FRM-40011 Form was created by an older version of form
Hi all,
I got the message "FRM-40011 Form was created
by an older version of form builder" when I created a
form using form6i without the patch and ran it on 9iAS
Rrelease 2. So I applied patch 10 and compiled the
form and ran it again. But I still get the same error.
What am I missing?
Our 9iAs is on Win 2000 SP2(if it matters).
Thanks in advance
Yuga.
Hi,
if this problem occurs on teh Web, then the message normally is "Forms client" too old, which points to that the f60all.jar files used are not compatible with the patch version of the Forms Services. To fix this you would have to replavce f60all.jar with the version of the patch installed on teh server. Also clear the Jinitiator cache directory on the client (which must not be necessary).
Normally here is no difference between a Forms6i file created with the base release vs. one create with a patch set. So the problem must be in the configuration of your environmnet and my bet would be as mentioned above.
Frank
Similar Messages
-
FRM-40012: Form was created by a new version of Form Builder.
I am using Oracle Developer Suite 10g (10.1.2.0.2), which is the newest DS download. But this is on an Application Server version 10g (9.0.4.1). So The following message is received when the server tries to run a .fmx file compiled using Forms Builder 10.1.2.0.2.
FRM-40012: Form was created by a new version of Form Builder.
Would I be able to download Oracle Developer Suite 10g (10.1.2.0.0) and run .fmx files on AS 10g(9.0.4.1)? If so, how would I download DS 10g(10.1.2.0.0), it is listed on the DS download page but unlike the other DS downloads there is no link to download the DS.
Thanks,
-michelleMichelle,
Forms 10.1.2.0.0. should be executed on Oracle Application Server 10.1.2 and Forms 9.0.4 should be run on Oracle As 10g (9.0.4). There are hanges in teh required source files between the twoversions, causing the error you see.
Frank -
Error FRM-40012 Form was created by a new version of Oracle Forms.
Hi,
I install my db, AS and Developer Suite in the same machine. When I run the forms by Developer, it keep complaining report server unaccessable. Someone told me to run it by AS. When I try, the error FRM-40012 prompts out. I check the version of Form is 10.2.1.0.2 and the Forms Services Version is 9.0.4.0.19 which is the only available version in Oracle web site.
Can anybody tell me how to do to solve the problem? Thanks.
RgdsTo say things a little clearer, don't develop with Forms 10 and deply on Forms 9. If you want to develop on Forms 9.0.4 & deploy on 9.0.4, that will work.
Also, 10gR1 (which includes Forms 9.0.4) is going to be desupported at the end of this year. 10.1.2.0.2 is a good place to be right now.
So, the best answer is to keep developing in Forms 10 & get the Forms 10 in AS 10gR2 Forms & Reports Services which is available for download on OTN at: http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Be sure to look for Forms & Reports Services Standalone. It is a one disk download for most platforms.
Cordially,
Steve -
This was created on an older version and is unable to open.
I create a Keynote on my Macbook Pro using the latest version of Keynote.
I save it to Dropbox.
ON MY iPAD: I download the Keynote on Dropbox and then select 'Open In Keynote'. I then get the message that the Keynote cannot be opened due to it being created with an older version. However, ALL versions of Keynote are fully up to date!
Can anyone shed any light on this for me?Are you sure it was created in the last version of Keynote ('09) and not an older version? I've had no problems with opening them on the iPad in the new Keynote version. I also used to Dropbox route.
I did have issues with some old documents which were created in (even) older versions of Keynote/Numbers. In that case i could solve it by opening them in Keynote/Number '09, save them and then open them in Keynote 6. -
i accidentaly deinstalled support pieces to my itunes. went to use it and it failed. apple told me to deinstall the whole thing and re-install it. I did this but still it failed. when i go to open it it reads "the file I Tunes Library. It! cannot be revealed because it was created by a newer version on I tunes". help?
I backed up my iPhoto Library to an external drive even though it looked way to small to hold all my photos. I have tried several times to open iPhoto whilst depressing the option and command keys but get the same message again:
"The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" Behind this, the little wheel is turning and it says "Loading Photos" (but it doesn't).
I've got to access these photos for a project deadline that's looming so any help would be really appreciated. -
My form was created by FormsCentral. I save as a PDF and emailed it to all of my club members. When they complete the form, save it, and email it back to me, I get a blank form. Why?
If you had iCloud backup turned on, and it made a backup - yes. If you didn't have iCloud backup turned on - but were using iCloud for Contacts, calendars, etc. You will get the contacts and calendars, etc back.
Purchases made with your appleID can be redownloaded as long as they are still available in the iTunes store.
If you connected your phone to a computer with iTunes, there may be a backup on there as well. -
The Adobe Forms was created with Disable Fields!
Hi All,
I am new in Adode Interactive Forms ABAP. I am trying to implement a simple scenario using Web Services published by RFC on ABAP side and simple form with one field MATNR to bring a Description MARKT, and button to call the Web Services. I configured ADS on Server, installed Adobe LifeCycle 8 and SAP GUI 7.1. I created the Adobe Form and it was actived.
My issue is, when a run the program to generate a PDF, using the FMu2019s 'FP_JOB_OPEN'
, 'FP_FUNCTION_MODULE_NAME', CALL FUNCTION i_funcname, the Adobe Forms was created with disables fields. I canu2019t fill it and canu2019t press the button to call WS on ECC.
Could you help me?
Thank you!
Fábio Ferri
SAP Consultant NetweaverHi fabio,
When you say the example ran successfully is it without any error messages..?
Did you check in spool "SP01" if there something sitting out there.
To my understanding PDF rendring is dependent in 2 aspects.
1) the output device type you select (this should be a PDF enabled printer)
2) Programatically if you say it should go to a printer or spool.
Just try with FP_TEST_00 either in sfp or SE38 and try both print preview and print.
in print priview it should display the PDF on the screen.
In print it should display as success message and in spool it should have the corresponding PDF. if both are working fine then the ADS and output device config are correct and it all depends on how do you handle the PDF output.
Just try the above approach and post the results,
Cheers, -
I have tried to download an older version but it will not run because the Itunes Library File was created by a newer version of iTunes. I have uninstalled the newer version but still can't run the older version. Caln anyone help me with this?
Stop trying to use an old version of iTunes.
Install the latest version from http://www.apple.com/itunes/download -
Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks
Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden -
For your reference I’m using a MacBook Pro running 10.5.8. Several weeks ago on a Monday I received an upgrade for iTunes. When Tuesday arrived I attempted to log in so that I could download the latest freebie song(s). I was met w/this message: “The file ‘iTunes Library.itl’ cannot be read because it was created by a newer version of iTunes.”
The music/video files are still on my Mac (I’ve verified that via Searchlight), but I’m unable to open the program. Since I know that 10.5.8 is rapidly becoming prehistoric, could it be that the newest iTunes isn’t compatible w/this particular OS? I’d like to switch up, but understand that the newest OS won’t work on a Mac of this vintage (6 years old). In addition, my Adobe products (all CS2) won’t work w/anything newer than 10.5.8, so I’m reluctant to go to a newer OS (I just can’t afford the Adobe upgrade $$$ @ this point).
Is there any way to get a download of an “old” iTunes version? If there were, I’d simply refuse any future upgrades until my personal economy allows me to stop working as if it were 2006. Please advise, somebody!I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575 -
Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
Cheers
AndrewTell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
A couple hours ago I updated my iPhone 4 to iOS 7.1.2 or the newest version of iOS (not 8). When it finished, I turned it on and it showed a charger at the bottom of the screen and in the middle, an arrow, and at the top it showed the iTunes icon. I've never seen this before, so I took it as I needed to plug my phone up into my laptop? Well the first thing it said when I plugged it in, it said something like it can't be used until it's turned on. I updated it and it messed up even more, which caused me to uninstall all of the apple inc. software. I reinstalled iTunes and now when I try to open it, all it says is "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." First, what does the charger and iTunes icon mean when I try to turn my phone on? And how do I fix iTunes on my laptop?
Hello there, livviboobear.
It sounds like your error message is in regards to having installed an older version of iTunes on your computer. The following Knowledge Base article offers up the step-by-step on how to properly uninstall iTunes:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Once uninstall, follow the link in the article to get to the most current version of the iTunes installer.
In regards to the screen on your phone, this article explains how to resolve it:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have my iTunes on a Windows XP operating system. My iTunes Library is stored on a external hard drive(H) with a desktop shortcut on the C drive pointing to the H drive where the iTunes LIbrary is located. I have it set up so that when I click the iTunes desktop shortcut it routes to the H drive and retrieves my iTunes Library from there. I've had a hard drive crash before and lost all of my iTunes Library.
So, if all of that makes any sense, I got a new desktop computer with Windows 7 Operating System and went online and downloaded the most recent iTunes softwear. I then attached the external hard drive from my old Windows XP system to the new Windows 7 Sytem. I routed it the same way I had it on the old system, but i keep getting this error message- "The file *iTunes Library.itl* cannot be read because it was created by a newer version of iTunes." To make matters worse, I tried to put the external hard drive back on my initial Windows XP Sytem and now its giving me the same error message. I know its alot to digest, but can anybody help me?????For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
tt2 -
my computer crashed and I had to re load my operation system. now, when I try to open my itunes all I get is a message that says "can not be read because itunes was created by a newer version" what does that mean and how do I correct it. I need my music back!
As iTunes is uopgraded the newer versions require that the iTunes database be upgraded to match. It sounds like you now have an older version of the sftware attempting to load an upgraded library which it can't do.
What version of OS X are you running?
What version of iTunes are you currently running?
What versions were you running when your system crashed?
Allan -
new iTunes won't open. Error says cant read iTunes Library.itl becuase it was created by a newer version of iTunes.
I had just installed iTunes 10.3.1 as was instructed by the Genius at the store.I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
Maybe you are looking for
-
Use the value of a field as column-name of a dynamic table
Hi All I have the following situation: a) Internal table TB_ORDER_CONDITION ==> data: tb_order_condition type standard table of bapicond. sample of the internal table TB_ORDER_CONDITION: CONT_TYPE # CONDVALUE# CONDBASEVAL ZR00 #
-
Add custom content before E-Mail signature. In outlook add-in c# développment
Hello, I have make an add-in 2013 for outlook project in C#. I upload on a server some file and put in the mail body the link to them. But i want to add this 'link part' before the E-mail Signature. How could I do that? I have healready see code that
-
How to call RFC in asynchronous mode using JCo.
I have java class and want to call R/3 through JCo in asynchronous mode. Is there any solution for this?
-
Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos. Occasionally it will recognize and download photos, most of the time though it hangs in "loading" mode with nothing downloaded. I've unplugged, r
-
ASP: BEHAVIORS/SERVER-BEHAVIORS MM-DMWR MX 2004
ASP: BEHAVIORS/SERVER-BEHAVIORS MM-DMWR MX 2004 I use dmwr mx 2004, well What statement I use to include a webpage in an email body ? Like for writting html email the statement: myMail.HTMLBody = "<h1>This is a message.</h1>" also how setup except fr