FRM-9201 A failure has occured on server - Oracle forms error Oracle 9IAS

Hi,
We have a custom based Oracle Forms application running in Oracle9IAS in AIX5.1 Box. Last week There was A patch applied to AIX box [Security Patch LIBC] and after that, we are experiencing numerous issues like 1. process full, 2. too many open connections 3.Failiure occurred in server need to restart the session.
When we do a ps -ef in the server, we see lot of threads like "f90runm server webfile=HTTP-0 ". We remember, this was not the situation before applying the patch. When this count reaches approximately 260, users are not able to login and getting error. We dont have concurrent users more than 100. Can you please advise us how to resolve this problem. This application is running in the same environment for last 3 years without any problem, but after applying patch to UNIX box, it seems everything disturbed.

More Error details:-
FRM-92101 A failure has occured on the Server
you will need to reestablish your session
Details
Java Exception
oracle forms net ConnectorException the process file table is full
at oracle.forms.net.HTTPNStream.getinfoFromServlet(Unknown Source)
at oracle.forms.net.HTTPNStream.<init (unknown source)
at oracle.forms.net.HTTconnection.conenct(unknown source)
at oracle.forms.engine.FormsDispatcher initConnection(unknown source)
at oracle.forms.engine Forms Dispatcher init(unknown source)
at oracle.forms.engine.Runform.initConenction(unknown source)
at oracle.forms.engine.main.createRunform(unknown source)
at oracle.forms.engine.main.start(unknown source)
at sun.applet.Aplet panelrun(unknown source)
at java.lang.thread.run(unknown source)

Similar Messages

FRM-92102: A network error or server failure has occurred.

Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
Reem

re**** wrote:
Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
ReemCan you reproduce the issue using a different browser or from a different machine?
Please contact "Solution Beacon" support since we don't maintain their environments.
Thanks,
Hussein

FRM-92103: A network error or server failure has occurred.

Hello,
I always get this error after everytime i run a report my forms getting crash.
heres the jre console error :
Java Plug-in 1.6.0_33
Using JRE version 1.6.0_33-b05 Java HotSpot(TM) Client VM
User home directory = C:\Users\charles
Forms Session ID is formsapp.2
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92103: A network error or server failure has occurred.
You will need to restart your application.
Java Exception:
java.io.IOException: Server returned HTTP response code: 503 for URL: http://application:8888/forms/lservlet;jsessionid=yjc6QfjGNkr8fjlyD26fZjqmwBGKkGVgG1L7s91X8y6rBsgGl650!-1255936909
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at oracle.forms.net.HTTPNStream.doPost(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
the http ohs1 server always hang i need to restart it again.
any help?

Michael Ferrante (Oracle) wrote:
I'm sorry, but I'm having a difficult time understand what you are saying...
What do you mean here? "... +if the forms run first then the report will not run it gives always this error+ ..." Are you loading the report results in the same browser that is running the form?
this will be the problem i should posted :
*2.1 Oracle HTTP Server Returns 503 Apache Bridge Failure Error While Toggling Between Forms and Reports*
While toggling between Oracle Forms and Oracle Reports applications through Oracle HTTP Server, you may see the "503 Apache Bridge failure" error. This is due to the wrong patch 12632886 being shipped with the Oracle Forms and Reports installer.
This document found in : http://docs.oracle.com/cd/E24269_01/doc.11120/e25445/install_upgrade.htm#BABHBABB
for those with oraclesupport find the document subject : Forms / Reports 11g Intermittent FRM-92103 Or "Failure of Server APACHE Bridge" - OHS Log Shows "apr_socket_connect call failed" [ID 1380762.1]
I downloaded the patch from
OPatch 12632886 (OHS-WLS COMMUNICATION NOT WORKING ON IPV6 ENABLED SOLARIS M/C [Patch ID 14069292]) for your Windows Platform from My Oracle Support
i successfully patched now its working.
thank you for your patience and help..
Edited by: ck on Aug 7, 2012 3:41 AM

#550 4.4.7 QUEUE.Expired; message expired ## With LastError "A storage transient failure has occurred during content conversion." In submission Queue. (Exchange 2013)

Greetings,
We seem to be having a problem with some users who are attempting to send e-mails from within the organisation to an external domain. Not all users are affected, and not all outgoing e-mails have this issue.
Some e-mails get stuck in the submission queue. This is the error message in Last Error : "A storage transient failure has occurred during content conversion."
Days later, the internal user who send the message gets a #550 4.4.7 QUEUE.Expired; message expired ## NDR.
We did have some initial configuration issues, but these were fixed more than a week ago :
- The external FQDN during EHLO was set to the wrong address, now pointing to the correct one.
- SPF record was updated with new IP adress.
Here is some additional information on the issue :
- Not on any blacklists - checked using dnsbl.info
- Telnet to remote servers works from exchange server, connections are accepted and can send mail.
- Outbound SMTP test ran using Microsoft Remote Connectivity Analyser : Passed with both External (Static) and Smarthost IP.
- This seems to happen only with emails that have an attachment and that are transfered, but only for the affected users.
- If content from these e-mails is manually copied over to a new email, email is sent to destination without problem.
Configuration information :
- Exchange 2013 running on Windows 2012 Datacenter with all latest updates.
- Outgoing e-mail is sent via smarthost. Only one outbound transport rule is active.
- Using internal DNS server.
- There is only one mailbox database.
Thank you for taking the time to read this!

On Wed, 16 Jan 2013 15:31:14 +0000, Ipigi wrote:
>Sorry, I often get some terms mixed up when I explain things as our users use the French version of outlook.
>
>E-mails are not transferred, but forwarded manually from their outlook. Message format in outlook is set to HTML and not Rich Text when they foward the e-mail.
Do they forward the message as an attachment?
>When forwarded internally, this is in the internet headers :
>
>Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary
Within your organization I'm prety sure that messages will use TNEF.
What does the message contain at the external recipient's side?
>It really seems to me that Exchange is not converting RTF to Plain Text. The first link you provided states in it's final paragraph that Exchange should be doing this conversion.
If you can, try creating a mail-enabed Contact for one of the external
recipients and set the message format on that.
>If I disabled TNEF as that link suggests, offending messages will get stuck in the submission queue again.
>
>I thank you for your help so far. This is not an issue I've had with any previous installations/migrations of Exchange that I have done.
>
>Please let me know if you need any additional information.
Have you tried UNsetting TNEF on the remote domain?
Set-RemoteDomain Default -TNEFEnabled $null
That should leave it up to the client to determine the format. It's
probably not what you're after, but see it makes a difference in the
format.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

A storage transient failure has occurred during content conversion

Hi,
I have Exchange 2010 SP3 installed on Windows server 2012.
External invites are not processing, and return with Source Contex "StorageTransientFailureDuringContentConversion".
This is cause a great problem in our enviroment...
Some suggests?
Att
Paulo Nunes

What version of Exchange 2010 SP3 do you have? RU4 for Exchange 2010 SP3 has been released -
KB2905616 .
RU3 is supposed to fix this particular issue, RU4 includes that fix as well.
Previous support forum question on this -
http://social.technet.microsoft.com/Forums/en-US/fd7ef80e-f80b-47ed-883b-a34511c6233c/a-storage-transient-failure-has-occurred-during-content-conversion?forum=exchangesvrsecuremessaginglegacy
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

A bluetooth serial failure has occurred?

Hi,
After playing around for a while, I finally got my Nokia N82 to work as a modem on my MacBook Pro using scripts from http://www.taniwha.org.uk
But after 30mins online I was disconnected and now if I try to connect again I get the following dialogue:
A bluetooth serial failure has occurred.
Failed to open an RFCOMM serial channel. Check if authentication needs to be enabled in your device.
The only thing I understand about this is the authentication part. My phone is set to automatically allow all connections from my computer.
Any idea what is going on?
Any help is appreciated.

I'll take a shot. Who is your cell phone provider? Did you look at the modem scripts in /Library/Modem\ Scripts for Nokia one(s). There are some. Possibly generic that would work. To make this simple, since it is late, #1 here is system log of my Panther and LG phone using one of above mentioned scripts.#2 And the link is an older one about doing the same type connection and the problems with Verizon. But then I never had same error message you got. I searched on that error and it appears that rfcomm can loop and the way to fix that is to bind to more channels which I am not sure how, since the only thing to change , it appears is in bluetooth preferences. I would not touch that, yet. The problem on configs, I believe, is the property is propriotory(spelling?). Or the channel is in the phone settings. Anyway I would try a different modem script in the Library and also check out the other links in #2.
#1
16 01:51:19 localhost pppd[6009]: Sent 14395 bytes, received 83280 bytes.
Oct 16 01:51:21 localhost pppd[6009]: Exit.
Oct 16 01:51:46 localhost pppd[6050]: pppd 2.4.2b1 started by root, uid 0
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Starting Apple Verizon Support CCL
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Connecting to Network
Oct 16 01:51:49 localhost pppd[6050]: Serial connection established.
Oct 16 01:51:49 localhost pppd[6050]: Using interface ppp0
Oct 16 01:51:49 localhost pppd[6050]: Connect: ppp0 <--> /dev/cu.usbmodem3B11
Oct 16 01:51:51 localhost pppd[6050]: local IP address 70.193.4.227
Oct 16 01:51:51 localhost pppd[6050]: remote IP address 66.174.27.4
Oct 16 01:51:51 localhost pppd[6050]: primary DNS address 66.174.92.14
Oct 16 01:51:51 localhost pppd[6050]: secondary DNS address 66.174.95.44
Oct 16 01:51:51 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:51:51 localhost mach_init[2]: Server 2227 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6030]
Oct 16 01:51:51 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:51:51 localhost lookupd[6053]: lookupd (version 324.13) starting - Thu Oct 16 01:51:51 2008
Oct 16 01:51:52 localhost set-hostname[6063]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:28 localhost pppd[6050]: Terminating on signal 15.
Oct 16 01:53:28 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:53:28 localhost mach_init[2]: Server 2233 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6053]
Oct 16 01:53:28 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:53:28 localhost pppd[6050]: Connection terminated.
Oct 16 01:53:28 localhost pppd[6050]: Connect time 1.7 minutes.
Oct 16 01:53:28 localhost pppd[6050]: Sent 6407 bytes, received 45234 bytes.
Oct 16 01:53:28 localhost lookupd[6067]: lookupd (version 324.13) starting - Thu Oct 16 01:53:28 2008
Oct 16 01:53:29 localhost set-hostname[6081]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:32 localhost pppd[6050]: Serial link disconnected.
Oct 16 01:53:33 localhost pppd[6050]: Exit.
#2 http://discussions.apple.com/thread.jspa?threadID=1691464&tstart=15

TS4002 iCloud will not send to yahoo email addresses, and is stating SMTP transmission failure has occurred. Can anyone help ?

Hi, iCloud will not let me send mail to some yahoo accounts, stating SMTP transmission failure has occurred. Can anyone help ?.

Try two things
1. try to send mail from icloud.com - by that we eliminate possible problem on your device.
2. Sending mail to the same yahoo address from other email - that way we can eliminate or pinpoint problem with icloud smtp server. ( for that one you will have to give it a few hours, cause another server may give you delayed failure.)

HELP: SMTP transmission failure has occurred

Hi there,
i would like to know what the following message means, because i dont know its because of my email or because of the recipient server.
This report relates to a message you sent with the following header fields:
Message-id: <[email protected]>
Date: Sun, 30 Jun 2013 14:19:42 +0000 (GMT)
From: Nick Pijl <[email protected]>
To: [email protected]
Subject: Vacature Commerciele vormgever
Your message cannot be delivered to the following recipients:
Recipient address: [email protected]
Reason: SMTP transmission failure has occurred
Diagnostic code: smtp;550 Date header far in the past/future.
Remote system: dns;smtp02.mx.p-client.net (TCP|17.172.220.238|64638|109.106.179.55|25) (smtp04.mail.provider.nl ESMTP Exim 4.80.1-56402 Mon, 10 Jun 2013 16:19:48 +0200)
Thanks in advance

Hi, their server seems fine, at least now, is your Date/Time & timezone set correctly?
SMTP session
[Resolving smtp01.mx.p-client.net...]
[Contacting smtp01.mx.p-client.net [109.106.179.56]...]
[Connected]
220 smtp04.mail.provider.nl ESMTP Exim 4.80.1-56402 Mon, 10 Jun 2013 19:47:56 +0200
EHLO Network-Tools.com
250-smtp04.mail.provider.nl Hello Network-Tools.com [67.222.132.205]
250-SIZE
250-8BITMIME
250-STARTTLS
250 HELP
VRFY info
252 Administrative prohibition
RSET
250 Reset OK
EXPN info
550 Administrative prohibition
RSET
250 Reset OK
MAIL FROM:<[email protected]>
250 OK
RCPT TO:<[email protected]>
250 Accepted
RSET
250 Reset OK
QUIT
221 smtp04.mail.provider.nl closing connection
[Connection closed]

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do?

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?

TS4002 SMTP transmission failure has occurred this happened somehow overnight since I received in coming mail last evening.

I'm not able to receive any mail today. I could last night. I have changed no settings. Help/

Thanks for your prompt response. I can't receive mail. I can send only. I was receiving OK the previous night, Sunday, April 6th. But yesterday, Monday April 7th messages were kicked back to senders as undeliverable. I sent to several emails from another email address to dnjames and those "test " messages were met with the below info:
This report relates to a message you sent with the following header fields:
Message-id: <[email protected]>
Date: Tue, 08 Apr 2014 06:30:18 -0700 (PDT)
From: david james <dnjames1940>
To: David James <dnjames>
Subject: xxx
Your message cannot be delivered to the following recipients:
Recipient address: dnjames1940
Original address: dnjames
Reason: SMTP transmission failure has occurred
Diagnostic code: smtp;554 5.7.9 Message not accepted for policy reasons. See http://postmaster.yahoo.com/errors/postmaster-28.html
Remote system: dns;mta5.am0.yahoodns.net (TCP|17.158.236.237|60512|63.250.192.46|25) (mta1679.mail.gq1.yahoo.com ESMTP ready)
<Email Edited by Host>

Adobe CS4 won't open "An unexpected and unrecoverable problem has occurred because of a disk error.

Photoshop CS4 will not open, when I try and open it I get "An unexpected and unrecoverable problem has occurred because of a disk error. Photoshop will now exit." Bridge is working fine?

No reset window came up it get's as far as initializing and then this window comes up

Handling oracle forms errors (frm-nnnnn) locally

is there a way to handle an oracle form error (e.g. frm-40508) locally in a way similar to handle oracle database errors.
e.g.
procedure insert_something is
insert_error exception;
pragma exception_init(insert_error,-40508);
begin
:c1.a := 1;
:c1.b := 2;
commit_form;
exception
when insert_error then
<handle insert error on c1 block>;
end;
Edited by: mojo on Oct 7, 2008 4:34 AM

by locally i mean within the pl/sql block that will have raised the error.
an example i encoutnered recently, but by no means the only occasion i have wished such things:
function mseRecStatus returnvarchar2 is
rtnChar varchar2(32);
begin
rtnChar := get_record_property(mouseRec,mouseBlock,status);
return rtnChar;
end;
This is called from a pre-pop-menu trigger. mouseRec and block are calculated previously. A right-click on a record item below the last record raises error frm-40741 (unable to locate record on block). it would be nice to be able to do something like the following without incolving an on-error trigger:
function mseRecStatus returnvarchar2 is
rtnChar varchar2(32);
non_record_clicked exception;
pragma exception_init(non_record_clicked,-40741);
begin
rtnChar := get_record_property(mouseRec,mouseBlock,status);
return rtnChar;
exception
when non_record_clicked then
return null;
end;

An Unknown Error Has Occurred - Project Server 2010 - Tasks Page

Greetings!   Some of my resources are recieving the error "An Unknown Error has occurred" (in red) when trying to access their TASKS Page in Project Server 2010.
I've researched this error quite a bit and am finding suggestions and answers pretty much all over the board.    Before I have my server people start installing a slew of hot fixes - I want to know if anyone has an idea of the underlying cause
for this error.    Since this issue doesn't affect everyone (i.e. I can access my task page), is it possibly related to the actual schedule in which they have assignments?
Any help is appreciated.
Thanks!
~Randy

i have found the solution for this issue, you need to do this:
in the logs you must search the "exception" and the logs give you a ID, this ID is about the task assignment in the specific resource , so this assignment is corrupt.
this ID, you need to merge in the SQL server in the project server database, you need to merge ID task with ID Project with ID Resource, so when you identify the ID project and ID resource you can
DELETE this assignment in the project from project profesional, because this task has a corrupt assignment, you must delete
ONLY FROM project professional.
This solutión solve this specific problem for this assignment that
IS DIFERENT TO THIS SOLUTION post of Brian Smith:
http://blogs.msdn.com/b/brismith/archive/2010/07/02/project-server-2010-an-unknown-error-has-occurred-in-project-center-resource-center-or-tasks.aspx?Redirected=true
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Not able to start report server component, getting error : oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

[2014-06-03T14:16:13.257+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [tid: 18] [userId: <anonymous>] [ecid: 0000KPXe7kGFk3S6yFaeMG1JZR_f00000G,0:1] [APP: reports#11.1.2] ServerManager:getServer Bind to Reports Server rep_wls_reports_xyz_asinst_1 failed.
[2014-06-03T14:16:13.258+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-51002] [oracle.reports.servlet] [tid: 18] [userId: <anonymous>] [ecid: 0000KPXe7kGFk3S6yFaeMG1JZR_f00000G,0:1] [APP: reports#11.1.2] REP-51002 : Bind to Reports Server rep_wls_reports_xyz_asinst_1 failed. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
at oracle.reports.client.ServerManager.getServer(ServerManager.java:284)
at oracle.reports.client.ServerManager.isSecure(ServerManager.java:420)
at oracle.reports.client.ServerManager.isSecure(ServerManager.java:405)
at oracle.reports.rwclient.CommandManager.getServerSecuritySetting(CommandManager.java:347)
at oracle.reports.rwclient.ServletCmdMgr.handleWebCommand(ServletCmdMgr.java:319)
at oracle.reports.rwclient.RWClient.handleWebCommand(RWClient.java:1302)
at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1822)
at oracle.reports.rwclient.RWClient.doPost(RWClient.java:780)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3748)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3714)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2283)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1491)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Hi,
Please review following note:How to Troubleshoot Errors FRM-41213 / REP-51002 / REP-178 with Oracle Reports 10gR2 / 11g (Doc ID 460976.1)
Regards,

FRM-9201 A failure has occured on server - Oracle forms error Oracle 9IAS

Similar Messages

Maybe you are looking for