FRM-92050: Failed to connect to Server: /forms/lservlet-1 coming thru LBR

Hi,
Our EBS setup is as follows,
R12.1.1,
10g DB, 10.2.0.4 (patchset)
Sun Solaris 10 64 bit
Two node Apps Tier (AppServer1 and AppServer2) in a shared APPL_TOP.
and Two node RAC Database Tier (DBNode1 and DBNode2)
Highly secured and firewall environments.
We configured EBS R12 and we were able to login and launch forms , Submit conncurrent jobs and everythings worked fine.
http://hostname.domainname:8000
Now , our requirement is that all the users would be accessing our EBS through https and the flow is as follows,
Step1:
User => https://lbrname.domainname:443
here lbrname is our Load Balancer name. Here the request is identified as EBS request and LBR forwards that URL to our reverse proxy server
Step2:
Our reverse proxy server is Sun http web server 7 update 5. It converts it to http://hostname.domainname:8000 and offloads it to the apps tier.
We followed metalink note 380489.1 - Using Load-Balancers with Oracle E-Business Suite Release 12 to configure our EBS with load balancer .
(Section 2.1: Using Hardware Load Balancers with Single Web Entry Point).
After configuring we are able to login to the EBS URL using https://lbrname.domainname:443.
Now here is our problem,
When trying to launch any form , it gives the below error.
FRM-92050: Failed to connect to Server: /forms/lservlet-1
not sure how to proceed. Looked at google , metalink but not getting anywhere.
Can you please give some pointers as how to solve this problem ?
Thanks,
Sasi

Hi Helios,
Thank you very much for your time.
Metalink ID 438522.1 & 367614.1 doesnt apply to our environment.
I had looked at 470890.1 and it looked like we are ok but I'm going to double check on that.
FRM-92050: Failed to connect to Server: /forms/lservlet:-1 http://ID 470890.1
On the laodbalancer (Big IP) i need to check with our network team.
FRM-92050: Failed To Connect To Server: /forms/lservlet:-1 http://ID 793409.1
Thanks again.
Sasi

Similar Messages

ORACLE Forms Run Time error FRM -92050 failed to connect to server

server name:
osfsun.oklaXXX:9000
Details:
Java Exception
Java.netNoRouteToHostException: operation timed out
at java.net.plainsocketImpl.doConnect(Compiled Code)
at java.net.plainsocketImpl.connectToAddress(plainsocketImpl:124)
There is more....
I have opened the port 9000 in my LAN firewall, I have checked Jinitiator control panel, I'm able to resolve web address but receive this web run time error,.anyhelp would be appreaciated.
thanks

I resolved this issue. It was related to the firewall using port 9000/ The issue was not related to Oracle.

Unable to open forms in R12 and getting FRM-92050 failed to connect server

Hi ,
When i trying to open forms in R12 instance i am getting the error like this
FRM-92050 unable to connect to server :/forms/servlet :-1.
please help to check
thanks
balu

Hi Balu;
Please check below and see its helpful for your issue:
Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx [ID 189867.1]
FRM-92050 / FRM-92060 When Invoking a Second Forms Session in a New IE Browser Window [ID 251915.1]
Regard
Helios

FRM-92050 Error in connect into server

Hi all
I have question :
I try To Deploy my oracle forms Over The internet I use for that Forms server 6i And when I try to Display the form from the browser It give me this Error :
Frm-92050: failed to connect to the server. <servername:port>
please : help me , I want to Know ,What is the problems ?
and If any one have another way to deploy me project over the web please , Give me it
waiting answers

Try using the following documents from Metalink to try and help determine your problem:
189867.1
444690.1
Can you ping your server from your client? e.g. ping prod1
If so, can you run a IE session and try http://servername.domainname:port e.g. http://prod1.gov.uk:7778

FRM:92050:failed to connect to the server :/forms90/i90servelet-1..it often

..it often appears in production environment.Please guide me if any services/parameters need to be properly set or where the actual problem resides.Often i get call
saying the users are not able to accesss the application and we use to stop and start the appsvr.

There could be various sources for this error.
Refer to Forms Developer Help for this error message or search in MataLink for FRM-92050
Edited by: user434854 on Nov 26, 2008 5:42 AM

FRM-92050 error when trying to open form after switching to HTTP mode

Hi all,
Yesterday, I installed Oracle Applications 11i on Red Hat Enterprise Linux ES 4 and forms were working correctly in the default mode, which is native (socket). Following steps 4 and 5 in [Doc 201340.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6398415066875997204::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,201340.1,1,1,1,helvetica], I enabled HTTP mode, and now my forms are not working. When I open a form now, I get this error:
FRM-92050: Failed to connect to the Server: /forms/formservlet:-1
Details...
Java Exception:
java.io.IOException: Negative content-length from http://...
I've searched MetaLink and the forums for this error and all the results I found deal with HTTP headers or cookies being corrupted, usually by an intermediate networking device (web proxy, web cache, SSL accelerator, etc.). I am not using anything of the sort - the client is connecting directly to the Oracle server.
I checked the Apache error log and this is what I see:
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/portal/VIS_gen1-cs49/forms/formservlet
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
I don't like the look of those "client denied by server configuration" messages. What's also odd is that the two files referenced by those messages do not exist on the file system:
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/java
cat: /work/oracle/viscomn/java/java: No such file or directory
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/oracle/ewt
cat: /work/oracle/viscomn/java/oracle/ewt: No such file or directory
Any ideas? Are there any other logfiles I should be checking?

First, login to System Administrator responsibility, then navigate to Concurrent > Manager > Administer > Processes > Internal Manager LogAh, OK - I was able to open the form and I see a table of managers and services and whatnot, and I see an entry for "Internal Manager", but I don't see any way to view the log. I even tried opening the details of the "Internal Manager" entry and the only button there is "Diagnostics".
Search for VIS_*.mgr -- Sorry for the typo!Ah, that would explain it. Here are the contents of the correct logfile:
[oracle@gen1-cs49 VIS_gen1-cs49]$ cat VIS_0514.mgr
========================================================================
Starting VIS_0514@VIS Internal Concurrent Manager -- shell process ID 4314
logfile=/work/oracle/viscomn/admin/log/VIS_gen1-cs49/VIS_0514.mgr
PRINTER=noprint
mailto=oracle
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 14-MAY-2009 11:06:48 -
Shutting down Internal Concurrent Manager : 14-MAY-2009 11:06:48
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The VIS_0514@VIS internal concurrent manager has terminated with status 1 - giving up.

FRM-99999: Failed to connect to the Server / UNIX

Upon invoking
http://hostname.domainname:1080/web_html/olftest.htm
I am getting the following error:
FRM-99999: Failed to connect to the Server:
hostname.domainname:9000
We are using the following:
=========================
Server:
Unix : Sun Solaris 2.5.1
Oracle Application Server 4.0.7 and Oracle Developer 6 Server
are on the same machine
Oracle Server 8.0.5
Client machine:
Windows NT 4 Workstation with SP3,
Internet Explorer 4.0.1 SP1 with Jinitiator - 1.1.7.11
We tried following commands to get the Developer 6 Server up and
running on port 9000 under Unix:
$ f60ctl start port=9000
port=9000
Choosing default pool 1 for this process...
1
Forms environment:
ORACLE_HOME = /opt/oracle/805
PATH =
/opt/oracle/805/bin:/opt/oracle/805/ows/4.0/bin:/opt/oracle/805/o
rb/4.0/admin/cgi:/opt/oracle/805/orb/4.0/bin:/opt/oracle/805/ots/
1.0/bin:/opt/oracle/805/ows/4.0/jdk/bin:/opt/oracle/805/bin:/usr/
bin:/usr/ucb:/usr/ccs/bin:/etc:/usr/sbin:/usr/openwin/bin:/usr/lo
cal/bin:/opt/oracle/805/bin:/opt/bin:/usr/ccp/bin
LD_LIBRARY_PATH =
/opt/oracle/805/lib:/opt/oracle/805/orb/4.0/lib:/opt/oracle/805/o
ws/4.0/lib:/opt/oracle/805/ots/1.0/lib:/opt/oracle/805/lib:/opt/o
racle/805/lib:/usr/x11r5/lib:/usr/openwin/lib
FORMS60_PATH = /opt/oracle/805/forms60/html:
Forms listener started on port 9000.
$ f60webm
$ f60srvm
Failed to bind Launcher to port 9000
A Developer 6 Server under Windows NT is working fine.
The Windows NT 4 workstation contains registry settings
corresponding to this previous Developer Forms Server 6
configuration on Windows NT. We configured the Developer 6
Server under Windows NT using the tutorial in %
ORACLE_HOME%/tools/devdem60/web/readme.htm.
From a discussion with the Unix DBA team we concluded that this
tutorial is Windows NT specific.
Does anyone happen to have a tutorial on deploying Oracle Forms
to the Web specifically for Developer 6 Server and OAS4 under
UNIX.
Which Unix Developer 6 Server environment variables do I have to
set under Unix for deployment of forms 6.0 on the web?.
olftest.htm
<HTML>
<HEAD>
<TITLE>Oracle Developer Server and Oracle JInitiator</TITLE>
<X-CLARIS-WINDOW TOP=25 BOTTOM=608 LEFT=4 RIGHT=927>
</HEAD>
<BODY BGCOLOR="#FFFFFF" BACKGROUND="web_bkgd.jpg">
<TABLE BORDER=0>
<TR>
<TD WIDTH=234>
<IMG SRC="web_anim.gif" WIDTH=230 HEIGHT=300
ALIGN=bottom></P>
</TD>
<TD>
<OBJECT classid="clsid:9F77a997-F0F3-11d1-9195-
00C04FC990DC"
WIDTH=700
HEIGHT=550
codebase="http://hostname.domainname:1080/web_html/Jinit.exe#Vers
ion=1,1,7,11">
<PARAM NAME="CODE"
VALUE="oracle.forms.engine.Main" >
<PARAM NAME="CODEBASE" VALUE="/web_code/"
<PARAM NAME="ARCHIVE" VALUE="f60all.jar" >
<PARAM NAME="type"
VALUE="application/x-jinit-applet;version=1.1.7.11">
<PARAM NAME="serverPort" VALUE="9000">
<PARAM NAME="serverArgs"
VALUE="module=/opt/oracle/805/tools/devdem60/web/start60.fmx
userid=scott/tiger">
<PARAM NAME="serverApp" VALUE="default">
<COMMENT>
<EMBED SRC="""
PLUGINSPAGE="http:/hostname:1080/web_html/jinit_download.htm"
WIDTH=700
HEIGHT=550
type="application/x-jinit-
applet;version=1.1.7.11"
java_code="oracle.forms.engine.Main"
java_codebase="/web_code/"
java_archive="f60all.jar"
lookAndFeel="oracle"
colorScheme="teal"
serverport="9000"
serverargs="module=start60.fmx
userid=scott/tiger"
serverapp=default>
<NOEMBED>
</COMMENT>
</NOEMBED></EMBED>
</OBJECT>
</P>
</TD>
</TR>
</TABLE>
</P>
</BODY>
</HTML>
Any help on this issue will be greatly appreciated,
Erik
null

"NoRouteToHostException" => This looks like routing issues through the proxy server.
You can involve network admin to take care of the settings at proxy , to allow connections through the proxy server.
Cheers
Rahul

Publishing error (failed to connect to server)

Using X5, I am trying to publish to our help server (web help
pro), but getting a message in the output window "Warining: Failed
to publish to 'yourserver'. reason: Failed to connect to server.
All my permissions are set up as described here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_e01
So... I ran a packet sniffer and then tried to publish
again... and saw that the publisher attempts to access
http://yourserver/robo/robo.dll?mgr=sys&cmd=svr
When I try to access this address in a browser, I get a 401 error
with the message below.
+----------------------------------------------------------------------------------------- ----
|Server: unauthorized
|Unauthorized due to ACL on resource
|
|This error indicates that the credentials passed by the
client do not have access to the particular resource on the server.
This |resource could be either the page or file listed in the
address line of the client, or it could be another file on the
server that is |needed to process the file listed on the address
line of the client.
|
|Please make a note of the entire address you were trying to
access and then contact the Web server's administrator to verify
|that you have permission to access the requested resource.
+--------------------------------------------------------------------------------------
However, if I try to access that address _on_ the server (
http://localhost/....) I get some
nice XML:
+--------------------------------------------------------------------------
|
|<?xml version="1.0" ?>
|- <mrs xmlns="
http://www.ehelp.com/mrs/xml/serverinfo/">
|- <head>
| <url host="localhost" ip="127.0.0.1" version="4.00.083"
/>
| <publish type="httppost"
script="/robo/bin/WPSHost.dll?PUBLISH" />
| <serverapi url="
http://localhost/RoboAPI.asp"
/>
| <admin url="
http://localhost/robo/Admin/"
/>
| <projects url="
http://localhost/robo/Projects/"
type="httppost" script="/robo/bin/WPSHost.dll?PUBLISH" />
| <documents url="
http://localhost/robo/Documents/"
/>
| <reports url="
http://localhost/robo/Reports/"
/>
| </head>
| </mrs>
+--------------------------------------------------------------------------
I can not seem to figure out what ACL is incorrect. I tried
running process monitor (from winternals), and did not see anything
helpful. The IIS www worker process seems to access all the robo
files/registry without error.
Has anyone else had this problem? Can I get some guidance on
how to resolve? We are about to purchase support incidents, but the
sooner I can resolve, the better.
Any help appreciated. thanks,
ajperrins

I'm afraid I won't be of much help except to say that this is
a classic permissions issue. I have to assume you've checked and
double-checked the link referred to in your post (which is a good
one).
You might also try this technote:
Publishing
to RoboEngine
In helping others troubleshoot this, it sometimes turns out
that there are firewall issues that are not obvious especially if
you are in a large organization crossing many domains from author
to server. Are you the ultimate "server admin" or is there someone
in your organization's network admnistration who could help resolve
the permission issue?
Sorry I can't be of immediate help.
john

Hyperion Financial Reporting Studio "Failed to Connect to Server"

One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
We've searched help documentation and other threads in this forum but haven't been able to find what we need.
We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
Thanks.

We had the same issue after installing the Financial Reporting Studio client.
If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

Sync always fails to connect to server with no reason

On two of my computers (both Macs running 10.6.7, one a MacBook Air and one an older iMac), Sync fails, saying "failed to connect to server"
When I try again (and again, and again...) it results in the same message. It has synced successfully in the past, but has not in more than a week.
I can't figure out how to get it to sync or even how to get more information about the issue.
Any help, ideas or suggestions - including questions clarifying or detailing the issue - are welcome.
Thank you!!

If Oracle reports error about Net8 configuration, that means -
you're trying to use "thick" JDBC driver, though usual way
is to use "thin" driver instead. You have to make corrections
in your connect url like:
"jdbc:oracle:thin:@<host>:<port>:<sid>"
^^^^
look here-----|
Hope this will help
Paul

Sometimes JBoss fails to connect to server.

JBoss does not connect all the times during server re-boot. The errors on the log are listed below. It looks like the ports are in use, but re-starting the JBoss service or the server will resolve the connection issue. This problem does not occur all the times. Sometimes JBoss starts without any problem. This is a Windows Server 2003 and SQL 2005 environment.
Caused by: javax.naming.CommunicationException: Failed to connect to server 0.0.0.0:1100 [Root exception is javax.naming.ServiceUnavailableException: Failed to connect to server 0.0.0.0:1100 [Root exception is java.net.ConnectException: Connection refused: connect]]
            at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:254)
            at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1370)
            ... 162 more
What could be the problem? Thank you,

To change the ports, stop JBoss and change the ports on the file listed below. Start JBoss.
C:\adobe\Adobe LiveCycle ES2\jboss4.2.1\server\dev\deploy\adobe-ds.xml

Failed to connect to server "%MACHINENAME%

Hi;
I have problem with opening report with crystal report 2013 EOM , i got this strange exception I have google it and didnt find any helpful data
"Failed to connect to server "%MACHINENAME%".Error returned from Windows Sockets API getaddrinfo: 11001."
i am using this code
tempFilePath += "Evaluators Trend.rpt";
            ReportClientDocumentClass crystalReport = new ReportClientDocumentClass();
            object path = (object)tempFilePath;
            crystalReport.Open(ref path, 0);
can you please advice how can i avoid this issue .
Thanks ,
Fade Ismaeel

Hi,
Could you try below code and see if you face the same issue?
CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument boReportClientDocument;
boReportClientDocument= new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
boReportClientDocument.ReportAppServer = System.Environment.MachineName;
object path= @"C:\Reports\World Sales Report.rpt";
boReportClientDocument.Open(ref path, 0);
CrystalReportViewer1.ReportSource= boReportClientDocument;
You would need to set the RAS server which will be processing your request. Above code works when executed on the same machine as CRSE is installed. You could also use the IP address of the machine (instead of "System.Environment.MachineName") where the RAS is installed.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

TS2755 In outlook, I keep getting message, "cannot get mail. The connection to the server failed." However, the mail seems to be coming thru just fine. What's going on?

In outlook, I keep getting message, "cannot get mail. The connection to the server failed." However, the mail seems to be coming thru just fine. What's going on?

Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
 Cheers, Tom

Multiple errors from MsiInstaller with event id 1015 and text "Failed to connect to server. Error: 0x80070005"

Hi,
Every night I get a lot of warnings in the event log from MsiInstaller with event ID 1015 and text "Failed to connect to server. Error: 0x80070005". They are always followed by a new event 1035. Example:
Event 1015, MsiInstaller (Warning)
Failed to connect to server. Error: 0x80070005
Event 1035, MsiInstaller (Information)
Windows Installer reconfigured the product. Product Name: Microsoft Excel Mobile Viewer Components. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
I probably get around 50 of these each night, and the 1035 events are all related to various SharePoint components. The user in all cases is the sharepoint farm account.
I use SharePoint 2010 enterprise in a farm install on one virtual server. I have a private domain, and the database is on a separate server.
Does anyone have any idea why this happens? Other than the error in the event log I cannot see any issues with my installation. I have searched for this error and seen it related to user profile synchronisation, but profile sync is working fine for me. I
installed using the Technet guide and the user profile sync guide at
http://www.harbar.net/articles/sp2010ups.aspx
Thanks,
Mikael

Hey Trevor. Thanks. I wasn't sure which method it was failing on although I understood it was the Windows Installer Service that was getting called by the job. There are three things that are still interesting to me though:
The job succeeds anyway. How? Does it just continue to run the rest of its checks but fails on this one? If it doesn't fail on this one, why not? If it does fail here, but then continues, should we be concerned about the quality of the data in Manage Patch
Status?
Or... does it somehow succeed once it uses the DCOM rights which appear to clear the 10016 errors? What I've never been able to reconcile with these warnings is that we've granted DCOM rights to launch and activate the Windows Installer Service and
that definitely seems to make a difference to success or failure of the job - so why doesn't it clear these warnings?
Why does granting the file system permissions clear the FIM version of this job's warnings, but not for the Product Version Job? This is particularly vexing since granting the DCOM rights appears to resolve the 10016 errors in exactly the same manner for
both jobs.
All of this has led me to believe that there were missing permissions somewhere, probably on the file system, but I just haven't had any luck pinning that down. One reason why I continued to pursue a solution to this is that the job doesn't actually try
to install anything, it's just trying to use the Windows Installer Service to query the installed version, and the DCOM rights should be sufficient to invoke the service. But getting much further than this has proven pretty difficult since I'm not a dev and
I've kind of pushed my limited reflection skills and understanding of the Windows Installer Service to the limit. If anyone can chip in and make some progress from this point, it'd be great to join forces!

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

Change your settings in Sharing preferences, for one, and remove the server out of the Finder's sidebar. Obviously, this is the result of transfering all your other computer's preferences to your new computer.

FRM-92050: Failed to connect to Server: /forms/lservlet-1 coming thru LBR

Similar Messages

Maybe you are looking for