FRM-92101:

Hi
I've got an error message while running form.it is....
FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
What may be the fault and what is the remedy can any one suggest me?
Regards
Amritava

Gerd,
We are facing the same peoblem.
Ours is web based application with
forms 10gR1
AS also 10g
DB 9.2.0.1.0
Any clues?
Pls help..
jeneesh

Similar Messages

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

FRM-92101 when trying to run forms from Forms Builder 10g

I have been struggling with this for a few days now and have tried multiple solutions around on these forums without any resolution yet!
Trying to run Forms Builder on a Windows XP machine with Oracle Development Suite 10.1.2.0.2 installed in its own ORACLE_HOME. The installation completes succesfully and I can start the OC4J instance.
1) When I open up Forms Builder and pull up the test.fmb form and try to run it, I get the following error:
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
On clicking 'Details' the following errors are displayed:
Java Exception:
oracle.forms.netConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
2) The ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\application.log includes the following errors:
11/11/25 10:02:23 formsweb: RunformProcess.connect(): failed !
11/11/25 10:02:23 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
11/11/25 10:02:23 formsweb: Forms session <1> exception stack trace:
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:153)
     at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
3) The Java console has the following error:
oracle.forms.net.ConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties with no proxy
Any inputs will be greatly appreciated.

Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
I am using 12.1.1 on Windows Server 2008.
Any help or guidelines is greatly appreciated.
Santhosh.

FRM-92101 error while opening forms on fresh r12 vision db on hp ux (11.31)

Hi all,
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.
As search from Google and forums get the same issue with RHEL, issue seems to be with some library.
We are having other testing instances on the same server and I am able to open there forms.
Is any issue with library or any configuration requiring after installation?
What is post installation task after installing r12?
Not able to execute .env file with owner and privileges, why?
How to get r12 original media from oracle?
Thanks in advance
Sandeep.

Hi sandeep;
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.Please check below and see its helpful:
Error Dld.So: Unsatisfied Code Symbol 'Nnftboot' Signal 9 When Running Reports Concurrent Requests [ID 560287.1]
All Concurrent Requests End With Signal 9 Termination Error [ID 452714.1]
Also check Apache log files for more details
What is post installation task after installing r12?You can follow Recomended R12 patches On Metalink
Not able to execute .env file with owner and privileges, why?How you are trying to execute?
How to get r12 original media from oracle? You can log Sr for media or you can contact wiht your oracle local office
Regard
Helios

How to deploy forms? Or: FRM-92101 on Forms 10g (10.1.2.0.2)

Hello,
we have a problem with deploying changed FMX-Files.
We work with an OAS 10.1.2.0.2 and the Developer Suite 10.1.2.0.2. The Compilation works fine with frmcmp_batch.sh on the server (Linux X86).
And these Files are accessible within the JInitiator-Applet. All fine.
But now there's the problem: If anyone has opened a FMX-File within JInitiator and this FMX-File is compiled again, the compilation is successful but the access on this form is not. The user only get an error
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
Please look into the web-server log file for detatails.
Details...
Java Exception:
oracle.forms.net.ConnectionException: Forms.session <46> aborted: unable to communicate with runtime process.
at ...
I remember, there was an equivalent problem under 9i and the solution there was to set the FORMS90_MMAP-Variable. Under 10g there is no such setting. (and this is clearly no solution)
Now my question: There had to be a way to treat this problem. And all of the Forms-Developer had to have the same problem. I would be very happy if anybody could tell here how to deploy correctly.
Many thanks in advance,
Ralf

Yes, indeed.
We want to change fmx-files in a running installation because the functionality of the forms have to change, errors have to be corrected and so on.
I read the suggestions in Note 286762.1, but honestly I think it is to complicated in a development team to handle with two or more directories and to make clear, which one is the production-directory
I think this could not be the only possibility.
We thought about this:
- we have a development directory, a "waiting" directory and a productivity-directory.
The process could be:
- compiling in the development directory
- checking, if the fmx-file is in use (with lsof)
- if the fmx-file is in use, the fmx-file will be transferred into the "waiting" directory
- it the fmx-file is not in use, it will be transferred into the productivity-directory
- in regular intervalls a job has to test, if the files in the "waiting" directory are freed. If so they will be transferred, else not.
Only if changes are needed to do immediately (e.g. heavily errors), the fmx-file can be moved manually in the productivity-directory.
But this is only our idea. I thought there has to be a standard deployment-strategy from Oracle or better ideas from other developers.
Perhaps someone has a even better suggestion for us.
Many thanks in advance for every idea,
Ralf

FRM-92101 Error when trying to access forms in R12 in windows 2003 SP1

Hi,
We have installed the Oracle Applications system on one of our instance.
When we try to start the application we face some problem:
The syndrome is the following:
We are launching one of the Apps Forms Page
However, we have to wait around 8-10 minutes till we got the error
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
Details...
Java Exception:
oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.HTTPConnection.connect(Unknown Source)
at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
at oracle.forms.engine.Runform.initConnection(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
The OS in Windows 2003 with SP1

We are launching one of the Apps Forms Page What is the form name? What is the navigation of the form?
Did you try to regenerate the form via adadmin? If not, please do so and check then.

FRM-92101 error message

Hello all,
I have oracle and form 10g running under XP sp2. When running my form, i have the message error FRM-92101 in my first page with no executable code, it does nothing until i press a button. Last day, i had added webutil into my project and test it. It works fine. I had checked the pasts posts in the forum. but i don't find any answer to my problem. Nothing in my trace folder \forms\trace.
Here is my java consol log.
I had delete my .fmx file and recompile my program but the problem persists.
Loading http://wbcla.aaaa.ca:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://wbcla.aaaa.ca:7778/forms/java/frmall_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Loading http://wbcla.aaaa.ca:7778/forms/prod_ico/cla_ico.jar from JAR cache
Loading http://wbcla.aaaa.ca:7778/forms/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.2
oracle.forms.net.ConnectionException: Forms session <84> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
java.io.EOFException
     at java.io.DataInputStream.readUnsignedByte(Unknown Source)
     at oracle.forms.engine.Message.readDetails(Unknown Source)
     at oracle.forms.engine.Message.readDetails(Unknown Source)
     at oracle.forms.net.StreamMessageReader.run(Unknown Source)
java.lang.NullPointerException
     at oracle.forms.handler.FormWindow.handleWindowActivated(Unknown Source)
     at oracle.forms.handler.FormWindow.propertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.fireBooleanPropertyChanged(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.setActive(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.laf.BaseWindowManager.transferActivationForward(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.laf.BaseWindowManager.windowRemoved(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.processDesktopEvent(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.removeWindow(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.close(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.dispose(Unknown Source)
     at oracle.forms.handler.DialogThread.doAlert(Unknown Source)
     at oracle.forms.handler.DialogThread.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks.
MK.

does this occur with all your forms-modules or just with a specific one?
If a specific one, try to remove the webutil-objects from the form and try again.
If you added webutil, did you also put webutil.pll and webutil.olb to your runtime-directory??
Last try:
do a full recompile of your moduel ctrl+Shift+K (at least in german version).
hope this helps

FRM-92101 error

Hello.
I'm currently learning forms and reports in 9.0.4 on a standalone pc. I have created a simple report in report builder that runs fine there. I believe I have correctly set up the button to run the report from a form in form builder. But when I try to run it there, I get this error: " FRM-92101. There was a failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web server log for details." Can someone point me towards what I need to do to resolve this possible configuration issue?
Thanks

Hi,
hard to diagnose from remote and it may require you to debug your code up to the line causing the trouble. I think customer support might be a better help in this case.
Don't know how the user enters parameters, but if he simply provides values in pre-defined fields, can't you do immediate validation on the required fields?
Frank

FRM-92101 error while opening forms & OC4J

Hi all,
I have a customer having problem after certain number of users connecting to the application.
These are the following setup in the environment:
1. OAS 10.1.2.1
2. Windows 2003 Standard Edition SP1 32 Bit
3. Memory 2GB
They are running the application using the Oracle Form, connecting through the application using Internet Explorer.
Number of users might connect to the application are around 42 users in application server #1 and 10 users in application server #2.
Recently they reported that they experiencing the FRM-92101 in random fashion in all clients computer.
I did a check on the windows task manager and I can see that frmweb.exe process will consume around 17MB - 68MB.
This is random, not all process consuming up to 68MB, some of it will be in the avarage of 30MB to 50MB.
I checked the registry for the desktop heap setting which is in HKEY_LOCAL_MACHINE -> System -> Current Control Set -> Control -> Session Manager -> SubSystems. There is a key named Windows and inside here there is a variable called SharedSection. Currently the value is set to 2048, 3072, 2048
From what I know this setting should be enough for around 40 users.
I noticed when 42 users were connecting to app server #1, the physical memory available is only around 140MB.
This FRM-92101 error is not only happening to app server #1 but also #2 which only handles 10 users maximum.
From the information above, I have some questions:
1. What other areas that I need to check for this?
2. What other configuration I can increase so this error is not happening anymore?
3. If I check on opmnctl status, I can only see 1 OC4J home and OC4J_BI_FORMS. Does increasing the number of OC4J can suppress this error?
Please give me the enlightment.
Thank you so much,
Adhika

Hi sandeep;
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.Please check below and see its helpful:
Error Dld.So: Unsatisfied Code Symbol 'Nnftboot' Signal 9 When Running Reports Concurrent Requests [ID 560287.1]
All Concurrent Requests End With Signal 9 Termination Error [ID 452714.1]
Also check Apache log files for more details
What is post installation task after installing r12?You can follow Recomended R12 patches On Metalink
Not able to execute .env file with owner and privileges, why?How you are trying to execute?
How to get r12 original media from oracle? You can log Sr for media or you can contact wiht your oracle local office
Regard
Helios

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Oracle Forms 10g Frm-92101,Frm-92100

Hi every body ..
I have build template form using oracle form developer 10g
.and i have use PJC To Customize default Smart Toolbar
,it's work fine but on heavy interaction i receive one of this tow error
Frm-92101,Frm-92100...but using default oracle smart bar i don't receive this error Frm-92100
please help me it's urgent..

Please refer to the document, http://otn.oracle.com/products/forms/pdf/forms9idiagnostics.pdf
The section, 'FRM-92XXX ERRORS' describes some of the causes and solutions to such errors.
P.S. Specifying the stack trace of the exception would help in narrowing down the cause of a problem.

The memory could not be "read" - FRM-92101

Hi:
I tried to copy the records from one block(database) to the other(non-database). It's working fine when the block had less than 50 records. But when it's greater than 50 records I got the following errors:
ifweb90.exe - Application Error
The instruction at "0x77fcc823" referenced memory at "0xfffffff8". The memory could not be "read".
Click on OK to terminate the program
OK
followed by
FRM-92101: There was a failure in the Forms Server during the start up .....
OC4J Instance got Forms session <#> aborted - Unable to communicate with runtime process.
Any ideas,
Thanks,
-TD

HI
Iam getting the same error when testing the BI reports.
Please advise,
cheers

FRM-92101 There was a failure in the forms server during startup

Hi guys when running EBS i am getting this error:
it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
error : FRM-92101 There was a failure in the forms server during startup
this could happen due to invalid configuration
please look into webserver log file for detail
following are the formsweb.cfg file details:
-------------------------------------------------------------------------------start----------------------------------------
[oratest@kapp server]$ vi formsweb.cfg
[oratest@kapp server]$ tail -1000 formsweb.cfg
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=orac
------------------------------------------------------end----------------------------------------------
plz help
regards,
kashif

Hi Hussein,
i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
and application log is as follows:
10/10/22 18:41:45.258 10.1.3.0.0 Started
10/10/22 18:41:46.981 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
10/10/22 18:44:38.873 formsweb: ListenerServlet init()
10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 14:57:11.795 10.1.3.0.0 Started
10/10/23 14:57:22.415 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:05:56.542 10.1.3.0.0 Started
10/10/23 15:05:58.541 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
10/10/23 15:15:29.23 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:33:44.992 10.1.3.0.0 Started
10/10/23 15:33:46.570 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
regards,
kashif

FRM-92101 when openning a particular form

Hello,
When opening a particular form, users are encountering the error message:
FRM-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration
We have many more forms in the application. Those are working fine.
Details:
OAS is 10.1.2.0.2 on windows 2003 server
Database 10.2
Could you please have a look on the issue.
Regards,
murali

Hi,
If you have access to metalink I recommend you this note :
[url https://support.oracle.com/CSP/main/article?cmd=show&id=189867.1&type=Not]Master Note for: Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx [ID 189867.1]
I also use a tip when I encounter this problem that consist on making a search/replace pl/sql : search the string "*;*" and replace it by the same "*;*" .
That make to whole forms to be recompile for sure.
And it works for me.
Regards
JeanYves

Frm-92101 happens when I open a form from another form and close it.

Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form.
Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
When I put before the "EXIT_FORM" two messages, everything is fine and the second form is closed and I repeat to the first form just as I wanted.
In forms 9.0 it didn't happen.
Does it have a connection with the fact I use JRE instead of JInitiator?
Thank you.

>
There are numerous causes of the FRM-92101 error. I recommend you start your investigation by tracing your Forms session so you can see what your form is doing when the error occurs. Check out My Oracle Support document How to Use Forms Trace with Forms [ID 209372.1] for information on how to enable the trace. Also, take a look at My Oracle Support document Known Causes of FRM-92101 Error In Forms [ID 604633.1].
Hope this helps,
Craig
>
I have just found that there is a "Synchronize" command in one of the main attached libraries, and when I comment that command the application works well. But I don't want to comment it because it's a great library and I assume it has a part in the system.
I have discovered that in the new Forms' help, the fact that the System.Current_Item mustn't be null so the command "Synchronize" will work, is mentioned. In the old Forms' help, that fact is not mentioned.
So I tried to put it inside a condition that checks if the current item is not null, but the compiler doesn't recognize the "current_item". I don't know why. Because it's a library? So how can I check this? I can sent it as a parameter, but I don't want. Do you know something about it? Thank you.

FRM-92101:

Similar Messages

Maybe you are looking for