FRM-92102: A network error has occurred. on Windows 2003 Server

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.
I googled, searched this forum for solution. But these didnt work out. So please help me to get this fixed.

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.Please check the application.log file for details about the error.
Please see tjese docs.
R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Loading Forms [ID 1103744.1]
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Thanks,
Hussein

Similar Messages

FRM-92102 - A network error has occured

Hi,
I'm deploying a forms 9i application on the intranet. I'm using Oracle Application Server Forms and Reports Services 9.0.4 under Red Hat Linux AS 4.0, along with an Oracle 9i Database on another server (actually multiple databases, used for benchmarking). Every time I connect from a remote PC on the network under Windows XP Pro or Windows 2003 Server, after a few seconds or minutes, I get the error message: FRM-92102 - A network error has occured after ...
I did a lot of research on the internet. I'm using Internet Explorer 6.0, so I tried from Netscape 8.0 and Netscape 7.0, but I got the same problem. I changed the networkRetries in the formsweb.cfg to 5, but it didn't change anything.
On the other hand, I installed the Oracle Application Server Forms and Reports 9.0.4 on a Windows platform and it works perfectly, with no network error problems.
Also note that the Forms 9i application uses Webutil.
So, right now, I'm a bit lost. Can anyone please tell me if there is some parameter I have to set, or something I should do to make it work?
Thanks a lot

First, when the network error occurred, I ran the url on the site server. It gave me the following page:
Oracle Application Server 10g Forms Services
The Forms Listener servlet is up and running
as for the modified files during the last minute, here is what I got:
[oracle@bmlps-appser bin]$ find /u01 -cmin -1
/u01/app/oracle/product/9.0.4/reports/logs/rep_bmlps-appser
/u01/app/oracle/product/9.0.4/reports/logs/rep_bmlps-appser/rwserver.log
/u01/app/oracle/product/9.0.4/reports/server
/u01/app/oracle/product/9.0.4/reports/server/rep_bmlps-appser.dat
/u01/app/oracle/product/9.0.4/sysman/log/em-web-access.log
/u01/app/oracle/product/9.0.4/sysman/emd/state
/u01/app/oracle/product/9.0.4/sysman/emd/state/0013.dlt
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/server.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/rmi.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/default-web-access.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/jms.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/global-application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/application-deployments/reports/OC4J_BI_Forms_default_island_1/application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/application-deployments/forms90app/OC4J_BI_Forms_default_island_1/application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/persistence/OC4J_BI_Forms_default_island_1
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/persistence/OC4J_BI_Forms_default_island_1/transaction.state
/u01/app/oracle/product/9.0.4/j2ee/home/log/home_default_island_1/default-web-access.log
/u01/app/oracle/product/9.0.4/webcache/logs/access_log
/u01/app/oracle/product/9.0.4/opmn/logs/states
/u01/app/oracle/product/9.0.4/opmn/logs/states/p1151074367
/u01/app/oracle/product/9.0.4/opmn/logs/states/.opmndat
/u01/app/oracle/product/9.0.4/opmn/logs/OC4J~OC4J_BI_Forms~default_island~1
/u01/app/oracle/product/9.0.4/opmn/logs/ipm.log
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/access_log.1125489600
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/dms_metrics.28383.shm.mem
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/error_log.1125489600
Thanks

FRM-92102: A network error has occured [IBM AIX 5.3]

Hi All,
I have deployed my oracle forms application on Oracle 10g(10.1.2.0.2) Application Server installed on IBM AIX 5.3 Server. Forms developed on Developer Suite 10g.
When I login to the application and start working, The FRM-92102 Error pops up and I have to quit, without any other option
Soon, when I check the opmnctl status, I see OC4J_BI_Forms moved into "init" state. After sometime the state gets into "Alive”. Then i run my application again only to get the same pop again.
The pop up occurs randomly. Neither specific form nor operation invokes it! I don’t know why the Status of OC4J_BI_Forms suddenly gets into "init" state? Since it’s in "init" state the Application is loosing a connection to forms service and popping up the above error.
Pls find the detailed logs in below link
http://www.mediafire.com/?ywnyid4xhr5
I have a dead line to meet in Next weekend. Any help is highly appreciated.
Humble Regards,
SAM

Hi All,
I resolved this by editing opmn.xml file.
Change
<data id="/reports/rwservlet/pingserver?start=auto" value="20000"/>
to
<data id="/reports/rwservlet/" value="20000"/>
Regards,
SAM

FRM-92102: A network error or server failure has occurred.

Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
Reem

re**** wrote:
Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
ReemCan you reproduce the issue using a different browser or from a different machine?
Please contact "Solution Beacon" support since we don't maintain their environments.
Thanks,
Hussein

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Hi rebjrbaker,
I'm guessing that you're trying to log in to the service from within Reader. If that's the case, you may need to update the version of Reader you're using. Choose Help > Check for Updates. You should be using version 11.0.9 (this update was just released on Tuesday, 9/16).
Best,
Sara

Publishing Universal App - An unexpected network error has occurred

Hello,
Each time that we tried to "Associate App with Store" or Create App package" via Visual Studio 2013 to publish our Windows Phone 8.1 Universal app, we have the error "An unexpected network error has occurred. the app list cannot be refreshed.
Please retry by pressing the refresh button".
Our account has more 100 WP apps, and we saw that it could be the problem?
With Silverlight app, it was easy to generate a XAP. But now with Universal Apps, due to this issue, we are blocking! Please Microsoft, can you correct this bug?
Thanks
ClevLab (www.clevlab.com)

Hello Sroye.
I have been struckling with the same problem. Copying large data amounts between my MacBook and my Airdisk works perfectly (though slowly).
But copying data amounts larger than about 300MB from my XP to my airdisk suddenly stops with the error you get. Hereafter I cannot access the airdisk until I have re-started both my AEBS and my 500GB LaCie HFS+ formatted disk drive.
I use the new 7.1.1 firmware version in my AEBS.
Have you solved your problem?
Kind regards Thomas.

A network error has occured. This computer's Internet connection appears to

Hi all
I keep getting this message evertime I try to open Quicktime but I dont understand it! any ideas?!

To Apple Discussions!
The following also applies to the original poster Richard Woodger:
What type of internet connection do you have? Unknown if that could be part of the problem especially if you both have dial-up service.
Also, which browser & version were you both using? If the browser was not the latest version, update it, repair permissions & see if that stops the error.
I couldn't find anything to directly connect this error to QuickTime.
See the following Knowledge Base Articles. They may be of some help:
http://docs.info.apple.com/article.html?artnum=106796 Mac OS X: Connect to the Internet, troubleshoot your Internet connection, and set up a small network
http://docs.info.apple.com/article.html?artnum=106749 Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://docs.info.apple.com/article.html?artnum=30995 QuickTime Streaming Server: General Information
Until others chime in with troubleshooting solutions, you both may want to research this error on your own by going to the top left of this site & click on Advance Search inside the purple menu bar. In the search field of Advanced Search type in the error code A network error has occured. This computer's Internet connection appears to be online.
Good luck!

A network error has occurred. Check your Internet connection, and then try again.

I cant downlload updates in my mac, its been 3 months since I cant do it. it says: "A network error has occurred. Check your Internet connection, and then try again." Ive tried in differents houses, wifi, internet and it keeps telling me this. Does someone know what can I do? Thanks a lot!

Solution may be found if you search in the "More Like This" section over in the right column.

Admin gets the following message while trying to update software: None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. Any suggestions?

I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?

The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.

I keep getting a network error has occured how do I fix this?

So I just got the LG Vortex, and I am learning quite a bit, I have set up a google account and went through all the steps but when I go to the market place, or any other apps it says a network error has occured..Is it set up wrong? I have it set up on 3G mobile Hotspot.

3G Mobile Hotspot can share the phone’s 3G data connection with any Wi-Fi capable devices.
You would want to make sure that feature is off, then you could just use the network to access the Android Market Place.
Power the device off then back on, then dial *228 send and option 2 on the device.
Then try accessing the Market Place again.

A networking error has occurred: Cannot open file (-3001)

When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
Any ideas? Do I trash a corrupted file or what?
Many thanks in advance.
John
Message was edited by: [email protected]

I troubleshot this problem with a helpful Apple tech person who provided a workaround:
Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
Any ideas out there?

A networking error has occurred: Error NSURLErrorDomain -1005 (-1005).

Tiger 10,4,10 6 wks old, new Mac user. Believed I had a hacker, Genius Bar disconnected bluetooth and Wifi. 35 pass erase, reinstallation. While in the process of updating, everything updated (at least 7 items) EXCEPT iLife Support version 8.1 which gave me this error:
"A networking error has occurred: Error NSURLErrorDomain -1005 (-1005). Make sure you can connect to the Internet, then try again."
I have tried numerous times, still get this message. Any information?

Welcome to Apple Discussions!
I have gotten that error numerous times both with my iBook and with my MBP. I connect using the internal modem on the iBook and the external modem on the MBP using dial up. I have always just assumed it was a problem with the telephone line but I don't really know. I just keep trying and eventually I get a successful download. But I am curious about this too.

RDS 2012 (An Authentication error has occurred 0x607) - WINDOWS 8 ONLY

Hi - please help. I've read many posts relating to this error, but none have fixed my issue.
We have an RDS 2012 setup. 2 Servers. Both session hosts. only 1 is the broker. Cert from official CA.
My authentication is set to ONLY allow devices with Network Level Authority. I don't want to remove this.
Windows XP and Windows 7 can connect both internally, and externally via the RDWeb address perfectly fine, but all Win8 machines get the error "An authentication error has occurred. Code 0x607.
Can anyone please advise why?
Many thanks

Hi,
I have seen other similar cases got resolved by setting the encryption level to low and security layer to Negotiate.
Here is a thread below:
An authentication error has occured (Code: 0x607)
https://social.technet.microsoft.com/Forums/windowsserver/en-US/94780a11-23ba-4a3c-b11a-734007c2d2fd/an-authentication-error-has-occured-code-0x607?forum=winserverTS
If it is not an option for you, I suggest you check whether the SSL certificate used by RDWeb access is trusted by the Windows 8 clients. There should be a corresponding root CA certificate installed in the Trusted Certification Authorities store.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error on saprouter installation (Windows 2003 server)

Hi everyone,
We are setting up our SAProuter server specifically for our SAP remote connection and Solution Manager setup but encountered an error. I am using Windows 2003. I've already acquired certificate by issuing command sapgenpse get_pse -v -r certreq -p local.pse. I have no idea what the error is all about. Unfortunately, I am no Network Admin expert if this is about network issues. Would very much appreciate some enlightenment and help from you guys. Thanks!
Error details from dev_rout log and SM59:
dev_rout log:
ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1510]
      GSS-API(maj): No credentials were supplied
      GSS-API(min): File is not existing
    Could't acquire INITIATING credentials for
from SM59 of one of our SAP systems
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: GSS-API(maj): No credentials were supplied GSS-API(min): File is not e
Error Details     LOCATION: SAProuter 37.8 on ....
Error Details     DETAIL: SncPAcquireCred
Error Details     CALL: gss_acquire_cred
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 7
Error Details     MODULE: sncxxall.c
Error Details     LINE: 1510
Error Details     RETURN CODE: -104
Error Details     SUBRC: 0
Error Details     RELEASE: 640
Error Details     TIME: Fri Oct 26 17:40:02 2007
Error Details     VERSION: 5

Hi Markus, yes .pse file is located in the same directory as the saprouter executables.
Also, when I tried to execute sapgenpse get_my_name -p local.pse I got the ff. error:
D:\SAProuter>sapgenpse get_my_name -p local.pse
get_my_name: Couldn't open PSE "D:\SAProuter\local.pse"
ERROR in af_open: (1824/0x0720) Wrong PIN for PSE : "D:\SAProuter\local.pse"
ERROR in secsw_open: (1824/0x0720) Wrong PIN for PSE : "D:\SAProuter\local.pse"
ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong PIN for PSE : "D:\SAProuter
\local.pse"
ERROR in aux_get_credentials: (17665/0x4501) Requested credentials not found
ERROR in des_decrypt_end: (1792/0x0700) wrong or inconsistent padding decrypted
And then tried running sapgenpse get_my_name -v -n Issuer and got the ff:
D:\SAProuter>sapgenpse get_my_name -v -n Issuer
get_my_name: no PSE name supplied, SSO credentials not readable for you!
running seclogin with USER="XXXXXX"
0: CN=OURSERVER, OU=0000123456, OU=SAProuter, O=SAP, C=DE
         D:\SAProuter\local.pse
      NOT readable for XXXXXX
NO readable SSO-Credentials available (total 1)
I really am so confused as to what is happening here since it seems I successfully acquired the certificate and when I run sapgenpse seclogin -p local.pse -O administrator I got the ff. message which seems successfully completed:
D:\SAProuter>sapgenpse seclogin -p local.pse -O administrator
running seclogin with USER="XXXXXX"
creating credentials for user "OURSERVER\Administrator"...
Please enter PIN:
Adjusting credentials and PSE ACLs to include "OURSERVER\Administrator"...
   D:\SAProuter\cred_v2 ... ok.
   D:\SAProuter\local.pse ... ok.
Added SSO-credentials for PSE "D:\SAProuter\local.pse"
   "CN=OURSERVER, OU=0000123456, OU=SAProuter, O=SAP, C=DE"
Thanks for helping out!

A network error has occurred

I get this screen every time I try to download PewPew 2 (and only with PewPew2), regardless of whether or not I'm on WiFi or LTE. Restarting or refreshing the apps list didn't help, too.
Any possible fixes?
Screencap

Hello thurask and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're unable to download an application.
Since you are only experiencing an issue downloading this one particular app, I'd suggest you contact the vendor to further investigate.
You can find the contact information here.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

FRM-92102: A network error has occurred. on Windows 2003 Server

Similar Messages

Maybe you are looking for