FRM-40735: when-button-pressed trigger raised unhandled exception ORA-06508
Hi,
I built a report using Reports Builder, and a form that calls this report. When I try to run the rdf file (report), using [b]rp2rro.rp2rro_run_product I get the error:
FRM-40735: when-button-pressed trigger raised unhandled exception ORA-06508.
How fix it?
[]'s
Sandro
Hi Mark,
The debbuger stopped at line that was causing the error (rp2rro.rp2rro_run_product(REPORTS, 'myReport', SYNCHRONOUS, RUNTIME, FILESYSTEM,v_paramList , NULL);
The data type passed in arguments and its lenght that's ok... I don't know what I should do...
Sandro
Similar Messages
-
Frm-40735 when-button-pressed trigger raised unhandled exception ora-03114
hi everybody,
i am using oracle 10g release 2 in my test server and 10g release 1 in production server with forms in 10g running through the oracle 10g application server with no problem with our production server.
but the same form when i try to use through the same application server for my
with my test database server which is oracle 10g release 2 is giving me
frm exceptions and disconnecting the session.
like i get frm-40735 when-button-pressed trigger raised unhandled exception
ora-03114. then frm-40655 sql error forced rollback;clear form and reenter transaction. then when i try to exit it shows ora-24324 service handle not initialized.
The same thing when i try with my production server i dont get any exception handle error or forced rollback error.
i am not facing any problem as such to connect to my test database(release 2)
through sql plus client or TOAD OR ENTERPRISE MANAGER THEY ARE ALL FINE. IT IS ONLY WHEN I GO THROUGH THE APPLICATION SERVER TO ACCESS MY FORMS I GET THIS ERROR. BUT MY PRODUCTION IS RUNNING THE SAME WAY WITH NO ERRORS.
any suggestions welcome as i have to bring release 2 in the production next month
thanks and regards
manishORA-03114 not connected to ORACLE
Cause: A call to Oracle was attempted when no connection was established. Usually this happens because a user-written program has not logged on. It may happen if communication trouble causes a disconnection. In addition, this message could occur when ALTER SYSTEM KILL SESSION or ALTER SYSTEM DISCONNECT SESSION were issued with the IMMEDIATE qualifier because, in those cases, the client's connection to the database is terminated without waiting for the client to issue a request.
Action: Try again. If the message recurs and the program is user written, check the program.
zaibi. -
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-106561
I m working on Fusion Middleware forms 11g with windows plateform. I want to launch an exe (like notepad.exe) from my form on button click, which i m doing using the webutil dde.app_begin. My form is deployed on server, and i want to launch this application from client. The server is on linux. Now when i press the button it gives me error "FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-106561". Here is my code:
DECLARE
AppID PLS_INTEGER;
BEGIN
AppID := DDE.App_Begin('notepad.exe',DDE.App_Mode_Normal);
END;
Any help will be highly appreciable. Also, please tell me for any possibility, if i can call this exe from server, which is on linux.
Regards,
SharjeelAny one there pls help me in this. I seen all the forums and threads, for this, but could'nt find any solutions.
Any help will be highly appreciable.
Regards,
Sharjeel -
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-04063
Hi experts,
This problem as titled happened to me recently, and i found no way out.
I collected the FRD information, what i can get is:
GMDRCDSG, 11, Prog Unit, Entry, 361120504, /XGMDSRCHGMD_BASIC_SEARCH_PKG/INIT_GROUP
Unhandled Exception ORA-04063
State Delta:
Error Message: FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-04063.
ON-ERROR Trigger Fired:
Form: GMDRCDSGORA-04063 means some database object is broken, but this information does not specify exactly which
object it is . I thought it is caused by GMD_BASIC_SEARCH_PKG, which is programmed in GMDSRCH.pll.
So i recompiled the pld file, but didn't work.
The further action i took is to find out all the invalid package/package body in database, and recompile them.
Unfortunately, this also didn't work.
Any help is greatly appreciated, thanks in advance:)
TedCould anybody help? Please.
Thanks,
Ted -
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-29516
Hi,
The users are facing problem on opening the OAF pages on R12 instance.
They face this error when they,
1. Go to System Administrator responsibility.
2. Open page under Workflow > Administrator Workflow > Status Monitor.
3. This error pops up in the lower half of the form page.
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-29516
However, this error doesn't happen when people make direct login from homepage. Kindly help and suggest what need to be done.
EBS 12.1.3
DB 11.2.0.2.0
Thanks in advance.*
Holi*Can you find any details about the error in Apache log files and the application.log file?Saw two files, error*.log, and access.log. Please suggest if I need to see some other files, I am new to R12 environment.
error log
n request for destination: application://forms (no island or jgroup).
+[Fri Apr 1 09:05:04 2011] [error] [client 10.182.1.5] [ecid: 1301666704:10.10.241.79:3809:0:89,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://forms (no island or jgroup).+
+[Fri Apr 1 09:05:48 2011] [error] [client 10.182.1.5] [ecid: 1301666748:10.10.241.79:2404:0:299,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).+
+[Fri Apr 1 11:34:36 2011] [error] [client 10.11.219.90] [ecid: 1301675676:10.10.241.79:2404:0:414,0] File does not exist: /p01/app/applmgr/oappsp1/apps/apps_st/comn/java/classes//+
+[Fri Apr 1 11:34:38 2011] [error] [client 10.11.219.90] [ecid: 1301675678:10.10.241.79:8458:0:332,0] File does not exist: /p01/app/applmgr/oappsp1/apps/apps_st/comn/java/classes//+
+[Fri Apr 1 11:40:10 2011] [error] [client 10.11.219.90] [ecid: 1301676010:10.10.241.79:2562:0:467,0] File does not exist: /usr/local/oraapps/tmp/inst/apps/OAPPSP1_c201u334/portal/favicon.ico+
access log
+27.0.0.1 - - [01/Apr/2011:23:36:00 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"+
+127.0.0.1 - - [01/Apr/2011:23:36:20 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"+
+127.0.0.1 - - [01/Apr/2011:23:36:40 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"+
+10.32.16.114 - - [01/Apr/2011:23:36:55 -0500] "POST /forms/lservlet;jsessionid=3218513816b7b7e5c75d2c1e812eca1e21eb118fdac1cbb0d8eb1d618ee6ccbb.e3qKbN0Mc3yNe38Lb34KahuTbx10 HTTP/1.1" 200 2 0 "-" "Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_07"+
+127.0.0.1 - - [01/Apr/2011:23:37:00 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"+127.0.0.1 - - [01/Apr/2011:23:37:20 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-" -
FRM-40735 WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-01843
Hi everyone
When I run My form in Microsoft Windows Melinem , and I have Button on the form WHEN I press the button it works fine ,but when I run the same form in Microsoft Windows XP and WHEN I press the button it give this message :
FRM-40735
WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-01843
AND I RECOMPILE THE FORM IN Microsoft Windows XP BUT STILL I AM GETING THE SAME MESSAGE
WAITING FOR YOU VALUABLE ANSWER .
BEST REGARDS
JAMIL ALSHAIBANIForms [32 Bit] Version 6.0.8.23.2 (Production)
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
With the Partitioning option
JServer Release 9.0.1.1.1 - Production
and the script which is used in the button as the following :
DECLARE
CURSOR C1 IS
SELECT ITEM_CODE,AVERAGE_COST,STORE_CODE,ITEM_QUANTITY,TOTAL_COST
FROM IM_GOODS_RECIEVE_DETAILS
WHERE DOC_CODE = :IM_GOODS_RECIEVE_HEADER.DOC_CODE;
LOC_DOC_CODE VARCHAR2(10);
LOC_DOC_DATE DATE;
LOC_ITEM_CODE VARCHAR2(30);
LOC_ITEM_QUANTITY NUMBER(20,3);
LOC_CART_QTY NUMBER(20,3);
LOC_UNIT_CODE VARCHAR2(10);
LOC_TOTAL_COST NUMBER(20,6);
LOC_AVERAGE_COST NUMBER(20,6);
LOC_SUM_QTY NUMBER(20,6);
LOC_BALANCE NUMBER(20,6);
LOC_PRICE NUMBER(20,6);
LOC_BALANCE_COST NUMBER(25,6);
LOC_ITEM VARCHAR2(30);
L0C_TOT_COST NUMBER(20,6);
LOC_TOT_QTY NUMBER(20,6);
LOC_NEW_AVERAGE NUMBER(20,6);
LOC_ON_HAND_QTY NUMBER(20,3);
al_id Alert;
al_button NUMBER;
LOC_SYS_DATE DATE;
BEGIN
SELECT TO_DATE(TO_CHAR(SYSDATE,'DD/MM/YYYY')) INTO LOC_SYS_DATE FROM DUAL;
FOR R IN C1
LOOP
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(ITEM_QUANTITY,0)) INTO LOC_ITEM ,LOC_SUM_QTY
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :IM_GOODS_RECIEVE_HEADER.DOC_DATE
AND LOC_SYS_DATE
GROUP BY
ITEM_CODE
ORDER BY B.ITEM_CODE ;
exception
when no_data_found then
NULL;
when form_trigger_failure then
show_message(sqlerrm);
raise form_trigger_failure;
when others then
show_message(sqlerrm);
raise form_trigger_failure;
END;
BEGIN
BEGIN
SELECT (NVL(QUANTITY_ON_HAND,0) + (NVL(LOC_SUM_QTY,0))),NVL(ITEM_PRICE1,0),
NVL(QUANTITY_ON_HAND,0)
INTO LOC_TOT_QTY,LOC_PRICE,LOC_ON_HAND_QTY
FROM IM_LOCATION A, IM_INVENTORY B
WHERE A.ITEM_CODE = B.ITEM_CODE
AND A.ITEM_CODE = R.ITEM_CODE
AND A.STORE_CODE = R.STORE_CODE;
LOC_BALANCE := (:IM_GOODS_RECIEVE_DETAILS.ITEM_QUANTITY) - (LOC_TOT_QTY);
LOC_BALANCE := - (LOC_BALANCE);
LOC_BALANCE_COST := ((LOC_BALANCE) * (LOC_PRICE));
L0C_TOT_COST := LOC_BALANCE_COST + :IM_GOODS_RECIEVE_DETAILS.TOTAL_COST;
LOC_NEW_AVERAGE := ROUND(((L0C_TOT_COST)/(LOC_TOT_QTY)),5);
exception
when no_data_found then
NULL;
when form_trigger_failure then
show_message(sqlerrm);
raise form_trigger_failure;
when others then
show_message(sqlerrm);
raise form_trigger_failure;
END;
BEGIN
SELECT 1 INTO :GLOBAL.DUMMY
FROM COST_TEMP_SUM
WHERE S_GOODS_DOC = :IM_GOODS_RECIEVE_HEADER.DOC_CODE
AND S_GOODS_DATE = :IM_GOODS_RECIEVE_HEADER.DOC_DATE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
INSERT INTO COST_TEMP_SUM
VALUES(:IM_GOODS_RECIEVE_HEADER.DOC_CODE,
:IM_GOODS_RECIEVE_HEADER.DOC_DATE,LOC_SUM_QTY,LOC_ON_HAND_QTY,
LOC_TOT_QTY,LOC_BALANCE,R.ITEM_QUANTITY,
LOC_PRICE,LOC_BALANCE_COST,R.TOTAL_COST,
L0C_TOT_COST,LOC_NEW_AVERAGE,R.ITEM_CODE,LOC_SYS_DATE);
when form_trigger_failure then
show_message(sqlerrm);
raise form_trigger_failure;
when others then
show_message(sqlerrm);
raise form_trigger_failure;
END;
END;
IF LOC_BALANCE_COST = 0 THEN
UPDATE IM_INVENTORY
SET ITEM_PRICE1 = R.AVERAGE_COST
WHERE ITEM_CODE = R.ITEM_CODE;
ELSE
UPDATE IM_INVENTORY
SET ITEM_PRICE1 = LOC_NEW_AVERAGE,ITEM_PRICE2 = LOC_PRICE
WHERE ITEM_CODE = R.ITEM_CODE;
END IF;
-- THIS FOR ISSUED ITEMS QUANTITY
FOR R2 IN (
SELECT B.ITEM_CODE as LOC_ITEM_CODE, NVL(ITEM_QUANTITY,0) as LOC_ITEM_QUANTITY,
A.DOC_CODE as LOC_DOC_CODE, AVERAGE_COST as LOC_AVERAGE_COST,
TOTAL_COST as LOC_TOTAL_COST,A.DOC_DATE as LOC_DOC_DATE,
CART_QTY as LOC_CART_QTY,UNIT_CODE as LOC_UNIT_CODE
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :IM_GOODS_RECIEVE_HEADER.DOC_DATE
AND LOC_SYS_DATE
-- AND :EXPENSES_TAB.EXP_DATE
ORDER BY B.ITEM_CODE )
LOOP
BEGIN
SELECT 1 INTO :GLOBAL.DUMMY
FROM COST_TEMP
WHERE T_DOC_CODE = R2.LOC_DOC_CODE
AND T_DATE = R2.LOC_DOC_DATE
AND T_ITEM_CODE = R2.LOC_ITEM_CODE;
exception
when no_data_found then
INSERT INTO COST_TEMP
VALUES(R2.LOC_DOC_CODE,R2.LOC_DOC_DATE,R2.LOC_CART_QTY,R2.LOC_ITEM_QUANTITY,
R2.LOC_AVERAGE_COST,:IM_GOODS_RECIEVE_HEADER.DOC_CODE,
:IM_GOODS_RECIEVE_HEADER.DOC_DATE,R.ITEM_CODE,R.STORE_CODE);
when form_trigger_failure then
show_message(sqlerrm);
raise form_trigger_failure;
when others then
show_message(sqlerrm);
raise form_trigger_failure;
END;
Begin
al_id := Find_Alert('POST_DATA');
IF Id_Null(al_id) THEN
Message('User_Warning alert does not exist');
RAISE Form_Trigger_Failure;
ELSE
** Show the warning alert
-- jamil al_button := Show_Alert(al_id);
** If user pressed OK (button 1) then bring up another
** alert to confirm -- button mappings are specified
** in the alert design
-- IF R2.LOC_ITEM_QUANTITY != 0 AND al_button = ALERT_BUTTON1 THEN
IF R2.LOC_ITEM_QUANTITY != 0 THEN
BEGIN
UPDATE IM_TRANS_ISSUE_DETAILS
SET AVERAGE_COST = LOC_NEW_AVERAGE,
TOTAL_COST = LOC_NEW_AVERAGE * R2.LOC_ITEM_QUANTITY
WHERE DOC_CODE = R2.LOC_DOC_CODE
AND ITEM_CODE = R2.LOC_ITEM_CODE ;
END;
END IF;
END IF;
END;
END LOOP;
END LOOP;
GO_BLOCK('IM_GOODS_RECIEVE_HEADER');
:IM_GOODS_RECIEVE_HEADER.FLAG_COST := 1;
COMMIT;
SET_ITEM_PROPERTY('IM_GOODS_RECIEVE_HEADER.PUSH_BUTTON152',ENABLED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('EXPENSES_TAB.PUSH_BUTTON151',ENABLED,PROPERTY_FALSE);
SHOW_MESSAGE('The New Cost Price updated Successfully !!!');
END;
BEGIN
IF nvl(:IM_GOODS_RECIEVE_HEADER.FLAG_COST,0) = 1 THEN
Make_Block_Query_Only('IM_GOODS_RECIEVE_DETAILS');
ELSIF nvl(:IM_GOODS_RECIEVE_HEADER.FLAG_COST,0) = 0 THEN
Make_Block_Query_Only('IM_GOODS_RECIEVE_DETAILS');
END IF;
END;
best regards
Jamil Alshaibani -
FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502
Hi,
I am trying to run a form in which I have a button which when pressed should display another popup window with few text fields in it. I have a WHEN-BUTTON-PRESSED trigger on that particular button and its raising an exception called
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502.
When I debug the form with breakpoints its displaying the popup window correctly, but if I run it in a browser as soon as click the button it raises the Unhandled exception given above.
Can anyone help with this? Urgent please....
ThanksIt is VERY good to handle your exceptions, specially a certain pre-defined exceptions like NO_DATA_FOUND, TOO_MANY_ROWS, ZERO_DIVIDE etc...
You can also find samples on how to create user-defined exceptions, just search the online forms help (press the question mark in forms builder) for "User-Defined"
But however you handle your exception never ever do
WHEN OTHERS THEN NULL;If you do that you are telling to forms that no matter what kind of error is thrown do nothing, now that's very dangerous.
You might also want to check Oracle's documentation on [url http://www.oracle.com/pls/db102/portal.portal_db?selected=5]Application Development and do a search on "Exception Handling"
Regards,
Tony
Message was edited by:
Tony Garabedian -
FRM-40735:when-button-pressed trigger raised unhandled exception ORA-24247
hi all
i am using form 10g release2 i am having a problem
when i use the following stored procedure in form then i am getting this
error.
FRM-40735:when-button-pressed trigger raised unhandled exception ORA-24247
but the same code working fine when i use in SQLPLUS.
CREATE OR REPLACE PROCEDURE mail_attach (dir1 VARCHAR2, filename VARCHAR2)
AS
l_output utl_file.file_type;
l_file RAW(32767);
l_size NUMBER;
BLOCK NUMBER;
b BOOLEAN;
l_start NUMBER := 1;
TYPE ARRAY IS TABLE OF VARCHAR2(255);
l_data ARRAY := ARRAY([email protected]');
BEGIN
UTL_FILE.FGETATTR(dir1, filename, b, l_size, BLOCK);
l_output := utl_file.fopen('BACKUP', 'code.txt', 'r' );
utl_file.get_raw(l_output, l_file, l_size);
utl_file.fclose( l_output );
FOR i IN l_start .. l_data.COUNT
LOOP
UTL_MAIL.SEND_ATTACH_RAW (
sender => 'Mailer',
recipients => l_data(i),
subject => 'Data for ' || TO_CHAR((SYSDATE-1),'DD-MON-YYYY'),
attachment => l_file,
message => 'Dear User, Please find attached the upload
data for the period mentioned in the subject line.',
att_inline => FALSE,
att_filename => filename);
l_start := l_start + 1;
END LOOP;
END;and this is used in form when-button-pressed trigger.
BEGIN
mail_attach('UTL_PATH','code.txt');
message('FIle send successfully');
message('File send successfully');
END;hi
Mehwish now check the following code and its working fine with me in form..........
declare
dir1 VARCHAR2(200);
--filename VARCHAR2(200):='Logon.jpg';
filename VARCHAR2(200);
l_output utl_file.file_type;
l_file RAW(32767);
l_size NUMBER;
BLOCK NUMBER;
b BOOLEAN;
l_start NUMBER := 1;
TYPE ARRAY IS TABLE OF VARCHAR2(255);
l_data ARRAY := ARRAY('[email protected]');
BEGIN
-- EXECUTE IMMEDIATE 'ALTER SESSION SET smtp_out_server = ''192.168.56.103:25''';-- this is IP address and port of the server
UTL_FILE.FGETATTR(dir1, :filename, b, l_size, BLOCK);
--select directory_path into :filepath from dba_directories where directory_name='BACKUP';
l_output := utl_file.fopen('BACKUP',:filename, 'r' );-- i added :filename as a text item.
utl_file.get_raw(l_output, l_file, l_size);
utl_file.fclose( l_output );
FOR i IN l_start .. l_data.COUNT
LOOP
UTL_MAIL.SEND_ATTACH_RAW (
sender => 'Mailer',
recipients => l_data(i),
subject => 'Data for ' || TO_CHAR((SYSDATE-1),'DD-MON-YYYY'),
attachment => l_file,
message => :f,-- this is message item.
att_inline => FALSE,
att_filename => :filename);--this is attachment file name.
l_start := l_start + 1;
END LOOP;
message('File Send Successfully');
message('File Send Successfully ');
END;hope this helps you.
Attachment and mail are working fine with me, i can send attachment..............
sarah -
FRM-40735 when Button Pressed Trigger Raised Unhandled Exception ORA-03113
Hi all,
We are using oracle 9.2.0.4 on SUSE 10.When user try to insert record second time they are getting the error
FRM-40735 when Button Pressed Trigger Raised Unhandled Exception ORA-03113And we are also getting ORa-0600 [12333]-[253]-[1]-[253]
Please don't tell me that this is an oracle internal error and i have to contact oracle support.
Actaually earlier we were using Oracle 9.2.0.6 (64 bit)on sun soalris 8 9(64 bit) and now after migrating the same to Oracle 9.2.0.4 to RHEL4 (32 bit).
And i have also cross checked on the new server oracle 9.2.0.6 (64 bit) on rhel4 (64 bit).
please suggest me....Please don't tell me that this is an oracle internal error and i have to contact oracle support.WHY? But it's the one and only reason! What do you think, how we can solve internal error? Do we have a special utility to demand from you some logs and by uising that utility analyze your database and solve your problem?
-
FRM-40735 WHEN BUTTON PRESSED trigger raised unhandled exception ORA-29282
Hi All,
while entering data in EAM forcaste workorder in maintenance workbench am getting this error
FRM-40735 WHEN BUTTON PRESSED trigger raised unhandled exception ORA-29282
check google and oracle forums and checked versions of pll and plx (as mentioned in one forum) for the form every thing is fine
i hav also generated tkprof report but did'nt get enough info required
my environment
linux 5.6
R12.1.3
on 11.1.0.7
please do let me know how to attach the print screen and tkprof report
please help
zaviHi There,
Srini:
the form form name is different from one you mentioned in note
ORA-29282 In POST-DELETE Trigger In EAMWOMDF Form [ID 1364328.1]
any how i check the EAM diag option is set to yes,
sorry i cant upload the screenshots and trace file we cant upload any from company
here are few details from form-->help--> about
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3
Form Application : Enterprise Asset Management
Form Name : EAMPLNWB
Form Path : /u02/uat/apps/apps_st/appl/eam/12.0.0/forms/US/EAMPLNWB.fmx
Form Version : 12.0.78.12010000.28
Form Last Modified : $Date: 2011/05/17 02:44 $
Forms PL/SQL
APPCORE : 12.0.29.12010000.22
APPDAYPK : 12.0.2.12010000.6
APPFLDR : 12.0.6.12010000.2
APPTREE : 12.0.0
CUSTOM : 12.0.0
EAMMRMDF : 12.0.27.12010000.4
EAMOPMDF : 12.0.13.12010000.1
EAMRSMDF : 12.0.10.12010000.2
EAMWOMDF : 12.0.77.12010000.25
FNDAPLT : 12.0.1
FNDSQF : 12.0.3.12010000.8
GHR : 12.0.46.12010000.14
GLOBE : 12.0.76.12010000.10
GMS : 12.0.51.12010000.8
IGILUTIL2 : 12.0.32
IGILUTIL : 12.0.3
OPM : 12.0.7.12010000.2
PQH_GEN : 12.0.7
PSA : 12.0.17
PSAC : 12.0.5
PSB : 12.0.2
Hi Hussain:
from the note
Please see (Creating Work Orders with Activity gives PL/SQL: numeric or value error: ORA-06512: at "APPS.EAM_WORKORDER_PKG", line 1431 [ID 822365.1]).
it says about
to debug the issue, users has enabled profile EAM: Debug Profile Option needs to be set to Yes at site level.
Every time when WO API is involved, the following files are generated: createwo.log , updatewo.log.
where can i find those logs please specify the location
what i did
as said by hussain i have manually compiled form and libraries assocaited with that form
still waiting for reply from user
got tkprof report
few lines from that tkprof:
declare
m_stmt varchar2(512);
begin
m_stmt:='delete from sdo_geor_ddl__table$$';
EXECUTE IMMEDIATE m_stmt;
EXCEPTION
WHEN OTHERS THEN
NULL;
end;
some select statement
SELECT MAX(STOCK_LOCATOR_CONTROL_CODE), MAX(DEFAULT_DEMAND_CLASS),
MAX(CALENDAR_CODE), MAX(CALENDAR_EXCEPTION_SET_ID),
NVL(MAX(PROJECT_REFERENCE_ENABLED),2), NVL(MAX(PROJECT_CONTROL_LEVEL),1),
NVL(MAX(PM_COST_COLLECTION_ENABLED),2), MAX(PRIMARY_COST_METHOD)
FROM
MTL_PARAMETERS WHERE ORGANIZATION_ID = :B1
insert statement its performing
insert into eam_forecasted_work_orders( pm_forecast_id, group_id,
pm_schedule_id, activity_association_id, cycle_id, seq_id,
scheduled_start_date, scheduled_completion_date, action_type,
wip_entity_id, process_flag, wo_status, created_by, creation_date,
last_update_date, last_updated_by, pm_base_meter_reading ,
ORGANIZATION_ID )
values
( :1, :2, :3, :4, :5, :6, :7, :8, :9, :10, :11, :12, :13, sysdate, sysdate,
:14,:15,:16 )
please add a line through your vission
cheers
Zavi -
FRM-40735:when-button-pressed trigger raised unhandled exception ORA-01841
hello to all
i m getting this error FRM-40735: when-button-pressed trigger raised unhandled exception ORA-01841
and the trigger i had written is like this:-
DECLARE
CURSOR I IS SELECT SANCDATE,REFNO,PRINCIPALAMT,SANCAMT,TOTINSTALMENT,RATERECOVERY,AMTRECOVERED,INSTALMENTRECOVERED,
STARTYEARMM,ENDYEARMM
FROM PRMALOAN
WHERE EMPNO=:PRMALOAN.EMPNO
AND EARNINGDEDUCTION=:PRMALOAN.EARNINGDEDUCTION
AND PAYCALPERIOD IS NULL;
d date:=to_date('200908','yyyymm');
s date;
e date;
BEGIN
go_block('prmaloan2');
OPEN I;
LOOP
FETCH I INTO :PRMALOAN2.SANCDATE,:PRMALOAN2.REFNO,:PRMALOAN2.PRINCIPALAMT,:PRMALOAN2.SANCAMT,:PRMALOAN2.TOTINSTALMENT,
:PRMALOAN2.RATERECOVERY,:PRMALOAN2.AMTRECOVERED,:PRMALOAN2.INSTALMENTRECOVERED,:PRMALOAN2.STARTYEARMM,:PRMALOAN2.ENDYEARMM;
s:=to_date(':prmaloan2.startyearmm','yyyymm');
e:=to_date(':prmaloan2.endyearmm','yyyymm');
if
e is null
then
:prmaloan2.TEXT_ITEM164:=months_between(d,s);
exit when I%notfound;
next_record;
end if;
end loop;
close I;
END;
plz help me to remove this errorthis is the description of my table:-
desc prmaloan
Describing prmaloan....
NAME Null? Type
EMPNO NOT NULL VARCHAR2(8)
EARNINGDEDUCTION NOT NULL VARCHAR2(6)
REFNO NOT NULL VARCHAR2(15)
SANCDATE NOT NULL DATE
PRINCIPALAMT NUMBER(8,0)
SANCAMT NUMBER(8,0)
RATERECOVERY NUMBER(5,0)
TOTINSTALMENT NUMBER(3,0)
AMTRECOVERED NUMBER(8,0)
INSTALMENTRECOVERED NUMBER(3,0)
STARTYEARMM VARCHAR2(6)
ENDYEARMM VARCHAR2(6)
CHANGEDATE DATE
USERID VARCHAR2(30)
PAYCALPERIOD VARCHAR2(6) -
FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06503
Hello to all...
I am developing a form on form 6i like a registration form....
Suppose emp_name is a text item....
I need to validate that item such that number ,null and special characters should not be allowed.
I have created a function to check those validations
function v_check(p_item_name varchar2)
return boolean is
begin
for i in 1..length(p_item_name)
loop
if substr(p_item_name,i,'1') in ('1','2','3','$','%','@','!','#') then
return false;
end if;
end loop;
end v_check;
When i click on save_Record button it commit the form i'm checking the emp_name field with this validation by calling the above function.
for save_Record button i have written this code WHEN-BUTTON-PRESSED trigger
declare
a number;
begin
if :iptable.ip_name is null or (not v_check(:iptable.ip_name)) then
set_alert_property('alert',title,'name validation');
set_alert_property('alert',alert_message_text,'null ans spl char are not allowed');
a:=show_alert('alert');
go_item('iptable.ip_name');
raise form_trigger_failure;
end if;
if :system.form_status='CHANGED' then
set_alert_property('alert',title,'Save Box');
set_alert_property('alert',alert_message_text,'Do u want to save');
a:=show_alert('alert');
if a=alert_button1 then
commit_form;
else
raise form_trigger_failure;
end if;
else
set_alert_property('alert',title,'Save Box');
set_alert_property('alert',alert_message_text,'noting to Save Box');
raise form_trigger_failure;
end if;
end;
But i'm gettin this
FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06503
exception
How can i resolve this error...help me
thanks...
Edited by: maddyd2k on Nov 25, 2010 10:37 AMHi,
Your function v_check actually can return a NULL value wich is not TRUE neither FALSE.
Modify your function like this :
function v_check(p_item_name varchar2)
return boolean is
l_return boolean := true;
begin
for i in 1..length(p_item_name)
loop
if substr(p_item_name,i,'1') in ('1','2','3','$','%','@','!','#') then
l_return := false;
end if;
end loop;
return l_return;
end v_check; -
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-29261
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-29261.
I m getting above message when I try to click on the button on form created using Form Builder 10G.
I want to send email using UTL_MAIL.
Code is:
declare
vSend VARCHAR2(30) := '[email protected]';
vSubj VARCHAR2(50) := '10g new mail package';
vMesg VARCHAR2(4000);
vMType VARCHAR2(30) := 'text/plain; charset=us-ascii';
BEGIN
vMesg:= 'Hello mail 10g worked';
utl_mail.send(vSend, '[email protected]', NULL, NULL, vSubj, vMesg, vMType, NULL);
END ;Pl tell me asap whether I am right or not?
-
Frm-40735-when-button-pressed trigger raises unhandled exception ora-01430
Hi,
I am running my developer6i application on winxp on one of my clinet side I got error frm-40735-when-button-pressed trigger raises unhandled exception ora-01430 when I press the button which give me the alter button to select yes or no before this the error araises.. but in the other client side its working correctlly with no such error message on same OS and developer6i version...i suppose you are getting 1403 and not 1430
++++++
Error: ORA 1430
Text: column being added already exists in table
Cause: An ALTER TABLE ADD statement specified the name of a column that is
already in the table.
All column names must be unique within a table.
Action: Specify a unique name for the new column, then re-execute the
statement.
++++++
1403 is no data found
so most likely you are executing a
select ... into ...
which is user dependent through where clause
that might be an explanation to your problem
but more info is needed on that
and surely you must clarify the ORA error you are getting. -
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508
Hi all,
In Production instance we have an issue on AP invoice workbench, gives an error (FRM-40735 Post-Query Trigger On Quering Invoice ) when we retrieve the existing invoice data entered.
For this we compiled the invalid objects and applied the patch according to the metalink id [ID 1209736.1]
After that we came up with new error FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508.
Can any one help us
Thanks
SAIHi Thanks for the reply we have implemented the following things
1) Please download and review the readme for Patch 8671468:R12.AP.B
2) Please apply Patch 8671468:R12.AP.B in a test environment.
3) Check the file versions , they have to be the same as given below.
Patch/115/sql/aphanwfb.pls 120.64.12010000.11
4) Please retest the issue.
5) If the issue is resolved, please migrate the solution as appropriate to other environments.
APXINWKB : When Entering Invoice Details, Get Error: FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06508 [ID 1284114.1]
This is done no luck.
Thanks
Sai
Maybe you are looking for
-
IPad no longer shows as a device in the left column of iTunes
This makes it really tough to sync...I am unable to use wifi synching. I just want to be able to sync like I used to with the USB cable plugged directly into the iMac. Here's what I've done to attempt to fix it: --restarted iPad --restarted iMac --co
-
Problems in balances of Tx. FS10N
Hi everyone, I have problems with FS10N transaction. The amounts of the debit shows in the credit column and viceversa. Another problem is that the amount of debit is shown with negative sign , when actually has to be shown with positive (+). Thanks
-
I have exclamation points next to some of my songs and they won't play...how do I get them to play?
-
Hi all, I have a table ZADDRESS which has fields like MOLGA,FIELD1, FIELD2, FILED3, FIELD4, FIELD5---FIELD8. Based on MOLGA, the values stored in the table would be names of the fields of infotype 6. Say STRAS is sotred in FIELD1, LOCAT in FIELD2. Fo
-
Logserver output and report generation
Hi All, I am trying to view the daily reports in merchandising workbench. Following are the steps which I followed: - Checked the checkboxe for daily reports in Merchandising workbench -> Application Settings -> Report generation - Copying the logser