FRM40010:cannot read from module

Installed forms6i..test form runs ok..reports are ok but when u run a new module from forms, I am getting the error..pl help..

Can pl elaborate with example..i checked the FORMS60_PATH in regis and is as follows c:\oracle\FORMS60;C:\oracle\TOOLS\OPEN60\PLSQLLIBtest forms runs ok..but other forms which were compiled before are giving the same error..
Thanks

Similar Messages

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

Cannot read from menu file!

Hi All,
When I put the menu property for some form, the form shows this error:
cannot read from menu file
How to solve it?

Make sure the Forms exists in OS PATH if u r calling without the complete path like \\appserver\forms\Myform.fmx
put \\appserver\forms in ur PATH
also check
Check the calling form spelling
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Cannot read from policy store.

Hi All,
while starting our managed server(soa_server1) we are getting below error.
we tried removing cache, tmp and data and fresh restart but no luck.
The Memory on the mount point was 100% full, we have freed some memroy but now the server is not coming up.
Any solutin or pointer would be really helpful.
<Apr 3, 2013 1:17:14 PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/app/Middleware/user_projects/domains/dev1_aia_domain/servers/soa_server1/logs/soa_server1.log is opened. All server side log events will be written to this file.>
oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1020)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:216)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:436)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:228)
... 26 more
Caused by: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
... 33 more
Caused by: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:100)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:317)
... 34 more
<Apr 3, 2013 1:17:19 PM EST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>
<Apr 3, 2013 1:17:19 PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
ed
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
Truncated. see log file for complete stacktrace
Caused By: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
Truncated. see log file for complete stacktrace
Caused By: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:100)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:317)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
Truncated. see log file for complete stacktrace
>
<Apr 3, 2013 1:17:20 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Apr 3, 2013 1:17:20 PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Apr 3, 2013 1:17:20 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Hi,
Your issue is something similar to the issue described in below metalink id. Please check below metalink id, you issue may be resolved.
Start OMS failed with "javax.xml.stream.XMLStreamException: Premature end of file encountered" [ID 1481158.1]
Mark if this helps you.
Regards,
Kishore

FRM-40010 error: Cannot read from .... .fmx

FRM-40010 error: Cannot read from ......... .fmx
Hi everyone,
In my formsweb.cfg file, i have an entry
[iapp]
userid=login/login@db
form=Invlogin.fmx
I attempted to launch my application from the desktop by clicking an icon that points to the URL
http://myapp:8888/forms90/f90servlet?config=iapp
and i received a FRM-40010: "Cannot read from Invlogin.fmx" error.
When i moved the file Invlogin.fmx from my development folder to the
C:\Ora9iDS\forms90 folder, the form is displayed.
What's going on and how do i get the f90servlet to look in a particular location and not just C:\Ora9iDS\forms90 as it appears to be doing.
I have included the path to my development folder in the FORMS90_PATH setting both in the registry and in the default.env file but no luck.
Thanks.

Stephen,
does your development folder has a name with a blank in it (or one of the parent directories?). If yes then locate it in a path with no blanks. There is a know problem with blanks in path names.
Frank

The system cannot read from the specified device

What do I do? ive tried on two computers and it says it on both computers when im trying to install! ive looked at all the troubleshooting pages and it doesnt say anything... my computer says the ipod is connected but when i try to install itunes it says that it cannot read from the specified device please help

hi parkep!
are you getting an error message number with that error message? if so, what is it?
are you installing from the CD, or are you using installers downloaded from the Apple website?
iTunes 6.0.4.2 Installer
Ipod Updater Installer
love, b

BR0255W Cannot read from standard input during a dbverify

Hello,
I am using:
BRBACKUP 7.20 (13)
SunOS 5.10 Generic_144488-06 sun4u
701 SAPSR3
Oracle 11.2.0,.2
brbackup -w only_dbv -t online -c -u / -e 16
It generally runs ok, but today I got:
BR0280I BRBACKUP time stamp: 2011-04-20 11.20.47
BR0063I 5 of 11 files processed - 14900.039 of 73640.086 MB done
BR0204I Percentage done: 20.23%, estimated end time: 12:45
BR0001I **********________________________________________
BR0280I BRBACKUP time stamp: 2011-04-20 11.21.44
BR0281W BRBACKUP interrupted by signal 2
BR0269W Wait situation interrupted - probably cannot continue
BR0280I BRBACKUP time stamp: 2011-04-20 11.21.44
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
BR0280I BRBACKUP time stamp: 2011-04-20 11.21.45
BR0251W Function gets() failed at location BrConfEnter-1
BR0253W errno 5: I/O error
BR0255W Cannot read from standard input
BR0280I BRBACKUP time stamp: 2011-04-20 11.21.45
BR0261E BRBACKUP cancelled by signal 2
BR0056I End of database backup: befrzrsn.dbv 2011-04-20 11.21.46
BR0280I BRBACKUP time stamp: 2011-04-20 11.21.49
BR0054I BRBACKUP terminated with errors
1. Would you know what yould cause this Cannot read from standard input?
2. Is there a maximum number of process that can/should be passed to -e option?
Thanks in advance for your answer.

Hello Benoît,
if I understood correctly, your brbackup was not started interactively, but in background, by crontab or DB13 or something like that.
As you perhaps know, signal 2 usually means that the process was interrupted by a ctrl-C from keyboard. This should not happen for a background process.
It could be that someone played around with kill command.
I rather suspect some resource bottleneck.
Could you please check Unix kernel parameters (or whatever their equivalent in SunOS is called - I am not familiar with it).
Or any suspicious entries in Unix log files?
regards

Whenever i try and download itunes it says it cannot read from specified device, what can I do?

Whenever I try to download itunes it says it cannot read from specified device, what do I do?

Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

BRGUI: Connect WindowsXP to AIX: BR0255E Cannot read from standard input

Hi,
I configure brgui.properties and seam everything ok:
brgui.remote-0=D11 (rsh aixd11 -l orad11)
It connect to server, but in the footer of 2nd BRGUI screen (after login screen) it appears "Error: Cannot read from standard input" in red.
And some seconds later the application closes.
I see the log and it has the following:
BR0651I BRTOOLS 7.00 (16)
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0656I Choice menu 1 - please make a selection
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0255E Cannot read from standard input
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0654I BRTOOLS terminated with errors
Can anybody help? Maybe is it related with AIX files authorizations?
Thanks a lot!
Rui

Hi Rui,
Please take note on the following important points.
When you use the remote option, ensure that the environment on the
remote host is fully configured to use the BR*Tools, and that the remoteuser has the relevant database rights. You should also ensure that the
relevant environment files are actually called up during the remote
access.
and
In some cases, BrGui does not work with the Remote Shell rsh from from
Microsoft Windows XP Service Pack 2 or Microsoft Windows Server 2003
Service Pack 1. See Microsoft Support Article ID 896336. Microsoft
offers a hotfix for this purpose. As a workaround, use the rsh from the
previous Service Pack. This is located in the uninstall directory after
the Service Pack has been installed. You can also enter the complete
path in the relevant remote call.
Hope the above information helps.

Cannot Read From Registry - Need to save and load config

I have code the I have tested in other programs. I cannot read or write to the registry from a plugin. Any ideas?
Any suggestions for the best way to save and load config information?
Thanks!!!

Hi Srikanth,
Thank you for responding.
I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   , 2LIS_13_VDITM   , 2LIS_12_VCHDR , 2LIS_11_VAITM .
And I need to delete data from 2LIS_13_VDITM data source . How Can I proceed for the current issue   ?
Please suggest   ...
Thank you ,
Utpal

Itunes cannot read from or write to disk

So I just got this new notebook, and I moved all my itunes files over and tried to sync my ipod touch. It didn't work out so well... I got an error message saying that the disk could not be found, it begins to sync and then I got an additional message saying that the ipod could not be read from or written to.

Pack the old ipod up and send it back, soon or they will charge you $119 on your Credit Card. Sounds like there may be a possibility that your ipod shuffle may not be communicating with your USB ports properly. Try running the ipod updater software and try restoring the ipod. If that does not work, test your shuffle on another computer to see if it may not be an issue with the USB port. I know the 20GB works fine...But it still just may not communicate properly for some reason. As for updating the shuffle, I create a playlist in my itunes and when I plug in my shuffle, it gives me an option to autofill. I just select the playlist I want loaded to my ipod and hit autofill...Which works just fine for me.

FRM40010:cannot read from module

Similar Messages

Maybe you are looking for