Frm-41830 the list didn't contain entries
hi dear all,
the following query give no error and return records when i execute it in toad. but the lov didn't return any records. frm-41830 the list didn't contain entries.
SELECT ALL AP_VENDORS.VENDOR_ID, AP_VENDORS.VENDOR_NAME, AP_VENDOR_TYPE.TYPE_NAME
FROM AP_VENDORS , AP_VENDOR_TYPE
WHERE AP_VENDOR_TYPE.VENDOR_TYPE_ID = AP_VENDORS.TYPE_ID AND
AP_VENDOR_TYPE.TYPE_NAME = = :AP_ENTER_BILL_MASTER.VENDOR_TYPE
what is the problem.
Regards:
Muhammad Nadeem
Dear thanks,
you are right.
i changed as you told and it is ok. but i want to display the type name in the list item. how can i display it?
the record group is based on a query.
populate_list_with_query('ap_enter_bill_master.vendor_type',
'select to_char(vendor_type_id),type_name from ap_vendor_type');
Thanks And Regards:
Muhammad Nadeem
Similar Messages
-
How to find the list of queries containing a Particular Infoobject
Hi all,
I have requirement to find the list of queries and workbooks which contains a Particular Infoobject. Please advice is there any Database table or Programs exists to find..
Thanks in advance
GAMY..Hi,
Thanks for your replies.
I have tried the oprion already..(RSD1 > Type in the name of the InfoObject and from the menu Edit > choose Where Used list.) but no use. It doesn't show the list of queires..It shows only the data targets.
I would like to know is there any table to achieve the requirement.
Thanks in advance
Ganesh(GAMY) -
T.code FEBC: the repport list doesn't contain the report RFEBIT00
Hi All,
when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
But the list doesn't contain the report RFEBIT00..... How to add it to the list?
Thanks
GandalfHi,
Please do coordinate with your technical consultant(ABAP) for the reolution. -
We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.
Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1) -
When I am trying to create an organization in HRMS, and clicking on Type field, it is showing me "Frm-41830: List of values contains no entries". Please suggest me what is the solution
Hi,
Type is one part of Org creation....
Optionally, select an organization type in the Type field.
Organization types do not classify your organization, you use them for reporting purposes only. The type may identify the function an organization performs, such as Administration or Service, or the level of each organization in your enterprise, such as Division, Department or Cost Center. You create the organization types you require by entering values for the Lookup Type ORG_TYPE.
Regards:
Shahzad M. Saleem (mark this answer as helpful if it helps u) -
FRM-41830 :List of values contain Lov After upgrade Form patch set to 19
We are facing the below issue when click on menu,
FRM-41830 :List of values contain Lov After upgrade Form patch set to 19
Please let us know if someone has got similar type of issues.
Regards,Hi,
Please verify that you have completed all the steps in the Developer 6i upgrade doc. Also, please post the complete error message.
Have you tried to regenerate the forms via adadmin and see if it helps?
If none of the above helps, please obtain the FRD file as per (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) and post the contents of the log file here.
Thanks,
Hussein -
How can I delete entries in the list of currently not installed apps
Hi everybody
I use an iPhone 4 on fw 4.3.5 w/ german localisation. When I start the app store on the phone at the top of the update section is an entry purchased apps (or the like, don't know whether the translation is totally correct, but I guess you know what I mean).
Typing on it delivers a list of apps with the choice to display the ones "not on this iphone". This list contains really ALL of what I ever had installed on my mobile.
I would like to remove some entries or rebuild the list with only that apps currently being installed. Does anybody know how to do that? May that be related to the upcoming icloud service? I already did some research but did not find any hints.
Thanks in advance for any ideasHI,
If you're talking about making changes to your Purchase History... You can't...
If you mean Deleting Apps... See here:
How do I remove an application from my device?
Select your device on the left side of the iTunes window.
Click the Applications tab.
Select Sync applications.
Click the Selected applications button.
Deselect the applications you wish to remove.
Click Apply. -
There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida locaMonkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca -
My iCloud contact list does not contain all the contacts listed in my iPhone 5S. If I delete a contact from the phone it instantly deletes it from the iCloud on my PC. But my PC iCloud list is lacking many of the contacts on my phone.
And which account did you enter these contacts in?
On My Mac
or
iCloud? -
Suppressing "No Entry" calendar entry when printing in the list view
How can I go about suppressing the "No Entry" item for a date when printing the whole month in the calendar view? I would prefer to only see printed dates that have an actual entry in them.
Hi Dwayne,
In SharePoint 2013, we could manually create a list for all users. Here are the reference:
Go to Site Settings > People and Groups > SiteMembers
Modify url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=8 to
http://sp/sites/tutu/_layouts/15/people.aspx?MembershipGroupId=0 , now you will see All people in this site.
Change the view to List view, and copy the listview id in the url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=0&View={viewID}
Go to Settings > List settings, copy the list id in the url
http://sitename/_layouts/15/listedit.aspx?List=listeid&Source=....
Now type the address in IE:
http://sitename/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=[LISTID]&View=[VIEWID]&CacheControl , such as
http://sp/sites/tutu/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=f3958d27-9c2f-4f8d-b221-89466e816667&View=696BFDC5-0C6E-4E27-818F-0E6292A18407&CacheControl=1
Save the owssvr.jqy from SharePoint site
Now you could see the file in your desktop with all users, save it as allusers in Excel.
Then import it to your SharePoint site, add an app > find an app > import spreadsheet
Regards,
Rebecca Tu
TechNet Community Support -
How to schedule a WebI Report for the list of users that it contains in it
I have a WebI Report in BOXIr2 which contains the list of Employees Details (Employee Name, Mail ID, Emp Code) who had missed their timesheet for the week, Please let me know Is their a way that i can send mail notification through BO report Scheduling to the list of Employees who are listed in the Report, Thanks in advance !
Hi,
in BO XI 3.1 you can do this using a publication object. Unfortunately in XI R2 this works only for DeskI documents. You may want to consider using the BOE SDK for this. I must admit that I do not have a specific solution for you a workflow may look like this:
1) Schedule your WebI with the user list to be exported on a network drive
2) Build a java program that reads in the file, connects to the BOBJ repository and schedules the report using the recepient list.
Regards,
Stratos -
When creating a new work item, a list of valid users is populated in the 'assigned to' drop down list. When I select one of the listed domain user values, the drop down color changes to yellow and the error 'TF20015...' is shown.
When selecting the user 'Team Foundation Server Service user' instead of one of the domain users, another error is shown. The 'Assigned By' seams to be valid but the 'Changed by' property, which contains my current domain user 'xyz', seams
to be an invalid value.
Error occurs in Team Explorer for VS2008/2010 and Team Web Explorer
Environment: TFS 2010 RC
Does anyone have some tips where to look at?This is the case by default (see below)
<FIELD name="Assigned To"
refname="System.AssignedTo" type="String"
syncnamechanges="true">
<HELPTEXT>The person currently working on this task</HELPTEXT>
<ALLOWEXISTINGVALUE
/>
<ALLOWEDVALUES expanditems="true"
filteritems="excludegroups">
<LISTITEM
value="[project]\Contributors" />
</ALLOWEDVALUES>
</FIELD> -
Input field - entry is not in the list of values
Hi
I have a very strange thing going on in my aPP.
I use an input field to which I attach an on Enter event.
When user presses 'Enter', a pop up window appears with the list of countries.
Selecting a country automatically puts this country into the input field. So far so good.
The problem, however, I am experiencing is in a situation where the user enters a valid value into the input field
without pressing 'Enter' and then continues pressing other buttons in the app. What happens is that the web dynpro framework immediately throws an exception saying the value is not in the set of accepted values.
I do not understand why the system throws such an exception if no set of values has yet been attached to the input field (by ImodifiableValueSet for example).
Any idea?
Thank you
yuval peeryHi
1. In comp controller in wdDoInit I get the list of countries and write them to a local node.
2. This node is mapped to a view in a different window.
3. When I press enter, a pop up window is created. The values mapped from the comp controller to this view are presented to
the user in a nice table.
4. When the user selects a line in the table, the method writes back the value to my input field.
Quite straight forward.
The problem is that when the user enters a valid name into the input field before even pressing "Enter" the framework
returns "entry is not in the set of values".
Frustrating.
regards
yuval -
Number of entries in the list industry sector varies (Transaction MM01)
Hell friends
I have 2 different ECC servers. When I try to create a material using transaction MM01, I see different lists on them.
Both of them were installed recently and so everything available there are standard SAP created data.
When I enter transaction code MM01 and select the list Industry Sector on the first server, I see a huge list starting with AgriculturalServices, AutoRepairServicesParking, BldgMaterialsHWGardenSupp etc. (More than 25 in number).
However, I try the same thing on the second server I see only 5 of them. I am looking for Finished product on this second server and I don't see that, which is a standard industry sector according to what I have read.
Could some one please let me know why this difference and also how to see all the entries in the list?
Your response will be highly appreciated.
Tks
RamHi,
Check table V137 in both servers and also
check ENHANCEMENT patch level of both the servers
Thanks
Diwakar
Maybe you are looking for
-
How to suppress extra form feed for character report printing using ORARRP?
Dear All, We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architectur
-
Need to change the background color of a textview in offline PDF
Hi, We are using the PDFDocument API in order to generate a PDF file which is eventually stored in a network folder. We were initially using the Webdynpro Interactive Form UI element, but digressed from that approach because of some architecture cons
-
Enabling Network Services not working PLEASE HELP
Hello, I created a virtual machine with the Oracle_Developer_Day.ova file downloaded from oracle page in order to test the application express tool. I´m trying to ad a webservice reference but getting the error: ORA-29273: HTTP request failed ORA-065
-
When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get
-
Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.
Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rota