source seems to be set up for 1.5 and I have some missing classes. I can't switch to 1.5 because there are some other servlets running on this server that won't work on 1.5.
Can anyone give me a clue how I can at least get the the correct line number.
Thanks
Brynn

Has anyone any ideas on this please?

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input moniter".

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input monitor".

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

Freshly recorded tracks do not line up with existing music

Similar Messages

Maybe you are looking for