FRF-0063 RFC logon failed
Hi all
while inst'ion we are facing problem as RFC logon failed with mesg connect sapgateway failed.
we are installing distributed system ie database in host1 and sap instance on host 2
vinod
> Database was corrupted. but i manually created around 100 missing tables and 200 missing views . I worked hard for this.
Uff... I believe you.. but...
the database load does not only create the table structure but also fills them with data. That data is in binary compressed form in the files under the DATA directory on the export DVD.
> now i have to cope up with this "A:SY:002 Codepage 1100 not released"
It seems that your tables TCP0C and apparently also the 100 others are empty if you created just the table itself without filling in the data - and without that data the system will not run....
SQL> select count(*) from TCP0C;
COUNT(*)
2356
> between can you pls send me the complete table "T100" (in terms of its DDL statement) , as i think during the manual creation there is error in this table, which probably may be the cause of this error........
SQL> descr T100;
Name Null? Type
SPRSL NOT NULL VARCHAR2(3)
ARBGB NOT NULL VARCHAR2(60)
MSGNR NOT NULL VARCHAR2(9)
TEXT NOT NULL VARCHAR2(219)
but
SQL> select count(*) from T100;
COUNT(*)
4880220
Markus
Similar Messages
-
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway fa
We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR 2007-09-27 01:19:46
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host uapkb2dh, service 3329)
TIME Thu Sep 27 01:19:46 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8642
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 2
Regards,
Madhu.We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR 2007-09-27 01:19:46
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host uapkb2dh, service 3329)
TIME Thu Sep 27 01:19:46 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8642
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 2
Regards,
Madhu. -
RFC logon failed with message: Failed: Connect to SAP gateway failed
I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR 2006-09-16 01:13:02
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host hostSAP, service 3309)
TIME Sat Sep 16 01:13:02 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8528
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 4
Thanks,
Ramat the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter -
SAP Installation RFC LOGON FAILED- SQl ERROR ON PROGRAM SPAM (SAPMSSY1)
Dear Gurus,
during the SAP installation, i got the RFC logon failed error: SQL Error on program SPAM (SAPMSSY1)
I am pasting the disp_w0 file.....................
http://www.4shared.com/file/89058633/ac7a0547/_2__dev_w0.html
pls let me know the how to lovve this.
the basic error is like....
Generating ABAP/4 Program SAPMS380 .
A Source SAPMS380 Line 8.
A Error Code GEN_SOURCE_FORMAT.
A Module $Id: //bas/620/src/krn/gen/screads.c#7 $ SAP.
A Function sc_getstring Line 624.
A Error when reading program SAPMS380
Its showing this kinda error for a max of program like SAPMSSY1, SAPMSSY2, SAPMS380 and lots more which are clearly depicted in disp_w0 file.
what is the error??? is there any error in program SAPMSSY1??
if this is true pls let me know hot to solve this? where i can access this SAPMSSY1 ?? remember i can not use any T-code like SE36 as my installation is not finished.
Kindly have a detail look on the disp_w0 file.
AbhishekHI
can u tell me how 2 acces the ABAP program like SAPMSSY1 etc. without entering into SAP by T-code.
as i can not login right now. i want to do certain changes in these programs.
Abhishek -
Error in START_SHDI_FIRST... RFC logon fails
Hello All,
I cannot get past a step in the enhancement package 4 installation. The step is called: START_SHDI_FIRST. The error says to troubleshoot by looking at 2 logs, STARTSFI.LOG and DEVTRACE.log. extracted below.
The problem can be described this way. The step begins as the installer tries to start the shadow system. The first attempt stopped and I could see that the shadow was not started. I used the information in note 525677 to manually start the shadow and could verify that it was starting.
The screen says to retry until I can logon to the shadow. I am able to logon as user SAP* with password pass in client 000. I am not able to logon as myself and receive the message: Logon not possible (error in license check).
As SAP* I use the transaction SLICENSE, and could see that the maintenance certificate had expired. I loaded that certificate without an error.
I also see that the hardware key information is missing. SAP* is not allowed to update that information.
I believe that no other user will be able to logon as long as the license is an issue. The installer is trying to do a remote logon to verify that the system is up (my interpretation) .
I also see this information in the shadow system dev_W1 log.
M *** ERROR => ThMsGetHardwareId: ThOpcodeToMsg failed (1) [thxxmsg.c 3095]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 511]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1301]
M *** ERROR => likey_get_validity_dates: Error getting the hardware key. You might find some information in file "dev_ms" on the message server
M
M Thu Jul 29 15:18:28 2010
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17580]
M
M Modeinfo for User T8/M1
So, am I correct in seeing that the missing hardware key is the problem in the shadow system? Any ideas would be appreciated, otherwise I will clear the systems out and start over. Thanks.
Pat.
Below is the DEVTRACE (extract)
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "701"
sysno 15
sid TEH
systemid 324 (IBM iSeries with OS400)
relno 7010
patchlevel 0
patchno 69
intno 20020600
make: single threaded, ASCII, 64 bit, optimized
pid 103802
Thu Jul 29 14:54:58 2010
kernel runs with dp version 243(ext=110) (@(#) DPLIB-INT-VERSION-243)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 103802) [dpxxdisp.c 1287]
shared lib "dw_xml.so" version 69 successfully loaded
shared lib "dw_xtc.so" version 69 successfully loaded
shared lib "dw_stl.so" version 69 successfully loaded
shared lib "dw_gui.so" version 69 successfully loaded
shared lib "dw_mdm.so" version 69 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3615
MtxInit: 30000 0 0
Thu Jul 29 14:54:59 2010
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x7000000b0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Thu Jul 29 14:55:00 2010
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13279]
DpSetProcessPriority: Run priority for work process startup adjusted to 20
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jul 29 14:55:01 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0I=> NiPConnect: connect (79: Connection refused) [nixxi.cpp 2519]
ERROR => NiPConnect: SiConnect failed for hdl 2 / sock 9
(SI_ECONN_REFUSE/79; I4; ST; 10.127.0.100:3615) [nixxi.cpp 2519]
ERROR => MsIAttachEx: NiBufConnect to omni/3615 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1816]
Thu Jul 29 14:55:19 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jul 29 14:55:53 2010
***LOG Q0I=> NiPConnect: connect (79: Connection refused) [nixxi.cpp 2519]
ERROR => NiPConnect: SiConnect failed for hdl 3 / sock 10
(SI_ECONN_REFUSE/79; I4; ST; 10.127.0.100:3615) [nixxi.cpp 2519]
ERROR => MsIAttachEx: NiBufConnect to omni/3615 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
Thu Jul 29 14:56:34 2010
ERROR => MsISnd2: not_attached [msxxi.c 1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 5007]
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 01] Thu Jul 29 14:54:56 2010
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM iSeries with OS400)
relno 7010
patchlevel 0
patchno 63
intno 20020600
make: multithreaded, ASCII, 64 bit, optimized
pid 103801
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 103801) [msxxserv_mt. 1853]
[Thr 01] Thu Jul 29 14:54:57 2010
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3239]
[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 7
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:3615) [nixxi.cpp 3239]
[Thr 01] *** ERROR => MsSCommInit: NiBufListen(3615) (rc=NIESERV_USED) [msxxserv_mt. 10222]
[Thr 01] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv_mt. 1903]
[Thr 01] *** ERROR => main: MsSInit [msxxserv_mt. 5983]
[Thr 01] ***LOG Q02=> MsSHalt, MSStop (Msg Server 103801) [msxxserv_mt. 6030]
trc file: "dev_rd", trc level: 1, release: "701"
Thu Jul 29 14:55:00 2010
Shared memory semaphore administration area size = 10608
Thu Jul 29 14:55:06 2010
***LOG S00=> GwInitReader, gateway started ( 103807) [gwxxrd.c 1758]
systemid 324 (IBM iSeries with OS400)
relno 7010
patchlevel 0
patchno 68
intno 20020600
make: single threaded, ASCII, 64 bit, optimized
pid 103807
gateway runs with dp version 243(ext=110) (@(#) DPLIB-INT-VERSION-243)
gateway (version=701.2009.09.28)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Thu Jul 29 14:55:09 2010
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw15 (socket) to port 3315
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
MtxInit: -2 0 0
Thu Jul 29 14:55:47 2010
GwDpInit: attached to gw_adm at 700000080599e90
Thu Jul 29 14:55:48 2010
DpSetProcessPriority: Run priority for gwrd adjusted to 12
AN EXTRACT OF STARTSFI_LOG
Directory: /usr/sap/TEH/EHPI/abap/log
Name: STARTSFI.LOG
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20100729145436")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=<null>
4 ETQ399 auth_shadow_upgrade=<null>
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_db4_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399 default TPPARAM: DEFAULT.TPP
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_db4_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ399 Stopping shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
3 ETQ399 Executing command: 'startsap SID(TEH) INSTANCE(15) PROFILE('/usr/sap/TEH/EHPI/abap/TEH/SYS/profile/START_DVEBMGS15_omni')'.
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finallyHi,
You are getting this error because your hardware key in the license installed in slicense is wrong. Since upgrade tries to login with ddic user and if there is problem with license then only SAP* user is allowed.
Please perform below steps to resolve the problem. Check at OS level what is the hardware key, if the hardware key that is present in slicense is different then generate a permanent license of that hardware key and apply it in shadow instance. After that check whether you are able to login with user other than SAP*, if yes, then repeat the phase.
Please perform above steps and let us know the result.
Thanks
Sunny -
Hello
RFC user logon failed.
Can anybody help me out for R3077
Its occuring regularly
Thanks And Regards
Akash GuptaHello akash,
Possible reasons :-
1> user must be of type "System" in logon data.
2> must be unicode "in RFC"
Rest you could follow this link :-
/thread/250014 [original link is broken]
Please do write to me at [email protected] in case of more queries.
Thank you.
Regards,
Manomeet
Award points if helpful ** -
Logon fail when creating Connection in Crystal Reports SP3
Greetings,
I am working on an issue where we have installed the SAP GUI 7.10, Crystal reports 2008 SP3, and SAP IK FP 3.1.
We are testing the access to ECC. We have setup the server in the GUI and can successfully logon to the server in the GUI. We open Crystal Reports, select File -> New -> Standard Report, scroll down to SAP Table, Cluster, or Function, and the SAP System Logon window pops up.
Select the ECC system, click Next, and input the logon info for the system. Click Next and do not check the box for generating a RFC trace file, then click finish.
This results in a new window popping up. The title is Crystal Reports, and the contents of the window are as follows...
Logon failed.
Details: <bunch of Chinese characters>.<more Chinese characters>
We are using the language setting of EN on the SAP server, and in the GUI configuration. Not sure why we are getting Chinese (we have verified it as Chinese with a person here who can read some Chinese. he says that the first part is "something about server not valid")
We asked a user who does have a working install using CR 2K8 SP2 and SAP IK SP2 to try the login and he had the same results on this system.
We can use the same SAP account to login to InfoView without an issue.
Any suggestions?i had the same problem.
it has something to do with the sap gui logon settings.
1. go to your SAP logon ECC-properties (start sap-logon; right-click on your ecc connection)
2. go to the Codepage-Tab
3. set Language to default (standard)
then it should work.
br
thomas -
Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System
Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636< RfcException: [null]
message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR hostname 'cpe1601' unknown
TIME Mon Jul 14 16:20:25 2014
RELEASE 740
COMPONENT NI (network interface)
VERSION 40
RC -2
MODULE /bas/740_REL/src/base/ni/nixxhl.cpp
LINE 193
DETAIL NiHLGetNodeAddr: hostname cached as unknown
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
E16 System:
SID: E16
Client: 800
System Number: 01
Server: cpe1601
Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
User: ********
Password: ********
SAProuter String:
If you don't plan to use SAPRouter at your end,
/H/155.56.49.28/H/ -
Crystal report- Connect from SAP gateway to RFC server failed
Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
ChetanHi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan -
Connect from SAP gateway to RFC server failed
Good day and a happy new year to you all!
I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
>>>>>Start<<<<<<<<<<
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
LOCATION SAP-Gateway on host bwsys / sapgw02
ERROR timeout during allocate
TIME Sat Dec 31 13:16:19 2005
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1785
DETAIL no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
COUNTER 2
>>>>>>>>>END<<<<<<<<<<<<
I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
What could be wrong or missing in my configuration?
Regards,
Joao.hi Joao,
check if oss note 447882 relevant
you may ask basis for help
Symptom
You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
Other terms
SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
Reason and Prerequisites
The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
Solution
Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc. -
Error: Connect from SAP gateway to RFC Server failed
Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM -
Unable to connect to SAP gateway to RFC server failed(hostname unknow)
Hi All,
I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
1.Selecting Import Adaptive RFC Model
2.Entering Model name,package,default logical system names
3.Selecting the single server option and giving the details of the SAP R/3 server.
When I try to connect it gives me the following error :
-Connect from SAP gateway to RFC server failed.
Also it mentions :
<b>"ERROR hostname 'sapR3' unknown "</b>
Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
Further I am able to establish a telnet session using the same hostname in command prompt.
I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
Regards,
Kshitij AgrawalHi,
Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
1) Open the SAP LogOn.
2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
3) Look for the value entered in the field "Application Server" in the properties window.
Hope this helps. -
"Program terminated in remote system NONE: Logon failed" when adding a new table
Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
ChristianFirst thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
One monitoring job (master job)
One master controller job
At least one data load job
One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
The Number of required data transfer jobs ,
plus one background work process for Central Master (Monitoring) Job (only one per system!),
plus one background work process for Master Controller Job,
plus 3-5 additional empty background work processes (recommended per configuration),
plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian -
Getting Logon Failed error connecting to SAP R/3 with Crystal
I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin ScheelerHi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support
Maybe you are looking for
-
How do I delete an iCloud email address that was created under my Apple ID?
I have an Apple ID that is used mostly for iTunes. My son has an iPod Touch and wanted to create an iCloud email address to use on his iPod. We created an iCloud email address through my Apple ID, not realizing that now, every time he sends an emai
-
Hi I am new to CO area. I have a requirement. I have to monitor the maintance costs per 46 vehicles I have in my company individually. I have created these vehicles each as a Statistical Key figure. I am posting the maintenance expense to a Cost
-
Error on export to PDF, working correctly in viewer.
I have been wrestling with an error for a while now and would appreciate any insights offered here to help me correct this issue and move on with my project. The situation is this, I have a .net application which includes eight different Crystal Repo
-
Windows update always says that there are no new updates (for months now - obviously it's not true). When I try running manually an update file, it almost always gets stuck on "Searching for updates on this computer". Also, usually when I run a prog
-
Keynote crashes and then corrupts the file
I hoping somebody can help --- this is driving me crazy. When editing an existing document in Keynote 9.3 at some point it crashes and I have to force quit. When I restart my document is corrupted (the graphics thumbnails appear, but the graphisc on