FRM 40034: cannot attach the library file

I got this message when try to run the DEVELOPER 2000 demo program after installed it on a NTserver,how can i solve this problem?
thanks
null

Hi,
You have to change your Windows registry.
When you open a FMB file Forms looks in the registry in HKEY_LOCAL_MACHINE; SOFTWARE; ORACLE -> FORMS(version)_PATH. In that key you have to set the sub-directory where the pll-file is located.
Then open Forms again and it should be solved.
null

Similar Messages

Urgent! FRM-10270 Cannot attach the library

I get the error message "FRM: 10270 Cannot attach the library SYSLIB while opening menu BMENU" but only when i try to open a second form while the first form is still running.
Both forms are working fine as long as they are not running at the same time.
It seems like the second form opening does not have access to the FORMS60_PATH.
All the forms and libraries (plx) are in the FORMS60_PATH.
I am running developer_6i forms & reports on a HPUX 11i with patch 11 and I am trying to access them through jinitiator 1.3.1.9 on a XP machine.
I would apprecate if anybody have any ideas about this error.
BR/Marcus

Thanks a lot for the tip. I used truss and realised that it found the library but was not allowed to open it. The kernel parameter maxfiles was set to low.
I increased it and everything works ok
BR
Marcus

FRM: 10270 Cannot attach the library when two forms run at the same time

I get the error message FRM: 10270 Cannot attach the library SYSLIB while opening menu BMENU but only when i try to open a second form while the first form is still running.
Both forms are working fine as long as they ar not running at the same time.
It seems like the second form opening does not have access to the FORMS60_PATH, because you can not open a third form because it can't find it.
All the forms anf libraries (plx)is in the FORMS60_PATH.
I am running developer_6i forms & reports on a HPUX 11i machine and I am trying to access them through jinitiator 1.3.1.9 on a XP machine.
Best regards
Macke

Thanks a lot for the tip. I used truss and realised that it found the library but was not allowed to open it. The kernel parameter maxfiles was set to low.
I increased it and everything works ok
BR
Marcus

FRM-40034 Cannot attach library problem HELP!

I am trying to load a form (Oracle Forms 4.5) on a DEC Alpha running UNIX and I keep getting this error code. Through further investigation I was told to find the ORACLE.INI FORMS45_PATH and make sure that there is only one line in that file. I can't find the file in this system, and I was wondering if anyone has any other suggestions or solutions to this problem?
THANKS IN ADVANCE!!
Christine

On Unix systems you have to set FORMS45_PATH as a normal environment variable using set or setenv depending on your shell
The path should contain all the directories that contain your forms and plls that you want to reference.
ORACLE.INI is only used on Forms 4.5 on old 16 bit windows (3.1) I did go in and change a particular users environment using the set FORMS45_PATH /dir1/dir2/forms/ . This directory has all of the .fmb, .fmx. and the .pll files in it. Is that all I need to do?
When I go in to try and run a form after doing that, I get another log in prompt, and the user name and password does not work - in fact all user names in the system with thier passwords do not work. Is there something else I have to do?
In addition, what exactly are .pll files? Do you know of any place that I can get complete documentation on libraries and their functions?
Thanks again!
Christine

FRM-40039 cannot attach the libray C:\ORA902\forms90\webutil

I have this mistake, when try to run my forms, I compile de forms is OK. This forms try user the library Webutil, is the first time I try use.
I use the forms version 9.0.2.10. and webutil version 1.0.6.
I use the manual Oracle Forms Developer Webutil Users Guide Release 1.0.6 for configuration the webutil
I dont know was wrong.
Thanks for all.
Manolo

where we will get the plxopen the pll in Forms-builder, then use Porgam->Compile module (Strg+T)
plz mention clearly in which path we have to copy that file.There is a config-file named default.env (located in $ORACLE_HOME\forms\server), it contains a settings named FORMS_PATH. Either put your plx (and all of your fmx) in one of the directories listed there, or add a new directory to the list where you have placed your files in.

Cannot access itunes library file over network

Hi,
So I want to set up my old Mac Mini as a home server for our Apple Tv2 and my Macbook pro, but I am having difficulty setting up iTunes. All of our music is stored on an external hard drive, attached to the Mini and i have set up an iTunes library on the Mini too. So far so good, and I can access this library on the MacBook as a shared library, and the Apple TV through home sharing.
But, I want to go further and add to and edit the shared library (i.e. the one on the Mini) using iTunes on my MacBook. Am I able to also access the library file stored on the Mini from iTunes on the MacBook pro, so I am using the same library file on two instances of iTunes on two different computers?
Currently when I try (by opening iTunes on the MacBook while holding down option, and 'choosing' the library on the Mini, i get the following error message:
The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file.
Perhaps this is a bridge too far, but I would appreciate any help.
Thanks!
Matthew

Apart from the user permissions issue which could probably require you adjusting user permissions on the files on the mini, you cannot have the library file open in two running iTunes concurrently.

FRM-10102: Cannot attach PL/SQL Library menu_library

Dear All:
I am using Developer 6i Version 6.0.8.23.2 (32 Bit)
I am facing following error while opening a form in Forum Builder.
FRM-10102: Cannot attach PL/SQL Library menu_library. This library attachment will be lost if the module is save.
I know that I have to add the address of the folder in which the library is located, but I forgot the Registry Key value and location.
Anyone can help me?
Thanks
Hassan

Yes, I understand that I need to set the FORMS90_PATH in default.env file.
My question is how do I say "Pick up the library from the same directory as the form fmx".
Do I have to say it like
"FORMS90_PATH = C:\MyDir\Forms;" ?
I was a hesitant to hardcode the directory name( as above) in the default.env file, because incase I change the the library plx directory, I will have to update the envoirnment file again.
So is there any other way to do it ?

WebUtil Demo Runtime Error FRM-40039: Cannot attach library webutil

I download the WebUtil Demo from
http://www.oracle.com/technology/products/forms/htdocs/webutil/Webutil_demo.zip
I follow the instruction given in the file ReadMe.html
I am using Oracle Developer Suite 10g Release 2.
There is no compilation error.
I started OC4J Instance
The following error appears:
FRM-40039: Cannot attach library webutil while opening form WU_TEST_106
Help!

I try to compile the WEBUTIL.pll but with comilation error.
I run FOrms Builder 10g Release 2
Click on File, Open
Select the file WEBUTIL.pll
Click on Program, Compile Module
but showing error
Compilation errors on WEBUTIL_DB_LOCAL:
PL/SQL ERROR 201 at line 9, column 12
identifier 'WEBUTIL_DB.OPENBLOB' must be declared
PL/SQL ERROR 0 at line 9, column 5
Statement ignored
PL/SQL ERROR 201 at line 18, column 12
identifier 'WEBUTIL_DB.CLOSEBLOB' must be declared
PL/SQL ERROR 0 at line 18, column 5
Statement ignored
PL/SQL ERROR 201 at line 24, column 5
identifier 'WEBUTIL_DB.WRITEDATA' must be declared
PL/SQL ERROR 0 at line 24, column 5
Statement ignored
PL/SQL ERROR 201 at line 29, column 12
identifier 'WEBUTIL_DB.READDATA' must be declared
PL/SQL ERROR 0 at line 29, column 5
Statement ignored
PL/SQL ERROR 201 at line 35, column 12
identifier 'WEBUTIL_DB.GETLASTERROR' must be declared
PL/SQL ERROR 0 at line 35, column 5
Statement ignored
PL/SQL ERROR 201 at line 40, column 12
identifier 'WEBUTIL_DB.GETSOURCELENGTH' must be declared
PL/SQL ERROR 0 at line 40, column 5
Statement ignored
PL/SQL ERROR 201 at line 45, column 12
identifier 'WEBUTIL_DB.GETSOURCECHUNKS' must be declared
PL/SQL ERROR 0 at line 45, column 5
Statement ignored
Failed to generate library.
HELP!

WEBUTIL-URGENT FRM:40039 Cannot attach library WEBUTIL while opening form x

Hi,
I 'm working with 9iAS R2 on Linux.
I'm testing the webutil by using a my test form.
Give that in OS Windows 2000 the test form works fine.
On Linux, I compile the form without problem, but when I run the form on web I have this error :
FRM-400039 : Cannot attach library webutil while opening form TEST_FORM
The Java console displaied this :
JInitiator: Versione 1.3.1.8
Uso della versione JRE 1.3.1.8 Java HotSpot(TM) Client VM
Directory principale utente = D:\Documents and Settings\contug
Configurazione proxy: Configurazione automatica proxy
JAR cache enabled
Location: D:\Documents and Settings\contug\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console windo
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://f92ias.inarcassa.it:7777/forms90/webutil/webutil.jar from JAR cache
Loading http://f92ias.inarcassa.it:7777/forms90/webutil/jacob.jar from JAR cache
Loading http://f92ias.inarcassa.it:7777/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
connectMode=HTTP, native.
Versione Applet Forms: 90270
I don't seem that nothing of unusual.
Could You say me somethig ??
Regards
Giordano

Hi Duncan,
How Do I do recompile the pll on Linux?? The environment development doesn't exist on Linux !!
I open my form in environment development on Win 2000, after I attach the pll without the path and save all.
After I move all on linux and compile the form useing 'f90genm.sh'. Until this step I don't have problem, the form compiled fine, but
when I running it, I show the error message FRM-40039 .......
Do I mistake something ???
I working on DB ver 7.0.2 and I can't produce the file PLX
Regards
Giordano

Webutil -frm-40039 cannot attach library

hi,
I have copied the web util demo from otn [http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm], and i tried to install it as per the instruction given over there .While compling it has not give any error but while running the form before opening the form it gives the following error FRM-40039 : cannot attach library /oracle/devsuite/forms/webutil while opening the from wu_test_106.
note - i have attached the webutil.pll at attach library.

where we will get the plxopen the pll in Forms-builder, then use Porgam->Compile module (Strg+T)
plz mention clearly in which path we have to copy that file.There is a config-file named default.env (located in $ORACLE_HOME\forms\server), it contains a settings named FORMS_PATH. Either put your plx (and all of your fmx) in one of the directories listed there, or add a new directory to the list where you have placed your files in.

FRM-40039: Cannot attach library d2kwutil while opening form xyz

Hi,
I am running forms 6i.
I copied the folder containing all executables (.fmx, .mmx, .plx) to my local directory 'C:\bin6'.
When i call this from Command Line
c:\orant\bin\ifrun60.exe C:\bin6\xyz.fmx
I get the error "FRM-40039: Cannot attach library d2kwutil while opening form xyz"
I verified that d2kwutil.plx is present in c:\bin6.
Note: I did not change anything in the FORMS60_Path in registry to point to my local directory.
Please help

Hi Smita
Pls answer urself the following questions and check...
1. did u attached the liberary to ur form...?
2. did u set the FORMS60_Path in the registery for the liberary...?
3.did u try a Ctrl-Shft-K (Compile All) then a Ctrl-T (Generate) and a save, then run your form... ?
4. did u check the path in the START IN property to the correct location.. .?if the answer is yes then pls try to do the following...
1. copy d2kwut60.dll + .PLL to client machine C:\orant\TOOLS\OPEN2K60\plsqllib
2. copy the required .FMX file to client pc.
Hope this helps... :)
Regards,
Abdetu...

FRM-40039 cannot attach library ofgbsl while opening ccw2031

I got the above error when I try to run the program ccw2031 on the ie browser. First of all there are 3 files attached in my 4.5 forms. These libraries are the following; OFG4BSL.pll, OFG4mnl.pll, OFG4tel.pll. Upgrading it to 10g for windows had no problems since there is a corresponding libraries namely OFGBSL.pll, OFGMNL.pll OFGTEL.pll and OFGMES.pll.
My program compiled with no errors when i tried attaching those 4 files in my Developer Suite 10g for unix.
The problem came out when I tried to run it using the Application Server.
And when I try accessing the program again in the forms developer i got the following messages:
FRM-10102: Cannot attach PL/SQL library OFGBSL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGMES. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGMNL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OFGTEL. This library attachment will be lost if the module is saved.
Questions: 1. Are there any libraries equivalent to these 4 files in UNIX?
2. Can I use the windows version and compile using frmcmp? Actually i tried this already but did not work.
3. How do I configure the Developer Suite 10g for Unix to be able to attach the libraries mentioned if it works?
Can Anybody help me.....Please.
Edited by: user7493752 on Jan 30, 2009 12:17 AM

First, you don't need to replace the pll's with the 4 in the middle (e.g. OFG4BSL) by the ones without the 4 in the middle and i wouldn't do it. The libraries belong to different versions of the forms-generator from oracle-designer (the *4*-ones form Designer 2000 generating forms 4.5, the ones without the *4* starting with version 6i). But both versions are "pure" pll's, so they can easily migrated to 10g.
FRM-10102: Cannot attach PL/SQL library OFGBSL. This library attachment will be lost if the module is saved.Your problems can be based on one of the following:
The pll's are not in the working-directory of your forms-environment, if any.
The pll's are not in one of the directories defined in the env-setting FORMS_PATH.
You attached the pll's to your forms with the whole path (not preferable) and now forms doesn't find that path in your application-server-environment.
Library-names are Case-sensitive, so if you attach MYLIB, the filename must not be mylib.pll but MYLIB.pll.
hope this helps.

FRM-40039: Cannot attach library webutil while opining form

I have installed webutil in Windows 2000 in order to perform some features.
When I run my forms from Forms Builder this message appear
FRM-40039: Cannot attach library webutil while opining form.
I don't know what is wrong. I have set the virtuals path, like this:
For an Oracle Developer Suite installation, add the following line to the file
j2ee/DevSuite/application-deployments/forms/forms90web/orion-web
.xml under the Oracle Developer Suite Oracle Home:
(The following assumes that you have installed WebUtil into a directory c:\webutil)
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
On a OracleAS install, define the same virtual directory in the forms90/server/forms90.conf file:
AliasMatch ^/forms90/webutil/(..*) "c:/webutil/lib/$1"
I need some help!!

You need to include the location of the pll into the FORMS90_PATH that is defined in your environment file - e.g. default.env

FRM-40039 Cannot attach library in Forms9i

I have an app that works in 6i that was recompiled in 9i and deployed to a server. The 9i app works locally (connecting to a db not on my machine), but will not work on the server. When I run on the server I get the error 'FRM-40039 Cannot attach library XXX while opening form YYY'. I have the same folder configuration on the server that I do on my laptop. I copied the libraries from their 'normal' location to OracleHome\bin, but I still get the error. I removed one of the libraries attached to the form, and received the error on the second library. The libraries are in the form without a path (just the library name). Can anyone help me? I need to go to QA in 2 days!!! Help!
Thanks -- Jean.

Couple of things to watch for. PLLs are looked for on the FORMS90_PATH - this is set up in the default.env file when you are running. So make sure the path is set correctly.
Also remember that if you are moving to Unix from Windows, Unix is case sensitive so
myFile.pll is not the same as MYFILE.PLL
Hope this helps.
Regards
Grant Ronald
Forms Product Management

Frm-40039 Cannot attach library

I have Oracle 10g and Developer Suite.
When I attach a Library, webutil.pll.
I can run it in forms developer,
but when I try to run in in the runtime, I get the ERROR frm-40039 Cannot attach library.
Why?

Have you compiled the pll and placed the plx in a place on the runtime server where Forms will find it (added the directory where the PLX is to the env variable FORMS_PATH)?

FRM 40034: cannot attach the library file

Similar Messages

Maybe you are looking for