FRM-41211 SSL-Failure From Forms
I have a Reports/Forms problem when running run_product from within Forms in a loop (for i in a..b loop run_product(i) end loop) for generating emails or faxes using MS Outlook starting with the second report.
Error message "FRM-41211 SSL-Failure...".
When generating only one report it is no problem.
In Outlook after while a protocol message appears saying "Conversion Error...".
null
hello,
sounds like a timeout problem. please check with oracle support services. might be version problem.
regards,
the oracle reports team
Similar Messages
-
When i'm running the reports from a form under Forms6i it is
giving an error like
FRM:41211 integration error.SSL failure running another product.
please give me the solution.
Regards,
Suresh.BWe are using reports 10g R2 under linus. ias 10g R2
-
Frm-41211 SSL integration error
Several sites have experienced problems running a report from an Oracle Forms module, including us, especially sites that have upgraded Reports (we went from 3.0 to 6i).
What worked for us was a mixture of solutions culled from OTN and Metalink:-
1. Add the location(s) of your Reports runtime files to the registry key REPORTSxx_PATH.
2. Create a shortcut to the correct version of the Reports Background Engine in your Startup folder.
3. De-install any previous version of Reports you may have.
Only by carrying out all three tasks did we eliminate this problem.
Andrew HunterAs Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad -
FRM-41211 SSL Error Integrating with another product
Hi All
Getting the following dreaded error. Seached this and forms forum and tried all things
setting REPORTS_TMP directory
removing the SSO option in reports
Still same error. I tried running reports directly by using the reports url and it works fine.
Any help appreciated.
Rgds
ArvindWe are using reports 10g R2 under linus. ias 10g R2
-
FRM-41211 Integration Error SSL - Oracle Forms 10g
Hi all.
I have FRM-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms in this code:
=====================================================
DECLARE
BEGIN
repid := find_report_object('MODULE21');
v_rep := RUN_REPORT_OBJECT(repid);
-- jobid := substr(v_rep, length('rep60_WS70004')+2, length(v_rep));
-- web.show_document('/reports/rwservlet/getjobid'||jobid||'?server=rep3945','_blank');
END;
=====================================================
I have error: FRM-41211 SSL integration error .....
OracleAS 10g server began on Windows XP SP2.
Do you help me ?
Very thanks !!Do you help me ?
Thanks. -
FRM-41211 Integration Error SSL - OracleAS 10g
Hi.
I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms.
I have error: FRM-41211 SSL integration error .....
OracleAS server began on Windoes XP SP2.
Do you help me ?Hi,
I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
Frank -
FRM-41211: Integration Error: SSL failure running another product Error
Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's ShahulAs Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad -
Error : FRM-41211 : Integration Error: SSL Failure Running Another Product
Hi All
I am using Forms & Reports 10g.
I have a report .And i am trying to call in my forms and also i am passing parameters.
But i am getting this error :
My Code is :-
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_Parameter(PLid, 'P_Block', Text_Parameter, :block_query.item_block);
Add_Parameter(PLid, 'P_Category', Text_Parameter, :block_query.item_category);
Add_Parameter(PLid, 'P_Dept', Text_Parameter, :block_query.item_dept);
Add_Parameter(PLid, 'P_Floor', Text_Parameter, :block_query.item_floor);
Add_Parameter(PLid, 'P_IP', Text_Parameter, :block_query.item_ip);
Add_Parameter(PLid, 'P_Room', Text_Parameter, :block_query.item_room);
Add_Parameter(PLid, 'P_Userid', Text_Parameter, :block_query.item_usr_id);
Add_Parameter(PLid, 'PARAMFORM', Text_Parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT_Query');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://A_F2_ITT_PC_4.AAHOS.LOCAL:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
*'||'server=Report_server_name&P_parameter='||'&block='''||:block_query.item_block*
*||'&category_name='''||:block_query.item_category*
*||'&dept='''||:block_query.item_dept*
*||'&floor='''||:block_query.item_floor*
*||'&ip_address='''||:block_query.item_ip*
*||'&room='''||:block_query.item_room*
*||'&usr_id='''||:block_query.item_usr_id*
*||'¶mform=no');*
End;
And the error i am getting is :- FRM-41211 : Integration Error: SSL Failure Running Another Producthi
please try something like this.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:block.item));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://Machine_Name:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=repserver&P_parameter='||:block.item||
'¶mform=no');
END; -
FRM-41211 Integration error SSL failure
Hello
Environment Client/Server Developer 6i.
i installed developer on a new clinet machine to rum my application. every thing is fine but when he tries to run any report the following error occured:-
FRM-41211 Integrarion error SSL failure runing another product.
and i have re-install the devloper but the error is stand.
any solution?
regards
aaksAs Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad -
Urgent: Getting FRM-41211 when calling reports from forms for first time.
Hi,
We are running into the FRM-41211 error, when the users try to call a report from a form. The report is called from a form in SYNCHRONOUS mode. This is the only report that is being called. No other report is
running at that time when the users get this error. This is happening only the first time when they try to call the report from the form. After getting this error, when they click on OK, and when they try to call this
report again, the report works fine.
Any ideas?? It's urgent...
Thanks
Vamshi.
nullMaybe try to use "run_report_product"?
-
Forms / Reports 6i - slow starting printing & FRM-41211 Integration error
We are having a problem with Forms / Reports 6i that seems to be slowly getting worse.
When beginning printing, the CPU usage goes up to 100%. In task manager I can see IFRUN60.EXE or RWRBE60.EXE, or IFBLD60.EXE or RWBLD60.EXE taking up 70% or so of the CPU time with the rest being taken up by the SPOOLSV.EXE spooler service.
This can be observed when
* Starting the Reports background generator from the Forms runtime
* Printing from a "print form" function inside the Forms runtime
* Starting Reports builder
* Printing from Reports Builder
* Printing from Forms Builder
The big problem is launching Reports from the Forms runtime. If this CPU / Spooler wheel spinning takes more than 30 seconds or so (and it can on slower machines), Forms thinks that it has failed to launch Reports and gives the error "FRM-41211 Integration error: SSL failure running another product" Eventually the reports background generator will finish launching.
This happens on NT 4, 2000, XP, and 2003 server. I have tried this in a "clean" configuration where nothing else (no extra services or anything) is running at all and this still happens. We are currently running Forms & Reports Patchset 17.
Does anyone have any idea what is causing this? Thanks.More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride -
Forms Crashing FRM-41211 Integration Error (6i)
In the last week, almost all of our sales reps have had their screens crash when they exit their order screens. When they exit the screen, it is supposed to print the orders they entered.
This also happens in other screens when they are trying to print.
Here is the Microsoft error that comes up first:
Then it gives the Forms error
FRM-41211 Integration Error. SSL failure running another product.
Our department has been working on this issue for a week. I just found out about it and was wondering if y'all had any suggestions....
Thank you for any assistance
PS - there has been no change in the clients, and I'm not aware of any changes with the servers. At least, that is what the Admin says.
Message was edited by:
lowerideMore info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride -
FRM-41211 when i generate DCI forms
[http://file.itpub.net/attachment/day_110329/20110329_f2a08a172af08d0829734ZEWHnszVEDf.jpg]
this is my question when i generate a provisional DCI forms in oracle clinical.
system prompt the FRM-41211:integration error:SSL failure running another product.
please help me!!Maybe try to use "run_report_product"?
-
FRM-92101 there was a failure in form server during startup
we are using R12, All the instance started successfully, but when i get in to the form server in application side the error comes like FRM-92101 there was a failure in form server during startup. this could happen due to invalid configuration. please look into web server log for details ,
it comes for all the three instances in this particular server , so what is the problem , and where is the web log server present ,
please give solutions ,
Thanks
Edited by: user12235518 on Mar 3, 2012 11:54 PM12/03/06 05:24:57.339 formsweb: Forms session <3> aborted: runtime process failed during startup with errors /R12/d01/oracle/R12I/apps/tech_st/10.1.2/bin/frmweb: error
while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory
12/03/06 05:24:57.339 formsweb: Forms session <3> exception stack trace:
oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
This error s coming for both new instance and cloned instance
Edited by: user12235518 on Mar 6, 2012 4:17 AM -
Calling a report from forms - FRM-40735 when-button-pressed raised unhandle
Hi,
I created a form to generate a pdf report.
its not going too well, so i need some help.
my form only has one button , when pressed I want it to generate a report in pdf format.
i created a when-button-pressed trigger and the following code is below:
I also create a web service proxy jar file,
the jar file is in the FORMS_BUILDER_CLASSPATH, and the jar file is imported from forms builder without any issues.
As of now I am hard coding everything in the code below to see if it works.
The error I am getting FRM-40735 when-button-pressed raised unhandled exception ORA-105100 i dont know why ?
This error is occurring at this line of code, please help, this is my first time doing something like this.
obj := publicreportserviceclient.new(); DECLARE
param_name varchar2(200);
un varchar2(200);
pw varchar2(200);
out_file varchar2(200);
obj ORA_JAVA.JOBJECT;
BEGIN
obj := publicreportserviceclient.new();
param_name := 'EMP';
un := 'Administrator';
pw := 'Oracle123';
out_file := 'D:\DevSuiteHome_1\j2ee\home\default-web-app'||'output';
publicreportserviceclient.callRunReport(obj,'/~administrator/Learn/Test1/Test1.xdo','EMP','141414',un,
pw,'pdf','New_Template',out_file);
web.show_document('http://jmenge-de.de.oracle.com:8889/j2ee/' || 'output');
exception
--check for ORA-105101
when ORA_JAVA.EXCEPTION_THROWN then
message('Java Exception : '
|| Exception_.toString(ORA_JAVA.LAST_EXCEPTION));
ORA_JAVA.CLEAR_EXCEPTION;
return;
--check for ORA-105100
when ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
return;
END;This is my java function
public void callRunReport (String reportPath, String paramName, String paramValue, String
username, String password, String format, String template, String outFile) {
try {
bip_webservice.proxy.PublicReportServiceClient myPort = new bip_webservice.proxy.PublicReportServiceClient();
// Calling runReport
ReportRequest repRequest = new ReportRequest();
repRequest.setReportAbsolutePath(reportPath);
repRequest.setAttributeTemplate(template);
repRequest.setAttributeFormat(format);
repRequest.setAttributeLocale("en-US");
repRequest.setSizeOfDataChunkDownload(-1);
ParamNameValue[] paramNameValue = new ParamNameValue[1];
paramNameValue[0] = new ParamNameValue();
paramNameValue[0].setName(paramName);
String[] values = new String[1];
values[0] = paramValue;
paramNameValue[0].setValues(values);
repRequest.setParameterNameValues(paramNameValue);
ReportResponse repResponse = new ReportResponse();
repResponse = myPort.runReport(repRequest,username,password);
byte[] baReport = repResponse.getReportBytes();
FileOutputStream fio = new FileOutputStream(outFile);
fio.write(baReport);
fio.close();
} catch (Exception ex) {
ex.printStackTrace();
}Thanks - please helpIf there is a way to make it work with Bi publisher, Please let me know.
I need to something to make it work with BI publisher.
thanks,
Edited by: Rooney on May 27, 2010 1:27 PM
Maybe you are looking for
-
I have a pop-up menu in the first cell of every row with three choices (and I may add more at a later date). I want the fill color of the row to change depending on which thing is selected. Is this hard to do?
-
Bright light on front droid razr maxx
Yesterday my razr maxx would not allow me to browse the internet. All I had to do was reboot. Ok. Simple. I get that. Computers have to be rebooted at times. This is a computer. NOW, my phone will not turn on, nothing. I plugged it in to charge and a
-
How can we alter the std SRM SC_PRINT (PDF ) to include SLoc & Approverst
Our users are printing out the Shopping cart PDF and are confused by the default values that appear, we would like to perhaps make some changes (to include for example) the delivery address (based on the storage location specified in the cart), how
-
Converting oracle forms into java forms
Hi all,, would help me plz on how to convert oracle forms into java using any tool; Is Jheadstart is the tool,, im having jeveloper version 10.1.2.1.0
-
Hello SAP PROF, 1. What is the Reference Conditions 2. How can we Delete the a Condition Record 3.What is the deference b/w Header and Item Conditions