Fritz box does not set Store.e USB3.0 1TB 3,5" into sleep mode

Hello
I like to use the HDD on a Fritz.box als USB-Storage.
The box allows to switch the HDD into sleep mode.
But the HDD does not want to do this.
How (and where) I can change the settings?
Thank you
Greetings from germany

Hello JoeLouis
+Why are you so sure that there must be an function or setting?+
please google for *"external hdd spin down"*
You see, that there are many people who are talking about this.
Some like to stop spin down, some like to shorten the time and some like to use it (like me)
+So either this HDD is not compatible for such usage or its does not provide such functionality.+
that was my question: i thought in toshiba support forum s.o. could tell me.
+In your case I would recommend testing another HDD maybe an 2.5 HDD which needs only an USB cable without additionally power cable.+
I know. First bought a Stor.e 2TB 2,5" for this, but the usb port of the fritzbox does not have enough power for it. So I tried touse the 3,5 " Version.
+A colleague told me that exactly this HDD could do so.+
He will bring it to me, maybe we change the hausing ( he dont like the spin down option )
I try to get some Info somewhere else.
Greetigs from germay
UDEM

Similar Messages

  • Getting Error message ""This set top box does not match the account settings"

    Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards,  Rick

    your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
    A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
    Your choice 4 hour appointment window, or time on phone , or chat.
    If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
    Set aspect ratio MENU, OPTIONS, etc.
    should take about 20 minutes per receiver.

  • My search box does not display suggestions even though it is set to (it displays past searches, but not suggestions). I have looked at the FAQs and everything is set for it to show suggestions.

    My search box does not show suggestions although it is set to show suggestions.

    MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly.  I would think that someone would be intelligent enough to do that before buying a new device, but......
    iMessage could be an activation issue or a network issue.
    Have you tried Settings > General > Reset > Reset Network Settings?
    Does iMessage work consistently on Wi-Fi?

  • Save As dialog box does not gain focus (bring to foreground) with Windows 7?

    Hello,
    I've got several users with Microsoft Windows 7 (64bit) and Adobe Acrobat 9 Standard (OEM) with the same problem.  When you go to Print to your PDF Printer, the Save As... dialog box does not come to the foreground and gain focus.  Most often it just sits in the taskbar blinking to get their attention.
    However the users get frustrated and often don't realize the Save As box popped up at all.  They did not have this problem with Windows XP.
    I actually can replicate the problem on my own PC.
    Any workarounds for this behaviour?
    Thanks,
    -Tim

    This appears to be a Windows 7 focus issue.
    You can back up your registry and try the fix below, it worked for me.
    Fix number 1
    1. Open Start >> Run and type “regedit” (without quotes)
    2. Navigate to the following path:
    [HKEY_CURRENT_USER\Control Panel\Desktop]
    3. Right Click on the empty space and create a new DWORD value, or modify the existing value named ‘ForegroundLockTimeout’, set or modify the value to 0. (this value will cause the application to take the focus instantly.)
    4. That’s it Done, exit registry and restart windows for changes to come into effect.

  • On demand error - box does not have enough credit

    For the duration of the day I cannot watch free on demand programs. For example, when I attempt to play an NBC show it states that that my box does not have enough credit and to call customer service. I am calling the The number given and entering the code 8362 as given in the error message. The line rings and then disconnects. I tried calling the customer svc nbr specified in the customer svc screen from the menu option. It rings and then just disconnects. Very disappointed that a company like Verizon does not have the methods or technology to accept inbound calls to their customer service centers. I am posting here in hopes of obtaining some support from verizon since I cannot obtain support by calling.

    NoShoreMA Contributor said
    "This happened to me earlier. Go to Menu and select Customer Support. Select In Home Agent. I tried to reboot (only gave me different error code). Select Set Top Box Auto Correct. This seemed to have done the trick. What do you know.....I am watching the movie that shut down when this all started. Good Luck!"
    worked for me hope it works for you

  • Required = true, but Javascript alert boxes Does Not fire ?

    Hi,
    On my ADF Form (af:form), I have set my attribute : required = true on the adf faces page. (on the entity object, mandatory = true)
    But when I press Submit, I do not get any Javascript alert boxes fired, instead, I just see server side validation error.
    Why the Javascript alert boxes does not get fired ?
    Where is the setting ?
    Thank you for your help,
    xtanto

    Hi Frank,
    I use JDev 10.1.3.1 and it does not work.
    Yes , the required field similar to #{bindings.ManagerId.mandatory}
    I even try to change it to 'true', still no Java script alert, just the server side error.
    What is the possibility ?
    Thank you,
    xtanto

  • I can not print web pages,print box does not appear . I can print web pages using IE

    Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
    Printer: Brothers HL-5140
    Thank you,
    Syd

    First of all, update Firefox to 3.6.17 via Help | Check For Updates.
    There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
    To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
    To revert to Google as your preferred search engine, please do the following.
    * In the location bar, type '''about:config''' and hit Enter.
    * In the filter at the top, type: '''keyword.URL'''
    * Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''To reset your home page, do the following'''.
    * Go to the site you want to set as your homepage.
    * Go to '''Tools '''| '''Options '''| '''General'''
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
    After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
    Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
    Update via http://get.adobe.com/flashplayer/
    Printing issues might be fixed by installing Java via http://www.java.com/en/
    But if the problem persists, please post again.

  • HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).  My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple

    My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).
    My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple Menu.  The “Settings” does however displays the General menu allowing me to see:
    Apple software:          7.1 (7003)
    Apple TV:                   Model No. A1464, Part No. MD199B/A
    Signal Strength shows 5 circles.
    It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video.  I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2.  Can you help please?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • I have an iphone 4 with the latest updates, but icloud does not show store option. My pics and music are not on the cloud, how do I upload them from my phone to the cloud? I just paid $20 thinking i needed more storage, but that did nothing. help

    I have an Iphone 4 with OS 5.1.1 and it does not show store or music under my icloud tab in the phone. Also, my music and photos don't show on my icloud?
    My contacts show and find my iphone....on the icloud. I just paid $20 thinking more storage would help, but it didn't. How can i cancel that and get a refund?
    Where are is my music on the cloud? How do I upload my music to it? If I lose my phone, it looks like there is no where to go to retrieve my music.
    And itunes won't let me sync my music to my computer. It is all music that I've purchased on itunes.
    Thanks!

    You need to subscribe to iTunes Match to store your music on iCloud:
    http://www.apple.com/itunes/itunes-match/
    To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
    Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

  • Text box does not display the date??

    I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
    When the page is loaded the text box does not show the date.
    I try to save the date in the text box as
    <% String date1=request.getParameter("invoiceDate");
    <input type="hidden" name="date1" value="<%=date1 %>">
    <%>
    The value is saved in this hidden variable..
    Plz help me what to do next
    Thanks

    Its a hidden field and that's why it isnt displayed.
    Use
    <input type="text" name="date1" value="<%=date1 %>"> ram.

  • Mapquest sign in box does not appear in Firefox but does in Internet Explorer. Why? Have disabled add ons but no luck.

    The sign in box does not show up on Mapquest when I use Firefox. If I use Internet Explorer, the sign in box appears. I disabled the Firefox add-ons thinking there might be a conflict but no luck. Mapquest support is at a dead end, too, especially with it working in IE but not in Firefox. Suggestions?

    Can you post a link to that login page or is this a pop-up window?

  • MacOSX (10.9): Print dialogue box does not appear when printing PDF's

    Hi there,
    I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
    Environment Details:
    Device type: MacBook Pro
    OSX: 10.9 (Mavericks)
    Adobe Reader version: 11.0.06
    Details:
    After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
    - Only 1 MacBook Pro affected
    - The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
    - Multiple restarts performed
    - Attempted to download older versions with no success
    - Attempted multiple uninstall/reinstalls
    - Reset the CUPS printing system multiple times
    - Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
    - Occurs for multiple PDF's from various sources
      -> Online source
      -> Converted from Word
    Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
    An unimplemented or obsolete function was called
    Any help would be greatly appreciated.
    Cheers!

    Hi there,
    Just bumping this thread for more visibility.
    If anyone has any thoughts, I'd more than appreciate your advice!
    Cheers!

  • Yahoo e-mail page is distorted and hard to read (once in a while its OK) - box does not extend to the right side making e-mail info hard to read. Info displayed in the reading panel is OK.

    When I open the Yahoo email page, the box does not extend across the screen and the script is distorted making it hard to read the source, subject etc. The reading panel info reads OK. All other pages of Yahoo are not distorted.

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

  • "save as" pop up box does not allow me to save the document.

    Hello ,
    "save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
    Thanks!

    Found this solution:
    The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files":

  • Filechooser box does not appear

    I have made an installer using izpack. Somewhere in the installation process a user are to press a button and locate a directory using an izpack filechoose.
    This has been working fine for some time now but all the sudden this filechooser box does not appear and the path needs to be manually typed.
    Any ideas on what might prevent a filechooser box from appearing?

    When I run the same .jar file on another machine it works fine. So I don't think the error is related to the izpack installer. I have tried reinstalling the java jdk but that does not help. Any ideas on what "outside" izpack that might cause this?

Maybe you are looking for