FRM-92160 Error running forms on the web
Hi,
I'm geting "FRM-92160: WEB client version too old." error when I try to run a form off the web. This form was running perfectly fine till yesterday. Is it because something was changed in server setting ?? please advice.
Hi
Iam also facing the same problem.
What i did was installed IAS and patch 4 on the server and tried to connect thro the browser.
Did anyone help throw some light on this issue.
Thanks
Giriraj
there is another thread with the same questions (do you guys work in teh same office!!).
Check out that tread for suggestions
Regards
Grant Ronald
Similar Messages
-
DEV 6.0 team : Help req while running forms on the WEB
I am using Windows NT 4.0 with Service pack 3 running Oracle8
8.0.5 with Apps Server 4.0.7 and Dev6.0. I have been able to run
Forms on the web and with Jinitiator and with out Jinitiator but
there are a few problems
1 ) The Tigger " When Mouse Click" does not fires on the web for
a display item.
2) when i set the CLASSPATH=E:\orant\forms60\java for forms the
tree in OAS 4.0.7 stops showing and if i remove it from there
then i am not able to run the forms for web through the forms
designer
3) the performnce is very slow how to improve the performance on
Web with jinitiator.
an early response would be appreciated
nullmobeen (guest) wrote:
: I am using Windows NT 4.0 with Service pack 3 running Oracle8
: 8.0.5 with Apps Server 4.0.7 and Dev6.0. I have been able to
run
: Forms on the web and with Jinitiator and with out Jinitiator
but
: there are a few problems
: 1 ) The Tigger " When Mouse Click" does not fires on the web
for
: a display item.
: 2) when i set the CLASSPATH=E:\orant\forms60\java for forms
the
: tree in OAS 4.0.7 stops showing and if i remove it from there
: then i am not able to run the forms for web through the forms
: designer
: 3) the performnce is very slow how to improve the performance
on
: Web with jinitiator.
: an early response would be appreciated
I can only speculate on some of your issues, but maybe they
might give you some insight on possible alternatives.
Mouse-Click on Display Item
The display item does not, by definition allow modification.
Have you tried changing the item to text and then disabling the
INSERT and UPDATE properties to NO? I have tried using display
items in the past, resulting in a grayed-out box on the web. To
get around this, I made the above changes and created a mouse
trigger to jump to another field when someone tried to mouse-
click on it.
Changing CLASSPATH on OAS 4.0.7
I had the same results. The OAS installation sets the CLASSPATH
to what it needs and changing it has the results you describe.
I am curious, however, are you able to view the form from the
Developer Forms Designer using the other CLASSPATH. I have not
been able to use this feature at all. I read somewhere that
this functionality is not available in the beta version. I
would appreciate any information that you can share.
Jinitiator Performance
Assuming that you have already tried cache settings and short of
the users having faster machines with more memory, faster web
access, etc. I don't think there is much we can do but wait for
Oracle and Sun to make enhancements.
I have had some success with using IE 5.0 (beta) directly
without the Jinitiator. My web applications load and run a
whole lot faster using the same configuration that you describe.
It might be worth another look!
Hope this helps.
Michael Shannon
[email protected]
null -
What AS to run form on the web
I'd like to know what product (AS version java, Form, Standard Ed, Enterprise Ed) my customers should buy to have my form (developed by Developer Suite) running on the web ?
In the link that you mention you need to click on the books images to get to the technical documents.
Try this link:
http://otn.oracle.com/products/forms/htdocs/upgrade/content.html
You can see links to papers and internet seminars on this site that will help you.
For example:
http://otn.oracle.com/products/forms/pdf/forms9icstowebmigration.pdf
If you want to see how it looks try:
http://otn.oracle.com/products/forms/htdocs/upgrade/viewlet_viewlet_swf.html -
Running reports from forms on the web
On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null -
Error when running reports on the WEB
Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
ThanksHello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj -
FileNotFoundException while trying to run a form on the web
Hi,
I've installed Forms Server on Windows NT. I'm trying to run the test form on the web, and in the java console window I'm getting the following message:
Oracle JInitiator version 1.1.7.30
Using JRE version 1.1.7.30o
User home directory = D:\WINNT\Profiles\07223
JAR caching enabled.
Cache directory: D:\PROGRA~1\Oracle\JINITI~1.30\jcache
Maximum cache size: 50000000 bytes
Opening http://nbk981536.ul.us.com:80/forms60java/f60web.jar no proxy
Unable to contact http://nbk981536.ul.us.com:80/forms60java/f60web.jar
Opening http://nbk981536.ul.us.com:80/forms60java/f60web.jar no proxy
java.io.FileNotFoundException: http://nbk981536.ul.us.com:80/forms60java/f60web.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Compiled Code)
at sun.net.www.protocol.http.HttpURLConnection.openConnectionCheckRedirects(Compiled Code)
at sun.applet.JARCache.beginStoring(JARCache.java:348)
at sun.applet.AppletResourceLoader.loadJar(AppletResourceLoader.java:218)
at sun.applet.JinitAppletPanel.loadJarFiles(Compiled Code)
at sun.plugin.AppletViewer.loadJarFiles(Compiled Code)
at sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:588)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
Any ideas as to why this is happening, and any suggestions to resolve this is highly appreciated.
Thanx in advance.
VLI've installed Forms Server in another Oracle home called 'dev6i'. I've the f60web.jar and 11 other .jar files in \dev6i\forms60\java directory. I've installed the forms server successfully (I can say this because I was able to run the test form successfully couple of times, until I installed reports server in the same Oracle home. Then it started giving this message in the java console). I've also installed Webdblistener. My reports test page is displaying correctly though. Any ideas what might have happened??
Thanks
VL. -
How to run others application in Oracle Forms on the web version?
How to run others application in Oracle Forms on the web version?
Pang,
guess that you want to start client side programs from Forms on the Web. There is a sample on OTN (host bean) that allow you to acces sthe client and start executables.
Frank -
Load oracle jdbc driver error when run applet via the web
Hi All,
I have built an applet which connect to database via jdbc thin driver. It works fine when I run it through the applet viewer, but got a problem when run it through the web.
java.lang.NoClassDefFoundError: oracle/jdbc/driver/OracleDriver
I am using jdev9i 9.0.4 and jdk 1.4.2. The jdbc version is 9.0.1
I have added both the classes12.zip and ojdbc14.zip in the class path and also pack them together with my applet class. Here is the code
public class MyApplet extends Applet
implements Runnable
public void start()
if(theThread == null)
theThread = new Thread(this);
theThread.start();
Retrieve R = new Retrieve();
this.MyMap = R.retrieveDesc();
public class Retrieve
public Retrieve()
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
conn=DriverManager.getConnection("jdbc:oracle:thin:@babyruth.wvu.edu:1703:devdw", User, Password);
conn.setAutoCommit(true);
connectStatus = true;
public HashMap retrieveDesc()
return map;
I have also built one HTML page NewApplet like this
<HTML>
<HEAD>
<TITLE> My New Applet</TITLE>
</HEAD>
<APPLET CODE="MyApplet.class" CODEBASE="menu" ARCHIVE="MyApplet.zip" WIDTH=300 HEIGHT=485>
<!--General Settings-->
<param name="bgcolor" value="255,255,255">
</HTML>
Any advice is highly appreciated
MeiSir,
Well you haven't "packed" them correctly. Why don't you just add the driver bits to the soucebase tag? or something like that anyway...
Sincerely,
Slappy -
Not able to generate form in the web brower
I am not able to open a form in the web browser...
I have started OC4J instance and connect to the database...
Errors :---
In the java Console :--
Java Plug-in 1.6.0_03
Using JRE version 1.6.0_03 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\sai
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.NoSuchMethodException:
sun.java2d.SunGraphicsEnvironment.setFallbackFont(java.lang.String)
at java.lang.Class.getMethod(Unknown Source)
at oracle.forms.engine.Main.initDesktop(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NoSuchMethodException: sun.java2d.SunGraphicsEnvironment.preferLocaleSpecificFonts()
at java.lang.Class.getMethod(Unknown Source)
at oracle.forms.engine.Main.initDesktop(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.2
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.security.AccessControlException: access denied (java.util.PropertyPermission
java.home read)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
at java.lang.System.getProperty(Unknown Source)
at oracle.forms.webutil.common.VBeanCommon.<clinit>(VBeanCommon.java:156)
... 16 more
Please tell me the solution how to resolve the issue....
Thanks in Advance.....hi
u have problem in these lines.
webUtilArchive=/forms90/java/frmwebutil.jar,/forms90/java/jacob.jar
webUtilConfig=/forms90/server/webutil.cfg
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
install.syslib.0.7.1=jacob.dll|94208|1.1|truetry something like this.
formsweb.cfg
[default]
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
envFile=c:\DevSuiteHome_1\forms90\webutil\server\webutil.env
# System parameter: default base HTML file
#baseHTML=base.htm
#baseHTMLjinitiator=basejini.htm
#baseHTMLjpi=basejpi.htm
#baseHTMLie=baseie.htm
baseHTMLjinitiator=webutiljini.htm
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htmwebutil.cfg
[webutil]
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
baseHTMLjinitiator=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljini.htm
baseHTMLjpi=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljpi.htm
archive_jini=f90all_jinit.jar
archive=f90all.jar
lookAndFeel=oracle
width=100%
height=100%
install.syslib.location=/webutil
## Change 2nd value to correct file size to avoid raising an error
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
envFile=C:\DevSuiteHome_1\forms90\webutil\server\webutil.env
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=c:\temp
transfer.appsrv.accessControl=FALSE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\temp
[webutilie]
IE=native
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
baseHTML=C:\DevSuiteHome_1\Webutil\server\webutilbase.htm
baseHTMLie=C:\DevSuiteHome_1\forms90\Webutil\server\webutilbase.htm
archive=f90all.jar
lookAndFeel=oracle
width=100%
height=100%
install.syslib.location=/webutil
## Change 2nd value to correct file size to avoid raising an error
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
envFile=C:\DevSuiteHome_1\forms90\webutil\server\webutil.env
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=c:\temp
transfer.appsrv.accessControl=FALSE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\temp
[webutiljpi]
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
baseHTMLjinitiator=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljpi.htm
baseHTMLjpi=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljpi.htm
baseHTMLie=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljpi.htm
baseHTML=C:\DevSuiteHome_1\forms90\Webutil\server\webutiljpi.htm
archive=f90all.jar
lookAndFeel=oracle
width=100%
height=100%
install.syslib.location=/webutil
## Change 2nd value to correct file size to avoid raising an error
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
envFile=C:\DevSuiteHome_1\forms90\webutil\server\webutil.env
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=c:\temp
transfer.appsrv.accessControl=FALSE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\tempsarah
Edited by: QGIRCO on Jan 7, 2010 9:45 AM -
FRM-92100: Error: Your connection to the server wasinterrupted.
hello every body ,
friends when I run oracle forms in "window angel " then this error msg is shown on the screen(FRM-92100: Error: Your connection to the server wasinterrupted.)
I check connection from net manager that is true.
I check oc4j I start properly.
I don't know what is exect solution this problem so plz any one help me to solve this problem and can its solve from formsweb.cfg if yes plz tell me a method.
thanks
best regard
shaz khamHi Friend
Sorry we are just working in Sun Solaris, In my Particular machine i am using XP
Database Server
RDBMS : 11.2.0.2.0
Oracle Applications : 11.5.10.2
Hi Helios- Gunes E...
And the link which send u send i am going through
Troubleshooting FRM-92100 Issues In Oracle Applications 11i [ID 311019.1]
In that i find to check view details
I get this Error message in my application (View details)
FRM:92100 -your connection to the server is interrupted ,this may be the result of a network error ,or failure in the server you will need to reestablish your connection
Details
Java Exception
java.lang.SecurityException:showDocument url Permission denied
at sun plugin2.maim.client MessagePassingExecutionContext show document(Unknown Source)
at sun plugin2,appletPligin2manager$AppletContextmpl show document(Unknown Source)
Please Suggest Why this error Occur
Thanks
Thiliban
Edited by: 4777 on Feb 15, 2012 6:05 AM -
Reports Server/running reports on the web.
I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
ThanksPlease note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/ -
Unable to deploy a form on the Web!!
Hi,
I am unable to deploy my form onto the web.
The following is the error message :
Oracle Forms Web CGI: Error detected
Your request cannot be serviced at this time due to the following error:
ERROR: Cannot open baseHTML file %FORMS60%\server\tester.htm.
Pls help me out in solving the problem.
Thanks in advance
Vishant<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Vishant Shenoy ([email protected]):
Hi,
I am unable to deploy my form onto the web.
The following is the error message :
Oracle Forms Web CGI: Error detected
Your request cannot be serviced at this time due to the following error:
ERROR: Cannot open baseHTML file %FORMS60%\server\tester.htm.
Pls help me out in solving the problem.
Thanks in advance
Vishant<HR></BLOCKQUOTE>
The most likely thing is that the file tester.htm is not in the directory %FORMS60%\server\
null -
Oracle 9i Application Server+Oracle 8i EE+ Forms on the web Very urgent
Hi,
I have correctly install Oracle 9i Application Server and Oracle 8i Entreprise Edition on Windows 2000. What are the following steps to follow in order to run a form on the web. example: test.fmx?
Thanks in advance.
nullIf your web server is working and the forms server is running type:
http://ip addr:port/dev60html/runform.htm
You need to put the ip address or name of your server in and the port number apache is running on (leave blank if this is 80).
This gives you the Oracle Forms start screen.
cheers
tony -
Viewing Icons in Oracle Forms on the Web - any solutions?
Has anyone had problems viewing icons when deploying forms on the web? In client server mode it used to be .ico files. I recently converted our files to .gif and added a register UI_ICON to recognize the icon images when running the forms. I still cannot get the images to appear (icons on buttons). Am I missing something? I am using Oracle Forms 6i Release 2 on Oracle9iAS (1.0.2.2.2a) platform.
T.J.Read about registry.dat in this document:
http://otn.oracle.com/products/forms/pdf/forms9icstowebmigration.pdf
page 18. -
FRM-92101 error,when i update the PLL file.
when i update the pll file,the form of called the pll wasn't open,FRM-92101 error.
i must recompile the form, then it can open.
why ? how can i resolve this problem?Hi,
I think that this has to do with the PLL signature. If you only update the content of an existing pll file then this should go without. If you change the signature (e.g. method arguments or method number) then this has an impact to the internal structure,
Frank
Maybe you are looking for
-
Cube w/ Bluetooth keyboard and mouse
Hi ALL, Has anyone tried using their G4 Cube with a Bluetooth keyboard and/or mouse? I was thinking of using a USB D-Link bluetooth adapter with my new Bluetooth Apple keyboard and BT Mighty Mouse. I know the USB ports are only v1.1, so I thought I'd
-
My Satellite C55T-A5123 is say shut off but stays on
I have had my Laptop for 8 months now and have never had any probloms... Until today. I woke up this morning bla bla bla enough backstory. My laptop was powering off because of low batteries and was saying {SHUTTING DOWN...}. As smart as I am I plugg
-
Hi, I'm working on RRI. In target query(Target_Test query) i created three replacement variables (vendor,specification and calmonth) which will use source query(Source_Test query). if i execute the source query and use goto to connect target to
-
Hi all, I've got two projects.. a public UI and an internal UI. In the internal UI I have a simple home.jspx page. When I deploy this, it shows up fine. It's using a template, and has a tabbed pane on it. All shows up fine. I then try dragging the bo
-
Really really really dumb question
It seems like I spend a great deal of time tracking down null pointer exceptions in my code. (I think everyone does). The only way I know how to do this is go in and put debug flags everwhere and catch runtime exceptions after every line etc. What wo