Fritz.Nas Upload

Using the webbrowser it is not possible to upload a file to fritznas. Putting the file via drag and drop to the upload area only opens the file in Safari.

Download speed will be always slow then your actual connection speed...Download speed can never be 54MBPS if your connection speed is 54MBPS...

Similar Messages

OSX Lion connection proble on NAS

2TB LaCie ETHERNET DISK XP Embedded EK
Hi
I just installed OSX Lion 10.7.1
First thing I see. I can't connect anymore to my NAS
It's a Lacie 2TB Ethernet with embedded XP
I saw on the net that it is a worldwide problem
I saw several solutions
I tried them, none works.
I took contact with Lacie, their answer.
We don't support that model anymore.
I didn't find any solution for this model
Can somebody help me out.
Thanks in advance

Hi!
Sorry for kicking this,
but I have a permanent solution for this problem, it requires no changes at the client side, which I usually prefer.
You can actually log in to the Lacie XP Embedded system and upgrade the ExtremeZ-IP software it uses, it has a 25 user OEM version you can upgrade. Just make sure you have the latest installer ( ExtremeZ-IP 8.0.2x195 ) ready on the NAS (upload via FTP) to install.
The trick is to log in with Microsoft Remote Desktop as an administrator and visit the "Firewall" section. From here you can go to the exception screen and click "Add Program" From here you can browse to "Desktop" and right click on "My Computer" and choose "Open" from here you can launch any installer and program you wish to install.
So you need to upgrade the ExtremeZ-IP software and change the Bonjour Service to C:\Program Files\Group Logic\ExtremeZ-IP\Bonjour\mDNSResponder.exe after installation. Reboot and everything should work just fine, even with OSX Lion / Mountain Lion.
For safety, please make sure to backup the C:\Program Files\Group Logic folder and clear logs.
Good luck!

Accessing a USB drive attached to ISP gateway which is behind an Airport Express acting as a router

I have a Fritzbox 7362 SL provided to me by my (German) ISP, my German is not very good, so I am struggling with the documentation for the device.
A useful feature is its ability to accept USB drives or thumbdrives which is marketed as a 'NAS' drive. So far I am able to access the attached thumb drive through the browser interface, but I am having trouble figuring out how to transfer files on to the thumb drive without removing it from the gateway and plugging it in to my MBP - the WiFi on the gateway is switched off and an Airport Express is the only wireless router in operation at the moment.
The thumb drive shows in Finder, but clicking on it brings up the PC icon which normally shows for non Macs on the same network, then it tries to connect, but the only message that comes back is 'connection failed'. Clicking on the 'Connect As' button brings up the 'Guest' or 'Registered User' options, neither of which work. What Name / Password do I need to connect? The server is called 'fritz-nas' At present my name as it appears on my Mac user account shows up in the Name field.

All that I can provide is what has worked for me for years.
The Time Capsule is setup as the router for the network, connected to a simple Zoom 5431J cable modem.
Static Internet IP connection from the cable provider is 12.34.567.89
By default, the Time Capsule is at 10.0.1.1 on the local network
Port Mapping setup for the Time Capsule is......
Public UDP Port 8884
Public TCP Ports 8884
Private IP 10.0.1.1
Private UDP 548
Private TCP 548
The hard drive on the Time Capsule is accessed from a remote location at afp://12.34.567.89:8884
The AirPort Extreme is connected by Ethernet to the Time Capsule and is it setup to operate in Bridge Mode
The AirPort Extreme always receives a reserved local IP address of 10.0.1.2 from the Time Capsule
The Port Mapping setup (on the Time Capsule) looks like this for the AirPort Extreme.......
Public UDP Port 8888
Public TCP Port 8888
Private IP 10.0.1.2
Private UDP 548
Private TCP 548
The USB hard drive connected to the AirPort Extreme is accessed from a remote location at afp://12.34.567.89:8888
If you are still having difficulty, I would delete all of Port Mapping settings on the Time Capsule and Update the Time Capsule. Then, go back and setup the Port Mapping for the Time Capsule, check that to make sure that it is working, then setup the Port Mapping settings on the Time Capsule for the AirPort Extreme.

How can I store my iTunes library on an NAS (Fritz Box)?

How can I store my iTunes library on an NAS (Fritz Box)?

1. Drag the library to the external drive, launch iTunes with the Option key held down, click on Choose Library, and point it there.
2. Get a second. Having the backups on the same drive as the original data won't help when that drive fails.
(66929)

HI - I want to store my itunes mediathek on a network harddrive. path to harddrive is \\FRITZ!NAS\RouterFP\WD-10EADSExternal-01\itunes. trying to import a CD returns an error (Code -39). Any idea what the issue may be ? TIA

HI,
i would like to store my mediathek on a shared harddisk within a home network. external HD is connected to a Router and accessible under
path to harddrive is \\FRITZ!NAS\RouterFP\WD-10EADSExternal-01\itunes. i have tried to access HD from the operating system which works well. Any ideas out there ?
TIA
stefan

x0SiN0x:
Welcome to Apple Discussions..
My first suggestion is to Repair Disk. Here's how:
Insert Installer disk and Restart, holding down the "C" key.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back and let me know how that goes.
Here are a few links that may help you to identify the issues:
Resolving Disk, Permission, and Cache Corruption
Tuning Mac OS X Performance
Mac OS X System Maintenance
Please don't hesitate to post back should you have further questions or comments, or with update.
Good luck.
cornelius

Very slow upload speed

Hi would like to know how I can get better upload speed on infinity. Current Download 21680 upload 550kbts/s
This has ever since I got infinity installed. Earlier on this year I got bt to check the line the answer from the engineer was that a section of the line is old aluminium cable, will bt replace this to copper or will they just let it be as this must be given more than myself poor upload speeds what if any thing can I do about this.
Was thinking of moving provider but as this would still run on the SHORT portion of aluminium cable I would have the same problem. Or would another provider request bt upgrade this section of cable.

This is the info from router it is not the home hub
HomeCloud
Logged in | FRITZ!Box | FRITZ!NAS | MyFRITZ! |
Overview
Internet
Online Monitor
Account Information
Filters
Permit Access
MyFRITZ!
DSL Information
Telephony
Home Network
WLAN
DECT
System
DSL Information
Overview
DSL
Spectrum
Statistics
Line Settings
Feedback
Negotiated connection properties
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 25000 800
Min. DSLAM throughput kbit/s 12496 128
Attainable data rate kbit/s 21680 570
Current throughput kbit/s 21608 552
Seamless rate adaptation off off
Latency fast fast
Impulse Noise Protection 0 0
G.inp off off
Signal-to-noise ratio dB 7 6
Bitswap on off
Line attenuation dB 26 5
Profile 17a
G.Vector off off
Carrier record A43 A43
Error counter
Seconds With Not Remediable Errors (CRC)
Errors (ES) Many
Errors (SES) per
Minute Last
15 Minutes
FRITZ!Box 193 0 0.4 4
Central exchange 9 0 0.01 0
Refresh Help
View: Advanced | Contents | Manual | avm.de

Unable to Stream Video on Demand files from NAS on latest version of AMS 5.0.3

Hi,
I was hoping that someone could assist me.
Our organisation has recently purchased Adobe Media Server Standard to deploy to two Windows 2008 R2 servers (core edition) to stream flash content (video on demand only) which is resident on NAS storage.
I have considerable difficultly in streaming content from NAS and from the literature I have read and the configuration I have done it should be possible.
The steps I have taken to attempt to get this to work are as follows:
Installation
- Installed AMS 5.0.1 on both servers using the default TCP ports and Apache was not installed as part of the install
- Both AMS instances upgraded to the latest release AMS 5.0.3
- Windows Firewall on the servers disabled (we use hardware firewalls) and TCP connectivity verified by using telnet to connect these servers on 1935 and 80
Initial Configuration
- As we only will be using video on demand I removed the live, livepkgr and multicast applications from the /applications folder. Vod is the only application remaining
- Using the videoplayer in the /samples/videoplayer we were successfully able to view the sample streams
Configuration to stream from NAS
- I modified the VOD_DIR in the ams.ini file in the /conf folder to reflect the NAS location (\\{nas FQDN\sharename}
- Our NAS share has NTFS permissions applied and our AMS servers are joined to Active Directory. I created an AD account that had membership of the group that had read rights to the NAS share.
- I then reconfigured the AMS windows service to Log on with the AD account (as per the install guide: http://help.adobe.com/en_US/adobemediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2925 e64-7fc7.2.3.html)
Issues Experienced
- Whenever I change the AMS windows service to use an AD user (and not the Local System account), the service will run for only a short time (time often varies) before the service stops. In the application event log the AMS (Core) component
logs the error "Failed to create process mutex".
- The issue experienced is similar to a previous post by an FMS 3.5 user (http://forums.adobe.com/thread/650522)
Troubleshooting:
- To rule out a permission issue, I confirmed that the AD user created could actually read from the NAS share
- I also gave the AD user read/write permission to the AMS install directory. I have also added the AD user to the local admin group. Still get the "Failed to create process mutex" error and service stops.
- We created a test share on the NAS that had no restrictions set (everyone full control) and reconfigured the ams.ini to use this. The service still stops.
- I reconfigured the ams.ini back to the default path (local storage) and attempted to start the AMS windows service with the AD account. The service still stops which seems to confirm the issue is not related to the NAS storage/permissions itself
- I gave the servers machine account from AD read/write access to the NAS shares (both test and live shares) and reconfigured the AMS windows service to use the local system account. Whilst the windows service remains stable and runs,
streams do not work
- I have been testing using rtmpdump and a player (http://osmf.org/configurator/fmp/):
- With the player the player connects and the stream remains in a "buffering state"
- With rtmpdump we get the "NetStream.Play.StreamNotFound" error. The stream definately exists. I have the rtmpdump log file but not sure how to upload it to this post
- The above issues/behaviour is experienced from both servers
Workaround:
- The only way I can get NAS streaming to work is to map the NAS share as a network drive from the server
- On the same server I then stopped the AMS windows service and started AMS as a console application (ams.ini is pointing to the NAS location)
- Streaming then works however this is not an exceptable workaround for a enterprise server that will be streaming content to the Internet. Having to rely on mapped network drives and console applications is certainly far from ideal.
Should it be possible to have the windows service run under the context of another account and to be able to stream without then having to have a mapped network drive?
Any assistance would be greatly appreciated
Thanks
Jason
UPDATE: to add further, I have just tested this on a Windows Server 2008 R2 Standard edition with the full UI and I get the exact behaviour/problems as documented above. The issue I am experiencing is not related to the fact I am using the core edition of Windows.

HI,
I have managed to address my issue and get this working!
When reconfiguring the AMS service to use the AD account you MUST also reconfigure the Adobe Media Administration Server to use the AD account.
This mismatch in accounts was causing the mutex issue and stopping the AMS account from running. Read access to the NAS and log on as a service right on the AMS server
was all that required for the stream from NAS to work.
If any Adobe staff read this thread - can I please request that the section on "Mapping Directories to Network Drives" in the "Configuring the Content Storage" section of the help guide (http://help.adobe.com/en_US/adobemediaserver/configadmin/adobemediaserver_5.0.3_config_adm in.pdf) be revised to be clearer as to what windows services need to be reconfigured
to support AD authentication
Thanks
Jason

When using a NAS with iTunes, will iTunes ask if a file should be deleted and then delete it from the NAS?

I had some bad luck moving to a NAS earlier this year. I'm trying again now after getting a new hard drive.
One thing I encountered previously was that it seemed like if I deleted say a podcast or TV show manually that I had watched, I did not get the usual confirmation asking if I wished to delete the file. More importantly, the file did not seem to delete from the NAS. I had to go through twice the work to remove it from itunes and then again from the NAS.
Is that how it is supposed to work if the Itunes media is on a NAS? Not sure if it was some sort of issue with my previous problems or if that is how it works with itunes and a NAS device?
Thanks.

Hey elenaaa21,
It all depends on what your setup is. So if you have upgraded to iCloud Photo Library, then any changes that are made will be reflected on all devices that have that turned on. You delete a photo on your iPhone, then on iCloud.com you will not see it because it has been deleted. If you are not using iCloud Photo Library, then you will need to delete the photo on all devices to where it shows up. Keep in mind that if this was done very quickly, then it may not have been uploaded to your My Photo Stream as you need to make sure that you are on Wi-Fi and the Camera app be completely closed out. Take a look at the article below for more details and let me know if this clears this up or need further assistance.
iCloud Photo Library FAQ
https://support.apple.com/en-us/HT204264
My Photo Stream FAQ
https://support.apple.com/en-us/HT201317
Take care,
-Norm G.

In my HOME-WLAN there is a NAS attached with lots of music on it. How can I play that music on my iPhone ?

1) I installed a NAS to my router (Fritz!Box) and moved some music over there (-> "M:").
2) M: can be reached well from other PCs which I attached already both via LAN ans WLAN.
3) my iPhone is attached to the very same WLAN
4) is there a way to "connect" to that network-drive and listen to the music on M: ???

Luckily I found a solution myself :
there's an APP "Files Connect" available in APP store which detects my NAS, lets me log on there and shows the drives that where my music is on. Files can be added to a playlist and are played as I want it ...

How to set up port forwarding on extreme with NAS

I've purchased a NAS (Synology DS211j with 2 caviar HD) over a month ago. Setting up the NAS for wireless connection locally was easy. I've been trying for 3 weeks on how to set-up port forwarding on my airport extreme base. I''ve researched and read countless threads on port forwarding and still cannot grasp the concept and the step by step provided. I need somebody that's patient enough to hand hold and guide me through this frustrating problem.
Equipment:
Comcast cable modem connected into Airport Extreme Base
Synology DS211j connected to Airport Extreme Base
Problem:
Cannot connect to my DiskStation via internet from wherever
confused whether to use FTP or Personal file sharing or whatever is the most suitable for my needs
Just need to access files on my DiskStation view/upload/download from wherever I'm at, whether on PC or Macbook Pro
Thanks in advance!
Marcus

Here are the basic steps to configure your NAS for port mapping:
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the host server>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

ITunes Match on a NAS?

How do fellow Apple'ers,
Quick spec on what's being used at the minute:
-rMBP
-iPad Mini
-iPhone 4S
-Time Capsule
-ATV (don't know what gen you call it - the new one..)
-iTunes Match
Prospectively looking to add:
-A NAS
-Mac Pro on release (for no other reason than it will complete my life..)
So, what I'm looking to do;
-Have a NAS set as the main and only iTunes library (most likely set up as a 3rd party iTunes Server)
-Have iTunes Match see this iTunes Library (on the NAS), and upload for all devices to use in iTunes Match mode (including the rMBP)
Most other threads I've found basically say "point your rMBP to the NAS for the iTunes Server and it'll work" - which isn't what I want. I've had a play with this, but then the rMBP is seen as the 'host' for iTunes Match - therefore can't stream/cache songs - ie, when out of internet range, it can't connect to the NAS so hasn't any music cached on it.
Hope this makes sense to someone, and they can advise?
Much love,
Ash x

Presumably the Mac Pro will be resident on the network alongside the NAS?
iTunes Match requires a computer based iTunes library to act as the conduit to the Cloud.
The NAS is effectively a 'local Cloud', however it is unlikely that the NAS can host iTunes.
So the options are:
1. Use the Mac Pro iTunes library and the main conduit to the Cloud - periodically manually backup to the NAS, so the NAS can provide a local iTunes service; or
2. Configure the Mac Pro to always use NAS as the location of its iTunes library - a neat solution provided the NAS is always on.
In both options, once iTunes Match has completed its 'matching' / 'upload' the iDevices and rMBP can use Match as there source. A NAS with decent RAID configuration makes a superb local backup option.

Error while uploading commodity codes in VEU4

Hello
I am trying to upload around 200 commodity codes for MM through VEU4. Initially i got the following error
Maintain the length of the comm.code / import code no. in table T609S for the country PK
Message no. EI025
But then I configured length for the country PK in SPRO -> MM ->Purchasing -> Foreign Trade/Customs -> Basic Data for foreign trade - > Length of commodity code.
Country: PK
Arrival/ Dispatch:1
Length: 9
But now when i execute tcode VEU4 i again get the error
But then I configured length for the country PK in SPRO -> MM ->Purchasing -> Foreign Trade/Customs -> Basic Data for foreign trade - > Length of commodity code.
I am entering the following information in VEU4
Country: PK
Source File: comm.txt
Source Drive: C
Initial item goods no: 1
Final item goods no: 9
Initial item goods text: 11
Final item goods text:: 30
Kindly please help!
- Regards
Sahar Khalid

Syed Nasir explained it well :
Further there is a blue info button in the selection screen, which gives you instructions too.
Edited by: Jürgen L. on May 13, 2011 5:13 PM

Windows 8.1 problem saving word 365 document by using Netdrive in NAS Synology

Hi Everyone,
I have Problem with Windows 8.1 to open or save word 365 document by using Netdrive in NAS Synology.
Please I Need your help asap.

Hi,
In regarding of the issue, we need more information.
Do you meaning that you can't open the Word 2013 file in NAS Synology through network?
Does only one Word file occur the issue?
Does the Other file encounter the issue (Such as Excel file ,TXT file, Images)?
Do you download the Word file to local and check if it can be opened or saved?
Do you get some error message or error code?
Please try the following steps to check they are helpful:
Create a new Word file and open it in local disk to make sure Word 2013 work fine in local.
Check the network connection.
Check the account permission and security settings.
If the issue still exists, please give me more information, and upload the event log to do further research.
Regards,
George Zhao
TechNet Community Support

Firefox 5.0.1 will not allow me to upload any files. I receive an error message, though I know the files are vaild.

Firefox 5.0.1 for Mac OS 10.6.8 is not allowing me to upload attachments. I get a pink band with the message "Files with errors will not be uploaded". When I click on the View Error link, it tells me "This file couldn't be added because it appears to be empty (0 bytes). " These are valid jpeg files that I have attached many times before, so I know there is no problem with the file. Also, Firefox has recently given me an error message about restarting in 32-bit mode to accommodate a plug-in. I have ticked the '32-bit" option in the Get Info window of the Firefox application.

I have been unable to drag and drop large files, even onto the Desktop, let alone onto my NAS - I get the dragged files freezing in the middle of the screen or I get the 'unable to copy / file in use' error.
Talking to Apple Support, they had me set up a new User, and then within that new account, the trouble went away. This pointed to the StartUp items being run in the original troublesome account,
I have deleted all of my 3rd Party programs and then installed them one by one until the problem came back, and in my case (Macbook Air 5,2 running 10.10.3 Yosemite) I found it was DropBox causing the conflict. I have DropBox running in the Menu Bar (top of screen) and disabling sync (bottom left corner) stopped the file copy problem. Try disabling DropBox sync is file copying is failing?

How to install daap on NAS?

Hi everyone, I have a doubt:
I own this NAS: http://www.dealextreme.com/p/standalone-bittorrent-bt-client-usb-nas-ftp-samba-p rinter-upnp-sharing-network-lan-server-26320
I uploaded a new firmware: http://code.google.com/p/snake-os/ to add new features like web server, ftp, etc.
Is it possible to install Daapd? It would be awsome to be able to install a way to stream all the music there. The firmware Snake OS has basic support for installing Opkg packages. This makes it possible to easily and safely add new programs to the system.
Any ideas?

Try:
Trouble installing iTunes or QuickTime for Windows

Fritz.Nas Upload

Similar Messages

Maybe you are looking for