FRM-93652: The runtime process has terminated abnormally.

Hi All,
I have installed oracle forms and reports 11.1.2.20 with weblogic 10.3.6 and jdk version 1.7.0_45 on windows server 2012.
I have 2 application migrated from 6i to 11g and deployed on application server in one of these tow application when trying to run report from forms i got the following error:
FRM-93652: The runtime process has terminated abnormally.
Contact your system administrator.
But in another application, reports is running successfully although i used the same code to run report using run_report_object and DESTYPE=CACHE and DESFORMAT=PDF.
Any help for this issue.
Thank you for your kind cooperation.

This doesn't look to have anything to do with WebLogic
and certainly nothing to do with JDBC, sorry.
Joe

Similar Messages

Application crashes when calling run_report_object , FRM-93652: The runtime process has terminated abnormally

I got this error when calling report from my form：
FRM-93652: The runtime process has terminated abnormally
Forms Session ID is WLS FORMS.formsapp.101
Here is the trace dump info :
Last Trigger FORM/BLOCK/FIELD: FRM_ACTIVITY_QUEUE.BLK_ACTIVITY_QUEUE.BTN_PRINT
Last Trigger: WHEN-BUTTON-PRESSED - (In Progress)
Last Builtin: RUN_REPORT_OBJECT - (In Progress)
----- Call Stack Trace -----
calling              call     entry                argument values in hex
location             type     point                (? means dubious value)
siehDumpStackTrace( call     kgdsdst()            000000000 ? 000000000 ?
)+104                                              7FFFBF18D110 ? 7FFFBF18D1D8 ?
                                                   7FFFBF1AD130 ? 000000000 ?
siehjmpterm()+650    call     siehDumpStackTrace( 000000000 ? 2B1668E4EB00 ?
                              )                    7FFFBF18D110 ? 7FFFBF18D1D8 ?
                                                   7FFFBF1AD130 ? 000000000 ?
__restore_rt()       call     siehjmpterm()        00000000B ? 2B1668E4EB00 ?
                                                   7FFFBF18D110 ? 7FFFBF18D1D8 ?
                                                   7FFFBF1AD130 ? 000000000 ?
00002B1660459EB0     signal   __restore_rt()       2B16603F2929 ? 7FFFBF1ADBD8 ?
                                                   000000000 ? 000000002 ?
                                                   000000001 ? 0EBC57ED8 ?
Anybody knows what might be the cause ?
Thanks

Refer to : Oracle Support : Forms Runtime Crash (FRM-93652) When calling RUN_REPORT_OBJECT in 11g (Doc ID 1306368.1)

Equium L40 PSL41E: WLan connection doesn't work - host process has terminated

Recently I got a blue screen crash on this laptop after getting a message telling me a host process had terminated.
The computer is on Vista so I expected problems when my parents bought my sister that laptop.
Anyway despite the frequent blue screen, stop messages etc. When I get the message telling me the host process has terminated my wireless connection becomes messed up.
Last time I used the windows: Diagnose why Windows can't find any network option, and was promptly informed that my wireless was turned off (despite the fact that it was actually switched on) and that the computer would automatically turn it back on.
After that it worked fine for a few days until I got another host process termination and the computer crashed once more.
This time the computer refuses to connect despite using the method above and the ConfigFree(Connectivity Doctor), repairing the connection etc.
Possible Solutions I'm given are:
Check communication device for bridged settings as you may need to disable the bridge or reconfigure. a-15.
Thats definitly not the problem.
a-9 Move closer to the wireless router.
Again not the problem i'm sitting right next to it.
a-10 Turn of any bluetooth devices or other devices that may interfere.
There are no such devices near by.
a-11 Check to verify a microwave oven is not in use nearby.
It's not in use.
a-13 Check that the maximum number of devices connected to the access point is not exceeded.
Well it worked for 6 months before this so i'm sure thats not the case.
a-37 Make sure the mac address filtering of the access point is configured properly.
I don't have a clue what this means. But my girlfriends laptop works just fine with the wireless connection.
a-19 Restart the router/access point
Done that multiple times.
Well, Well any suggestions. Fire away i'm all ears.

Hi
I dont know why an host process stopped working but from my knowledge the process could be svchost.exe.
However the issue seems to be related to the Vista OS problem
I see you have tried to fix this but without to be successful Well you get also an BSOD so I think its an serious software issue and you should firstly use the Toshiba recovery CD to reinstall the OS on this notebook.
After the new installation (would take about 15min) update the OS to the latest state.
Then you could try to configure the WLan again
It worth a try ;)

The filtering process has been terminated

got 1 WFE and 1 App server
configured the search like this:
I've moved the search index on both servers so it's like this; (I know it's different folder names)
IndexPartitionOrdinal : 0
RootDirectory : E:\SPSearchIndex
ComponentId : 7bfd9b97-fb14-4e26-8b93-05ce8340c493
TopologyId : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
ServerId : 39202252-fb20-43c9-a674-84c3d4891da1
Name : IndexComponent1
ServerName : APP1
IndexPartitionOrdinal : 0
RootDirectory : E:\SearchIndex
ComponentId : 5c076b2c-945a-4a72-955a-237d003a7498
TopologyId : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
ServerId : ad0c8592-edec-47c5-a14b-df682c13c514
Name : IndexComponent2
ServerName : WFE1
on both servers The <machinename>/WSS_WPG and <machinename>/WSS_ADMIN has full control (also the Searchcontent account) to the folders - but still I get the error:
"The filtering process has been terminated "
can someone please advise so the Search can crawl flawless and without errors?

Hi,
Firstly, please ensure Search Service Account has access to the SearchIndex share which is usually located
in "%Program Files%\Microsoft Office Servers\15.0\Data\Office Server\Applications" directory. And make sure “WSS_WPG” group has full control permissions to "C:\Windows\Temp" directory.
Then try removing and add the existing crawl rules. You could also change the identity of the search to the farm account. Restart search related service and start full crawl.
If it still doesn’t work, please check ULS log and find more detail error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

"The instillation process has encountered an error while installing shared technologies."

Basically, when ever I attempt download Adobe Premiere Elements 11 on my Windows Vista computer, half way through a message pops up saying "The instillation process has encountered an error while installing shared technologies. Please restart your system and try again."
Each time I insert the disc, I select trial version, in case I download the full version and it no longer lets me use my serial code.
Some one said the destination folder couldn't contain more then 250 characters, so I changed its location from 'C:\Program Files\Adobe\' to 'C:\' but it still came up with the same message!
I have downloaded the new Adobe Reader 10, but this makes no difference to the process.. no matter what I've tried it always comes up with the same message.
I also turn of my anti-virus software when installing Adobe Premiere Elements. Still this doesn't do the trick. And I've restarted my computer and tried downloading it and un-downloading it multiple times!
Every time the same message comes up, and I have no idea how to fix it... Its defiantly not my memory that is a problem, as I currently have 50GB free on my OS C:\ drive.
I also have QuickTime version 7.6.9, which is apparently needed?
If you know something I haven't tried that may work, or the problem causing this and a solution to the problem, please can you notify me, Thanks!

Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Mylenium

I bought the game from the iTunes process has not been completed?

I bought the game from the iTunes process has not been completed?

If you are getting a message to contact iTunes support to complete it then you can contact them via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Solution: The installation process has encountered an error while installing Shared Technologies

I purchased an upgrade to Elements 11 and Premiere 11 for Windows a couple of days ago. When I tried to install, I received the following error message:
"The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again."
There was an invitation to Troubleshoot using a button that downloaded Adobe Support Advisor. No joy, it didn't find any issues.
I restarted and tried to install again. Same error message. The solutions here didn`t help so I started up a chat with Adobe Support.
The TSR asked me to run Set-Up.exe in Adobe Photoshop Elements 11 Install\PSE 11\ElementsSTIInstaller. That returned an error about the path being too long. He had me try some other ideas, none worked.
The TSR then asked to do a remote session. After realizing that it would not work from the install on our server, he copied the PSE11 directory locally. He again ran Set-up.exe from the PSE 11\ElementsSTIInstaller directory. This time it completed!
After that, he ran Setup.exe in the PSE11 directory. This time, the setup completed and I was able to open Elements 11!
Hope this helps someone else who gets this error message!
Best,
John

Welcome to the forum.
Take a look at this thread: http://forums.adobe.com/message/5200642#5200642
That OP found that the problem with their installation was due to Norton running, during the installation, but there are other links, with maybe other solutions.
Good luck,
Hunt

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Users added to a Task AFTER the BPM process has started

Does anyone know of a way to assign users to a task AFTER the BPM process has started?

Hi Craig,
whenever a Task Instance gets created, the assigned roles and groups are resolved into individual users. This means that changes to the roles and groups do not affect existing Task Instances.Then the only way to assign additional users is via "nominate" operation from the NWA or "delegate" from the Task UI. Such changes in the roles and groups will only take affect for newly created Task Instances.
Hope this helps.
Stefan

The Reports Server Engine terminated abnormally

Hi,
I created report in Reports 6i. When I used this report on my PC through web, it is ok. When I used this report on the AIX through web, server return this message "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally". Where do I find detailed description about this error.
Thanks
Rene Kana
Enviroment:
9i IAS 1.0.2.2 on AIX 5.1
My PC:
W2k, Reports 6i, ReportServices 6.0.8.11.2

Hi Rene Kana
You can turn on the tracing options in the server configuration file and then look at the tracefile to anlayze the details of the error. This could also be related to printer configuration , please make sure you have a valid printer set up on AIX.
Regards
Oracle Reports Team.

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Trying to burn my project to a DVD using iDVD, but keep getting "Error during rendering/encoding of the menus/slideshows. The burning process has been canceled." How do I fix this?

Just mad a movie and trying to burn it to a DVD but keep getting an error message. It reads:
"Error during rendering/encoding. There was an erro during rendering/encoding of the menus/slideshows. The burning process has been canceled."

Enable Show TV Safe Bengt Wärleby lists items to consider about encoding issues in this topic: Multiplexing Error: Apple Support Communities
OT

Giving input to the runtime process

Hi Friends,
I want to run the java debugger programatically through java. I started the debugger by creating a Runtime Process like:
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import javax.swing.JPanel;
public class RunDebug extends JPanel
public static void main(String arg[])
Runtime execEnv = Runtime.getRuntime();
String command = "";
try
Runtime rt = Runtime.getRuntime ();
command = "jdb -connect com.sun.jdi.SocketAttach:hostname=localhost,port=8000";
Process process = rt.exec (command);
catch (Exception e)
e.printStackTrace();
The debugging process is started and it is ready for input, I have to give input the above same process. I searched for giving inputs to the Process class but I cannot. I tried this with batch file which contains all the commands but it is not running properly. Reply to me if you know the procedure. Thanks in advance.
Thanks,
Sangeetha.

Thank you for your reply pa. But I tried this already like this:
OutputStream fout= process.getOutputStream();
OutputStream bout= new BufferedOutputStream(fout);
OutputStreamWriter out = new OutputStreamWriter(bout);
out.write("locals");
I have given the next command to be supplied through OutputStream. But when I am reading the inputs in the Process like:
InputStreamReader reader = new InputStreamReader ( process.getInputStream () );
BufferedReader buf_reader = new BufferedReader ( reader );
String line;
while ((line = buf_reader.readLine ()) != null)
System.out.println (line);
But the output of the command that I gave through OutputStream is not printed. So I think the command which I gave through OutputStream is not properly recognized. If it is properly recongnized then I should get the output of that command when trying to read the input stream. Whether I am correct in writing the command through OutputStream??? Waiting for your reply...

The virtual machine has terminated unexpectedly during startup with exit code 1 (0x1)

Hello All,
I came up with the error below, when I am trying to start a virtual machine from my VirtualBox. It was working fine till yesterday, and all of a sudden it's throwing this error. The only change I can think of, is of some automatic windows update which might have changed/updated the registry entries.
VirtualBox Version: 4.3.20
Host: Win7 64 bit
Guest: OracleLinux 64 bit
Failed to open a session for the virtual machine DEVM.
The virtual machine 'DEVM' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'E:\VM\DEVM\Logs\VBoxStartup.log'.
Result Code: E_FAIL (0x80004005)
Component: Machine
Interface: IMachine {480cf695-2d8d-4256-9c8c-cce0000fa123}
Please suggest on how to move forward.
Thanks,
Moore

When something happens that probably affects many users, such a as bad Windows update, checking the most recent reports in the Virtualbox product forum might be the best address:
https://forums.virtualbox.org/viewtopic.php?f=6&t=65083
https://forums.virtualbox.org/viewtopic.php?f=6&t=65056

Any method to remove the required field option in the runtime process

I've added the required actions n callable objects for the design time and when i run it in the runtime, there are actually required field that we need to fill in before the interactive form appear. Is there any way that I can remove the required field and fill in the interactive form?
Can anyone help me answer my qn?
Thanks.

Just access the total textfield and make it visible = false;
oForm.Items.Item("29").Visible = false; //The field
oForm.Items.Item("30").Visible = false; //The label
If that doesn't work try setting the left property to something that will never come into view no matter how large you make the window... Something like this
oForm.Items.Item("29").Left = 5000; //The field
oForm.Items.Item("30").Visible = 5000; //The label

FRM-93652: The runtime process has terminated abnormally.

Similar Messages

Maybe you are looking for