Frm-41211 SSL integration error

Several sites have experienced problems running a report from an Oracle Forms module, including us, especially sites that have upgraded Reports (we went from 3.0 to 6i).
What worked for us was a mixture of solutions culled from OTN and Metalink:-
1. Add the location(s) of your Reports runtime files to the registry key REPORTSxx_PATH.
2. Create a shortcut to the correct version of the Reports Background Engine in your Startup folder.
3. De-install any previous version of Reports you may have.
Only by carrying out all three tasks did we eliminate this problem.
Andrew Hunter

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Similar Messages

FRM-41211 SSL-Failure From Forms

I have a Reports/Forms problem when running run_product from within Forms in a loop (for i in a..b loop run_product(i) end loop) for generating emails or faxes using MS Outlook starting with the second report.
Error message "FRM-41211 SSL-Failure...".
When generating only one report it is no problem.
In Outlook after while a protocol message appears saying "Conversion Error...".
null

hello,
sounds like a timeout problem. please check with oracle support services. might be version problem.
regards,
the oracle reports team

Frm-41211 SSL error

When i'm running the reports from a form under Forms6i it is
giving an error like
FRM:41211 integration error.SSL failure running another product.
please give me the solution.
Regards,
Suresh.B

We are using reports 10g R2 under linus. ias 10g R2

FRM-41211 SSL Error Integrating with another product

Hi All
Getting the following dreaded error. Seached this and forms forum and tried all things
setting REPORTS_TMP directory
removing the SSO option in reports
Still same error. I tried running reports directly by using the reports url and it works fine.
Any help appreciated.
Rgds
Arvind

We are using reports 10g R2 under linus. ias 10g R2

FRM-41211 Integration Error SSL - OracleAS 10g

Hi.
I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms.
I have error: FRM-41211 SSL integration error .....
OracleAS server began on Windoes XP SP2.
Do you help me ?

Hi,
I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
Frank

FRM-41211 Integration Error SSL - Oracle Forms 10g

Hi all.
I have FRM-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms in this code:
=====================================================
DECLARE
BEGIN
repid := find_report_object('MODULE21');
v_rep := RUN_REPORT_OBJECT(repid);
-- jobid := substr(v_rep, length('rep60_WS70004')+2, length(v_rep));
-- web.show_document('/reports/rwservlet/getjobid'||jobid||'?server=rep3945','_blank');
END;
=====================================================
I have error: FRM-41211 SSL integration error .....
OracleAS 10g server began on Windows XP SP2.
Do you help me ?
Very thanks !!

Do you help me ?
Thanks.

FRM-41211: Integration Error: SSL failure running another product Error

Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's Shahul

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Error : FRM-41211 : Integration Error: SSL Failure Running Another Product

Hi All
I am using Forms & Reports 10g.
I have a report .And i am trying to call in my forms and also i am passing parameters.
But i am getting this error :
My Code is :-
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_Parameter(PLid, 'P_Block', Text_Parameter, :block_query.item_block);
Add_Parameter(PLid, 'P_Category', Text_Parameter, :block_query.item_category);
Add_Parameter(PLid, 'P_Dept', Text_Parameter, :block_query.item_dept);
Add_Parameter(PLid, 'P_Floor', Text_Parameter, :block_query.item_floor);
Add_Parameter(PLid, 'P_IP', Text_Parameter, :block_query.item_ip);
Add_Parameter(PLid, 'P_Room', Text_Parameter, :block_query.item_room);
Add_Parameter(PLid, 'P_Userid', Text_Parameter, :block_query.item_usr_id);
Add_Parameter(PLid, 'PARAMFORM', Text_Parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT_Query');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://A_F2_ITT_PC_4.AAHOS.LOCAL:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
*'||'server=Report_server_name&P_parameter='||'&block='''||:block_query.item_block*
*||'&category_name='''||:block_query.item_category*
*||'&dept='''||:block_query.item_dept*
*||'&floor='''||:block_query.item_floor*
*||'&ip_address='''||:block_query.item_ip*
*||'&room='''||:block_query.item_room*
*||'&usr_id='''||:block_query.item_usr_id*
*||'&paramform=no');*
End;
And the error i am getting is :- FRM-41211 : Integration Error: SSL Failure Running Another Product

hi
please try something like this.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:block.item));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://Machine_Name:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=repserver&P_parameter='||:block.item||
'&paramform=no');
END;

FRM-41211 Integration error SSL failure

Hello
Environment Client/Server Developer 6i.
i installed developer on a new clinet machine to rum my application. every thing is fine but when he tries to run any report the following error occured:-
FRM-41211 Integrarion error SSL failure runing another product.
and i have re-install the devloper but the error is stand.
any solution?
regards
aaks

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Help on FRM-41211 Integration error: SSL failure running another product.

Am getting the above error, whenever I run my interface form calling a Report module.
What's baffling though is - this only happens during the initial call to the RUN_PRODUCT built-in. That is, after acknowledging the Form error, the Reports Background Engine is displayed, then everything would seem to be work after that.
Could this be a bug or is there a run-around to this?
Thanks a lot for your ideas and help.

We were getting this error on windows98 machines if someone had opened wordpad or some other unrelated application before running a report after they booted the machine. We solved the problem by forcing the reports backgroup engine to run at startup to prevent this error.
HOST (
'start /m RWRBE60.exe ',
no_screen); -- START BACKGROUND ENGINE TO PREVENT SSL INTEGRATION ERROR

Forms / Reports 6i - slow starting printing & FRM-41211 Integration error

We are having a problem with Forms / Reports 6i that seems to be slowly getting worse.
When beginning printing, the CPU usage goes up to 100%. In task manager I can see IFRUN60.EXE or RWRBE60.EXE, or IFBLD60.EXE or RWBLD60.EXE taking up 70% or so of the CPU time with the rest being taken up by the SPOOLSV.EXE spooler service.
This can be observed when
* Starting the Reports background generator from the Forms runtime
* Printing from a "print form" function inside the Forms runtime
* Starting Reports builder
* Printing from Reports Builder
* Printing from Forms Builder
The big problem is launching Reports from the Forms runtime. If this CPU / Spooler wheel spinning takes more than 30 seconds or so (and it can on slower machines), Forms thinks that it has failed to launch Reports and gives the error "FRM-41211 Integration error: SSL failure running another product" Eventually the reports background generator will finish launching.
This happens on NT 4, 2000, XP, and 2003 server. I have tried this in a "clean" configuration where nothing else (no extra services or anything) is running at all and this still happens. We are currently running Forms & Reports Patchset 17.
Does anyone have any idea what is causing this? Thanks.

More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride

FRM-41211 integration error

When we are calling Oracle report builder 6i report from Oracle forms 6i first time it gives us a FRM-41211 integration error. It's urgent.

hi
the problem in u r code please check u r run_product();
and also try something like this.
Errors
FRM 41211 Integration Error: SSL Failure Running Another Product.
Symptoms
"Frm-41211 Integration Error Ssl Failure Running Another Product" error while calling a report from form that is invoked by a shortcut place in the desktop. The Form runs fine when running from forms builder.
Cause
This is caused by the incompatibility introduced by the shortcut settings in XP.
Fix
In the Properties of the shortcut goto Compatibility-->Compatibility Mode tab. There uncheck the "Run this program in compatible mode for..." option. This will revert the default compatibility. This solves this issue. . sarah

Forms Crashing FRM-41211 Integration Error (6i)

In the last week, almost all of our sales reps have had their screens crash when they exit their order screens. When they exit the screen, it is supposed to print the orders they entered.
This also happens in other screens when they are trying to print.
Here is the Microsoft error that comes up first:
Then it gives the Forms error
FRM-41211 Integration Error. SSL failure running another product.
Our department has been working on this issue for a week. I just found out about it and was wondering if y'all had any suggestions....
Thank you for any assistance
PS - there has been no change in the clients, and I'm not aware of any changes with the servers. At least, that is what the Admin says.
Message was edited by:
loweride

More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride

FRM-41211 error when using RP2RRO_RUN_PRODUCT

I have a Form in version 6i which a calls a report using RUN_PRODUCT.
I used Forms Migration Assistant to convert it to version 10g. The FMA automatically replaced RUN_PRODUCT with RP2RRO.RP2RRO_RUN_PRODUCT.
I run the form and I get this error: FRM-41211: Integration error: SSL failure running another product.
Any ideas on how to solve this? Thanks in advance.

maybe adding the repository connection to your report server would give you a more specific error...
there's a repository connection entry in your <reportserverconfiguration>.conf file, which tells the report server the connection where to write the more specific error message. in this schema, you have to put a table (you can get the structure at otn), and now you can log the full error message/success of the report...
you can also access this by using this url:
http://<OAS>/reports/rwservlet
as far as I remember the call to get the job status of the report server is like this
http://<OAS>/reports/rwservlet/status?server=<your_report_server>
or something...but you can access the right url with above call...

Run report --- Integration Error ----SSL failure

I have a form that call a report through the Run_Product Built, this works fine on Developer 6 version, but after I upgraded to 6i, everytime I press the buttonn that call the report, an error message will appear that say "FRM-41211 Integration Error SSL failure running another product" after the Report Background Engine appeared. And the report will not start.
But if I press the button again, all will be fine.
Does anyone know what happens ?
PLease help!!!!

It is a bug in Forms 6i and possible workaround (from Metalink) is:
WORKAROUND as follows :
This brings up the Background Engine on startup and minimizes it.
1. Create a shortcut for rwrbe60.exe and do a CTRL+C to copy it.
2. Right click on the TASK BAR at the bottom of the screen and get the TASKBAR
Properties box up.
3. Select ADVANCED
4. Expand Tree for PROGRAMS.
5. Click of STARTUP folder.
6. Do a CTRL+V to Paste in the Shortcut to rwrbe60.exe.
7. Right Click on Shortcut and select Properties.
8. Click Shortcut Tab.
9. Make sure of the following fields are as follows:
TARGET : {drive}:\{path}\rwrbe60.exe /c
START IN : Is the location of your Reports and Forms.
SHORTCUT KEY : None
RUN : MINIMIZED

Frm-41211 SSL integration error

Similar Messages

Maybe you are looking for